Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 07/2010 Standardiseringsprosjekter og nye standarder Listenummer: 07/2010 Side: 1 av 151

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren Transportable gassflasker - Kjennetegn (unntatt LPG) - Del 3: Fargekoding Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Kommentarfrist: pren Transportable gassflasker - Kjennetegn (unntatt LPG) - Del 3: Fargekoding Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Kommentarfrist: pren ISO 2129 Geometriske produktspesifikasjoner (GPS) - Angivelse av mål og toleranser - Mekaniske tekniske tegninger (ISO/DIS 2129:20008) Geometrical Product Specifications (GPS) - Indication of dimensions and tolerances - Mechanical engineering drawings (ISO/DIS 2129:2008) Kommentarfrist: pren ISO 9092 Tekstiler - Ikke-vevd materiale (florstoff) - Definisjon (ISO/DIS 9092:2010) Textiles - Nonwoven - Definition (ISO/DIS 9092:2010) Kommentarfrist: pren ISO Technical product documentation - Vocabulary - Terms relating to technical drawings, product definition and related products (ISO/DIS 10209:2010) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 7010:2003/DAmd 66 Safety sign E016: Emergency window with escape ladder Kommentarfrist: ISO 7010:2003/DAmd 67 Safety sign E017: Rescue window Kommentarfrist: ISO 7010:2003/DAmd 68 Safety sign E018: Turn anticlockwise to open Kommentarfrist: ISO 7010:2003/DAmd 69 Safety sign E019: Turn clockwise to open Kommentarfrist: Listenummer: 07/2010 Side: 2 av 151

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2003/DAmd 70 Safety sign M024: Use this walkway Kommentarfrist: ISO 7010:2003/DAmd 71 Safety sign P025: Do not use this incomplete scaffold Kommentarfrist: ISO 7010:2003/DAmd 72 Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir Kommentarfrist: ISO 7010:2003/DAmd 73 Safety sign P027: Do not use this lift for people Kommentarfrist: ISO 7010:2003/DAmd 74 Safety sign P028: Do not wear gloves Kommentarfrist: ISO 7010:2003/DAmd 75 Safety sign P029: No photography Kommentarfrist: ISO 7010:2003/DAmd 76 Safety sign W026: Warning; Battery charging Kommentarfrist: ISO 7010:2003/DAmd 77 Safety sign W029: Warning; Pressurized cylinder Kommentarfrist: ISO 7010:2003/DAmd 78 Safety sign M025: Infants must be protected with opaque eye protection Kommentarfrist: ISO 7010:2003/DAmd 79 Safety sign M026: Use protective apron Kommentarfrist: ISO 7010:2003/DAmd 80 Safety sign P030: Do not tie knots in rope Kommentarfrist: ISO 7010:2003/DAmd 81 Safety sign P031: Do not alter the switch Kommentarfrist: Listenummer: 07/2010 Side: 3 av 151

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2003/DAmd 82 Safety sign P032: Do not use for face grinding Kommentarfrist: ISO 7010:2003/DAmd 83 Safety sign P033: Do not use for wet grinding Kommentarfrist: ISO 7010:2003/DAmd 84 Safety sign P034: Do not use with hand-held grinding machine Kommentarfrist: ISO 12756:1998/DAmd 1 Viscosity of the ink Kommentarfrist: ISO/DIS 8965 Logging industry -- Technology -- Terms and definitions Kommentarfrist: ISO/DIS 9092 Textiles -- Nonwoven -- Definition Kommentarfrist: ISO/DIS Technical product documentation -- Vocabulary -- Terms relating to technical drawings, product definition and related products Kommentarfrist: ISO/DIS Glass in building -- Curved glass -- Part 1: Terminology and definitions Kommentarfrist: ISO/DIS Photography -- Electronic still-picture imaging -- Terminology Kommentarfrist: ISO/DIS Electronic document management -- Vocabulary -- Part 1: Electronic document imaging Kommentarfrist: ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles Kommentarfrist: Listenummer: 07/2010 Side: 4 av 151

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 2: Guidelines and functional requirements for records in electronic office environments Kommentarfrist: ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems Kommentarfrist: ISO/DIS Round and sawn timber -- Vocabulary Kommentarfrist: ISO/DIS Språkressurser -- Rammeverk for flerspråklig informasjon Linguistic resources management -- Multilingual information framework Kommentarfrist: ISO/DIS Renseutstyr for luft og andre gasser -- terminologi Cleaning equipment for air and other gases -- Terminology Kommentarfrist: ISO/DIS Technical product documentation -- Document types Kommentarfrist: ISO-standarder ISO 2146:2010 Information and documentation -- Registry services for libraries and related organizations Erstatter A00008:20: ISO :2010 Layout key for trade documents -- Part 1: Paper-based documents Erstatter A00008:20: ISO :2010 Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 5: Cooling systems Erstatter A00008:20: ISO :2010 Reciprocating internal combustion engines -- Vocabulary of components and systems -- Part 9: Control and monitoring systems Erstatter A00008:20: Listenummer: 07/2010 Side: 5 av 151

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO :2010 Optics and photonics -- Optical coatings -- Part 1: Definitions Erstatter A00008:20: ISO 10579:2010 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Non-rigid parts Erstatter A00008:20: ISO :2010 Specification for diagrams for process industry -- Part 1: General rules ISO :2010 Industrial automation systems and integration -- Open technical dictionaries and their application to master data -- Part 2: Vocabulary Erstatter A00008:20: ISO 28238:2010 Compression and injection moulds -- Components for gating systems ISO/TS :2009 Industrial automation systems and integration -- Open technical dictionaries and their application to master data -- Part 2: Vocabulary Rapporter fra CEN (CR) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics CEN/TS 15810:2008 Grafiske symboler for bruk på utstyr i integrerte tekniske bygningsinstallasjoner ITB Graphical symbols for use on integrated building automation equipment CEN/TS 15989:2010 Kjøretøy og annet utstyr for brannbekjempelse - Symboler til bruk på kontrollpaneler og lignende Firefighting vehicles and equipment - Symbols for operator controls and other displays Listenummer: 07/2010 Side: 6 av 151

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon Fastsatte norske standarder NS-EN 15826:2009 Glasserte emaljer og porselensemaljer - Terminologi Vitreous and porcelain enamels - Terminology NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) Tilbaketrukne norske standarder NS-EN 375:2001 Informasjon fra produsenten av in vitro diagnostiske reagenser til profesjonell bruk Information supplied by the manufacturer with in vitro diagnostic reagents for professional use NS-EN ISO :1994 Tannpleie - Terminologi - Del 5: Termer i forbindelse med prøving (ISO :1989) Dental vocabulary - Part 5: Terms associated with testing (ISO :1989) NS-ISO :1989 Tannpleie - Terminologi - Del 1: Generelle og kliniske termer - (= EN :1991) (ISO :1989) Dental vocabulary - Part 1: General and clinical terms - (= EN :1991) (ISO :1989) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Protection Profile for Secure signature creation device - Part 2: Device with key generation Kommentarfrist: pren Road transport and traffic telematics - ESafety - ECall minimum set of data Kommentarfrist: pren Intelligent transport systems - ESafety - ECall high level application requirements (HLAP) Kommentarfrist: pren Intelligent transport systems - ESafety - Pan European ecall-operating requirements Kommentarfrist: Listenummer: 07/2010 Side: 7 av 151

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren Provision of aviation security services Kommentarfrist: pren ISO Geografiske datafiler - GDF5.0 (ISO/DIS 14825:2010) Geographic Data Files - GDF5.0 (ISO/DIS 14825:2010) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Recreational diving services -- Requirements for the conduct of snorkelling excursions (service provision) Kommentarfrist: ISO/DIS Recreational diving services -- Requirements for the training of recreational snorkelling guides Kommentarfrist: ISO/DIS Intelligent transport systems -- Geographic Data Files (GDF) -- Overall data specification Kommentarfrist: ISO/DIS Geographic Data Files - GDF5.0 Kommentarfrist: ISO-standarder ISO 15622:2010 Intelligent transport systems -- Adaptive Cruise Control systems -- Performance requirements and test procedures Erstatter A00008:20: ISO 21217:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Architecture ISO 25112:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Mobile wireless broadband using IEEE ISO 25113:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Mobile wireless broadband using HC-SDMA ISO 28640:2010 Random variate generation methods Listenummer: 07/2010 Side: 8 av 151

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TR 11766:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Security considerations for lawful interception ISO/TS 10004:2010 Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring ISO/TS 13141:2010 Electronic fee collection -- Localisation augmentation communication for autonomous systems Rapporter fra CEN (CR) CEN ISO/TS 12813:2009 Elektronisk avgiftsinnkreving (EFC) - Kontroll av samsvar for kommunikasjon i autonome EFC systemer Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009) CEN ISO/TS 13141:2010 Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/DTS 13141:2009) Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/TS 13141:2010) CEN ISO/TS 17574:2009 Veitransporttelematikk - Elektronisk avgiftsinnkreving (EFC) - Retningslinjer for EFC sikkerhetsprofiler Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2009) CEN ISO/TS 25110:2008 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (OBU) med kortleser Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2008) CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR :2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR :2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points CEN/TS 15511:2008 Posttjenester - Tjenestekvalitet - Tilgjengelig informasjon om posttjenester Postal services - Quality of service - Information available on postal services Listenummer: 07/2010 Side: 9 av 151

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 15722:2009 Veitransporttelematikk - ESikkerhet - Mangler Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) CEN/TS 15873:2009 Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation CEN/TS 99001:2008 Business support - Support services provided to small enterprises - Terminology, quality and performance Fastsatte norske standarder NS-EN 14434:2010 Tavler for undervisningsinstitusjoner - Ergonomiske, tekniske og sikkerhetsmessige krav og prøvingsmetoder Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods Tilbaketrukne norske standarder NS-EN 14434:2004 Tavler for undervisningsinstitusjoner - Ergonomiske, tekniske og sikkerhetsmessige krav og prøvingsmetoder Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods NS-EN 14434:2004/AC:2008 Rettelsesblad AC - Tavler for undervisningsinstitusjoner - Ergonomiske, tekniske og sikkerhetsmessige krav og prøvingsmetoder Corrigendum AC - Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods 07 Matematikk. Naturvitenskap ISO-standarder ISO/TS :2010 Microbiology of food and animal feeding stuffs -- Horizontal method for detection and enumeration of Campylobacter spp. -- Part 3: Semi-quantitative method Rapporter fra CEN (CR) CEN ISO/TS :2010 Fôr- og næringsmiddelmikrobiologi Horisontal metode for bestemmelse og telling av Campylobacter ssp. Del 3: Semikvantitativ bestemmelse Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method (ISO/TS :2010) CEN ISO/TS :2009 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS :2009) Listenummer: 07/2010 Side: 10 av 151

11 07 Matematikk. Naturvitenskap CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TR 15996:2010 Hydrometry - Measurement of snow water equivalent using snow mass registration devices CEN/TS 15790:2008 Dyrefôr - PCR typing av probiotiske Saccharomyces cerevisiae (gjær) Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO :2009/prA1 Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav - Endringsblad 1 (ISO :2009/DAM 1:2010) Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements - Amendment 1 (ISO :2009/DAM 1:2010) Kommentarfrist: EN ISO 15912:2006/prA1 Tannpleie - Støpeinvestment og varmebestandig modellmateriale - Endringsblad 1 (ISO 15912:2006/DAM 1:2010) Dentistry - Casting investments and refractory die materials - Amendment 1 (ISO 15912:2006/DAM 1:2010) Kommentarfrist: EN ISO 21671:2006/prA1 Tannpleie - Roterende poleringsinstrumenter - Endringsblad 1 (ISO 21671:2006/DAM 1:2009) Dentistry - Rotary polishers - Amendment 1 (ISO 21671:2006/DAM 1:2009) Kommentarfrist: EN ISO 24234:2004/prA1 Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/DAM 1:2010) Kommentarfrist: pren Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher Kommentarfrist: pren Patient handling equipment used in road ambulances - Part 4: Mechanical assisted transfer chair Kommentarfrist: Listenummer: 07/2010 Side: 11 av 151

12 11 Helsevesen, Teknikk pren Patient handling equipment used in road ambulances - Part 5: Stretcher support Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1) Kommentarfrist: pren Kjemiske desinfeksjonsmidler og antiseptiske midler - Kvantitativ suspensjonstest for evaluering av bakteriedrepende aktivitet i det medisinske området - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1) Kommentarfrist: pren ISO Dentistry - Root-canal instruments - Part 5: Shaping and cleaning instruments (ISO/DIS :2010) Kommentarfrist: pren ISO Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 1: Product identification and electronic catalogue product hierarchy (ISO/DIS :2010) Kommentarfrist: pren ISO In vitro diagnostisk medisinsk utstyr - Stabilitetsprøving av in vitro diagnostiske reagenser (ISO/DIS 23640:2009) In vitro diagnostic medical devices - Stability testing of in vitro diagnostic reagents (ISO/DIS 23640:2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1 Kommentarfrist: ISO 15912:2006/DAmd 1 Kommentarfrist: ISO 21671:2006/DAmd 1 Kommentarfrist: ISO 24234:2004/DAmd 1 Requirements for marking and manufacturer's instructions concerning mercury Kommentarfrist: ISO/DIS Dentistry -- Root-canal instruments -- Part 5: Shaping and cleaning instruments Kommentarfrist: Listenummer: 07/2010 Side: 12 av 151

13 11 Helsevesen, Teknikk ISO/DIS Ophthalmic optics -- Spectacle frames and sunglasses electronic catalogue and identification -- Part 1: Product identification and electronic catalogue product hierarchy Kommentarfrist: ISO/DIS Prefilled syringes -- Part 2: Plunger stoppers for dental local anaesthetic cartridges Kommentarfrist: ISO/DIS Prefilled syringes -- Part 5: Plunger stoppers for injectables Kommentarfrist: ISO/DIS Implants for surgery -- Retrieval and analysis of surgical implants -- Part 1: Retrieval and handling Kommentarfrist: ISO/DIS Pen systems -- Part 2: Plungers stoppers for pen-injectors for medical use Kommentarfrist: ISO/DIS Dentistry -- Physical properties of manual toothbrushes Kommentarfrist: ISO/DIS In vitro diagnostic medical devices -- Stability testing of in vitro diagnostic reagents Kommentarfrist: ISO-standarder ISO 7885:2010 Dentistry -- Sterile injection needles for single use Erstatter A00008:20: ISO :2010 Infusion equipment for medical use -- Part 2: Closures for infusion bottles Erstatter A00008:20:033078,A00008:20: ISO :2010 Biological evaluation of medical devices -- Part 16: Toxicokinetic study design for degradation products and leachables Erstatter A00008:20: ISO :2010 Implants for surgery -- Active implantable medical devices -- Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) Listenummer: 07/2010 Side: 13 av 151

14 11 Helsevesen, Teknikk ISO 15747:2010 Plastic containers for intravenous injections Erstatter A00008:20: ISO :2010 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers ISO 27186:2010 Active implantable medical devices -- Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements ISO 27427:2010 Anaesthetic and respiratory equipment -- Nebulizing systems and components Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TS :2008 Sterilisering av helsetjenesteprodukter Etylenoksid Del 2: Retningslinjer for anvendelse av ISO (ISO/DTS :2008) Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO (ISO/TS :2008) CEN ISO/TS :2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO (ISO/TS :2008/Cor 1:2009) CEN ISO/TS :2009 Sterilisering av helsetjenesteprodukter - Fuktig varme - Del 2: Veiledning for bruk av ISO (ISO/DTS :2008) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO/TS :2009) CEN ISO/TS 22367:2010 Medisinske laboratorier - Reduksjon av feil ved risikostyring og kontinuerlig forbedring(iso/ts 22367:2008, inkludert Cor 1:2009) Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) CEN/TR 12401:2009 Tannpleie - Veiledning for klassifisering av medisinsk utstyr brukt i tannpleien Dentistry - Guidance on the classification of dental devices and accessories CEN/TR 15753:2008 Emballasje - Pakningsvedlegg til medisiner - Braille og andre skriftformater for synshemmede Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people CEN/TR 15831:2009 Metode for kompresjonsprøving av strømper til medisinsk bruk Method for testing compression in medical hosiery Listenummer: 07/2010 Side: 14 av 151

15 11 Helsevesen, Teknikk CEN/TR 15913:2009 Kriterier for utforming av tilskueranlegg for tilskuere med nedsatt funksjonsevne Spectator facilities - Layout criteria for viewing area for spectators with special needs CEN/TS 15209:2008 Følbare overflateindikatorer på belegningsprodukter av betong, tegl og naturstein Tactile paving surface indicators produced from concrete, clay and stone Fastsatte norske standarder NS-EN :1995+A2:2009 Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Non-invasive sphygmomanometers - Part 1: General requirements NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) NS-EN ISO :2007/A1:2010 Endringsblad A1 - Sentralgassanlegg for medisinske gasser - Del 1: Sentraler og fordelingsnett for komprimerte medisinske gasser og vakuum - Endringsblad 1: Krav til ut- og inntaksposter for vakuum festet på medisinske forsyningsenheter med operatørstyrt dosering, forbundet til anlegget ved fleksible slanger (ISO :2007/Amd 1:2010) Amendment A1 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 1: Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses (ISO :2007/Amd 1:2010) NS-EN ISO :2009 Injeksjonsbeholdere og tilbehør - Del 1: Hetteglass laget av glassrør (ISO :2009) Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO :2009) NS-EN ISO 9801:2009 Øyeoptiske instrumenter - Prøvekasselinser (ISO 9801:2009) Ophthalmic instruments - Trial case lenses (ISO 9801:2009) NS-EN ISO 15752:2010 Øyeoptiske instrumenter - Endoilluminatorer- Grunnleggende krav og prøvingsmetoder for sikkerhet ved optisk bestråling (ISO 15752:2010) Ophthalmic instruments - Endoilluminators - Fundamental requirements and test methods for optical radiation safety (ISO 15752:2010) NS-EN ISO :2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 1: Termer, definisjoner og generelle krav (ISO :2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO :2009) Listenummer: 07/2010 Side: 15 av 151

16 11 Helsevesen, Teknikk NS-EN ISO :2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (Merking) - Del 2: In vitro-diagnostiske reagenser for yrkesbruk (ISO :2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO :2009) NS-EN ISO :2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 3: In vitro-diagnostiske instrumenter for yrkesbruk (ISO :2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO :2009) NS-EN ISO :2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 4: In vitro-diagnostiske reagenser for egenprøving (ISO :2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO :2009) NS-EN ISO :2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 5: In vitro-diagnostiske instrumenter for egenprøving (ISO :2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO :2009) NS-EN ISO 21533:2003/AC:2009 Rettelsesblad AC - Tannpleie - Sprøyter for intraligamentær injeksjon til gjenbruk - Teknisk rettelsesblad 1 (ISO 21533:2003/Cor 1:2009) Corrigendum AC - Dentistry - Reusable cartridge syringes intended for intraligamentary injections - Technical Corrigendum 1 (ISO 21533:2003/Cor 1:2009) Tilbaketrukne norske standarder NS-EN 375:2001 Informasjon fra produsenten av in vitro diagnostiske reagenser til profesjonell bruk Information supplied by the manufacturer with in vitro diagnostic reagents for professional use NS-EN 376:2002 Informasjon fra produsenten om in vitro-diagnostiske reagenser til selvtesting Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing NS-EN 591:2001 Bruksanvisning for utstyr til in vitro-diagnostisk bruk for fagpersonale Instructions for use for in vitro diagnostic instruments for professional use NS-EN 592:2002 Bruksanvisninger for in vitro-diagnostiske instrumenter til selvtesting Instructions for use for in vitro diagnostic instruments for self-testing Listenummer: 07/2010 Side: 16 av 151

17 11 Helsevesen, Teknikk NS-EN :1995 Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Non-invasive sphygmomanometers - Part 1: General requirements NS-EN :1995/A1:2002 Endringsblad A1 - Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Amendment A1 - Non-invasive sphygmomanometers - Part 1: General requirements NS-EN ISO :2004 Injeksjonsbeholdere og tilbehør - Del 1: Hetteglass laget av glassrør (ISO :2003) Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO :2003) NS-EN ISO 9801:1999 Øyeoptikk - Instrumenter - Prøvekasselinser (ISO 9801:1997) Ophthalmic instruments - Trial case lenses (ISO 9801:1997) NS-EN ISO 16061:2008 Instrumenter til bruk i forbindelse med ikke-aktive kirurgiske implantater - Generelle krav (ISO 16061:2008) Instrumentation for use in association with non-active surgical implants - General requirements (ISO 16061:2008) NS-ISO :1989 Tannpleie - Terminologi - Del 1: Generelle og kliniske termer - (= EN :1991) (ISO :1989) Dental vocabulary - Part 1: General and clinical terms - (= EN :1991) (ISO :1989) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren Prøving av brannmotstanden til tekniske installasjoner - Del 2: Brannspjeld Fire resistance tests for service installations - Part 2: Fire dampers Kommentarfrist: pren 1598 Helse og sikkerhet ved sveising og beslektede metoder - Transparente sveiseforheng, strips og mobile sveiseforheng for lysbuesveising Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes Kommentarfrist: pren 1839 Determination of explosion limits of gases and vapours Kommentarfrist: Listenummer: 07/2010 Side: 17 av 151

18 13 Miljøvern. Helsevern. Sikkerhet pren Stationary waste containers up to l, top lifted and bottom emptied - Part 3: Recommended lifting connections Kommentarfrist: pren Respiratory equipment - Self-contained re-breathing diving apparatus Kommentarfrist: pren Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence Kommentarfrist: pren Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence Kommentarfrist: pren Trykkavlastningssytemer for støveksplosjoner Dust explosion venting protective systems Kommentarfrist: pren Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry Kommentarfrist: pren Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy Kommentarfrist: pren Vernetøy - Hansker for fotballmålvakter Protective clothing - Gloves with protective effect for association football goal keepers Kommentarfrist: pren Pedestrian doorsets, industrial, commercial, garage doors and windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteristics Kommentarfrist: pren Water quality - Guidance standard on assessing the hydromorphological features of lakes Kommentarfrist: pren Intelligent transport systems - ESafety - Pan European ecall-operating requirements Kommentarfrist: Listenummer: 07/2010 Side: 18 av 151

19 13 Miljøvern. Helsevern. Sikkerhet pren Hyperbariske kamre - Spesifikke krav til brannslukke anlegg - Kontroll, installasjon og prøving Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing Kommentarfrist: pren Provision of aviation security services Kommentarfrist: pren Soil improvers and growing media - Determination of Aerobic biological activity - Self heating test for compost Kommentarfrist: pren ISO Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 5: Styrte trykkavlastningssystemer (CSPRS) (ISO/DIS :2009) Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO/DIS :2009) Kommentarfrist: pren ISO Akustikk - Audiometriske prøvingsmetoder - Del 3: Taleaudiometri (ISO/DIS :2010) Acoustics - Audiometric test methods - Part 3: Speech audiometry (ISO/DIS :2010) Kommentarfrist: pren ISO 9094 Small craft - Fire protection (ISO/DIS 9094:2010) Kommentarfrist: pren ISO Water quality - Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters (ISO/DIS 10870:2010) Kommentarfrist: pren ISO Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS :2009) Kommentarfrist: pren ISO Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas (ISO/DIS :2009) Kommentarfrist: pren ISO Ergonomics of the physical environment - Assessment by means of an environmental survey involving physical measurement of the environment and subjective responses of people (ISO/DIS 28802:2009) Kommentarfrist: Listenummer: 07/2010 Side: 19 av 151

20 13 Miljøvern. Helsevern. Sikkerhet pren ISO Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO/DIS 28803:2010) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1 Kommentarfrist: ISO/DIS Acoustics -- Audiometric test methods -- Part 3: Speech audiometry Kommentarfrist: ISO/DIS Water quality -- Guidelines for the selection of sampling methods and devices for benthic macroinvertebrates in fresh waters Kommentarfrist: ISO/DIS Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles Kommentarfrist: ISO/DIS Air quality -- Test method for filtration characterisation of cleanable filter media Kommentarfrist: ISO/DIS Soil quality -- Method to directly extract DNA from soil samples Kommentarfrist: ISO/DIS Water quality -- Determination of dissolved bromate -- Method using ion chromatography (IC) and post column reaction (PCR) Kommentarfrist: ISO/DIS Water quality -- Determination of measurement uncertainty based on validation data Kommentarfrist: ISO/DIS Soil quality -- Determination of selected coal-tar derived phenolic compounds using high performance liquid chromatography (HPLC) Kommentarfrist: ISO/DIS Reaction to fire tests -- Measurement of fundamental material properties using a fire propagation apparatus Kommentarfrist: Listenummer: 07/2010 Side: 20 av 151

21 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Validation method for fire gas analysis -- Part 1: Limits of detection and quantification Kommentarfrist: ISO/DIS Standard prøvingsmetode for å måle hastigheten på varmeavgivelse fra begrenset brennbare madrasser eller madrassett. Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets Kommentarfrist: ISO/DIS Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams Kommentarfrist: ISO/DIS Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry Kommentarfrist: ISO/DIS Fire safety engineering -- Guidance on fire risk assessment Kommentarfrist: ISO/DIS Soil quality -- Avoidance test for determining the quality of soils and effects of chemicals on behaviour -- Part 2: Test with collembolans (Folsomia candida) Kommentarfrist: ISO/DIS Akustikk - Statistisk fordeling av normal høreterskel under fritt-felt-lytteforhold Acoustics -- Statistical distribution of normal hearing thresholds under free-field listening conditions Kommentarfrist: ISO/DIS Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 8: Room method for measurement of the pollutant concentration parameter Kommentarfrist: ISO/DIS Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 9: Decontamination index Kommentarfrist: ISO-standarder ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities Erstatter A00008:20: Listenummer: 07/2010 Side: 21 av 151

22 13 Miljøvern. Helsevern. Sikkerhet ISO :2010 Fire detection and fire alarm systems -- Part 24: Sound-system loudspeakers ISO :2010 Ergonomics of human-system interaction -- Part 210: Human-centred design for interactive systems Erstatter A00008:20: ISO 11161:2007/Amd 1:2010 ISO :2010 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria Erstatter A00008:20: ISO 16972:2010 Respiratory protective devices -- Terms, definitions, graphical symbols and units of measurement ISO :2010 Ships and marine technology -- Marine environment protection: performance testing of oil skimmers -- Part 3: High viscosity oil ISO 27108:2010 Water quality -- Determination of selected plant treatment agents and biocide products -- Method using solid-phase microextraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) ISO :2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet ISO :2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet ISO :2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter ISO 29441:2010 Water quality -- Determination of total nitrogen after UV digestion -- Method using flow analysis (CFA and FIA) and spectrometric detection ISO/PAS 3930:2010 Instruments for measuring vehicle exhaust emissions -- Metrological and technical requirements; Metrological control and performance tests Erstatter A00008:20:030772,A00008:20: Listenummer: 07/2010 Side: 22 av 151

23 13 Miljøvern. Helsevern. Sikkerhet ISO/TR :2010 Basic human body measurements for technological design -- Part 2: Statistical summaries of body measurements from individual ISO populations ISO/TS 22939:2010 Soil quality -- Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates CEN Workshop Agreements CWA 16106:2010 PPE for Chemical, Biological, Radiological and Nuclear, (CBRN) Hazards CWA 16107:2010 Emergency Services Capability Framework Rapporter fra CEN (CR) CEN ISO/TR 15462:2009 Vannundersøkelse - Valg av bionedbrytningsprøvinger Water quality - Selection of tests for biodegradability (ISO/TR 15462:2006) CEN ISO/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of ph on leaching with initial acid/base addition (ISO/TS :2007) CEN/TR :2009 Brannventilasjonssystemer - Del 4: Installerte røykventilasjonsanlegg Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation Listenummer: 07/2010 Side: 23 av 151

24 13 Miljøvern. Helsevern. Sikkerhet CEN/TR :2008 Små renseanlegg for inntil 50 PE - Del 5: Filtreringsanlegg for forbehandlet avløpsvann Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems CEN/TR 13688:2008 Denne skal ikke ha norsk tittel Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling CEN/TR 14181:2010 Utslipp fra stasjonære kilder - Veiledning for anvendelse av EN 14181:2004 Stationary source emissions - Guidance on the application of EN 14181:2004 CEN/TR :2010 Kriminalitetforebygging - Byplanlegging og prosjektering av bygninger - Del 5: Bensinstasjoner Prevention of crime - Urban planning and building design - Part 5: Petrol stations CEN/TR :2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR :2009 Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles CEN/TR :2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 1: Krav og prøvingsmetoder for komponenter Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components CEN/TR :2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 2: Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance CEN/TR 15809:2008 Characterization of sludges - Hygienic aspects - Treatments CEN/TR 15822:2009 Plast - Biologisk nedbrytbare plaster i eller på bakken - Gjennvinning, fjerning og relaterte miljøsaker Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues CEN/TR 15983:2010 Utslipp fra stasjonære kilder - Veiledning for anvendelse av EN 14181:2004 Stationary source emissions - Guidance on the application of EN 14181:2004 Listenummer: 07/2010 Side: 24 av 151

25 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 15985:2010 Frivillig sertifisering av råvaren Thermal insulating products - Factory made products of expanded polystyrene (EPS) - Voluntary certification of the raw material CEN/TS 14243:2010 Materials produced from end of life tyres - Specification of categories based on their dimension(s) and impurities and methods for determining their dimension(s) and impurities CEN/TS 14816:2008 Faste brannslokkesystemer - Vannspraysystemer - Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Water spray systems - Design, installation and maintenance CEN/TS 14972:2008 Faste brannslokkesystemer - Vanntåkesystemer - Dimensjonering og installering Fixed firefighting systems - Watermist systems - Design and installation CEN/TS :2008 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method CEN/TS :2008 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method CEN/TS 15366:2009 Utstyr for drift og vedlikehold av veier om vinteren Absorpsjonsmidler for anvendelse på veier Winter and road service area maintenance equipment - Solid absorbents intended for road usage CEN/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) CEN/TS 15989:2010 Kjøretøy og annet utstyr for brannbekjempelse - Symboler til bruk på kontrollpaneler og lignende Firefighting vehicles and equipment - Symbols for operator controls and other displays CEN/TS :2009 Jernbane - Brannsikring av jernbanevogner - Del 4: Krav til brannsikring for konstruksjonsmessig utforming av jernbanevogner Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design CEN/TS :2009 Jernbane - Brannsikring av jernbanevogner - Del 6: Tilleggstiltak for brannsikring Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems Listenummer: 07/2010 Side: 25 av 151

26 13 Miljøvern. Helsevern. Sikkerhet Fastsatte norske standarder NS-EN 207:2009 Øyevern - Filtre og øyevern mot laserstråling (laser-øyevern) Personal eye-protection equipment - Filters and eye-protectors against laser radiation (laser eye-protectors) NS-EN 208:2009 Øyevern - Øyevern for tilpasningsarbeid på lasere og lasersystemer (lasertilpasningsøyevern) Personal eye-protection - Eye-protectors for adjustment work on lasers and laser systems (laser adjustment eye-protectors) NS-EN 838:2010 Arbeidsplassluft - Prosedyrer for måling av gass og damp ved bruk av diffusjon - Krav og prøvingsmetoder Workplace exposure - Procedures for measuring gases and vapours using diffusive samplers - Requirements and test methods NS-EN 1076:2009 Arbeidsplassluft - Prosedyre for måling av gass og damp ved bruk av diffusjon - Krav og prøvingsmetoder Workplace exposure - Procedures for measuring gases and vapours using pumped samplers - Requirements and test methods NS-EN :2004+NA:2010 Eurokode 5: Prosjektering av trekonstruksjoner - Del 1-2: Brannteknisk dimensjonering Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design NS-EN :2004/NA:2010 Nasjonalt tillegg NA - Eurokode 5: Prosjektering av trekonstruksjoner - Del 1-2: Brannteknisk dimensjonering National Annex NA - Eurocode 5: Design of timber structures - Part 1-2: General - Structural fire design NS-EN :2005+NA:2010 Eurokode 6: Prosjektering av murkonstruksjoner - Del 1-2: Brannteknisk dimensjonering Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design NS-EN :2005/NA:2010 Nasjonalt tillegg NA - Eurokode 6: Prosjektering av murkonstruksjoner - Del 1-2: Brannteknisk dimensjonering National Annex NA - Eurocode 6: Design of masonry structures - Part 1-2: General rules - Structural fire design NS-EN :2007+NA:2010 Eurokode 9: Prosjektering av aluminiumskonstruksjoner - Del 1-2: Brannteknisk dimensjonering Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design NS-EN :2007/NA:2010 Nasjonalt tillegg NA - Eurokode 9: Prosjektering av aluminiumskonstruksjoner - Del 1-2: Brannteknisk dimensjonering National Annex NA - Eurocode 9: Design of aluminium structures - Part 1-2: Structural fire design NS-EN 14404:2004+A1:2010 Personlig verneutstyr - Kneputer for knestående arbeid Personal protective equipment - Knee protectors for work in the kneeling position Listenummer: 07/2010 Side: 26 av 151

27 13 Miljøvern. Helsevern. Sikkerhet NS-EN 14434:2010 Tavler for undervisningsinstitusjoner - Ergonomiske, tekniske og sikkerhetsmessige krav og prøvingsmetoder Writing boards for educational institutions - Ergonomic, technical and safety requirements and their test methods NS-EN :2010 Karakterisering av slam - Filtreringsegenskaper - Del 4: Bestemmelse av dreneringsegenskaper til kondisjonert slam Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges NS-EN 15843:2010 Vannundersøkelse - Veiledning for å vurdere endringer i hydromorfologiske egenskaper til elver Water quality - Guidance standard on determining the degree of modification of river hydromorphology NS-EN ISO :2009 Akustikk - Audiometriske prøvingsmetoder - Del 2: Audiometri med rentone- og smalbåndsignaler i lydfelt (ISO :2009) Acoustics - Audiometric test methods - Part 2: Sound field audiometry with pure-tone and narrow-band test signals (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 1: Vinkel- og vertikalslipemaskiner (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 1: Angle and vertical grinders (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 2: Slående muttertrekkere, muttertrekkere og skrutrekkere (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 3: Pussemaskiner og slipere med roterende, sirkulerende og tilfeldig roterende bevegelser (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 3: Polishers and rotary, orbital and random orbital sanders (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 5: Boremaskiner og slagboremaskiner (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 5: Drills and impact drills (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 6: Stampere (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 6: Rammers (ISO :2009) NS-EN ISO :2009 Kraftdrevet håndverktøy - Prøvingsmetoder for måling av vibrasjonsemisjon - Del 7: Niblere og skjæremaskiner (ISO :2009) Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 7: Nibblers and shears (ISO :2009) Listenummer: 07/2010 Side: 27 av 151