Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 9/2013 Standardiseringsprosjekter og nye standarder Listenummer: 9/2013 Side: 1 av 113

2 00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - internasjonale (ISO) ISO/DIS Geotextiles and geotextile-related products - Method of abrasion damage simulation (sliding block test) - Kommentarfrist: Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 1101:2013/prA1 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012/DAM 1:2013) Kommentarfrist: EN ISO 4287:1998/prA2 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 2 (ISO 4287:1997/DAM 2:2013) Kommentarfrist: pren Bevaring av kulturminner Ordliste over tekniske termer som omhandler mørtel til murverk, fuger og puss brukt i kulturminner Conservation of Cultural Heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage Kommentarfrist: pren Bio-based products - Vocabulary Kommentarfrist: pren ISO rev Gassflasker - Terminologi (ISO/DIS 10286:2013) Gas cylinders - Terminology (ISO/DIS 10286:2013) Kommentarfrist: pren ISO Geosynthetics - Part 1: Terms and definitions (ISO/DIS :2013) Kommentarfrist: pren ISO Geosynthetics - Part 2: Symbols and Pictograms (ISO/DIS :2013) Kommentarfrist: pren ISO Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: Listenummer: 9/2013 Side: 2 av 113

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon pren ISO Translation Services - Requirements for translation services (ISO/DIS 17100:2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 9849 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary [Revision of first edition (ISO 9849:1991)] Kommentarfrist: ISO/DIS Gas cylinders -- Terminology Kommentarfrist: ISO/DIS Gas cylinders -- Terminology Kommentarfrist: ISO/DIS Geosynthetics -- Part 1: Terms and definitions Kommentarfrist: ISO/DIS Geosynthetics -- Part 2: Symbols and Pictograms Kommentarfrist: ISO/DIS Information and documentation - Library performance indicators Kommentarfrist: ISO/DIS Electronic imaging -- Vocabulary -- Part 2: Document workflow Kommentarfrist: ISO/DIS Methods and procedures for assessing the impact of libraries Kommentarfrist: ISO/DIS Dentistry -- Vocabulary of oral implantology Kommentarfrist: ISO/DIS Translation Services -- Requirements for translation services Kommentarfrist: Listenummer: 9/2013 Side: 3 av 113

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Water safety signs and beach safety flags -- Part 3: Guidance for the use of water safety signs and beach safety flags Kommentarfrist: ISO/DIS Language resource management -- Semantic annotation framework (SemAF) -- Part 4: Semantic roles (SemAF-SR) Kommentarfrist: ISO-standarder ISO 1629:2013 Rubber and latices -- Nomenclature Erstatter A00008:20:021814,A00008:20: ISO :2013 Statistics -- Vocabulary and symbols -- Part 3: Design of experiments Erstatter A00008:20: ISO 7001:2007/Amd 1:2013 Erstatter A00008:20:057134,A00008:20:057137,A00008:20:057139,A00008:20:057140,A00008:20:057143,A00008:20:057144,A00008:20: ,A00008:20:057146,A00008:20:057147,A00008:20:057148,A00008:20:057149,A00008:20:057150,A00008:20:057151,A000 08:20:057153,A00008:20:057154, ISO 10377:2013 Consumer product safety -- Guidelines for suppliers Rapporter fra CEN (CR) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Fastsatte norske standarder NS-EN ISO 5526:2013 Korn, belgfrukter og annet matkorn - Nomenklatur (ISO 5526:2013) Cereals, pulses and other food grains - Nomenclature (ISO 5526:2013) Listenummer: 9/2013 Side: 4 av 113

5 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: pren Estetisk kirurgi og estetisk ikke-kirurgiske medisinske tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: pren Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant Kommentarfrist: pren Professional indoor UV exposure services - Part 3: Requirements for the provision of services Kommentarfrist: pren Bio-based products - Vocabulary Kommentarfrist: pren Accessibility requirements for public procurement of ICT products and services in Europe Kommentarfrist: pren ISO Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Control charts -- Part 1: General guidelines Kommentarfrist: ISO/DIS 9362 Banking - Banking telecommunication messages _ Bank identifier codes Kommentarfrist: ISO/DIS 9362 Banking -- Banking telecommunication messages -- Business identifier code (BIC) Kommentarfrist: Listenummer: 9/2013 Side: 5 av 113

6 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 1: General requirements and conceptual model Kommentarfrist: ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 3: Dynamic location references (dynamic profile) Kommentarfrist: ISO/DIS Non-destructive testing -- Evaluation of vision acuity of NDT personnel Kommentarfrist: ISO/DIS Intelligent transport systems -- Communications access for land mobiles (CALM) -- Architecture Kommentarfrist: ISO/DIS Intelligent transport systems -- Communications access for land mobiles (CALM) -- Architecture Kommentarfrist: ISO/DIS Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 3: Vehicle data Kommentarfrist: ISO/DIS Intelligent transport systems -- Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 3: Vehicle data Kommentarfrist: ISO-standarder ISO :2013 Statistics -- Vocabulary and symbols -- Part 3: Design of experiments Erstatter A00008:20: ISO 10377:2013 Consumer product safety -- Guidelines for suppliers ISO 10393:2013 Consumer product recall -- Guidelines for suppliers Listenummer: 9/2013 Side: 6 av 113

7 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TR 14806:2013 Intelligent transport systems -- Public transport requirements for the use of payment applications for fare media ISO/TS 17931:2013 Intelligent transport systems -- Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS ISO/TS 25110:2013 Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC) Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TS 25110:2013 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013) Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013) CEN ISO/TR ISO :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS :2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS 13141:2010/AC:2013 Electronic fee collection - Localisation augmentation communication for autonomous systems - Technical Corrigendum 1 (ISO/TS 13141:2010/Cor 1:2013) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) Listenummer: 9/2013 Side: 7 av 113

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS :2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TDS :2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2011) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TDS :2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2011) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS :2012) CEN ISO/TS :2010/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2013) CEN ISO/TS :2011/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS :2011/Cor 1:2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS :2013) CEN/TR :2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions Listenummer: 9/2013 Side: 8 av 113

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing Listenummer: 9/2013 Side: 9 av 113

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Fastsatte norske standarder NS-EN :2013 Aerospace series - Quality management systems - Part 001: Requirements for Aviation, Space, and Defence Quality Management System Certification Programs 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (ISO/DIS :2013) Kommentarfrist: pren ISO Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (ISO/DIS :2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli -- Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide Kommentarfrist: ISO-standarder ISO/TS 17200:2013 Nanotechnology -- Nanoparticles in powder form -- Characteristics and measurements Rapporter fra CEN (CR) CEN ISO/TS :2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2011) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS :2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS :2012) Listenummer: 9/2013 Side: 10 av 113

11 07 Matematikk. Naturvitenskap CEN ISO/TS :2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 1: Metode for kvantitative bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 1: Method for quantification (ISO/TS :2013, Corrected Version ) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 2: Metode for kvalitativ bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 2: Method for qualitative detection (ISO/TS :2013, Corrected Version ) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TS :2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment Listenummer: 9/2013 Side: 11 av 113

12 07 Matematikk. Naturvitenskap CEN/TS :2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Fastsatte norske standarder NS-EN ISO :2013 Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 6: Spesielle regler for forbehandling av prøver tatt ut ved primært produksjonstrinn (ISO :2013) Microbiology of food and animal feed - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken at the primary production stage (ISO :2013) NS-EN ISO 13307:2013 Fôr- og næringsmiddelmikrobiologi - Primært produksjonstrinn - Prøvetakingsteknikker (ISO 13307:2013) Microbiology of food and animal feed - Primary production stage - Sampling techniques (ISO 13307:2013) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO :2009/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 1: Krav til materialer, sterile barrieresystemer og emballasjesystemer - Endringsblad 1 (ISO :2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems - Amendment 1 (ISO :2006/DAM 1:2013) Kommentarfrist: EN ISO :2006/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 2: Krav til formgiving, forsegling og sammensetting - Endringsblad 1 (ISO :2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes - Amendment 1 (ISO :2006/DAM 1:2013) Kommentarfrist: EN ISO :2006/prA1 Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses (ISO :2006/DAM 1:2013) Kommentarfrist: EN ISO :2006/prA1 Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses (ISO :2006/DAM 1:2013) Kommentarfrist: pren 285 Sterilisering - Vanndampsterilisatorer - Store sterilisatorer Sterilization - Steam sterilizers - Large sterilizers Kommentarfrist: Listenummer: 9/2013 Side: 12 av 113

13 11 Helsevesen, Teknikk pren Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties Kommentarfrist: pren Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation Kommentarfrist: pren Ambulanser og ambulanseutstyr - Luftambulanser - Del 1: Krav til medisinsk utstyr i luftambulanser Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances Kommentarfrist: pren Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: pren Estetisk kirurgi og estetisk ikke-kirurgiske medisinske tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of bactericidal and yeasticidal activity on nonporous surfaces with mechanical action employing wipes in the medical area (4- field test) - Test method and requirements (phase 2, step 2) Kommentarfrist: pren Chemical disinfectants and antiseptics - Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: pren ISO Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO/DIS :2013) Kommentarfrist: pren ISO rev Dentistry - Dental units - Part 2: Media channels and connections (ISO/DIS :2013) Kommentarfrist: pren ISO Tannpleie - Ekstraksjonsstenger - Del 1: Generelle krav og prøvemetoder (ISO/DIS :2013) Dentistry - Extraction forceps - Part 3: Design and dimensions (ISO/DIS :2013) Kommentarfrist: Listenummer: 9/2013 Side: 13 av 113

14 11 Helsevesen, Teknikk pren ISO 9680 Tannpleie - Arbeidslamper for tannbehandling (ISO/DIS 9680:2013) Dentistry - Operating lights (ISO/DIS 9680:2013) Kommentarfrist: pren ISO rev Dentistry - Single-use cartridges for local anaesthetics (ISO/DIS 11499:2013) Kommentarfrist: pren ISO rev Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO/DIS 11978:2013) Kommentarfrist: pren ISO Oftalmiske implantater - Intraokulære linser - Del 6: Holdbarhet og stabilitet ved transport (ISO/DIS :2013) Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability (ISO/DIS :2013) Kommentarfrist: pren ISO Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO/DIS 13116:2013) Kommentarfrist: pren ISO Oftalmisk optikk - Kontaktlinser og vedlikeholdsprodukter - Retningslinjer for bestemmelse av lagringstid (ISO/DIS 13212:2013) Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO/DIS 13212:2013) Kommentarfrist: pren ISO Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: pren ISO Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: pren ISO Medical Electrical Equipment - Part 2-70: Particular requirements for basic safety and essential performance of sleep apneoa breathing therapy equipment (ISO/DIS :2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1 Kommentarfrist: ISO :2006/DAmd 1 Kommentarfrist: Listenummer: 9/2013 Side: 14 av 113

15 11 Helsevesen, Teknikk ISO/DIS Wheelchairs - Technical systems and aids for disabled or handicapped persons -- Part 22: Set-up procedures Kommentarfrist: ISO/DIS Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum Kommentarfrist: ISO/DIS Dental units - Part 2: Air and water supply systems Kommentarfrist: ISO/DIS Dentistry -- Dental units -- Part 2: Media channels and connections Kommentarfrist: ISO/DIS Dentistry -- Extraction forceps -- Part 3: Design and dimensions Kommentarfrist: ISO/DIS 9680 Tannpleie - arbeidslampe for tannbehandling Dentistry -- Dental operating light Kommentarfrist: ISO/DIS 9680 Dentistry -- Operating lights Kommentarfrist: ISO/DIS Dental local anaesthetic cartridges Kommentarfrist: ISO/DIS Dentistry -- Single-use cartridges for local anaesthetics Kommentarfrist: ISO/DIS Optics and optical instruments - Contact lenses - Contact lenses and contact lens care products - Information to be supplied by the manufacturer for contact lens wearers Kommentarfrist: ISO/DIS Ophthalmic implants -- Intraocular lenses -- Part 6: Shelf-life and transport stability Kommentarfrist: Listenummer: 9/2013 Side: 15 av 113

16 11 Helsevesen, Teknikk ISO/DIS Optics and optical instruments - Intraocular lenses - Part 6: Determination of shelf-life and transport stability Kommentarfrist: ISO/DIS Retrieval and analysis of surgical implants -- Part 2: Analysis of retrieved surgical implants Kommentarfrist: ISO/DIS Dentistry -- Test Method for Determining Radio-Opacity of Materials Kommentarfrist: ISO/DIS Optics and optical instruments - Contact lenses and contact lens care products - Test methods for the determination of shelf-life and in-use stability Kommentarfrist: ISO/DIS Ophthalmic optics -- Contact lens care products -- Guidelines for determination of shelf-life Kommentarfrist: ISO/DIS Implants for surgery -- Wear of total knee-joint prostheses -- Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test Kommentarfrist: ISO/DIS Implants for surgery - Active implantable medical devices - Part 1: General requirements for safety, marking and information to be provided by the manufacturer Kommentarfrist: ISO/DIS Tannpleie - Kjeveortopedisk materiale - Metalltråd Dentistry -- Orthodontic materials -- Wires Kommentarfrist: ISO/DIS Dentistry -- Wires for use in orthodontics Kommentarfrist: ISO/DIS Dentistry -- Vocabulary of oral implantology Kommentarfrist: ISO/DIS Medical Electrical Equipment -- Part 2-70: Particular requirements for basic safety and essential performance of sleep apneoa breathing therapy equipment Kommentarfrist: Listenummer: 9/2013 Side: 16 av 113

17 11 Helsevesen, Teknikk ISO-standarder ISO/TR 24971:2013 Medical devices -- Guidance on the application of ISO CEN Workshop Agreements CWA 16642:2013 Health care services - Quality criteria for health checks Rapporter fra CEN (CR) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Fastsatte norske standarder NS-EN ISO :2013 Hjerte- og karimplantater - Hjerteklaffprotese - Del 3: Hjerteklafferstatninger implantert ved minimalt invasive teknikker (ISO :2013) Cardiovascular implants - Cardiac valve prostheses - Part 3: Heart valve substitutes implanted by transcatheter techniques (ISO :2013) NS-EN ISO :2007/A3:2013 Endringsblad A3 - Medisinske gassrørledningssystemer - Del 1: Rørledningssystemer for komprimerte medisinske gasser og vakuum - Terminologi knyttet til alarmsystemer (ISO :2007/Amd 3:2013) Amendment A3 - Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Terminology relating to alarm systems (ISO :2007/Amd 3:2013) NS-EN ISO :2013/A1:2013 Endringsblad A1 - Infusjonsutstyr til medisinsk bruk - Del 4: Infusjonsutstyr til engangsbruk med falltilførsel (ISO :2010/Amd 1:2013) Amendment A1 - Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO :2010/Amd 1:2013) NS-EN ISO :2006/A1:2013 Endringsblad A1 - Trykkregulatorer til bruk med medisinske gasser - Del 3: Trykkregulatorer integrert med sylinderventiler - Endringsblad 1: Filtrering og opplysninger som skal leveres av produsenten (ISO :2005/Amd 1:2013) Amendment A1 - Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves - Amendment 1: Filtration and information to be supplied by the manufacturer (ISO :2005/Amd 1:2013) NS-EN ISO :2013 Tannpleie - Basepolymerer - Del 1: Polymermaterialer for tannproteser (ISO :2013) Dentistry - Base polymers - Part 1: Denture base polymers (ISO :2013) Listenummer: 9/2013 Side: 17 av 113

18 11 Helsevesen, Teknikk NS-EN ISO :2013 Tannpleie - Basepolymerer - Del 2: Kjeveortopediske basepolymerer (ISO :2013) Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO :2013) Tilbaketrukne norske standarder NS-EN ISO :2008 Tannpleie - Basepolymerer - Del 1: Polymermaterialer for tannproteser (ISO :2008) Dentistry - Base polymers - Part 1: Denture base polymers (ISO :2008) NS-EN ISO :2008/AC:2009 Rettelsesblad AC - Tannpleie - Basepolymerer - Del 1: Polymermaterialer for tannproteser (ISO :2008/Cor 1:2009) Corrigendum AC - Dentistry - Base polymers - Part 1: Denture base polymers (ISO :2008/Cor 1:2009) NS-EN ISO :2010 Tannpleie - Basepolymerer - Del 2: Kjeveortopedisk basepolymerer (ISO :2010) Dentistry - Base polymers - Part 2: Orthodontic base polymers (ISO :2010) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO :2001/prA1 Mekaniske vibrasjoner - Måling og bedømmelse av hvordan håndoverførte vibrasjoner virker inn på mennesker - Del 2: Praktisk veiledning for måling på arbeidsplassen (ISO :2001/DAM 1:2013) Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace - Amendment 1 (ISO :2001/DAM 1:2013) Kommentarfrist: pren Fire detection and fire alarm systems - Part 11: Manual call points Kommentarfrist: pren Vernehansker mot kjemikalier og mikroorganismer - Del 2: Bestemmelse av motstand mot gjennomtrengning Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration Kommentarfrist: pren 458 Hørselsvern - Anbefalinger for valg, bruk, stell og vedlikehold - Retningslinjer Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document Kommentarfrist: Listenummer: 9/2013 Side: 18 av 113

19 13 Miljøvern. Helsevern. Sikkerhet pren rev Vernetøy mot faste, flytende og gassformige kjemikalier, innbefattet flytende og faste aerosoler - Del 1: Funksjonskrav for ventilert og ikke-ventilert gasstett (type 1) vernetøy Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) suits Kommentarfrist: pren Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) suits Kommentarfrist: pren Vernetøy mot radioaktiv forurensning - Del 1: Krav og prøvingsmetode for ventilert vernetøy mot partikulær radioaktiv forurensning Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination Kommentarfrist: pren Tanks for the transport of dangerous goods - Metallic tanks with a working pressure not exceeding 0,5 bar - Design and construction Kommentarfrist: pren Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings Kommentarfrist: pren Tanker for transport av farlig gods - Tankutstyr for transport av flytende kjemikalier og flytende gasser - Produktutflod og luftinnløpsventiler Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves Kommentarfrist: pren Tanker for transport av farlig gods - Tank utstyr for transport av flytende kjemikalier og flytende gasser - Fotventiler Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves Kommentarfrist: pren Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance of operable fabric curtains Kommentarfrist: pren Plast - Resirkulert plast - Karakterisering av returmateriale i polyvinylklorid (PVC) Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates Kommentarfrist: Listenummer: 9/2013 Side: 19 av 113

20 13 Miljøvern. Helsevern. Sikkerhet pren Plast - Resirkulert plast - Karakterisering av returmateriale i polyetylen tereftalat (PET) Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates Kommentarfrist: pren Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact Kommentarfrist: pren Vernetøy Beskyttelse mot flytende kjemikalier Krav til væsketetthet hos vernetøy som består av flere komponenter og som brukes av redningsstyrker (type 3 ET utstyr) Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquidtight connections between different parts of the clothing for emergency teams (Type 3 ET Equipment) Kommentarfrist: pren Bio-based products - Vocabulary Kommentarfrist: pren Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking Kommentarfrist: pren ISO Sikkerhetsutstyr for beskyttelse mot overtrykk - Del 6: Bruk, valg og installasjon av sprengskiver (ISO/DIS :2013) Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO/DIS :2013) Kommentarfrist: pren ISO 8030 Rubber and plastics hoses - Method of test for flammability (ISO/DIS 8030:2013) Kommentarfrist: pren ISO Cleanrooms and associated controlled environments - Part 12: Classification of air cleanliness by nanoscale particle concentration (ISO/DIS :2013) Kommentarfrist: pren ISO Jordkvalitet - Plantebasert biologisk prøving for å bestemme den miljømessige biologiske tilgjengeligheten av sporstoffer for planter (ISO/DIS 16198:2013) Soil quality - Plant-based biotest to assess the environmental bioavailability of trace elements to plants (ISO/DIS 16198:2013) Kommentarfrist: Listenummer: 9/2013 Side: 20 av 113

21 13 Miljøvern. Helsevern. Sikkerhet pren ISO Soil quality - Risk based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) (ISO/DIS :2013) Kommentarfrist: pren ISO Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) (ISO/DIS :2013) Kommentarfrist: pren ISO Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 1: Bestemmelse av vanninnhold (ISO/DIS :2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO/DIS :2013) Kommentarfrist: pren ISO Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 2: Bestemmelse av densitet av finkornet jord (ISO/DIS :2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil (ISO/DIS :2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices Kommentarfrist: ISO/DIS Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) Kommentarfrist: ISO/DIS Prøving av materialers egenskaper ved brannpåvirkning - Varmeavgivelse, røykproduksjon og hastighet av massetap - Del 1: Hastighet av varmeavgivelse (konkalorimeter metoden) Reaction to fire tests - Heat release, smoke production and mass loss rate - Part 1: Heat release rate (Cone calorimeter method) [Revision of first edition (ISO :1993)] Kommentarfrist: ISO/DIS Water quality -- Sampling -- Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling Kommentarfrist: ISO/DIS Water quality - Sampling - Part 14: Guidance on quality assurance of environmental water sampling and handling Kommentarfrist: Listenummer: 9/2013 Side: 21 av 113

22 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 8030 Rubber and plastics hoses - Method of test for flammability (Revision of first edition (ISO 8030:1987)) Kommentarfrist: ISO/DIS Soil quality -- Effects of pollutants on earthworms -- Part 3: Guidance on the determination of effects in field situations Kommentarfrist: ISO/DIS Soil quality - Effects of pollutants on earthworms (Eisenia fetida) - Part 3: Guidance on determination of effects in field situations Kommentarfrist: ISO/DIS Protective clothing for use in welding and allied processes Kommentarfrist: ISO/DIS Environmental management for concrete and concrete structures -- Part 2: System boundary and inventory data Kommentarfrist: ISO/DIS Stationary source emissions -- Green house gases -- Part 1: Calibration of automated measuring systems Kommentarfrist: ISO/DIS Stationary source emissions -- Green house gases -- Part 2: Ongoing quality control of automated measuring systems Kommentarfrist: ISO/DIS Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 3: Suspension peroxide oxidation combined acidity and sulfur (SPOCAS) suite analysis Kommentarfrist: ISO/DIS Cleanrooms and associated controlled environments -- Part 12: Classification of air cleanliness by nanoscale particle concentration Kommentarfrist: ISO/DIS Soil quality -- Plant-based biotest to assess the environmental bioavailability of trace elements to plants Kommentarfrist: ISO/DIS Soil quality -- Risk based petroleum hydrocarbons -- Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) Kommentarfrist: Listenummer: 9/2013 Side: 22 av 113

23 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Soil quality -- Risk-based petroleum hydrocarbons -- Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) Kommentarfrist: ISO/DIS GuideIines for interoperable object identification and related authentication systems to deter counterfeiting and illicit trade Kommentarfrist: ISO/DIS Water quality -- Bio-indicator of potential toxicity in aqueous media -- Determination of the potential toxicity of aqueous samples on bivalve embryo-larval development Kommentarfrist: ISO/DIS Water quality -- Determination of dissolved oxygen -- Optical sensor method Kommentarfrist: ISO/DIS Reaction to fire tests -- Test method for determination of mass loss rate Kommentarfrist: ISO/DIS Reaction to fire tests -- Mass loss measurement Kommentarfrist: ISO/DIS Soil quality -- Determination of elemental composition by X-ray fluorescence Kommentarfrist: ISO/DIS Sustainable development and resilience of communities -- Indicators for city services and quality of life Kommentarfrist: ISO-standarder ISO 10377:2013 Consumer product safety -- Guidelines for suppliers ISO 10393:2013 Consumer product recall -- Guidelines for suppliers ISO/TR 14069:2013 Greenhouse gases -- Quantification and reporting of greenhouse gas emissions for organizations -- Guidance for the application of ISO Listenummer: 9/2013 Side: 23 av 113

24 13 Miljøvern. Helsevern. Sikkerhet ISO/TR :2013 Determination of the resistance to jet fires of passive fire protection -- Part 2: Guidance on classification and implementation methods ISO/TS :2013 Respiratory protective devices -- Human factors -- Part 8: Ergonomic factors Rapporter fra CEN (CR) CEN ISO/TS :2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS :2012/Cor 1:2012) CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) CEN ISO/TR :2011/A1:2013 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR :2010/Amd 1:2013) CEN ISO/TS :2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS :2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS :2012) CEN/TR :2012 Skadereduserende vegtiltak - Del 6: Fotgjengerrekkverk / Road restraint systems - Part 6: Pedestrian restraint system, Pedestrian Parapet Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets CEN/TR 15120:2013 Tanker for transport av farlig gods - Retningslinjer og anbefalinger for lasting, transport og lossing Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading CEN/TR :2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16176:2011 Karakterisering av avfall Screeningsmetode for grunnstoffsammensetning ved bruk av røntgenfluorescensspektrometri for verifisering på stedet Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates Listenummer: 9/2013 Side: 24 av 113

25 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16193:2013 Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli CEN/TR 16220:2011 Byggevarer - Vurdering av frigjøring av farlige stoffer - Komplement til prøvetaking Construction products - Assessment of release of dangerous substances - Complement to sampling CEN/TR 16243:2011 Omgivelsesluft Veiledning for måling av elementært karbon (EC) og organisk karbon (OC) avsatt på filtre Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5 CEN/TR :2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 1: Felles referanse informasjon og rapportering Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 1: Common reference information and reporting CEN/TR :2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 2: Kjøretøymodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification CEN/TR :2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 3: Prøvingsmodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification CEN/TR :2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 4: Valideringsprosedyre Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures CEN/TR 16363:2012 Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries CEN/TR 16364:2012 Materialers påvirkning på drikkevann - Påvirkning ved migrering - Prediksjon av migrering fra organiske materialer ved bruk av matematisk modellering Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling CEN/TR 16365:2012 Karakterisering av avfall - Prøvetaking av avfall fra bergindustri Characterization of waste - Sampling of waste from extractive industries Listenummer: 9/2013 Side: 25 av 113

26 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16376:2012 Karakterisering av avfall - Generell veileder for karakterisering av avfall fra bergindustrien Characterization of waste - Overall guidance document for characterization of waste from the extractive industries CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16391:2012 Mekaniske vibrasjoner og støt - Håndoverførte vibrasjoner - Virkning av koplingskrefter ved hånd-maskin grenseflaten for evaluering av eksponering Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation CEN/TS 1187:2012 Prøvingsmetoder for utvendig branneksponering av tak Test methods for external fire exposure to roofs CEN/TS :2012 Skadereduserende vegtiltak - Del 8: Skadereduserende vegtiltak for motorsykler som reduserer alvorlighetsgraden ved motorsyklistenes kollisjon med vegrekkverk Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers CEN/TS 14972:2011 Faste brannslokkesystemer - Vanntåkesystemer - Dimensjonering og installering Fixed firefighting systems - Watermist systems - Design and installation CEN/TS :2012 Tre-og trebaserte produkters holdbarhet - Vurdering av utslipp fra behandlet tre til omgivelsene - Del 2: Trevarer eksponert i bruksklasse 4 og 5 (i kontakt med grunnen, ferskvann og sjøvann) - Laboratoriemetode Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method CEN/TS :2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment CEN/TS 15862:2012 Karakterisering av avfall - Samsvarsutlekkingsprøving - Ett-trinns utlekkingsprøving for monolitter ved fastsatt væske til overflateforhold (L/A) for prøve med fastsatt minimumsdimensjon Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions CEN/TS 15863:2012 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med periodisk fornyelse av utlekkingsvæske under fastsatte prøvingsbetingelser Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions Listenummer: 9/2013 Side: 26 av 113