Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 01/2010 Standardiseringsprosjekter og nye standarder Listenummer: 01/2010 Side: 1 av 120

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO :2005/prA1 Skap og disker for oppbevaring og utstilling av kjøle- og frysevarer - Del 1: Terminologi - Endringsblad 1 (ISO :2005/DAM 1:2009) Refrigerated display cabinets - Part 1: Vocabulary - Amendment 1 (ISO :2005/DAM 1:2009) Kommentarfrist: pren Transportable gassflasker - Kjennetegn (unntatt LPG) - Del 3: Fargekoding Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Kommentarfrist: pren Brann- og redningskjøretøyer - Del 1: Nomenklatur og betegnelse Fire fighting and rescue service vehicles - Part 1: Nomenclature and designation Kommentarfrist: pren European Ordering Rules - Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts Kommentarfrist: pren Klimaaggregater, væskekjøleaggregater og varmepumper med elektrisk drevne kompressorer for oppvarming og avkjøling av rom- Del 1:Termer og definisjoner Air conditioners, liquid chilling packages and heat pumps with electrically driven compressors for space heating and cooling - Part 1: Terms and definitions Kommentarfrist: pren Non destructive testing - Radiation method - Computed tomography - Part 1: Terminology Kommentarfrist: pren Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays Kommentarfrist: pren ISO Mykpapir og mykpapirprodukter - Del 1: Generell veiledning om termer (ISO/DIS :2009) Tissue paper and tissue products - Part 1: General principles for the use of terms (ISO/DIS :2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 7010:2003/DAmd 66 Safety sign E016: Emergency window with escape ladder Kommentarfrist: Listenummer: 01/2010 Side: 2 av 120

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2003/DAmd 67 Safety sign E017: Rescue window Kommentarfrist: ISO 7010:2003/DAmd 68 Safety sign E018: Turn anticlockwise to open Kommentarfrist: ISO 7010:2003/DAmd 69 Safety sign E019: Turn clockwise to open Kommentarfrist: ISO 7010:2003/DAmd 70 Safety sign M024: Use this walkway Kommentarfrist: ISO 7010:2003/DAmd 71 Safety sign P025: Do not use this incomplete scaffold Kommentarfrist: ISO 7010:2003/DAmd 72 Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir Kommentarfrist: ISO 7010:2003/DAmd 73 Safety sign P027: Do not use this lift for people Kommentarfrist: ISO 7010:2003/DAmd 74 Safety sign P028: Do not wear gloves Kommentarfrist: ISO 7010:2003/DAmd 75 Safety sign P029: No photography Kommentarfrist: ISO 7010:2003/DAmd 76 Safety sign W026: Warning; Battery charging Kommentarfrist: ISO 7010:2003/DAmd 77 Safety sign W029: Warning; Pressurized cylinder Kommentarfrist: ISO :2002/DAmd 1 Mekanisk vibrasjon - Vibrasjoner av roterende maskiner utstyrt med aktive magnetkulelagre - Del 1: Terminologi - Tillegg 1 Kommentarfrist: Listenummer: 01/2010 Side: 3 av 120

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Graphical symbols -- Safety colours and safety signs -- Part 4: Colorimetric and photometric properties of safety sign materials Kommentarfrist: ISO/DIS 7010 Graphical symbols -- Safety signs in workplaces and public areas Kommentarfrist: ISO/DIS 7010 Graphical symbols -- Safety colours and safety signs -- Registered safety signs Kommentarfrist: ISO/DIS Terminological entries in standards -- Part 1: General requirements and examples of presentation Kommentarfrist: ISO/DIS Tissue paper and tissue products -- Part 1: General principles for the use of terms Kommentarfrist: ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles Kommentarfrist: ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 2: Guidelines and functional requirements for records in electronic office environments Kommentarfrist: ISO/DIS Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems Kommentarfrist: ISO/DIS Packaging -- Linear bar code and two dimensional symbols for product packaging Kommentarfrist: ISO/DIS Linguistic resources management -- Multilingual information framework Kommentarfrist: ISO/DIS Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 1: Thesauri for information retrieval Kommentarfrist: Listenummer: 01/2010 Side: 4 av 120

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Information and documentation -- Digital object identifer system Kommentarfrist: ISO/DIS Ergonomics -- General approach, principles and concepts Kommentarfrist: ISO/DIS Information and documentation -- International standard name identifier (ISNI) Kommentarfrist: ISO/DIS Renseutstyr for luft og andre gasser -- terminologi Cleaning equipment for air and other gases -- Terminology Kommentarfrist: ISO/DIS Technical product documentation -- Document types Kommentarfrist: ISO-standarder ISO 5-1:2009 Photography and graphic technology -- Density measurements -- Part 1: Geometry and functional notation Erstatter A00008:20: ISO 369:2009 Machine tools -- Symbols for indications appearing on machine tools Erstatter A00008:20: ISO 639-6:2009 Codes for the representation of names of languages -- Part 6: Alpha-4 code for comprehensive coverage of language variants ISO 1942:2009 Dentistry -- Vocabulary Erstatter A00008:20:006647,A00008:20:006654,A00008:20:006659,A00008:20:006664,A00008:20: ISO 2076:2010 Textiles -- Man-made fibres -- Generic names Erstatter A00008:20: ISO 3040:2009 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones Erstatter A00008:20: Listenummer: 01/2010 Side: 5 av 120

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7135:2009 Earth-moving machinery -- Hydraulic excavators -- Terminology and commercial specifications Erstatter A00008:20: ISO :2009 Data quality -- Part 102: Master data: Exchange of characteristic data: Vocabulary ISO 12620:2009 Terminology and other language and content resources -- Specification of data categories and management of a Data Category Registry for language resources Erstatter A00008:20: ISO :2010 Medical devices -- Symbols to be used with medical device labels, labelling, and information to be supplied -- Part 2: Symbol development, selection and validation Erstatter A00008:20: ISO 16245:2009 Information and documentation -- Boxes, file covers and other enclosures, made from cellulosic materials, for storage of paper and parchment documents ISO 19719:2010 Machine tools -- Work holding chucks -- Vocabulary ISO :2009 Quantities and units -- Part 1: General Erstatter A00008:20:003621,A00008:20:005448,A00008:20:028985,A00008:20:028988,A00008:20: ISO :2009 Quantities and units -- Part 2: Mathematical signs and symbols to be used in the natural sciences and technology Erstatter A00008:20: ISO :2009 Quantities and units -- Part 10: Atomic and nuclear physics Erstatter A00008:20:003647,A00008:20:003650,A00008:20:028981,A00008:20: ISO/TR 23605:2009 Technical product specification (TPS) -- Application guidance -- International model for national implementation Rapporter fra CEN (CR) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) Listenummer: 01/2010 Side: 6 av 120

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN/TS 15810:2008 Grafiske symboler for bruk på utstyr i integrerte tekniske bygningsinstallasjoner ITB Graphical symbols for use on integrated building automation equipment Fastsatte norske standarder NS-EN ISO 445:2009 Paller for materialhåndtering - Ordliste (ISO 445:2008) Pallets for materials handling - Vocabulary (ISO 445:2008) Tilbaketrukne norske standarder NS-EN ISO 445:1998 Paller for materialhåndtering - Ordliste (ISO 445:1996) Pallets for materials handling - Vocabulary (ISO 445:1996) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Facility Management - Part 3: Guidance how to achieve/ensure quality in Facility Management Kommentarfrist: pren Taxonomy of Facility Management - Classification and Structures Kommentarfrist: pren Facility Management - Part 5: Guidance on the development and improvement of processes Kommentarfrist: pren Facility Management - Part 6: Area and Space Measurement Kommentarfrist: pren ISO Avanserte automasjonsteknologier og deres anvendelser - Del 1: Rammeverk for interoperabilitet mellom virksomheter Advanced automation technologies and their applications - Part 1: Framework for enterprise interoperability (ISO/DIS :2009) Kommentarfrist: pren ISO Electronic fee collection - Information exchange between service provision and toll charging (ISO/DIS 12855:2009) Kommentarfrist: Listenummer: 01/2010 Side: 7 av 120

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren ISO/IEC Conformity assessment - Requirements for bodies providing audit and certification of management systems and requirements for third-party certification auditing of management systems - Part 2: Requirements for third party certification auditing of management systems (ISO/IEC/DIS :2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Non-destructive testing -- Performance based qualification Kommentarfrist: ISO/DIS Electronic fee collection -- Information exchange between service provision and toll charging Kommentarfrist: ISO/DIS Intelligent transport systems -- Geographic Data Files (GDF) -- Overall data specification Kommentarfrist: ISO/DIS Geographic Data Files - GDF5.0 Kommentarfrist: ISO/DIS Guidance on social responsibility Kommentarfrist: ISO/DIS ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE Kommentarfrist: ISO-standarder ISO 22006:2009 Quality management systems -- Guidelines for the application of ISO 9001:2008 to crop production ISO 24153:2009 Random sampling and randomization procedures ISO Guide 34:2009 General requirements for the competence of reference material producers Erstatter A00008:20:033145,A00008:20: Listenummer: 01/2010 Side: 8 av 120

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Rapporter fra CEN (CR) CEN ISO/TS 12813:2009 Elektronisk avgiftsinnkreving (EFC) - Kontroll av samsvar for kommunikasjon i autonome EFC systemer Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009) CEN ISO/TS 17574:2009 Veitransporttelematikk - Elektronisk avgiftsinnkreving (EFC) - Retningslinjer for EFC sikkerhetsprofiler Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2009) CEN ISO/TS :2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 3: Kjøretøydata Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data (ISO/TS :2008) CEN ISO/TS :2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 4: Sikker kommunikasjon ved bruk av asymmetrisk teknikk Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO/TS :2008) CEN ISO/TS 25110:2008 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (OBU) med kortleser Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2008) CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR :2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR :2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points CEN/TS 15511:2008 Posttjenester - Tjenestekvalitet - Tilgjengelig informasjon om posttjenester Postal services - Quality of service - Information available on postal services CEN/TS 15722:2009 Veitransporttelematikk - ESikkerhet - Mangler Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) Listenummer: 01/2010 Side: 9 av 120

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 15873:2009 Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation CEN/TS 99001:2008 Business support - Support services provided to small enterprises - Terminology, quality and performance Fastsatte norske standarder NS-EN 15838:2009 Kundekontaktsenter - Krav til tjenestekvalitet Customer Contact Centres - Requirements for service provision NS-EN ISO 9004:2009 Styring for vedvarende fremgang i en organisasjon - Kvalitetsstyring som metode (ISO 9004:2009) Managing for the sustained success of an organization - A quality management approach (ISO 9004:2009) Tilbaketrukne norske standarder NS-EN ISO 9004:2000 Systemer for kvalitetsstyring - Retningslinjer for prestasjonsforbedringer (ISO 9004:2000) Quality management systems - Guidelines for performance improvements (ISO 9004:2000) Språk: no/en 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) EN ISO 16140:2003/prA1 Fôr- og næringsmiddelmikrobiologi - Veileder for validering av alternative metoder (ISO 16140:2003/DAM1:2009 Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods - Amendment 1: Interlaboratory study on quantitative methods (ISO 16140:2003/DAM1:2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 16140:2003/DAmd 1 Interlaboratory study on quantitative methods Kommentarfrist: Rapporter fra CEN (CR) CEN ISO/TS :2009 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS :2009) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) Listenummer: 01/2010 Side: 10 av 120

11 07 Matematikk. Naturvitenskap CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TS 15790:2008 Dyrefôr - PCR typing av probiotiske Saccharomyces cerevisiae (gjær) Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO :2006/prA1 Oftalmisk optikk - Kontaktlinser - Del 2: Toleranser - Amendment 1 (ISO :2006/DAM 1:2008) Ophthalmic optics - Contact lenses - Part 2: Tolerances - Amendment 1 (ISO :2006/DAM 1:2009) Kommentarfrist: EN ISO :2006/prA1 Oftalmisk optikk - Kontaktlinser - Del 2: Toleranser - Amendment 1 (ISO :2006/DAM 1:2009 Ophthalmic optics - Contact lenses - Part 2: Tolerances - Amendment 1 (ISO :2006/DAM 1:2009) Kommentarfrist: EN ISO 21671:2006/prA1 Tannpleie - Roterende poleringsinstrumenter - Endringsblad 1 (ISO 21671:2006/DAM 1:2009) Dentistry - Rotary polishers - Amendment 1 (ISO 21671:2006/DAM 1:2009) Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1) Kommentarfrist: pren Surgical drapes, gowns and clean air suits, used as medical devices for patients, clinical staff and equipment - General requirements for manufacturers, processors and products, test methods, performance requirements and performance levels Kommentarfrist: pren ISO 3107 Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO/DIS 3107:2009) Kommentarfrist: pren ISO Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO/DIS :2009) Kommentarfrist: pren ISO 8624 Øyeoptikk - Brilleinnfatninger - Oppmålingssystem og terminologi (ISO/DIS 8624:2009) Ophthalmic optics - Spectacle frames - Measuring system and terminology (ISO/DIS 8624:2009) Kommentarfrist: Listenummer: 01/2010 Side: 11 av 120

12 11 Helsevesen, Teknikk pren ISO Eye and face protection - Sunglasses and related eyewear - Part 1: Sunglasses for general use (ISO/DIS :2009) Kommentarfrist: pren ISO In vitro diagnostic medical devices - Stability testing of in vitro diagnostic reagents (ISO/DIS 23640:2009) Kommentarfrist: pren ISO Sharps injury protection - Requirements and test methods - Part 1: Sharps protection features for single-used hypodermic needles, catheters, introducers for catheters and needles used for blood sampling (ISO/DIS :2009) Kommentarfrist: pren ISO Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO/DIS :2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1.3 Kommentarfrist: ISO 21671:2006/DAmd 1 Kommentarfrist: ISO 24234:2004/DAmd 1 Requirements for marking and manufacturer's instructions concerning mercury Kommentarfrist: ISO/DIS 3107 Dentistry -- Zinc oxide/eugenol and zinc oxide/non-eugenol dental cements Kommentarfrist: ISO/DIS 3107 Dentistry -- Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements Kommentarfrist: ISO/DIS Optics and optical instruments -- Focimeters -- Part 1: General purpose instruments Kommentarfrist: ISO/DIS 8624 Ophthalmic optics -- Spectacle frames -- Measuring system and terminology Kommentarfrist: Listenummer: 01/2010 Side: 12 av 120

13 11 Helsevesen, Teknikk ISO/DIS Implants for surgery -- Retrieval and analysis of surgical implants -- Part 1: Retrieval and handling Kommentarfrist: ISO/DIS Urine-absorbing aids -- General guidance on evaluation Kommentarfrist: ISO/DIS In vitro diagnostic medical devices -- Stability testing of in vitro diagnostic reagents Kommentarfrist: ISO/DIS Sharps injury protection -- Requirements and test methods -- Part 1: Sharps protection features for single-used hypodermic needles, catheters, introducers for catheters and needles used for blood sampling Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors Kommentarfrist: ISO-standarder ISO 1942:2009 Dentistry -- Vocabulary Erstatter A00008:20:006647,A00008:20:006654,A00008:20:006659,A00008:20:006664,A00008:20: ISO :2007/Amd 1:2010 Requirements for terminal units for vacuum fitted on medical supply units with operator-adjustable portions and connected to the pipeline through flexible hoses ISO :2009 Injection containers and accessories -- Part 1: Injection vials made of glass tubing Erstatter A00008:20:034992,A00008:20: ISO 9801:2009 Ophthalmic instruments -- Trial case lenses Erstatter A00008:20: ISO :2010 Optics and photonics -- Operation microscopes -- Part 2: Light hazard from operation microscopes used in ocular surgery Erstatter A00008:20: Listenummer: 01/2010 Side: 13 av 120

14 11 Helsevesen, Teknikk ISO :2009 Biological evaluation of medical devices -- Part 9: Framework for identification and quantification of potential degradation products Erstatter A00008:20: ISO :2010 Medical devices -- Symbols to be used with medical device labels, labelling, and information to be supplied -- Part 2: Symbol development, selection and validation Erstatter A00008:20: ISO 15752:2010 Ophthalmic instruments -- Endoilluminators -- Fundamental requirements and test methods for optical radiation safety Erstatter A00008:20: ISO 15798:2010 Ophthalmic implants -- Ophthalmic viscosurgical devices Erstatter A00008:20:029084,A00008:20: ISO :2009 In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 1: Terms, definitions and general requirements ISO :2009 In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 2: In vitro diagnostic reagents for professional use ISO :2009 In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 3: In vitro diagnostic instruments for professional use ISO :2009 In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 4: In vitro diagnostic reagents for self-testing ISO :2009 In vitro diagnostic medical devices -- Information supplied by the manufacturer (labelling) -- Part 5: In vitro diagnostic instruments for self-testing ISO 21533:2003/Cor 1:2009 Språk: fr Rapporter fra CEN (CR) CEN ISO/TS :2008 Sterilisering av helsetjenesteprodukter Etylenoksid Del 2: Retningslinjer for anvendelse av ISO (ISO/DTS :2008) Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO (ISO/TS :2008) Listenummer: 01/2010 Side: 14 av 120

15 11 Helsevesen, Teknikk CEN ISO/TS :2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO (ISO/TS :2008/Cor 1:2009) CEN ISO/TS :2009 Sterilisering av helsetjenesteprodukter - Fuktig varme - Del 2: Veiledning for bruk av ISO (ISO/DTS :2008) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO (ISO/TS :2009) CEN/TR 12401:2009 Tannpleie - Veiledning for klassifisering av medisinsk utstyr brukt i tannpleien Dentistry - Guidance on the classification of dental devices and accessories CEN/TR 15753:2008 Emballasje - Pakningsvedlegg til medisiner - Braille og andre skriftformater for synshemmede Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people CEN/TR 15831:2009 Metode for kompresjonsprøving av strømper til medisinsk bruk Method for testing compression in medical hosiery CEN/TR 15913:2009 Kriterier for utforming av tilskueranlegg for tilskuere med nedsatt funksjonsevne Spectator facilities - Layout criteria for viewing area for spectators with special needs CEN/TS 15209:2008 Følbare overflateindikatorer på belegningsprodukter av betong, tegl og naturstein Tactile paving surface indicators produced from concrete, clay and stone Fastsatte norske standarder NS-EN 12183:2009 Manuelt drevne rullestoler - Krav og prøvingsmetoder Manual wheelchairs - Requirements and test methods NS-EN 12184:2009 Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods NS-EN 12342:1998+A1:2009 Svelgtuber til bruk med anestesimaskiner og ventilatorer Breathing tubes intended for use with anaesthetic apparatus and ventilators NS-EN :2002+A1:2009 Utstyr til respirasjonsbehandling - Del 2: Slanger og forbindelser Respiratory therapy equipment - Part 2: Tubing and connectors Listenummer: 01/2010 Side: 15 av 120

16 11 Helsevesen, Teknikk NS-EN :2001+A1:2009 Utstyr til respirasjonsbehandling - Del 3: Luftmedrivningsutstyr Respiratory therapy equipment - Part 3: Air entrainment devices NS-EN ISO :2009 Sterile hypodermiske injeksjonssprøyter til engangsbruk - Del 3: Selvblokkerende sprøyter for vaksinasjon med fastsatt dose (ISO :2005) Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO :2005) NS-EN ISO :2009 Sterile hypodermiske injeksjonssprøyter til engangsbruk - Del 4: Injeksjonssprøyter med egenskaper som hindrer gjenbruk (ISO :2006) Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO :2006) NS-EN ISO 14161:2009 Sterilisering av helsetjenesteprodukter - Biologiske indikatorer - Veiledning i valg, bruk og tolking av resultater (ISO 14161:2009) Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2009) NS-EN ISO 21649:2009 Nålefrie injektorer til medisinsk bruk - Krav og prøvingsmetoder (ISO 21649:2006) Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) Tilbaketrukne norske standarder NS-EN 12183:2006 Manuelt drevne rullestoler - Krav og prøvingsmetoder Manual wheelchairs - Requirements and test methods NS-EN 12184:2006 Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods NS-EN 12342:1998 Svelgtuber til bruk med anestesimaskiner og ventilatorer Breathing tubes intended for use with anaesthetic apparatus and ventilators NS-EN :2002 Utstyr til respirasjonsbehandling - Del 2: Slanger og forbindelser Respiratory therapy equipment - Part 2: Tubing and connectors NS-EN :2001 Utstyr til respirasjonsbehandling - Del 3: Luftmedrivningsutstyr Respiratory therapy equipment - Part 3: Air entrainment devices Listenummer: 01/2010 Side: 16 av 120

17 11 Helsevesen, Teknikk NS-EN ISO :2005 Sterile hypodermiske injeksjonssprøyter til engangsbruk - Del 3: Selvblokkerende sprøyter for vaksinasjon med fastsatt dose (ISO :2005) Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO :2005) NS-EN ISO :2006 Sterile hypodermiske injeksjonssprøyter til engangsbruk - Del 4: Injeksjonssprøyter med egenskaper som hindrer gjenbruk (ISO :2006) Sterile hypodermic syringes for single use - Part 4: Syringes with re-use prevention feature (ISO :2006) NS-EN ISO 14161:2000 Sterilisering av helsetjenesteprodukter - Biologiske indikatorer - Veiledning i valg, bruk og tolking av resultater (ISO 14161:2000) Sterilization of health care products - Biological indicators - Guidance for the selection, use and interpretation of results (ISO 14161:2000) NS-EN ISO 21649:2006 Nålefrie injektorer til medisinsk bruk - Krav og prøvingsmetoder (ISO 21649:2006) Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN 1300:2004/prA1 Verdioppbevaringsenheter - Klassifisering av låser konstruert for høy grad av sikkerhet i samsvar med deres motstandsdyktighet mot uautorisert åpning Secure storage units - Classification for high security locks according to their resistance to unauthorized opening Kommentarfrist: EN ISO 14021:2001/prA1 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) - Amendment 1 (ISO 14021:1999/DAM 1:2009) Kommentarfrist: pren Brannalarmanlegg - Del 29: Multisensor branndetektorer - Punktdetektorer som bruker en kombinasjon av røk- og varmesensorer Fire detection and fire alarm systems - Part 29: Multi-sensor fire detectors - Point detectors using a combination of smoke and heat sensors Kommentarfrist: pren 1839 Determination of explosion limits of gases and vapours Kommentarfrist: Listenummer: 01/2010 Side: 17 av 120

18 13 Miljøvern. Helsevern. Sikkerhet pren Brann- og redningskjøretøyer - Del 1: Nomenklatur og betegnelse Fire fighting and rescue service vehicles - Part 1: Nomenclature and designation Kommentarfrist: pren Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection products to steel members Kommentarfrist: pren Test methods for determining the contribution to the fire resistance of structural members - Part 4: Applied passive protection products to steel members Kommentarfrist: pren Tanker for transport av farlig gods - Serviceutstyr for tanker - Overfyllingsvern for flytende brennstoff Tanks for transport of dangerous goods - Service equipment for tanks - Overfill prevention systems for liquid fuels Kommentarfrist: pren Beskyttende ventilasjonssystemer for støveksplosjoner Dust explosion venting protective systems Kommentarfrist: pren Flameless explosion venting devices Kommentarfrist: pren Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates Kommentarfrist: pren Plastics - Recycled plastics - Sample preparation Kommentarfrist: pren Explosion diverters Kommentarfrist: pren Characterization of waste - Determination of calorific value Kommentarfrist: Listenummer: 01/2010 Side: 18 av 120

19 13 Miljøvern. Helsevern. Sikkerhet pren Vernetøy - Hansker for fotballmålvakter Protective clothing - Gloves with protective effect for association football goal keepers Kommentarfrist: pren Pedestrian doorsets, industrial, commercial, garage doors and windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteristics Kommentarfrist: pren ISO Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 1: Sikkerhetsventiler (ISO/DIS :2009) Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/DIS :2009) Kommentarfrist: pren ISO Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 4: Pilotopererte sikkerhetsventiler (ISO/DIS :2009) Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO/DIS :2009) Kommentarfrist: pren ISO Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 5: Styrte trykkavlastningssystemer (CSPRS) (ISO/DIS :2009) Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO/DIS :2009) Kommentarfrist: pren ISO Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 7: Felles data (ISO/DIS :2009) Safety devices for protection against excessive pressure - Part 7: Common data (ISO/DIS :2009) Kommentarfrist: pren ISO Ergonomics of human-system interaction - Part 420: Selection procedures for physical input devices (ISO/DIS :2009) Kommentarfrist: pren ISO Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS :2009) Kommentarfrist: pren ISO Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 1: Method with flow injection analysis (FIA) (ISO/DIS :2009) Kommentarfrist: pren ISO Water quality - Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) - Part 2: Method with continuous flow analysis (CFA) (ISO/DIS :2009) Kommentarfrist: Listenummer: 01/2010 Side: 19 av 120

20 13 Miljøvern. Helsevern. Sikkerhet pren ISO Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas (ISO/DIS :2009) Kommentarfrist: pren ISO Skog- og hagemaskiner - Vibrasjonsprøving for bærbare håndholdte maskiner med innvendig forbrenningsmotor - Vibrasjon ved håndtakene (ISO/DIS 22867:2009) Forestry and garden machinery - Vibration test code for portable hand-held machines with internal combustion engine - Vibration at the handles (ISO/DIS 22867:2009) Kommentarfrist: pren ISO Ergonomics - General approach, principles and concepts (ISO/DIS 26800:2009) Kommentarfrist: pren ISO Ergonomics of the physical environment - Assessment by means of an environmental survey involving physical measurement of the environment and subjective responses of people (ISO/DIS 28802:2009) Kommentarfrist: pren ISO Kraftdrevet håndverktøy - Måling av vibrasjoner på håndtak - Del 4: Slipemaskiner Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 4: Straight grinders (ISO/DIS :2009) Kommentarfrist: pren ISO Kraftdrevet håndverktøy - Måling av vibrasjoner på håndtak - Del 10: Slagboremaskiner, brytehammere og spadehammere Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 10: Percussive drills, hammers and breakers (ISO/DIS :2009) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1 Kommentarfrist: ISO 14021:1999/DAmd 1 Kommentarfrist: ISO/DIS Brannalarmanlegg - Del 6: Punkttype detektorer for deteksjon av karbonmonoksid Fire detection and alarm systems -- Part 6: Point-type fire detectors for detection of carbon monoxide Kommentarfrist: ISO/DIS Ergonomics of human-system interaction -- Part 420: Selection procedures for physical input devices Kommentarfrist: Listenummer: 01/2010 Side: 20 av 120

21 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles Kommentarfrist: ISO/DIS Air quality -- Test method for filtration characterisation of cleanable filter media Kommentarfrist: ISO/DIS Soil quality -- Determination of selected coal-tar derived phenolic compounds using high performance liquid chromatography (HPLC) Kommentarfrist: ISO/DIS Reaction to fire tests -- Measurement of fundamental material properties using a fire propagation apparatus Kommentarfrist: ISO/DIS Standard test method for measuring the ignition propensity of cigarettes Kommentarfrist: ISO/DIS Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams Kommentarfrist: ISO/DIS Water quality -- Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) -- Part 1: Method with flow injection analysis (FIA) Kommentarfrist: ISO/DIS Water quality -- Determination of total cyanide and free cyanide using flow analysis (FIA and CFA) -- Part 2: Method with continuous flow analysis (CFA) Kommentarfrist: ISO/DIS Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry Kommentarfrist: ISO/DIS Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet) Kommentarfrist: Listenummer: 01/2010 Side: 21 av 120

22 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Ships and marine technology -- Breathing apparatus for ships -- Part 4: Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes Kommentarfrist: ISO/DIS Ergonomics -- General approach, principles and concepts Kommentarfrist: ISO/DIS Protective clothing -- Performance requirements for protective clothing worn by operators applying pesticides Kommentarfrist: ISO-standarder ISO :2010 Fire protection -- Automatic sprinkler systems -- Part 12: Requirements and test methods for grooved-end components for steel pipe systems ISO :2009 Acoustics -- Audiometric test methods -- Part 2: Sound field audiometry with pure-tone and narrow-band test signals Erstatter A00008:20: ISO :2009 Indoor air -- Part 23: Performance test for evaluating the reduction of formaldehyde concentrations by sorptive building materials ISO :2009 Indoor air -- Part 24: Performance test for evaluating the reduction of volatile organic compound (except formaldehyde) concentrations by sorptive building materials ISO :2010 Remote handling devices for radioactive materials -- Part 1: General requirements Erstatter A00008:20: ISO :2009 Workplace atmospheres -- Determination of inorganic acids by ion chromatography -- Part 2: Volatile acids, except hydrofluoric acid (hydrochloric acid, hydrobromic acid and nitric acid) ISO 24095:2009 Workplace air -- Guidance for the measurement of respirable crystalline silica ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 1: Angle and vertical grinders Erstatter A00008:20: Listenummer: 01/2010 Side: 22 av 120

23 13 Miljøvern. Helsevern. Sikkerhet ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 2: Wrenches, nutrunners and screwdrivers Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 3: Polishers and rotary, orbital and random orbital sanders Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 5: Drills and impact drills Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 6: Rammers Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 7: Nibblers and shears Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action Erstatter A00008:20: ISO :2009 Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 9: Scaling hammers and needle scalers Erstatter A00008:20: ISO/TR :2010 Ergonomics of human-system interaction -- Part 100: Introduction to standards related to software ergonomics CEN Workshop Agreements CWA 16060:2009 Environmental technology verification - Air emission abatement technologies Rapporter fra CEN (CR) CEN ISO/TR 15462:2009 Vannundersøkelse - Valg av bionedbrytningsprøvinger Water quality - Selection of tests for biodegradability (ISO/TR 15462:2006) CEN ISO/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) Listenummer: 01/2010 Side: 23 av 120

24 13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS :2007) CEN ISO/TS :2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of ph on leaching with initial acid/base addition (ISO/TS :2007) CEN/TR :2009 Brannventilasjonssystemer - Del 4: Installerte røykventilasjonsanlegg Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation CEN/TR :2008 Små renseanlegg for inntil 50 PE - Del 5: Filtreringsanlegg for forbehandlet avløpsvann Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems CEN/TR 13688:2008 Denne skal ikke ha norsk tittel Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling CEN/TR :2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR :2009 Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles CEN/TR :2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 1: Krav og prøvingsmetoder for komponenter Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components CEN/TR :2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 2: Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance Listenummer: 01/2010 Side: 24 av 120

25 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 15642:2008 Ensartede prøvingsprosedyrer for prøvinger etter EN 3-7 Unified tests procedures for the tests of EN 3-7 CEN/TR 15809:2008 Characterization of sludges - Hygienic aspects - Treatments CEN/TR 15822:2009 Plast - Biologisk nedbrytbare plaster i eller på bakken - Gjennvinning, fjerning og relaterte miljøsaker Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues CEN/TS 14816:2008 Faste brannslokkesystemer - Vannspraysystemer - Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Water spray systems - Design, installation and maintenance CEN/TS 14972:2008 Faste brannslokkesystemer - Vanntåkesystemer - Dimensjonering og installering Fixed firefighting systems - Watermist systems - Design and installation CEN/TS :2008 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 1: Wood held in the storage yard after treatment and wooden commodities exposed in Use Class 3 (not covered, not in contact with the ground) - Laboratory method CEN/TS :2008 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method CEN/TS 15366:2009 Utstyr for drift og vedlikehold av veier om vinteren Absorpsjonsmidler for anvendelse på veier Winter and road service area maintenance equipment - Solid absorbents intended for road usage CEN/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) CEN/TS :2009 Jernbane - Brannsikring av jernbanevogner - Del 4: Krav til brannsikring for konstruksjonsmessig utforming av jernbanevogner Railway applications - Fire protection on railway vehicles - Part 4: Fire safety requirements for railway rolling stock design CEN/TS :2009 Jernbane - Brannsikring av jernbanevogner - Del 6: Tilleggstiltak for brannsikring Railway applications - Fire protection on railway vehicles - Part 6: Fire control and management systems Listenummer: 01/2010 Side: 25 av 120

26 13 Miljøvern. Helsevern. Sikkerhet Fastsatte norske standarder NS-EN 1837:1999+A1:2009 Maskinsikkerhet - Integrert belysning på maskiner Safety of machinery - Integral lighting of machines NS-EN :2004+NA:2010 Eurokode 2: Prosjektering av betongkonstruksjoner - Del 1-2: Brannteknisk dimensjonering Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design NS-EN :2004/NA:2010 Nasjonalt tillegg NA - Eurokode 2: Prosjektering av betongkonstruksjoner - Del 1-2: Brannteknisk dimensjonering National Annex NA - Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design Språk: no NS-EN :2005+NA:2009 Eurokode 4: Prosjektering av samvirkekonstruksjoner av stål og betong - Del 1-2: Brannteknisk dimensjonering Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design NS-EN 13061:2009 Vernetøy - Leggbeskyttere for fotballspillere - Krav og prøvingsmetoder Protective clothing - Shin guards for association football players - Requirements and test methods NS-EN :2007+A1:2009 Brannklassifisering av byggevarer og bygningsdeler - Del 1: Klassifisering ved bruk av resultater fra prøving av materialers egenskaper ved brannpåvirkning Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests NS-EN :2007+A1:2009 Brannklassifisering av byggevarer og bygningsdeler - Del 2: Klassifisering ved bruk av resultater fra brannmotstandsprøving, unntatt ventilasjonssystemer Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services NS-EN :2005+A1:2009 Brannklassifisering av byggevarer og bygningsdeler - Del 3: Klassifisering ved bruk av resultater fra brannmotstandsprøving av produkter og deler brukt i ventilasjonsanlegg: kanaler og spjeld med brannmotstand Fire classification of construction products and building elements - Part 3: Classification using data from fire resistance tests on products and elements used in building service installations: fire resisting ducts and fire dampers NS-EN :2007+A1:2009 Brannklassifisering av byggevarer og bygningsdeler - Del 4: Klassifisering ved bruk av data fra brannmotstandsprøving av komponenter i røykkontrollsystemer Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems NS-EN :2005+A1:2009 Brannklassifisering av byggevarer og bygningsdeler - Del 5: Klassifisering ved bruk av resultater fra prøving av tak utsatt for utvendig branneksponering Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests Listenummer: 01/2010 Side: 26 av 120

27 13 Miljøvern. Helsevern. Sikkerhet NS-EN 13890:2009 Arbeidsplassluft - Prosedyre for måling av metall og metalloider i luftbårne partikler - Krav og prøvingsmetoder Workplace exposure - Procedures for measuring metals and metalloids in airborne particles - Requirements and test methods NS-EN :2009 Utvidet anvendelse av resultater fra brannmotstandsprøvinger - Del 8: Bjelker Extended application of results from fire resistance tests - Part 8: Beams NS-EN :2009 Utvidet anvendelse av resultatene fra prøving av brannmotstanden og røyktettheten til dører, porter eller luker og åpningsbare vinduer med innebygde deler av bygningsbeslag - Del 20: Røykkontroll for hengslede dører og svingdører av glass med rammeverk av stål, tre og metall Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for hinged and pivoted steel, timber and metal framed glazed doorsets NS-EN ISO 14116:2008/AC:2009 Rettelsesblad AC 1 - Vernetøy - Beskyttelse mot varme og flamme - Materialer, materialkombinasjoner og bekledning med begrenset flammespredning (ISO 14116:2008/Cor 1:2009) Corrigendum AC 1 - Protective clothing - Protection against heat and flame - Limited flame spread materials, material assemblies and clothing (ISO 14116:2008/Cor 1:2009) Språk: fr Tilbaketrukne norske standarder NS-EN 1837:1999 Maskinsikkerhet - Integrert belysning på maskiner Safety of machinery - Integral lighting of machines Språk: no NS-EN :2004 Eurokode 2: Prosjektering av betongkonstruksjoner - Del 1-2: Brannteknisk dimensjonering Eurocode 2: Design of concrete structures - Part 1-2: General rules - Structural fire design NS-EN :2005 Eurokode 4: Prosjektering av samvirkekonstruksjoner av stål og betong - Del 1-2: Brannteknisk dimensjonering Eurocode 4: Design of composite steel and concrete structures - Part 1-2: General rules - Structural fire design NS-EN 13061:2001 Vernetøy - Leggbeskyttere for fotballspillere - Krav og prøvingsmetoder Protective clothing - Shin guards for association football players - Requirements and test methods NS-EN :2007 Brannklassifisering av byggevarer og bygningsdeler - Del 1: Klassifisering ved bruk av resultater fra prøving av materialers egenskaper ved brannpåvirkning Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests Listenummer: 01/2010 Side: 27 av 120