Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 7/2017 Standardiseringsprosjekter og nye standarder Listenummer: 7/2017 Side: 1 av 129

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 7010:2012/prA7 Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter - Endringsblad 7 (ISO 7010:2011/Amd 7:2016) Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016) Kommentarfrist: pren ISO 2553 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO/DIS 2553:2017) Kommentarfrist: pren ISO 7345 Bygningers og bygningskomponenters termiske egenskaper - Fysiske størrelser og definisjoner Thermal performance of buildings and building components - Physical quantities and definitions (ISO/DIS 7345:2017) Kommentarfrist: pren ISO Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 7010:2011/DAmd 188 Safety sign E021: Protection shelter Kommentarfrist: ISO 7010:2011/DAmd 189 Safety sign P044: Use of smart glasses prohibited Kommentarfrist: ISO 7010:2011/DAmd 190 Safety sign F007: Fire protection door Kommentarfrist: ISO 7010:2011/DAmd 191 Safety sign M050: Alighting from toboggan to the left Kommentarfrist: ISO 7010:2011/DAmd 192 Safety sign M051: Alighting from toboggan to the right Kommentarfrist: ISO 7010:2011/DAmd 193 Safety sign M052: Keep distance between toboggans Kommentarfrist: Listenummer: 7/2017 Side: 2 av 129

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2011/DAmd 195 Safety sign P046: Do not stretch out of toboggan Kommentarfrist: ISO 7010:2011/DAmd 196 Safety sign P047: Do not ram into toboggans Kommentarfrist: ISO 7010:2011/DAmd 197 Safety sign W042: Warning; Arc flash Kommentarfrist: ISO 7010:2011/DAmd 198 Safety sign P043: Not for people in the state of intoxication Kommentarfrist: ISO 9687:2015/DAmd 1 Kommentarfrist: ISO/DIS 1703 Assembly tools for screws and nuts - Nomenclature Kommentarfrist: ISO/DIS 2553 Welding and allied processes -- Symbolic representation on drawings -- Welded, brazed and soldered joints Kommentarfrist: ISO/DIS Reciprocating internal combustion engines - Vocabulary - Part 1: Terms for engine design and operation Kommentarfrist: ISO/DIS 5288 Synchronous belt drives - Vocabulary [Revision of first edition (ISO 5288:1982)] Synchronous belt drives - Vocabulary [Revision of first edition (ISO 5288:1982)] Kommentarfrist: ISO/DIS 5593 Rolling bearings -- Vocabulary Kommentarfrist: ISO/DIS 7345 Thermal performance of buildings and building components -- Physical quantities and definitions Kommentarfrist: Listenummer: 7/2017 Side: 3 av 129

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Optics and optical instruments - Preparation of drawings for optical elements and systems - Part 14: Wavefront deformation tolerance for systems containing zero-power elements only (Formerly ISO/NP 15000) Kommentarfrist: ISO/DIS Nuclear energy, nuclear technologies, and radiological protection -- Vocabulary -- Part 5: Nuclear reactors Kommentarfrist: ISO/DIS Ceramic tiles -- Definitions, classification, characteristics and marking Kommentarfrist: ISO/DIS Security and resilience -- Terminology Kommentarfrist: ISO/DIS Quantities and units -- Part 9: Physical chemistry and molecular physics Kommentarfrist: ISO/DIS Quantities and units -- Part 11: Characteristic numbers Kommentarfrist: ISO-standarder ISO :2017 Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols Erstatter A00008:20:030310,A00008:20: ISO :2017 Earth-moving machinery -- Symbols for operator controls and other displays -- Part 2: Symbols for specific machines, equipment and accessories Erstatter A00008:20:012744,A00008:20:024232,A00008:20: ISO 6531:2017 Machinery for forestry -- Portable chain-saws -- Vocabulary Erstatter A00008:20: ISO 14917:2017 Thermal spraying -- Terminology, classification Erstatter A00008:20: ISO 19465:2017 Traditional Chinese medicine -- Categories of traditional Chinese medicine (TCM) clinical terminological systems Listenummer: 7/2017 Side: 4 av 129

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO :2017 Vitreous and porcelain enamels -- Terminology -- Part 1: Terms and definitions ISO :2017 Vitreous and porcelain enamels -- Terminology -- Part 2: Visual representations and descriptions ISO :2017 Fireworks -- Categories 1, 2 and 3 -- Part 1: Terminology ISO :2017 Fireworks -- Category 4 -- Part 1: Terminology ISO/TR :2017 Photography -- Archiving systems -- Part 1: Best practices for digital image capture of cultural heritage material Rapporter fra CEN (CR) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16981:2016 Photocatalysis - Glossary of terms Fastsatte norske standarder NS-EN 378-1:2016 Kuldeanlegg og varmepumper - Sikkerhets- og miljøkrav - Del 1: Grunnleggende krav, definisjoner, klassifisering og vurderingskriterier Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria Listenummer: 7/2017 Side: 5 av 129

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN ISO 374-1:2016 Vernehansker mot farlige kjemikalier og mikroorganismer - Del 1: Terminologi og ytelseskrav for kjemiske risikoer (ISO 374-1:2016) Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO 374-1:2016) NS-EN ISO 374-5:2016 Vernehansker mot farlige kjemikalier og mikroorganismer - Del 5: Terminologi og ytelseskrav for risikoer for mikroorganismer (ISO 374-5:2016) Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organisms risks (ISO 374-5:2016) NS-EN ISO 7010:2012/A6:2016 Endringsblad A6 - Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter (ISO 7010:2011/Amd 6:2014) Amendment A6 - Graphical symbols - Safety colours and safety signs - Registered safety signs (ISO 7010:2011/Amd 6:2014) NS-EN ISO 9999:2016 Hjelpemidler for personer med nedsatt funksjonsevne - Klassifisering og terminologi (ISO 9999:2016) Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) NS-EN ISO :2016 Medisinsk utstyr - Symboler for medisinsk utstyr til bruk på etiketter, som merking og til informasjon - Del 1: Generelle krav (ISO :2016) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO :2016) Tilbaketrukne norske standarder NS-EN 374-1:2003 Vernehansker mot kjemikalier og mikroorganismer - Del 1: Terminologi og funksjonskrav Protective gloves against chemicals and micro-organisms - Part 1: Terminology and performance requirements NS-EN 378-1:2008+A2:2012 Kuldeanlegg og varmepumper - Sikkerhets- og miljøkrav - Del 1: Grunnleggende krav, definisjoner, klassifisering og vurderingskriterier Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria Språk: no NS-EN 378-1:2008+A2:2012 Kuldeanlegg og varmepumper - Sikkerhets- og miljøkrav - Del 1: Grunnleggende krav, definisjoner, klassifisering og vurderingskriterier Refrigerating systems and heat pumps - Safety and environmental requirements - Part 1: Basic requirements, definitions, classification and selection criteria NS-EN ISO 9999:2011 Hjelpemidler for personer med redusert funksjonsevne - Klassifisering og terminologi (ISO 9999:2011) Assistive products for persons with disability - Classification and terminology (ISO 9999:2011) Listenummer: 7/2017 Side: 6 av 129

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN ISO :2012 Medisinsk utstyr - Symboler for medisinsk utstyr til bruk på etiketter, som merking eller til informasjon - Del 1: Generelle krav (ISO :2012) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO :2012) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren ISO Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/DIS :2017) Kommentarfrist: pren ISO Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) Kommentarfrist: pren ISO Sustainable and traceable cocoa beans - Part 4: Requirements for certification schemes (ISO/DIS :2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Quality management - Guidelines to quality in project management (Formely CD ) Kommentarfrist: ISO/DIS Quality management systems -- Guidelines for quality management in projects Kommentarfrist: ISO/DIS Steels for the reinforcement of concrete -- Reinforcement couplers for mechanical splices of bars -- Part 3: Conformity assessment scheme Kommentarfrist: ISO/DIS Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes Kommentarfrist: ISO/DIS Quality management systems -- Specific requirements for the application of ISO 9001 and IAEA GS-R requirements by organizations in the supply chain of the nuclear energy sector Kommentarfrist: Listenummer: 7/2017 Side: 7 av 129

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Security and resilience -- Terminology Kommentarfrist: ISO/DIS Electronic fee collection -- Interface definition for on-board account using integrated circuit card (ICC) Kommentarfrist: ISO/DIS Risk management -- Principles and guidelines on implementation Kommentarfrist: ISO/DIS Risk management -- Guidelines Kommentarfrist: ISO-standarder ISO 11121:2017 Recreational diving services -- Requirements for introductory programmes to scuba diving Erstatter A00008:20: ISO :2017 Applications of statistical and related methods to new technology and product development process -- Part 2: Non-quantitative approaches for the acquisition of voice of customer and voice of stakeholder ISO :2017 Applications of statistical and related methods to new technology and product development process -- Part 4: Analysis of nonquantitative and quantitative Voice of Customer and Voice of Stakeholder ISO :2017 Applications of statistical and related methods to new technology and product development process -- Part 5: Solution strategy ISO :2017 Statistical methods in process management -- Capability and performance -- Part 2: Process capability and performance of timedependent process models Erstatter A00008:20: ISO 24803:2017 Recreational diving services -- Requirements for recreational diving providers Erstatter A00008:20: ISO 44001:2017 Collaborative business relationship management systems -- Requirements and framework Listenummer: 7/2017 Side: 8 av 129

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TR :2017 Applications of statistical and related methods to new technology and product development process -- Part 8: Guidelines for commercialization and life cycle ISO/TS 17574:2017 Electronic fee collection -- Guidelines for security protection profiles Erstatter A00008:20: ISO/TS 19091:2017 Intelligent transport systems -- Cooperative ITS -- Using V2I and I2V communications for applications related to signalized intersections ISO/TS :2017 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 24: Light encryption (TPEG2-LTE) Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TS 17425:2016 Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data (ISO/TS 17425:2016) CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background Listenummer: 7/2017 Side: 9 av 129

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16886:2016 Guidance on the application of statistical methods for determining the properties of masonry products CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing CEN/TS 16405:2017 Intelligent transport systems - Ecall - Additional data concept specification for heavy goods vehicles CEN/TS :2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment CEN/TS :2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE Listenummer: 7/2017 Side: 10 av 129

11 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS :2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN ISO :2016 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr mot EN ISO Del 1: Oppbygging av testsett og testanvendelse (ISO :2016) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO Part 1: Test suite structure and test purposes (ISO :2016) NS-EN ISO :2016 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr mot EN ISO Del 2: Generelt testsett (ISO :2016) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO Part 2: Abstract test suite (ISO :2016) NS-EN ISO :2016 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr mot EN ISO Del 1: Oppbygging av testsett og testanvendelse (ISO :2016) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO Part 1: Test suite structure and test purposes (ISO :2016) NS-EN ISO :2016 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr mot EN ISO Del 2: Generelt testsett (ISO :2016) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN ISO Part 2: Abstract test suite (ISO :2016) NS-EN ISO 13485:2016/AC:2016 Rettelsesblad AC - Medisinsk utstyr - Systemer for kvalitetsstyring - Krav for å oppfylle regelverk (ISO 13485:2016) Corrigendum AC - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) NS-EN ISO 17034:2016 Generelle kompetansekrav til produsenter av referansematerialer (ISO 17034:2016) General requirements for the competence of reference material producers (ISO 17034:2016) NS-EN ISO 22870:2016 Pasientnære undersøkelser (point-of-care-testing, POCT) - Krav til kvalitet og kompetanse (ISO 22870:2016) Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2016) NS-ISO/IEC 27004:2016 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Overvåking, måling, analyse og evaluering Information technology - Security techniques - Information security management - Monitoring, measurement, analysis and evaluation Listenummer: 7/2017 Side: 11 av 129

12 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Tilbaketrukne norske standarder NS-EN ISO 22870:2006 Pasientnære undersøkelser (point-of-care-testing, POCT) - Krav til kvalitet og kompetanse (ISO 22870:2006) Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2006) 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) EN ISO :1999/prA2 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium - Amendment 2: Inclusion of an alternative confirmation procedure (ISO :1999/DAmd 2:2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :1999/DAmd 2 Inclusion of an alternative confirmation procedure Kommentarfrist: ISO/DIS Microbiology of the food chain -- Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli -- Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-d-glucuronide Kommentarfrist: ISO/DIS Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of presumptive Escherichia coli - Part 1: Colony-count technique at 44 ºC using membranes and 5-bromo-4-chloro-3-indolyl-ß-D-glucoronic acid Kommentarfrist: ISO-standarder ISO 29621:2017 Cosmetics -- Microbiology -- Guidelines for the risk assessment and identification of microbiologically low-risk products Erstatter A00008:20: ISO/TS 19590:2017 Nanotechnologies -- Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry Rapporter fra CEN (CR) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) Listenummer: 7/2017 Side: 12 av 129

13 07 Matematikk. Naturvitenskap CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TR :2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies Listenummer: 7/2017 Side: 13 av 129

14 07 Matematikk. Naturvitenskap CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them 11 Helsevesen, Teknikk Standardforslag til høring - nasjonale prns 3360 Helsevesen - Unisex pasientslåbrok Health service - Unisex dressing gown for patients Språk: no Kommentarfrist: prns 3365 Helsevesen - Unisex pasienttruser i strikket metervare Health service - Unisex patient pants in knitted fabric Språk: no Kommentarfrist: Standardforslag til høring - europeiske (CEN) EN 12791:2016/prA1:2017 Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: EN ISO :2016/prA1 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO :2016/DAM 1:2017) Kommentarfrist: EN ISO 14889:2013/prA1 Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses - Amendment 1 (ISO 14889:2013/DAmd 1:2017) Kommentarfrist: EN ISO 15002:2008/prA1 Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/DAmd 1:2017) Kommentarfrist: EN ISO 16671:2015/prA1 Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment 1 (ISO 16671:2015/DAM 1:2017) Kommentarfrist: Listenummer: 7/2017 Side: 14 av 129

15 11 Helsevesen, Teknikk EN ISO :2016/prA1 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO :2016/DAmd 1:2017) Kommentarfrist: EN ISO :2016/prA2 Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 3: Forbindelsesstykker for enteral bruk - Endringsblad 2 (ISO :2016/DAmd 2:2017) Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 2 (ISO :2016/DAmd 2:2017) Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase2, step2 Kommentarfrist: pren ISO 7405 Dentistry - Evaluation of biocompatibility of medical devices used in dentistry (ISO/DIS 7405:2017) Kommentarfrist: pren ISO Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO/DIS :2017) Kommentarfrist: pren ISO Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO/DIS :2017) Kommentarfrist: pren ISO Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO/DIS :2017) Kommentarfrist: pren ISO Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO/DIS :2017) Kommentarfrist: pren ISO Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO/FDIS 11978:2017) Kommentarfrist: pren ISO Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations of intraocular lenses for the correction of aphakia (ISO/DIS :2017) Kommentarfrist: Listenummer: 7/2017 Side: 15 av 129

16 11 Helsevesen, Teknikk pren ISO Ophthalmic implants - Intraocular lenses - Part 10: Clinical investigations of intraocular lenses for correction of ametropia in phakic eyes (ISO/DIS :2017) Kommentarfrist: pren ISO Ophthalmic optics - Contact lenses and contact lens care products - Determination of physical compatibility of contact lens care products with contact lenses (ISO/DIS 11981:2017) Kommentarfrist: pren ISO Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO/DIS :2017) Kommentarfrist: pren ISO Dentistry - Orthodontic anchor screws (ISO/DIS 19023:2017) Kommentarfrist: pren ISO Sterile urethral catheters for single use (ISO/DIS 20696:2017) Kommentarfrist: pren ISO Sterile drainage catheters and accessory devices for single use (ISO/DIS 20697:2017) Kommentarfrist: pren ISO Sterilization of health care products - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices (ISO/DIS 25424:2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 9687:2015/DAmd 1 Kommentarfrist: ISO :2016/DAmd 1. Kommentarfrist: ISO :2016/DAmd 2. Kommentarfrist: ISO/DIS Wheelchairs -- Part 2: Determination of dynamic stability of electrically powered wheelchairs Kommentarfrist: Listenummer: 7/2017 Side: 16 av 129

17 11 Helsevesen, Teknikk ISO/DIS 7405 Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods Kommentarfrist: ISO/DIS 7405 Dentistry -- Evaluation of biocompatibility of medical devices used in dentistry Kommentarfrist: ISO/DIS 7492 Dental explorers Kommentarfrist: ISO/DIS Sterile hypodermic syringes for single use -- Part 3: Auto-disabled syringes for fixed-dose immunization Kommentarfrist: ISO/DIS Pressure regulators for use with medical gas systems -- Part 1: Pressure regulators and pressure regulators with flow-metering devices Kommentarfrist: ISO/DIS Pressure regulators for use with medical gases -- Part 2: Manifold and line pressure regulators Kommentarfrist: ISO/DIS Pressure regulators for use with medical gases -- Part 3: Pressure regulators integrated with cylinder valves Kommentarfrist: ISO/DIS Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process Kommentarfrist: ISO/DIS Biological evaluation of medical devices - Part 1: Evaluation and testing Kommentarfrist: ISO/DIS Ophthalmic implants -- Intraocular lenses -- Part 10: Phacic intraocular lenses Kommentarfrist: ISO/DIS Optics and optical instruments - Intraocular lenses - Part 7: Clinical investigations Kommentarfrist: Listenummer: 7/2017 Side: 17 av 129

18 11 Helsevesen, Teknikk ISO/DIS Optics and optical instruments - contact lenses and contact lens care products - Methods for the determination of the physical compatibility of contact lenses with contact lens care products Kommentarfrist: ISO/DIS Aseptic processing of health care products -- Part 2: Sterilizing filtration Kommentarfrist: ISO/DIS Aseptic processing of health care products - Part 2: Filtration Kommentarfrist: ISO/DIS Pen systems -- Part 2: Plunger stoppers for pen-injectors for medical use Kommentarfrist: ISO/DIS Pen systems - Part 2: Plungers and discs for pen-injectors for medical use Kommentarfrist: ISO/DIS Non-active surgical implants -- Implant coating -- Part 1: General requirements Kommentarfrist: ISO/DIS Connectors for reservoir delivery systems for healthcare applications -- Part 1: General requirements and common test methods Kommentarfrist: ISO/DIS Sterilization of health care products -- Biological and chemical indicators -- Test equipment Kommentarfrist: ISO/DIS Dentistry -- Orthodontic anchor screws Kommentarfrist: ISO/DIS Molecular in vitro diagnostic examinations -- Specifications for pre-examination processes for venous whole blood -- Part 1: Isolated cellular RNA Kommentarfrist: ISO/DIS Molecular in vitro diagnostic examinations -- Specifications for pre-examination processes for venous whole blood -- Part 2: Isolated genomic DNA correct Kommentarfrist: Listenummer: 7/2017 Side: 18 av 129

19 11 Helsevesen, Teknikk ISO/DIS Sterile urethal catheters for single use Kommentarfrist: ISO/DIS Sterile drainage catheters and accessory devices for single use Kommentarfrist: ISO/DIS Catheter systems for neuraxial application -- Sterile and single-use catheters and accessories Kommentarfrist: ISO/DIS Dentistry -- Reusable cartridge syringes intended for intraligamentary injections Kommentarfrist: ISO/DIS Sterilization of health care products -- Low temperature steam and formaldehyde -- Requirements for development, validation and routine control of a sterilization process for medical devices Kommentarfrist: ISO-standarder ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 2: Codes for decoction pieces ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 3: Codes for Chinese Materia Medica ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 4: Codes for granule forms of individual medicinals for prescriptions ISO 19465:2017 Traditional Chinese medicine -- Categories of traditional Chinese medicine (TCM) clinical terminological systems ISO :2017 Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses Erstatter A00008:20:035886,A00008:20: ISO/TR 13154:2017 Medical electrical equipment -- Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph Erstatter A00008:20: Listenummer: 7/2017 Side: 19 av 129

20 11 Helsevesen, Teknikk Rapporter fra CEN (CR) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16945:2016 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma Listenummer: 7/2017 Side: 20 av 129

21 11 Helsevesen, Teknikk Fastsatte norske standarder NS-EN 15224:2016 Ledelsessystemer for kvalitet - EN ISO 9001:2015 for helsetjenester Quality management systems - EN ISO 9001:2015 for healthcare NS-EN ISO 3964:2016 Tannpleie - Tilknytningsmål for håndstykker for dental bruk (ISO 3964:2016) Dentistry - Coupling dimensions for handpiece connectors (ISO 3964:2016) NS-EN ISO :2016 Kirurgiske implantater - Metalliske materialer - Del 3: Plastisk bearbeidet titanlegering med 6 % aluminium og 4 % vanadium (ISO :2016) Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO :2016) NS-EN ISO :2016 Elastomere deler for parenterale løsninger og for utstyr til farmasøytisk bruk - Del 5: Funksjonskrav og prøving (ISO :2016) Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO :2016) NS-EN ISO :2016 Tannpleie - Ekstraksjonsstenger - Del 1: Generelle krav (ISO :2016) Dentistry - Extraction forceps - Part 1: General requirements (ISO :2016) NS-EN ISO 9999:2016 Hjelpemidler for personer med nedsatt funksjonsevne - Klassifisering og terminologi (ISO 9999:2016) Assistive products for persons with disability - Classification and terminology (ISO 9999:2016) NS-EN ISO :2016 Biologisk evaluering av medisinsk utstyr - Del 6: Prøving for lokale virkninger etter implantering (ISO :2016) Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO :2016) NS-EN ISO 13485:2016/AC:2016 Rettelsesblad AC - Medisinsk utstyr - Systemer for kvalitetsstyring - Krav for å oppfylle regelverk (ISO 13485:2016) Corrigendum AC - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2016) NS-EN ISO 14801:2016 Tannpleie - Implantater - Dynamisk belastningsprøving for endostale implantater (ISO 14801:2016) Dentistry - Implants - Dynamic loading test for endosseous dental implants (ISO 14801:2016) NS-EN ISO :2016 Medisinsk utstyr - Symboler for medisinsk utstyr til bruk på etiketter, som merking og til informasjon - Del 1: Generelle krav (ISO :2016) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO :2016) Listenummer: 7/2017 Side: 21 av 129

22 11 Helsevesen, Teknikk NS-EN ISO 19054:2006/A1:2016 Endringsblad A1 - Skinnesystemer til opphenging av medisinsk utstyr (ISO 19054:2005/Amd 1:2016) Amendment A1 - Rail systems for supporting medical equipment (ISO 19054:2005/Amd 1:2016) NS-EN ISO 21535:2009/A1:2016 Endringsblad A1 - Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for hofteleddsimplantater (ISO 21535:2007/Amd 1:2016) Amendment A1 - Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants (ISO 21535:2007/Amd 1:2016) NS-EN ISO 22870:2016 Pasientnære undersøkelser (point-of-care-testing, POCT) - Krav til kvalitet og kompetanse (ISO 22870:2016) Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2016) Tilbaketrukne norske standarder NS-EN 15224:2012 Helsetjenester - Systemer for kvalitetsstyring - Krav basert på EN ISO 9001:2008 Health care services - Quality management systems - Requirements based on EN ISO 9001:2008 Språk: no NS-EN 15224:2012 Helsetjenester - Systemer for kvalitetsstyring - Krav basert på EN ISO 9001:2008 Health care services - Quality management systems - Requirements based on EN ISO 9001:2008 NS-EN ISO :2012 Kirurgiske implantater - Metalliske materialer - Del 3: Plastisk bearbeidet titanlegering med 6 % aluminium og 4 % vanadium (ISO :1996) Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO :1996) NS-EN ISO :2014 Elastomere deler for parenterale løsninger og for utstyr til farmasøytisk bruk - Del 5: Funksjonskrav og prøving (ISO :2005) Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 5: Functional requirements and testing (ISO :2005) NS-EN ISO :2006 Tannpleie - Ekstraksjonsstenger - Del 1: Generelle krav og prøvingsmetoder (ISO :2006) Dentistry - Extraction forceps - Part 1: General requirements and test methods (ISO :2006) NS-EN ISO 9999:2011 Hjelpemidler for personer med redusert funksjonsevne - Klassifisering og terminologi (ISO 9999:2011) Assistive products for persons with disability - Classification and terminology (ISO 9999:2011) Listenummer: 7/2017 Side: 22 av 129

23 11 Helsevesen, Teknikk NS-EN ISO :2009 Biologisk evaluering av medisinsk utstyr - Del 6: Prøving for lokaleffekter etter implantering (ISO :2007) Biological evaluation of medical devices - Part 6: Tests for local effects after implantation (ISO :2007) NS-EN ISO 14801:2007 Tannpleie - Implantater - Utmattelsesprøving for endostale implantater (ISO 14801:2007) Dentistry - Implants - Dynamic fatigue test for endosseous dental implants (ISO 14801:2007) NS-EN ISO :2012 Medisinsk utstyr - Symboler for medisinsk utstyr til bruk på etiketter, som merking eller til informasjon - Del 1: Generelle krav (ISO :2012) Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO :2012) NS-EN ISO 22870:2006 Pasientnære undersøkelser (point-of-care-testing, POCT) - Krav til kvalitet og kompetanse (ISO 22870:2006) Point-of-care testing (POCT) - Requirements for quality and competence (ISO 22870:2006) NS-ISO 3964:1982 Tannpleie - Håndstykker for dentalt bruk - Tilknytningsmål (= EN 23964) (ISO 3964:1982) Dentistry - Dental handpieces - Coupling dimensions (= EN 23964) (ISO 3964:1982) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - nasjonale prns 8176 Vibrasjoner og støt - Måling i bygninger av vibrasjoner fra landbasert samferdsel, vibrasjonsklasser og veiledning for bedømmelse av virkning på mennesker Vibration and shock - Measurement of vibration in buildings from landbased transport, vibration classification and guidance to evaluation of effects on human beings Språk: no Kommentarfrist: Standardforslag til høring - europeiske (CEN) EN 353-1:2014/prA1:2017 Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line Kommentarfrist: pren Secure storage units - Requirements, classification and methods of test for resistance to burglary - Part 1: Safes, ATM safes, strongroom doors and strongrooms Kommentarfrist: Listenummer: 7/2017 Side: 23 av 129

24 13 Miljøvern. Helsevern. Sikkerhet pren 1300 Secure storage units - Classification for high security locks according to their resistance to unauthorized opening Kommentarfrist: pren Protective clothing - Protective jackets, body and shoulder protectors for equestrian use, for horse riders and those working with horses, and for horse drivers - Requirements and test methods Kommentarfrist: pren Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 1: General requirements Kommentarfrist: pren Utstyr for vedlikehold om vinteren - Spredemaskiner (strømaskiner) - Del 1: Generelle krav og definisjoner for spredemaskiner Winter maintenance equipment - Spreading machines (gritting machines) - Part 1: General requirements and definitions for spreading machines Kommentarfrist: pren Utstyr for vedlikehold om vinteren - Spredemaskiner (strømaskiner) - Del 2: Krav til distribusjon og prøving Winter maintenance equipment - Spreading machines (gritting machines) - Part 2: Requirements for distribution and their test Kommentarfrist: pren Portable equipment for projecting extinguishing agents supplied by firefighting pumps - Portable foam generators - Part 4: High expansion foam generators PN16 Kommentarfrist: pren Vannundersøkelse Generelle krav og prosedyrer for ytelsesprøving av vannovervåkingsutstyr Måleinstrumenter Water quality - General requirements and performance test procedures for water monitoring equipment - Measuring devices Kommentarfrist: pren Determination of burning behaviour of dust layers Kommentarfrist: pren Railway applications - Fire protection in railway vehicles - Toxicity test of materials and components Kommentarfrist: pren Protective garments for motorcycle riders - Part 1: Test methods Kommentarfrist: Listenummer: 7/2017 Side: 24 av 129

25 13 Miljøvern. Helsevern. Sikkerhet pren Protective garments for motorcycle riders - Part 2: Heavy-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 3: Medium-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 4: Light-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 5: Light-duty abrasion protection garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 6: Impact protectors ensemble garments - Requirements Kommentarfrist: pren Domestic appliances used for drinking water treatment not connected to water supply - Jug water filter systems - Safety and performance requirements, labeling and information to be supplied Kommentarfrist: pren ISO Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (ISO/DIS :2017) Kommentarfrist: pren ISO Water quality - Determination of free chlorine and total chlorine - Part 2: Colorimetric method using N,N-diethyl-1,4- phenylenediamine, for routine control purposes Kommentarfrist: pren ISO 9698 Water quality - Tritium - Test method using liquid scintillation counting (ISO/DIS 9698:2017) Kommentarfrist: pren ISO Jordkvalitet - Bestemmelse av effektiv kationbyttekapasitet og basemetningsnivå ved bruk av bariumkloridløsning (ISO/DIS 11260:2017) Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO/DIS 11260:2017) Kommentarfrist: Listenummer: 7/2017 Side: 25 av 129

26 13 Miljøvern. Helsevern. Sikkerhet pren ISO Tekstiler - Metoder for husholdningsvask av tekstiler forut for prøving av flambarhet (ISO/DIS 12138:2017) Textiles - Domestic laundering procedures for textile fabrics prior to flammability testing (ISO/DIS 12138:2017) Kommentarfrist: pren ISO Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO/DIS 14254:2017) Kommentarfrist: pren ISO Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities (ISO 15382:2015) Kommentarfrist: pren ISO Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014) Kommentarfrist: pren ISO Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO :2015) Kommentarfrist: pren ISO Measurement of radioactivity in the environment - Soil - Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry (ISO :2015) Kommentarfrist: pren ISO Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating TORSO (ISO/DIS :2017) Kommentarfrist: pren ISO Protective clothing for firefighters - Physiological impact - Part 1: Measurement of coupled heat and moisture transfer with the sweating TORSO (ISO/DIS :2017) Kommentarfrist: pren ISO Protective clothing for fire-fighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO/DIS :2017) Kommentarfrist: pren ISO Protective clothing for fire-fighters - Physiological impact - Part 2: Determination of physiological heat load caused by protective clothing worn by firefighters (ISO/DIS :2017) Kommentarfrist: Listenummer: 7/2017 Side: 26 av 129

27 13 Miljøvern. Helsevern. Sikkerhet pren ISO Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014) Kommentarfrist: pren ISO Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO/DIS 19340:2017) Kommentarfrist: pren ISO Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO :2012) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO :2011) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO :2015) Kommentarfrist: pren ISO Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Akustikk - Referanseverdier til kalibrering av audiometre - Del 1: Ekvivalente referanselydtrykknivåer for rentoner og supra-aurale øretelefoner Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones Kommentarfrist: ISO/DIS Safety devices for protection against excessive pressure - Part 2: Bursting disc safety devices (Revision of ISO 4126:1981) Kommentarfrist: ISO/DIS Akustikk Hørselsvern Del 6: Bestemmelse av lyddemping av øreklokker med aktiv støyreduksjon Acoustics -- Hearing protectors -- Part 6: Determination of sound attenuation of active noise reduction earmuffs Kommentarfrist: Listenummer: 7/2017 Side: 27 av 129