Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 15/2017 Standardiseringsprosjekter og nye standarder Listenummer: 15/2017 Side: 1 av 142

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren Binders and factory made mixtures for floor screeds based on calcium sulphate - Part 1: Definitions and requirements Kommentarfrist: pren Tregulv - Terminologi Wood flooring and parquet - Terminology Kommentarfrist: pren Wood flooring and parquet - Terminology Kommentarfrist: pren ISO Tekniske tegninger - Forenklet tegning av rørledninger - Del 1: Generelle regler og rettvinklet fremstilling (ISO/FDIS :2017) Technical drawings - Simplified representation of pipelines - Part 1: General rules and orthogonal representation (ISO/FDIS :2017) Kommentarfrist: pren ISO Tekniske tegninger - Forenklet tegning av rørledninger - Del 2: Isometrisk projeksjon (ISO/FDIS :2017) Technical drawings - Simplified representation of pipelines - Part 2: Isometric projection (ISO/FDIS :2017) Kommentarfrist: pren ISO Teknisk tegning - Forenklet tegning av rørledninger - Del 3: Tilbehørsdeler for luftings- og dreneringssystemer (ISO/FDIS :2017) Technical drawings - Simplified representation of pipelines - Part 3: Terminal features of ventilation and drainage systems (ISO/FDIS :2017) Kommentarfrist: pren ISO Optikk og fotonikk - Lasere og laserrelatert utstyr - Terminologi og symboler (ISO/DIS 11145:2017) Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO/DIS 11145:2017) Kommentarfrist: pren ISO Quantities and units - Part 3: Space and time (ISO/DIS :2017) Kommentarfrist: pren ISO Quantities and units - Part 8: Acoustics (ISO/DIS :2017) Kommentarfrist: Listenummer: 15/2017 Side: 2 av 142

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - internasjonale (ISO) ISO/DIS 4720 Essential oils - Nomenclature [Revision of first edition (ISO 4720:1992)] Essential oils - Nomenclature [Revision of first edition (ISO 4720:1992)] Kommentarfrist: ISO/DIS Equipment for crop protection -- Sprayer nozzles -- Colour coding for identification Kommentarfrist: ISO/DIS Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols Kommentarfrist: ISO/DIS Health informatics -- Terminological resources -- Part 1: Characteristics Kommentarfrist: ISO/DIS Mechanical pencils and leads for general use -- Classification, dimensions, quality and test methods -- Part 1: Mechanical pencils Kommentarfrist: ISO/DIS Mechanical pencils and leads for general use -- Classification, dimensions, quality and test methods -- Part 2: Black leads Kommentarfrist: ISO/DIS Language resource management -- Corpus query lingua franca (CQLF) -- Part 1: Metamodel Kommentarfrist: ISO/DIS Quantities and units -- Part 1: General Kommentarfrist: ISO/DIS Quantities and units -- Part 3: Space and time Kommentarfrist: ISO/DIS Quantities and units -- Part 3: Space and time Kommentarfrist: ISO/DIS Størrelser og enheter - Del 8: Akustikk Quantities and units -- Part 8: Acoustics Kommentarfrist: Listenummer: 15/2017 Side: 3 av 142

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Quantities and units -- Part 8: Acoustics Kommentarfrist: ISO-standarder ISO :2017 Plain bearings -- Terms, definitions, classification and symbols -- Part 1: Design, bearing materials and their properties Erstatter A00008:20: ISO :2017 Plain bearings -- Terms, definitions, classification and symbols -- Part 2: Friction and wear Erstatter A00008:20: ISO :2017 Plain bearings -- Terms, definitions, classification and symbols -- Part 3: Lubrication Erstatter A00008:20: ISO 6472:2017 Rubber compounding ingredients -- Abbreviated terms Erstatter A00008:20: ISO 9849:2017 Optics and optical instruments -- Geodetic and surveying instruments -- Vocabulary Erstatter A00008:20: ISO :2017 Building construction machinery and equipment -- Plants for the preparation of concrete and mortar -- Part 1: Terminology and commercial specifications ISO/TR 19814:2017 Information and documentation -- Collections management for archives and libraries Rapporter fra CEN (CR) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2017 Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS :2015) CEN ISO/TS :2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS :2016) Listenummer: 15/2017 Side: 4 av 142

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 16981:2016 Photocatalysis - Glossary of terms Fastsatte norske standarder NS-EN 13967:2012+A1:2017 Tetningsmaterialer på rull - Bygningsmembraner av plast eller gummi - Definisjoner og kjennetegn Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics NS-EN ISO 7010:2012/A7:2017 Endringsblad A7 - Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilter - Registrerte sikkerhetsskilter (ISO 7010:2011/Amd 7:2016) Amendment A7 - Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 7 (ISO 7010:2011/Amd 7:2016) NS-EN ISO 20484:2017 Ikke-destruktiv prøving - Lekkasjeprøving - Terminologi (ISO 20484:2017) Non-destructive testing - Leak testing - Vocabulary (ISO 20484:2017) Tilbaketrukne norske standarder NS-EN :1998 Ikke-destruktiv prøving - Terminologi - Del 8: Termer benyttet ved lekkasjeprøving Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing NS-EN 13967:2012 Tetningsmaterialer på rull - Bygningsmembraner av plast eller gummi - Definisjoner og kjennetegn Flexible sheets for waterproofing - Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet - Definitions and characteristics 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - nasjonale prns Universell utforming - Tjenester - Tilgjengelighet til finanstjenester Universal design - Services - Accessibility to financial services Språk: no Kommentarfrist: Listenummer: 15/2017 Side: 5 av 142

6 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport prns Universell utforming - Tjenester - Likeverdig tilgang til tjenester innen detaljhandel Universal design - Services - Equal access to retail trade services Språk: no Kommentarfrist: Standardforslag til høring - europeiske (CEN) pren Maintenance - Maintenance Key Performance Indicators Kommentarfrist: pren ISO Guidelines for auditing management systems (ISO/DIS 19011:2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 9004 Quality management -- Quality of an organization -- Guidance to achieve sustained success Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for codes of conduct for organizations Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for complaints handling in organizations Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for dispute resolution external to organizations Kommentarfrist: ISO/DIS Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring Kommentarfrist: Listenummer: 15/2017 Side: 6 av 142

7 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Quality management -- Customer satisfaction -- Guidelines for monitoring and measuring Kommentarfrist: ISO/DIS Quality management systems -- Guidelines for quality plans Kommentarfrist: ISO/DIS Intelligent transport systems -- Vehicle interface for provisioning and support of ITS Services -- Part 3: Unified vehicle interface protocol (UVIP) server and client API specification Kommentarfrist: ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: ISO/DIS Intelligent transport systems -- Co-operative ITS -- Local dynamic map Kommentarfrist: ISO/DIS Guidelines for auditing management systems Kommentarfrist: ISO/DIS Guidelines for auditing management systems Kommentarfrist: ISO/DIS Earned value management in project and programme management Kommentarfrist: ISO/DIS Work breakdown structures for project and programme management Kommentarfrist: ISO/DIS Facility management -- Management systems -- Requirements with guidance for use Kommentarfrist: ISO-standarder ISO :2017 Tourism and related services -- Yacht harbours -- Part 1: Minimum requirements for basic service level harbours Erstatter A00008:20: Listenummer: 15/2017 Side: 7 av 142

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO :2017 Tourism and related services -- Yacht harbours -- Part 2: Minimum requirements for intermediate service level harbours Erstatter A00008:20: ISO :2017 Tourism and related services -- Yacht harbours -- Part 3: Minimum requirements for high service level harbours Erstatter A00008:20: ISO :2017 Customer contact centres -- Part 1: Requirements for customer contact centres ISO :2017 Customer contact centres -- Part 2: Requirements for clients using the services of customer contact centres ISO/TR 20526:2017 Account-based ticketing state of the art report ISO/TR 20545:2017 Intelligent transport systems -- Vehicle/roadway warning and control systems -- Report on standardisation for vehicle automated driving systems (RoVAS)/Beyond driver assistance systems ISO/TR 21941:2017 Financial services -- Third-party payment service providers ISO/TR 41013:2017 Facility management -- Scope, key concepts and benefits ISO/TS :2017 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 7: Location referencing container (TPEG2-LRC) ISO/TS :2017 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 22: OpenLR location referencing (TPEG2-OLR) CEN Workshop Agreements CWA :2017 Ethics assessment for research and innovation - Part 1: Ethics committee CWA :2017 Ethics assessment for research and innovation - Part 2: Ethical impact assessment framework Listenummer: 15/2017 Side: 8 av 142

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TS 17425:2016 Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data (ISO/TS 17425:2016) CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17429:2017 Intelligent transport systems - Cooperative ITS - ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017) CEN ISO/TS 17574:2017 Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2017) CEN ISO/TS 19091:2017 Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections (ISO/TS 19091:2017) CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16886:2016 Guidance on the application of statistical methods for determining the properties of masonry products CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items Listenummer: 15/2017 Side: 9 av 142

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing CEN/TS 16405:2017 Intelligent transport systems - Ecall - Additional data concept specification for heavy goods vehicles CEN/TS :2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE CEN/TS 17073:2017 Postal services - Interfaces for cross border parcels 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Biotechnology -- Biobanking -- General requirements for biobanking Kommentarfrist: ISO/DIS Biotechnology -- Cell counting -- Part 1: General guidance on cell counting methods Kommentarfrist: Listenummer: 15/2017 Side: 10 av 142

11 07 Matematikk. Naturvitenskap ISO-standarder ISO 16212:2017 Cosmetics -- Microbiology -- Enumeration of yeast and mould Erstatter A00008:20: ISO 17717:2017 Meteorological balloons -- Specification ISO :2017 Fine bubble technology -- General principles for usage and measurement of fine bubbles -- Part 1: Terminology ISO :2017 Microbiology of the food chain -- Horizontal method for the determination of Vibrio spp. -- Part 1: Detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus Erstatter A00008:20:038278,A00008:20: ISO :2017 Air quality -- Environmental meteorology -- Part 2: Ground-based remote sensing of wind by heterodyne pulsed Doppler lidar ISO/TR 19601:2017 Nanotechnologies -- Aerosol generation for air exposure studies of nano-objects and their aggregates and agglomerates (NOAA) ISO/TS 11888:2017 Nanotechnologies -- Characterization of multiwall carbon nanotubes -- Mesoscopic shape factors Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2017 Nanotechnologies - Vocabulary - Part 2: Nano-objects (ISO/TS :2015) CEN ISO/TS :2017 Nanotechnologies - Vocabulary - Part 12: Quantum phenomena in nanotechnology (ISO/TS :2016) Listenummer: 15/2017 Side: 11 av 142

12 07 Matematikk. Naturvitenskap CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them Fastsatte norske standarder NS-EN ISO :2017 Mikrobiologi i næringsmidler og fôr - Opparbeiding av analyseprøver, opprinnelig suspensjon og tierfortynninger for mikrobiologisk undersøkelse - Del 1: Generelle regler for opparbeiding av opprinnelig suspensjon og tierfortynninger (ISO :2017) Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO :2017) NS-EN ISO :2017 Mikrobiologi i næringsmidler og fôr - Opparbeiding av analyseprøver, opprinnelig suspensjon og tierfortynninger for mikrobiologisk undersøkelse - Del 2: Spesifikke regler for opparbeiding av kjøtt og kjøttprodukter (ISO :2017) Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO :2017) NS-EN ISO :2017 Mikrobiologi i næringsmidler og fôr - Opparbeiding av analyseprøver, opprinnelig suspensjon og tierfortynninger for mikrobiologisk undersøkelse - Del 3: Spesifikke regler for opparbeiding av fisk og fiskeprodukter (ISO :2017) Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery products (ISO :2017) Listenummer: 15/2017 Side: 12 av 142

13 07 Matematikk. Naturvitenskap NS-EN ISO :2017 Mikrobiologi i næringsmidler og fôr - Opparbeiding av analyseprøver, opprinnelig suspensjon og tierfortynninger for mikrobiologisk undersøkelse - Del 4: Spesifikke regler for diverse produkter (ISO :2017) Microbiology of the food chain - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of miscellaneous products (ISO :2017) NS-EN ISO 10273:2017 Mikrobiologi i næringsmidler og fôr - Horisontal metode for bestemmelse av patogen Yersinia enterocolitica (ISO 10273:2017) Microbiology of the food chain - Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO 10273:2017) NS-EN ISO 16654:2001/A1:2017 Endringsblad A1 - Fôr- og næringsmiddelmikrobiologi - Horisontal metode for bestemmelse av Escherichia coli Tillegg B: Resultat av interlaboratoriestudie (ISO 16654:2001/Amd 1:2017) Amendment A1 - Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Escherichia coli O157 - Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/Amd 1:2017) NS-EN ISO 22964:2017 Mikrobiologi i næringsmidler og fôr - Horisontal metode for bestemmelse av Cronobacter spp. (ISO 22964:2017) Microbiology of the food chain - Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017) Tilbaketrukne norske standarder NS-EN ISO :2003 Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 2: Spesielle retningslinjer for fortynning og tillaging av fortynningsrekke for kjøtt og kjøttprodukter (ISO :2003) Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 2: Specific rules for the preparation of meat and meat products (ISO :2003) NS-EN ISO :2003 Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 3: Spesielle retningslinjer for fortynning og tillaging av fortynningsrekke for fisk og fiskeprodukter (ISO :2003) Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 3: Specific rules for the preparation of fish and fishery products (ISO :2003) NS-EN ISO :2003 Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 4: Spesielle retningslinjer for fortynning og tillaging av fortynningsrekke for andre produkter enn melk og melkeprodukter, kjøtt og kjøttprodukter, fisk og fiskeprodukter (ISO :2003) - (innbefattet rettelsesblad AC:2004) Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products (ISO :2003) - (Corrigendum AC:2004 incorporated) NS-EN ISO :2003/A1:2011 Endringsblad A1 - Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 4: Spesielle retningslinjer for forbehandling av andre produkter enn melk og melkeprodukter, kjøtt og kjøttprodukter, fisk og fiskeprodukter (ISO :2003/Amd 1:2011) Amendment A1 - Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 4: Specific rules for the preparation of products other than milk and milk products, meat and meat products, and fish and fishery products (ISO :2003/Amd 1:2011) Listenummer: 15/2017 Side: 13 av 142

14 07 Matematikk. Naturvitenskap NS-EN ISO :1999 Fôr- og næringsmiddelmikrobiologi - Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse - Del 1: Generelle retningslinjer for fortynning og tillaging av fortynningsrekke (ISO :1999) Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO :1999) NS-EN ISO 10273:2003 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for bestemmelse av presumptivt patogene Yersinia enterocolitica (ISO 10273:2003) Microbiology of food and animal feedings stuffs - Horizontal method for the detection of presumptive pathogenic Yersinia enterocolitica (ISO 10273:2003) 11 Helsevesen, Teknikk Standardforslag til høring - nasjonale prns Universell utforming av byggverk - Del 1: Arbeids- og publikumsbygninger Universal design of building works - Part 1: Buildings open to the public Språk: no Kommentarfrist: Standardforslag til høring - europeiske (CEN) pren Packaging for terminally sterilized medical devices - Part 5: Sealable pouches and reels of porous materials and plastic film construction - Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 8: Re-usable sterilization containers for steam sterilizers conforming to EN Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 9: Uncoated nonwoven materials of polyolefines - Requirements and test methods Kommentarfrist: pren Packaging for terminally sterilized medical devices - Part 10: Adhesive coated nonwoven materials of polyolefines - Requirements and test methods Kommentarfrist: pren Surgical clothing and drapes - Requirements and test methods - Part 1: Surgical drapes and gowns Kommentarfrist: Listenummer: 15/2017 Side: 14 av 142

15 11 Helsevesen, Teknikk pren Surgical clothing and drapes - Requirements and test methods - Part 2: Clean air suits Kommentarfrist: pren Medical face masks - Requirements and test methods Kommentarfrist: pren Kjemiske desinfeksjonsmidler og antiseptika - Bruk av europeiske standarder for desinfeksjonsmidler og antiseptika Chemical disinfectants and antiseptics - Application of European Standards for chemical disinfectants and antiseptics Kommentarfrist: pren ISO Plastbeholdere for intravenøs injeksjon (ISO/DIS 15747:2017) Plastic containers for intravenous injections (ISO/DIS 15747:2017) Kommentarfrist: pren ISO Enteral feeding systems - Design and testing (ISO/DIS 20695:2017) Kommentarfrist: pren ISO Non-invasive sphygmomanometers - Part 2: Clinical investigation of intermittent automated measurement type (ISO/DIS :2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2003/DAmd 1 Kommentarfrist: ISO/DIS Wheelchairs -- Part 30: Wheelchairs for changing occupant posture -- test methods and requirements Kommentarfrist: ISO/DIS 7492 Dentistry -- Dental explorer Kommentarfrist: ISO/DIS Dentistry -- Stationary dental units and dental patient chairs -- Part 1: General requirements and test methods Kommentarfrist: ISO/DIS Dentistry -- Soft lining materials for removable dentures -- Part 1: Materials for short-term use Kommentarfrist: Listenummer: 15/2017 Side: 15 av 142

16 11 Helsevesen, Teknikk ISO/DIS Dentistry -- Polymer-based crown and veneering materials Kommentarfrist: ISO/DIS Dentistry -- Central suction source equipment Kommentarfrist: ISO/DIS Dentistry -- Powered polymerization activators Kommentarfrist: ISO/DIS Dentistry -- Dental amalgam reusable mixing-capsules Kommentarfrist: ISO/DIS Non-active surgical implants -- Mammary implants -- Particular requirements Kommentarfrist: ISO/DIS Plastics containers for intravenous injection Kommentarfrist: ISO/DIS Plastic containers for intravenous injections Kommentarfrist: ISO/DIS Connectors for reservoir delivery systems for healthcare applications -- Part 7: Conectors for Intravascular Infusion Kommentarfrist: ISO/DIS Enteral feeding systems - Design and testing Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-79: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory impairment Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-80: Particular requirements for basic safety and essential performance of ventilatory support equipment for ventilatory insufficiency Kommentarfrist: Listenummer: 15/2017 Side: 16 av 142

17 11 Helsevesen, Teknikk ISO/DIS Non-invasive sphygmomanometers -- Part 2: Clinical validation of automated measurement type Kommentarfrist: ISO/DIS Non-invasive sphygmomanometers -- Part 2: Clinical investigation of intermittent automated measurement type Kommentarfrist: ISO-standarder ISO :2017 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 1: Specifications for single-vision and multifocal lenses Erstatter A00008:20:034274,A00008:20: ISO :2017 Ophthalmic optics -- Uncut finished spectacle lenses -- Part 2: Specifications for power-variation lenses Erstatter A00008:20:034275,A00008:20: ISO :2017 Terminal units for medical gas pipeline systems -- Part 1: Terminal units for use with compressed medical gases and vacuum Erstatter A00008:20: ISO :2017 Optics and photonics -- Operation microscopes -- Part 1: Requirements and test methods Erstatter A00008:20: ISO 11491:2017 Implants for surgery -- Determination of impact resistance of ceramic femoral heads for hip joint prostheses ISO 13781:2017 Implants for surgery -- Homopolymers, copolymers and blends on poly(lactide) -- In vitro degradation testing Erstatter A00008:20:022467,A00008:20: ISO :2017 Implants for surgery -- Wear of total intervertebral spinal disc prostheses -- Part 3: Impingement-wear testing and corresponding environmental conditions for test of lumbar prostheses under adverse kinematic conditions ISO 19213:2017 Implants for surgery -- Test methods of material for use as a cortical bone model ISO 21987:2017 Ophthalmic optics -- Mounted spectacle lenses Erstatter A00008:20: ISO/TR :2017 Biological evaluation of medical devices -- Part 22: Guidance on nanomaterials Listenummer: 15/2017 Side: 17 av 142

18 11 Helsevesen, Teknikk ISO/TR 18845:2017 Dentistry -- Test methods for machining accuracy of computer-aided milling machines ISO/TR :2017 Medical device software -- Part 2: Validation of software for medical device quality systems ISO/TS 16506:2017 Dentistry -- Polymer-based luting materials containing adhesive components Rapporter fra CEN (CR) CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma Listenummer: 15/2017 Side: 18 av 142

19 11 Helsevesen, Teknikk CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16945:2016 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma Fastsatte norske standarder NS-EN :2017 Jernbane - Utforming for personer med funksjonsnedsettelser - Tilgjengelighet for personer med nedsatt bevegelighet på rullende materiell - Del 1: Trinn for av- og påstigning Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 1: Steps for access and egress NS-EN :2017 Jernbane - Utforming for personer med funksjonsnedsettelser - Tilgjengelighet for personer med nedsatt bevegelighet på rullende materiell - Del 2: På- og avstigningshjelp Railway applications - Design for PRM use - Accessibility of persons with reduced mobility to rolling stock - Part 2: Boarding aids NS-EN ISO 1797:2017 Tannpleie - Skaft for roterende og vibrerende instrumenter (ISO 1797:2017) Dentistry - Shanks for rotary and oscillating instruments (ISO 1797:2017) NS-EN ISO :2017 Tannpleie - Laboratoriefresere - Del 3: Hardmetallfresere for fresemaskiner (ISO :2017) Dentistry - Laboratory cutters - Part 3: Carbide cutters for milling machines (ISO :2017) NS-EN ISO 9873:2017 Tannpleie - Intraorale speil (ISO 9873:2017) Dentistry - Intra-oral mirrors (ISO 9873:2017) NS-EN ISO :2017 Biologisk evaluering av medisinsk utstyr - Del 4: Valg av prøvingsmetoder for utstyr som kommer i kontakt med blod (ISO :2017) Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO :2017) NS-EN ISO :2017 Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO :2017) Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO :2017) NS-EN ISO 19715:2017 Tannpleie - Fyllingsinstrument med kontravinkel (ISO 19715:2017) Dentistry - Filling instrument with contra angle (ISO 19715:2017) Listenummer: 15/2017 Side: 19 av 142

20 11 Helsevesen, Teknikk NS-EN ISO :2017 Forbindelsesstykker med liten diameter for væsker og gasser til medisinsk bruk - Del 7: Forbindelsesstykker for intravaskulær eller hypodermisk bruk (ISO :2016) Small-bore connectors for liquids and gases in healthcare applications - Part 7: Connectors for intravascular or hypodermic applications (ISO :2016) Tilbaketrukne norske standarder NS 604:1996 Helsevesen - Alminnelige bestemmelser for konfeksjonering i vevd bomullsstoff Health service - General requirements for manufacturing with cotton fabrics Språk: no NS 3311:1972 Helsevesen - Operasjonslaken med splitt Health Services - Slit operating theatre sheet Språk: no NS 3315:1981 Helsevesen - Bordtrekk for assistansebord for operasjonsstuer Health Service - Cover for assistance table for operating theatres Språk: no NS 3316:1972 Helsevesen - Stort dobbelt operasjonslaken med splitt Health Service - Large double slit operating theatre sheet Språk: no NS 3317:1972 Helsevesen - Stort operasjonsdekkestykke Health Service - Large operating cover Språk: no NS 3318:1973 Helsevesen - Lite operasjonslaken med splitt Health Service - Small slit operating table sheet Språk: no NS 3319:1974 Helsevesen - Alminnelige tilvirkningsbestemmelser for konfeksjon av polyester/bomull Hospital garments - General requirements for polyester/cotton fabric clothing Språk: no NS 3351:1981 Helsevesen - Shorts i polyester/bomull Health service - Polyester/cotton shorts Språk: no Listenummer: 15/2017 Side: 20 av 142

21 11 Helsevesen, Teknikk NS 3360:1985 Helsevesen - Pasientslåbroker i polyester/bomull Health service - Polyester/cotton dressing gowns for patients Språk: no NS 3372:1998 Helsevesen - Operasjonsfrakker Health service - Operating theatre gowns Språk: no NS 4300:1973 Helsevesen - Operasjonspakkestykker Health service - Overwraps for sterile packages Språk: no NS 4304:1975 Helsevesen - T-bind Health service - T-bandages Språk: no NS 4305:1975 Helsevesen - Laparotomibind Health service - Laparotomi bandages Språk: no NS 4306:1976 Helsevesen - Grunnpakke for sterilt operasjonstøy Health service - Base set for sterile surgical textiles Språk: no NS 4307:1976 Helsevesen - Grunnpakke for sterile operasjonsfrakker Health service - Base set for sterile surgical coats Språk: no NS 4325:1977 Helsevesen - Ermebeskytter for operasjonsfrakk Health service - Operating theatre over-sleeve Språk: no NS 4350:1996 Helsevesen - Alminnelige tilvirkningsbestemmelser for konfeksjon i bomullstrikot Health service - General requirements for manufacturing of cotton knitwear ready-made clothing Språk: no NS 4351:1985 Helsevesen - Undertrøyer i bomullstrikot Health service - Cotton knitwear undershirts Språk: no Listenummer: 15/2017 Side: 21 av 142

22 11 Helsevesen, Teknikk NS 4354:1996 Helsevesen - Herretruser i bomullstrikot Health service - Cotton knitwear briefs for men Språk: no NS 4356:1996 Helsevesen - Dame- og barnetruser i bomullstrikot Health service - Cotton knitwear briefs for ladies and children Språk: no NS 4357:1996 Helsevesen - Dameunderbenklær i bomullstrikot Health service - Cotton knitwear knickers for ladies Språk: no NS 4360:1974 Helsevesen - Spedbarnstrøyer uten ermer i bomullstrikot Health service - Sleeveless cotton tricot vests for babies Språk: no NS 4361:1974 Helsevesen - Sparkebukse i bomullstrikot Health service - Cotton tricot pull ups Språk: no NS 4363:1996 Helsevesen - Herreunderbenklær med korte ben i bomullstrikot Health service - Cotton knitwear short underpants for men Språk: no NS-EN 1707:1996 Koniske koblingsstykker med 6% (luer) spiss for sprøyter, nåler og en del annet medisinsk utstyr - Koblingsstykker med lås Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings NS-EN :1990/AC1:1990 Dentistry - Dental rotary instruments - Cutters - Part 1: Steel laboratory cutters NS-EN ISO :2011 Tannpleie - Skaft for roterende instrumenter - Del 1: Skaft laget av metall (ISO :2011) Dentistry - Shanks for rotary instruments - Part 1: Shanks made of metals (ISO :2011) NS-EN ISO :2013 Tannpleie - Skaft for roterende instrumenter - Del 3: Skaft laget av keramikk (ISO :2013) Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO :2013) Listenummer: 15/2017 Side: 22 av 142

23 11 Helsevesen, Teknikk NS-EN ISO :1995 Tannpleie - Roterende instrumenter - Skaft - Del 2: Skaft laget av plast (ISO :1992) Dental rotary equipment - Shanks- Part 2: Shanks made of plastics (ISO :1992) NS-EN ISO 9873:2000 Tannpleie - Håndinstrumenter - Speil og håndtak til flergangsbruk (ISO 9873:1998) Dental hand instruments - Reusable mirrors and handles (ISO 9873:1998) NS-EN ISO :2009 Biologisk evaluering av medisinsk utstyr - Del 4: Valg av prøvingsmetoder for utstyr som kommer i kontakt med blod (ISO :2002, innbefattet Amd 1:2006) Biological evaluation of medical devices - Part 4: Selection of tests for interactions with blood (ISO :2002, including Amd 1:2006) NS-EN ISO :2015 Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO : Amd 1:2011) Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO : Amd 1:2011) NS-ISO 594-1:1993/A1 Endringsblad til NS-ISO 594-1: Koniske forbindelser med 6 % (Luer) stigning for sprøyter, kanyler og annet medisinsk utstyr - Del 1: Generelle krav (ISO 594-1:1986) Amendment to NS-ISO 594-1: Conical fittings with a 6 % (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (ISO 594-1:1986) NS-ISO 594-1:1986 Koniske forbindelser med 6% (Luer) stigning for sprøyter, kanyler og annet medisinsk utstyr - Del 1: Generelle krav (= EN :1993) (ISO 594-1:1986) Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Part 1: General requirements (= EN :1993) (ISO 594-1:1986) NS-ISO :1991 Tannpleie - Roterende instrumenter - Freser - Del 3: Laboratoriefreser av hardmetall for fresemaskiner - (= EN :1993) (ISO :1991) Dental rotary instruments - Cutters - Part 3: Carbide laboratory cutters for milling machines - (= EN :1993) (ISO :1991) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN 13374:2013/prA1 Temporary edge protection systems - Product specification - Test methods Kommentarfrist: Listenummer: 15/2017 Side: 23 av 142

24 13 Miljøvern. Helsevern. Sikkerhet EN 14116:2012+A1:2014/prA2 Tanks for transport of dangerous goods - Digital interface for product recognition devices for liquid fuels Kommentarfrist: EN :2015/prA1 Determination of material resistance to permeation by chemicals - Part 1: Permeation by potentially hazardous liquid chemicals under conditions of continuous contact Kommentarfrist: EN :2015/prA1 Determination of material resistance to permeation by chemicals - Part 2: Permeation by potentially hazardous gaseous chemicals under conditions of continuous contact Kommentarfrist: EN 16657:2016/prA1 Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks Kommentarfrist: pren 143 Åndedrettsvern - Partikkelfiltre - Krav, prøving, merking Respiratory protective devices - Particle filters - Requirements, testing, marking Kommentarfrist: pren Respiratory protective devices - Threads for facepieces - Part 1: Standard thread connection Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 4: Level-dependent ear-muffs Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 5: Active noise reduction ear-muffs Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 6: Ear-muffs with electrical audio input Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 7: Level-dependent ear-plugs Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 8: Entertainment audio ear-muffs Kommentarfrist: Listenummer: 15/2017 Side: 24 av 142

25 13 Miljøvern. Helsevern. Sikkerhet pren Hearing protectors - Safety requirements and testing - Part 9: Earplugs with electrical audio input Kommentarfrist: pren Hearing protectors - Safety requirements and testing - Part 10: Earplugs with entertainment audio input Kommentarfrist: pren 360 Personlig verneutstyr mot fall fra høyder - Selvstrammende fanganordninger Personal fall protection equipment - Retractable type fall arresters Kommentarfrist: pren 360 Personal fall protection equipment - Retractable type fall arresters Kommentarfrist: pren High efficiency air filters (EPA, HEPA and ULPA) - Part 1: Classification, performance testing, marking Kommentarfrist: pren Fire classification of construction products and building elements - Part 1: Classification using data from reaction to fire tests Kommentarfrist: pren Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables Kommentarfrist: pren Footwear protecting against chemicals - Part 1: Terminology and test methods Kommentarfrist: pren Footwear protecting against chemicals - Part 2: Requirements for limited contact with chemicals Kommentarfrist: pren Footwear protecting against chemicals - Part 3: Requirements for prolonged contact with chemicals Kommentarfrist: pren Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking Kommentarfrist: Listenummer: 15/2017 Side: 25 av 142

26 13 Miljøvern. Helsevern. Sikkerhet pren Characterization of sludges - Filtration properties - Part 4: Determination of the drainability of flocculated sludges Kommentarfrist: pren Fixed firefighting systems - Water mist systems - Part 1: Design, installation, inspection and maintenance Kommentarfrist: pren Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 20: Smoke control for doors, shutters and openable windows Kommentarfrist: pren Ventilation for buildings - Fire resisting duct sections Kommentarfrist: pren Faste brannslokkesystemer - Automatiske boligsprinklersystemer - Dimensjonering, installering og vedlikehold Fixed firefighting systems - Automatic residential sprinkler systems - Design, installation and maintenance Kommentarfrist: pren Fixed firefighting systems - Automatic residential sprinkler systems - Design, installation and maintenance Kommentarfrist: pren Water quality - Guidance on determining the degree of modification of the hydromorphological features of transitional and coastal waters Kommentarfrist: pren Water quality - Guidance on field and laboratory procedures for quantitative analysis and identification of macro-invertebrates from inland surface waters Kommentarfrist: pren Cleanrooms and associated controlled environments -- Biocontamination control Kommentarfrist: pren ISO 1716 Reaction to fire tests for products - Determination of the gross heat of combustion (calorific value) (ISO/DIS 1716:2017) Kommentarfrist: pren ISO Ergonomics of human-system interaction - Part 306: Field assessment methods for electronic visual displays (ISO/DIS :2017) Kommentarfrist: Listenummer: 15/2017 Side: 26 av 142

27 13 Miljøvern. Helsevern. Sikkerhet pren ISO Water quality - Guidance for the preparation and treatment of poorly water-soluble organic compounds for the subsequent evaluation of their biodegradability in an aqueous medium (ISO/DIS 10634: 2017) Kommentarfrist: pren ISO Water quality - Gross alpha and gross beta activity - Test method using liquid scintillation counting (ISO/DIS 11704) Kommentarfrist: pren ISO Safety of machinery - Minimum gaps to avoid crushing of parts of the human body (ISO/FDIS 13854:2017) Kommentarfrist: pren ISO Klimagasser - Del 1: Spesifikasjon med veiledning på organisasjonsnivå for kvantifisering og rapportering av utslipp og fjerning av klimagasser (ISO/DIS :2017) Greenhouse gases - Part 1: Specification with guidance at the organization level for quantification and reporting of greenhouse gas emissions and removals (ISO/DIS :2017) Kommentarfrist: pren ISO Klimagasser - Del 2: Spesifikasjon med veiledning på prosjektnivå for kvantifisering, overvåking og rapportering av utslippsreduksjon eller forbedret fjerning av klimagasser (ISO/DIS :2017) Greenhouse gases - Part 2: Specification with guidance at the project level for quantification, monitoring and reporting of greenhouse gas emission reductions or removal enhancements (ISO/DIS :2017) Kommentarfrist: pren ISO Water quality - Determination of orthophosphate and total phosphorus contents by flow analysis (FIA and CFA) - Part 2: Method by continuous flow analysis (CFA) (ISO/DIS :2017) Kommentarfrist: pren ISO Protective gloves for pesticide operators - Performance requirements (ISO/DIS 18889:2017) Kommentarfrist: pren ISO Petroleum, petrochemical and natural gas industries - Safety of machineries - Powered elevators (ISO/DIS 20321:2017) Kommentarfrist: pren ISO Foot and leg protectors - Requirements and test methods for footwear components assessment - Metallic toecaps (ISO/DIS :2017) Kommentarfrist: pren ISO Foot and leg protectors - Requirements and test methods for footwear component assessment - Part 2: Non-metallic toecaps (ISO/DIS :2017) Kommentarfrist: Listenummer: 15/2017 Side: 27 av 142

28 13 Miljøvern. Helsevern. Sikkerhet pren ISO Foot and leg protectors - Requirements and test methods for footwear components assessment - Part 3: Metallic anti-perforation insert (ISO/DIS :2017) Kommentarfrist: pren ISO Foot and leg protectors - Requirements and test methods for footwear components assessment - Part 4: Non-metallic perforation resistant insert (ISO/DIS :2017) Kommentarfrist: pren ISO The human-centred organization - Guidance for managers (ISO/DIS 27501:2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 1716 Reaction to fire tests for building and transport products -- Determination of the heat of combustion Kommentarfrist: ISO/DIS 1716 Reaction to fire tests for products -- Determination of the gross heat of combustion (calorific value) Kommentarfrist: ISO/DIS Mekanisk vibrasjon - Bedømmelse av hvordan helkroppsvibrasjoner virker inn på mennesker - Del 5: Metode for vurdering av vibrasjoner som inneholder gjentatte støt Mechanical vibration and shock -- Evaluation of human exposure to whole-body vibration -- Part 5: Method for evaluation of vibration containing multiple shocks Kommentarfrist: ISO/DIS Fire protection -- Automatic sprinkler system -- Part 8: Requirements and test methods for pre-action dry alarm valves Kommentarfrist: ISO/DIS Reciprocating internal combustion engines - Exhaust emission measurement - Part 6: Test report Kommentarfrist: ISO/DIS Ergonomics of human-system interaction -- Part 306: Field assessment methods for electronic visual displays Kommentarfrist: ISO/DIS Ergonomics of human-system interaction -- Part 306: Field assessment methods for electronic visual displays Kommentarfrist: Listenummer: 15/2017 Side: 28 av 142