Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 9/2017 Standardiseringsprosjekter og nye standarder Listenummer: 9/2017 Side: 1 av 142

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 9687:2015/prA1 Dentistry - Graphical symbols for dental equipment - Amendment 1 (ISO 9687:2015/DAmd 1:2017) Kommentarfrist: pren ISO 2553 Welding and allied processes - Symbolic representation on drawings - Welded joints (ISO/DIS 2553:2017) Kommentarfrist: pren ISO 7345 Bygningers og bygningskomponenters termiske egenskaper - Fysiske størrelser og definisjoner Thermal performance of buildings and building components - Physical quantities and definitions (ISO/DIS 7345:2017) Kommentarfrist: pren ISO Motstandssveising - Terminologi - Del 1: Punkt-, knast- og sømsveising (ISO/DIS :2017) Resistance welding - Vocabulary - Part 1: Spot, projection and seam welding (ISO/DIS :2017) Kommentarfrist: pren ISO Pigments, dyestuffs and extenders - Terminology - Part 1: General terms (ISO :2015) Kommentarfrist: pren ISO Quantities and units - Part 1: General (ISO/DIS :2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 7010:2011/DAmd 188 Safety sign E021: Protection shelter Kommentarfrist: ISO 7010:2011/DAmd 189 Safety sign P044: Use of smart glasses prohibited Kommentarfrist: ISO 7010:2011/DAmd 190 Safety sign F007: Fire protection door Kommentarfrist: ISO 7010:2011/DAmd 191 Safety sign M050: Alighting from toboggan to the left Kommentarfrist: Listenummer: 9/2017 Side: 2 av 142

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2011/DAmd 192 Safety sign M051: Alighting from toboggan to the right Kommentarfrist: ISO 7010:2011/DAmd 193 Safety sign M052: Keep distance between toboggans Kommentarfrist: ISO 7010:2011/DAmd 195 Safety sign P046: Do not stretch out of toboggan Kommentarfrist: ISO 7010:2011/DAmd 196 Safety sign P047: Do not ram into toboggans Kommentarfrist: ISO 7010:2011/DAmd 197 Safety sign W042: Warning; Arc flash Kommentarfrist: ISO 7010:2011/DAmd 198 Safety sign P043: Not for people in the state of intoxication Kommentarfrist: ISO 9687:2015/DAmd 1 Kommentarfrist: ISO/DIS 1703 Assembly tools for screws and nuts - Nomenclature Kommentarfrist: ISO/DIS 2553 Welding and allied processes -- Symbolic representation on drawings -- Welded, brazed and soldered joints Kommentarfrist: ISO/DIS 5288 Synchronous belt drives - Vocabulary [Revision of first edition (ISO 5288:1982)] Synchronous belt drives - Vocabulary [Revision of first edition (ISO 5288:1982)] Kommentarfrist: ISO/DIS 7345 Thermal performance of buildings and building components -- Physical quantities and definitions Kommentarfrist: Listenummer: 9/2017 Side: 3 av 142

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Crop protection - Sprayer nozzles - Colour coding for identification Kommentarfrist: ISO/DIS Equipment for crop protection -- Sprayer nozzles -- Colour coding for identification Kommentarfrist: ISO/DIS Nuclear energy, nuclear technologies, and radiological protection -- Vocabulary -- Part 5: Nuclear reactors Kommentarfrist: ISO/DIS Ceramic tiles -- Definitions, classification, characteristics and marking Kommentarfrist: ISO/DIS Resistance welding -- Vocabulary -- Part 1: Spot, projection and seam welding Kommentarfrist: ISO/DIS Information and documentation -- International library item identifier(ilii) Kommentarfrist: ISO/DIS Security and resilience -- Terminology Kommentarfrist: ISO/DIS Quantities and units -- Part 1: General Kommentarfrist: ISO/DIS Quantities and units -- Part 1: General Kommentarfrist: ISO/DIS Quantities and units -- Part 9: Physical chemistry and molecular physics Kommentarfrist: ISO/DIS Quantities and units -- Part 11: Characteristic numbers Kommentarfrist: Listenummer: 9/2017 Side: 4 av 142

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO-standarder ISO 6531:2017 Machinery for forestry -- Portable chain-saws -- Vocabulary Erstatter A00008:20: ISO 14917:2017 Thermal spraying -- Terminology, classification Erstatter A00008:20: ISO :2017 Vitreous and porcelain enamels -- Terminology -- Part 1: Terms and definitions ISO :2017 Vitreous and porcelain enamels -- Terminology -- Part 2: Visual representations and descriptions ISO :2017 Fireworks -- Categories 1, 2 and 3 -- Part 1: Terminology ISO/TR :2017 Photography -- Archiving systems -- Part 1: Best practices for digital image capture of cultural heritage material Rapporter fra CEN (CR) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16981:2016 Photocatalysis - Glossary of terms Listenummer: 9/2017 Side: 5 av 142

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon Fastsatte norske standarder NS-EN ISO 1101:2017 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, retning, beliggenhet og kast (ISO 1101:2017) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) NS-EN ISO 1660:2017 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleransesetting av profiler (ISO 1660:2017) Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017) NS-EN ISO 4885:2017 Jernholdige materialer - Varmebehandlinger - Terminologi (ISO 4885:2017) Ferrous materials - Heat treatments - Vocabulary (ISO 4885:2017) NS-EN ISO 5492:2009/A1:2017 Endringsblad A1 - Sensorisk analyse - Terminologi (ISO 5492:2008/Amd 1:2016) Amendment A1 - Sensory analysis - Vocabulary (ISO 5492:2008/Amd 1:2016) NS-EN ISO 5577:2017 Ikke-destruktiv prøving - Ultralydprøving - Terminologi (ISO 5577:2017) Non-destructive testing - Ultrasonic testing - Vocabulary (ISO 5577:2017) NS-EN ISO 14532:2017 Naturgass - Terminologi (ISO 14532:2014) Natural gas - Vocabulary (ISO 14532:2014) NS-EN ISO/ASTM 52900:2017 Additiv produksjon - Generelle prinsipper - Terminologi (ISO/ASTM 52900:2015) Additive manufacturing - General principles - Terminology (ISO/ASTM 52900:2015) NS-EN ISO/IEC 27000:2017 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Oversikt og terminologi (ISO/IEC 27000:2016) Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) Tilbaketrukne norske standarder NS-EN :2010 Ikke-destruktiv prøving - Terminologi - Del 4: Termer benyttet ved ultralydprøving Non-destructive testing - Terminology - Part 4: Terms used in ultrasonic testing NS-EN 10052:1993 Terminologi for varmebehandling av jern- og stålprodukter Vocabulary of heat treatment terms for ferrous products Listenummer: 9/2017 Side: 6 av 142

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 14610:2004 Sveising og relaterte metoder - Definisjoner for metallsveiseprosesser Welding and allied processes - Definitions of metal welding processes NS-EN ISO 1101:2013 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, retning, beliggenhet og kast (ISO 1101:2012, innbefattet Cor 1:2013) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013) NS-EN ISO 1660:1995 Tekniske tegninger - Mål- og toleransesetting av profiler (ISO 1660:1987) Technical drawings - Dimensioning and tolerancing of profiles (ISO 1660:1987) NS-EN ISO 14532:2005 Naturgass - Terminologi (ISO 14532:2001 innbefattet rettelsesblad 1:2002) Natural gas - Vocabulary (ISO 14532:2001 including Corrigendum 1:2002) NS-ISO/IEC 27000:2016 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Oversikt og terminologi Information technology - Security techniques - Information security management systems - Overview and vocabulary 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren ISO Styringssystemer for næringsmiddeltrygghet - Krav til organisasjoner i næringsmiddelkjeden (ISO/DIS 22000:2017) Food safety management systems - Requirements for any organization in the food chain (ISO/DIS 22000:2017) Kommentarfrist: pren ISO Societal security - Mass evacuation - Guidelines for planning (ISO 22315:2014) Kommentarfrist: pren ISO Societal security - Guidelines for establishing partnering arrangements Kommentarfrist: Listenummer: 9/2017 Side: 7 av 142

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - internasjonale (ISO) ISO/DIS Quality management - Guidelines to quality in project management (Formely CD ) Kommentarfrist: ISO/DIS Quality management systems -- Guidelines for quality management in projects Kommentarfrist: ISO/DIS Intelligent transport systems -- Vehicle interface for provisioning and support of ITS Services -- Part 3: Unified vehicle interface protocol (UVIP) server and client API specification Kommentarfrist: ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: ISO/DIS Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: ISO/DIS Intelligent transport systems -- Co-operative ITS -- Local dynamic map Kommentarfrist: ISO/DIS Quality management systems -- Specific requirements for the application of ISO 9001 and IAEA GS-R requirements by organizations in the supply chain of the nuclear energy sector Kommentarfrist: ISO/DIS Online consumer reviews -- Principles and requirements for their collection, moderation and publication Kommentarfrist: ISO/DIS Security and resilience -- Terminology Kommentarfrist: ISO/DIS Risk management -- Principles and guidelines on implementation Kommentarfrist: Listenummer: 9/2017 Side: 8 av 142

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Risk management -- Guidelines Kommentarfrist: ISO-standarder ISO :2017 Control charts -- Part 8: Charting techniques for short runs and small mixed batches ISO 11121:2017 Recreational diving services -- Requirements for introductory programmes to scuba diving Erstatter A00008:20: ISO 24803:2017 Recreational diving services -- Requirements for recreational diving providers Erstatter A00008:20: ISO 44001:2017 Collaborative business relationship management systems -- Requirements and framework ISO/TS 17429:2017 Intelligent transport systems -- Cooperative ITS -- ITS station facilities for the transfer of information between ITS stations ISO/TS 17574:2017 Electronic fee collection -- Guidelines for security protection profiles Erstatter A00008:20: ISO/TS 19091:2017 Intelligent transport systems -- Cooperative ITS -- Using V2I and I2V communications for applications related to signalized intersections ISO/TS 30407:2017 Human resource management -- Cost-Per-Hire Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TS 17425:2016 Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data (ISO/TS 17425:2016) Listenummer: 9/2017 Side: 9 av 142

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17574:2017 Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2017) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN ISO/TS 19091:2017 Intelligent transport systems - Cooperative ITS - Using V2I and I2V communications for applications related to signalized intersections (ISO/TS 19091:2017) CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR :2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16886:2016 Guidance on the application of statistical methods for determining the properties of masonry products CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing Listenummer: 9/2017 Side: 10 av 142

11 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16405:2017 Intelligent transport systems - Ecall - Additional data concept specification for heavy goods vehicles CEN/TS :2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment CEN/TS :2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE CEN/TS :2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN 9132:2017 Aerospace series - Quality management systems - Data Matrix Quality Requirements for Parts Marking NS-EN 16763:2017 Tjenesteleveranser for brann- og sikkerhetssystemer Services for fire safety systems and security systems NS-EN ISO/IEC 27000:2017 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Oversikt og terminologi (ISO/IEC 27000:2016) Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) NS-EN ISO/IEC 27001:2017 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Krav (ISO/IEC 27001:2013 innbefattet Cor 1:2014 og Cor 2:2015) Information technology - Security techniques - Information security management systems - Requirements (ISO/IEC 27001:2013 including Cor 1:2014 and Cor 2:2015) NS-ISO 20400:2017 Bærekraftige innkjøp - Veiledning Sustainable procurement - Guidance Listenummer: 9/2017 Side: 11 av 142

12 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport NS-ISO/IEC 27003:2017 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Veiledning Information technology - Security techniques - Information security management systems - Guidance Tilbaketrukne norske standarder NS 9400:1993 Førstehånds fiskeomsetning - Sluttseddelens datelementer - Termer og koder First hand fish trade - Data elements of the contract note - Terms and codes Språk: no 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) EN ISO :1999/prA2 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of coagulase-positive staphylococci (Staphylococcus aureus and other species) - Part 1: Technique using Baird-Parker agar medium - Amendment 2: Inclusion of an alternative confirmation procedure (ISO :1999/DAmd 2:2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :1999/DAmd 2 Inclusion of an alternative confirmation procedure Kommentarfrist: ISO/DIS Microbiology of the food chain -- Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli -- Part 1: Colony-count technique at 44 degrees C using membranes and 5-bromo-4-chloro-3-indolyl beta-d-glucuronide Kommentarfrist: ISO/DIS Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of presumptive Escherichia coli - Part 1: Colony-count technique at 44 ºC using membranes and 5-bromo-4-chloro-3-indolyl-ß-D-glucoronic acid Kommentarfrist: ISO-standarder ISO 29621:2017 Cosmetics -- Microbiology -- Guidelines for the risk assessment and identification of microbiologically low-risk products Erstatter A00008:20: ISO/TS 19590:2017 Nanotechnologies -- Size distribution and concentration of inorganic nanoparticles in aqueous media via single particle inductively coupled plasma mass spectrometry Listenummer: 9/2017 Side: 12 av 142

13 07 Matematikk. Naturvitenskap Rapporter fra CEN (CR) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2015) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TR :2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS :2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR Listenummer: 9/2017 Side: 13 av 142

14 07 Matematikk. Naturvitenskap CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS :2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them Fastsatte norske standarder NS-EN ISO :2014/A1:2017 Endringsblad A1 - Vannundersøkelse - Påvisning og telling av Escherichia coli og koliforme bakterier - Del 1: Membranfiltreringsmetode for vann med lav bakgrunnsverdi for bakterietall (ISO :2014/Amd 1:2016) Amendment A1 - Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO :2014/Amd 1:2016) NS-EN ISO 18465:2017 Fôr- og næringsmiddelmikrobiologi - Kvantitativ analyse av emetisk toksin (cereulid) ved bruk av LC-MS/MS (ISO 18465:2017) Microbiology of the food chain - Quantitative determination of emetic toxin (cereulide) using LC-MS/MS (ISO 18465:2017) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO :2016/prA1 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO :2016/DAM 1:2017) Kommentarfrist: EN ISO 9687:2015/prA1 Dentistry - Graphical symbols for dental equipment - Amendment 1 (ISO 9687:2015/DAmd 1:2017) Kommentarfrist: EN ISO 15002:2008/prA1 Flow-metering devices for connection to terminal units of medical gas pipeline systems - Amendment 1 (ISO 15002:2008/DAmd 1:2017) Kommentarfrist: EN ISO 16671:2015/prA1 Ophthalmic implants - Irrigating solutions for ophthalmic surgery - Amendment 1 (ISO 16671:2015/DAM 1:2017) Kommentarfrist: Listenummer: 9/2017 Side: 14 av 142

15 11 Helsevesen, Teknikk EN ISO :2016/prA1 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 1 (ISO :2016/DAmd 1:2017) Kommentarfrist: EN ISO :2016/prA2 Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 3: Forbindelsesstykker for enteral bruk - Endringsblad 2 (ISO :2016/DAmd 2:2017) Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications - Amendment 2 (ISO :2016/DAmd 2:2017) Kommentarfrist: EN ISO :2012/prA2 Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation - Amendment 2 (ISO :2011/DAM 2:2017) Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative carrier test for the evaluation of virucidal activity for instruments used in the medical area - Test method and requirements (phase 2, step 2) Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements - Phase2, step2 Kommentarfrist: pren ISO 7405 Dentistry - Evaluation of biocompatibility of medical devices used in dentistry (ISO/DIS 7405:2017) Kommentarfrist: pren ISO 7492 rev Tannpleie - Sonder Dental explorers Kommentarfrist: pren ISO Dentistry - Stationary dental units and dental patient chairs - Part 1: General requirements and test methods (ISO/DIS :2017) Kommentarfrist: pren ISO Dentistry - Polymer-based crown and veneering materials (ISO/DIS 10477:2017) Kommentarfrist: pren ISO Pressure regulators for use with medical gases - Part 1: Pressure regulators and pressure regulators with flow-metering devices (ISO/DIS :2017) Kommentarfrist: Listenummer: 9/2017 Side: 15 av 142

16 11 Helsevesen, Teknikk pren ISO Pressure regulators for use with medical gases - Part 2: Manifold and line pressure regulators (ISO/DIS :2017) Kommentarfrist: pren ISO Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (VIPRs) (ISO/DIS :2017) Kommentarfrist: pren ISO Dentistry - Powered polymerization activators (ISO/DIS 10650:2017) Kommentarfrist: pren ISO Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO/DIS :2017) Kommentarfrist: pren ISO Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO/FDIS 11978:2017) Kommentarfrist: pren ISO Aseptic processing of health care products - Part 2: Sterilizing filtration (ISO/DIS :2017) Kommentarfrist: pren ISO Non-active surgical implants - Mammary implants - Particular requirements (ISO/DIS 14607:2017) Kommentarfrist: pren ISO Dentistry - Orthodontic anchor screws (ISO/DIS 19023:2017) Kommentarfrist: pren ISO Dentistry - Powder jet handpieces and powders (ISO/DIS 20608:2017) Kommentarfrist: pren ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies - Part 1: General requirements (ISO/DIS :2017) Kommentarfrist: pren ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies - Part 2: Water treatment equipment for haemodialysis applications and related therapies (ISO/DIS :2017) Kommentarfrist: Listenummer: 9/2017 Side: 16 av 142

17 11 Helsevesen, Teknikk pren ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies - Part 3: Water for haemodialysis and related therapies (ISO/DIS :2017) Kommentarfrist: pren ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies - Part 4: Concentrates for haemodialysis and related therapies (ISO/DIS :2017) Kommentarfrist: pren ISO Guidance for the preparation and quality management of fluids for haemodialysis and related therapies - Part 5: Quality of dialysis fluid for haemodialysis and related therapies (ISO/DIS :2017) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 9687:2015/DAmd 1 Kommentarfrist: ISO :2016/DAmd 1. Kommentarfrist: ISO :2016/DAmd 2. Kommentarfrist: ISO :2011/DAmd 2 Kommentarfrist: ISO/DIS Wheelchairs -- Part 2: Determination of dynamic stability of electrically powered wheelchairs Kommentarfrist: ISO/DIS 7405 Dentistry - Preclinical evaluation of biocompatibility of medical devices used in dentistry - Test methods Kommentarfrist: ISO/DIS 7405 Dentistry -- Evaluation of biocompatibility of medical devices used in dentistry Kommentarfrist: ISO/DIS 7492 Dental explorers Kommentarfrist: Listenummer: 9/2017 Side: 17 av 142

18 11 Helsevesen, Teknikk ISO/DIS 7492 Dentistry -- Dental explorer Kommentarfrist: ISO/DIS Dentistry -- Dental units -- Part 1: General requirements and test methods Kommentarfrist: ISO/DIS Dentistry -- Stationary dental units and dental patient chairs -- Part 1: General requirements and test methods Kommentarfrist: ISO/DIS Dentistry -- Polymer-based crown and bridge materials Kommentarfrist: ISO/DIS Dentistry -- Polymer-based crown and veneering materials Kommentarfrist: ISO/DIS Pressure regulators for use with medical gas systems -- Part 1: Pressure regulators and pressure regulators with flow-metering devices Kommentarfrist: ISO/DIS Pressure regulators for use with medical gases -- Part 2: Manifold and line pressure regulators Kommentarfrist: ISO/DIS Pressure regulators for use with medical gases -- Part 3: Pressure regulators integrated with cylinder valves Kommentarfrist: ISO/DIS Dentistry -- Powered polymerization activators Kommentarfrist: ISO/DIS Dentistry -- Powered polymerization activators Kommentarfrist: ISO/DIS Biological evaluation of medical devices -- Part 1: Evaluation and testing within a risk management process Kommentarfrist: Listenummer: 9/2017 Side: 18 av 142

19 11 Helsevesen, Teknikk ISO/DIS Biological evaluation of medical devices - Part 1: Evaluation and testing Kommentarfrist: ISO/DIS Optics and optical instruments - Lasers and laser-related equipment - Determination of laser resistance of tracheal tube shafts Kommentarfrist: ISO/DIS Aseptic processing of health care products -- Part 2: Sterilizing filtration Kommentarfrist: ISO/DIS Aseptic processing of health care products - Part 2: Filtration Kommentarfrist: ISO/DIS Implants for surgery -- Hydroxyapatite -- Part 2: Coatings of hydroxyapatite Kommentarfrist: ISO/DIS Implants for surgery - Hydroxyapatite - Part 4: Determination of coating adhesion strength Kommentarfrist: ISO/DIS Pen systems -- Part 2: Plunger stoppers for pen-injectors for medical use Kommentarfrist: ISO/DIS Implants for surgery - Specific requirements for mammary implants Kommentarfrist: ISO/DIS Non-active surgical implants -- Mammary implants -- Particular requirements Kommentarfrist: ISO/DIS Connectors for reservoir delivery systems for healthcare applications -- Part 1: General requirements and common test methods Kommentarfrist: ISO/DIS Dentistry -- Orthodontic anchor screws Kommentarfrist: Listenummer: 9/2017 Side: 19 av 142

20 11 Helsevesen, Teknikk ISO/DIS Molecular in vitro diagnostic examinations -- Specifications for pre-examination processes for venous whole blood -- Part 1: Isolated cellular RNA Kommentarfrist: ISO/DIS Molecular in vitro diagnostic examinations -- Specifications for pre-examination processes for venous whole blood -- Part 2: Isolated genomic DNA correct Kommentarfrist: ISO/DIS Dentistry -- Trephine burs Kommentarfrist: ISO/DIS Dentistry -- Powder jet handpieces and powders Kommentarfrist: ISO/DIS Catheter systems for neuraxial application -- Sterile and single-use catheters and accessories Kommentarfrist: ISO/DIS Dentistry -- Reusable cartridge syringes intended for intraligamentary injections Kommentarfrist: ISO/DIS Sterilization of health care products -- Low temperature steam and formaldehyde -- Requirements for development, validation and routine control of a sterilization process for medical devices Kommentarfrist: ISO-standarder ISO :2017 Ophthalmic implants -- Intraocular lenses -- Part 8: Fundamental requirements Erstatter A00008:20:036408,A00008:20: ISO :2017 Implants for surgery -- Active implantable medical devices -- Part 3: Implantable neurostimulators Erstatter A00008:20: ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 2: Codes for decoction pieces ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 3: Codes for Chinese Materia Medica Listenummer: 9/2017 Side: 20 av 142

21 11 Helsevesen, Teknikk ISO :2017 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 4: Codes for granule forms of individual medicinals for prescriptions ISO 19610:2017 Traditional Chinese medicine -- General requirements for industrial manufacturing process of red ginseng (Panax ginseng C.A. Meyer) ISO/TR 13154:2017 Medical electrical equipment -- Deployment, implementation and operational guidelines for identifying febrile humans using a screening thermograph Erstatter A00008:20: Rapporter fra CEN (CR) CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA CEN/TS :2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma Listenummer: 9/2017 Side: 21 av 142

22 11 Helsevesen, Teknikk CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16945:2016 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma Fastsatte norske standarder NS-EN 868-2:2017 Emballasje for sluttsterilisert medisinsk utstyr - Del 2: Steriliseringsomslag - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 2: Sterilization wrap - Requirements and test methods NS-EN 868-3:2017 Emballasje for sluttsterilisert medisinsk utstyr - Del 3: Papir til bruk i produksjon av papirposer (spesifisert i EN 868-4) og i produksjon av poser og ruller (spesifisert i EN 868-5) - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods NS-EN 868-4:2017 Emballasje for sluttsterilisert medisinsk utstyr - Del 4: Papirposer - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods NS-EN 868-6:2017 Emballasje for sluttsterilisert medisinsk utstyr - Del 6: Papir for lavtempererte steriliseringsprosesser - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods NS-EN 868-7:2017 Emballasje for sluttsterilisert medisinsk utstyr - Del 7: Papir med klebefilm for lavtempererte steriliseringsprosesser - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods NS-EN 14790:2017 Utslipp fra stasjonære kilder - Bestemmelse av vanndampen i kanaler - Standard referansemetode Stationary source emissions - Determination of the water vapour in ducts - Standard reference method NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Generelle krav - Del 1: Kontrast Railway applications - Design for PRM use - General requirements - Part 1: Contrast NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Generelle krav - Del 2: Informasjon Railway applications - Design for PRM use - General requirements - Part 2: Information Listenummer: 9/2017 Side: 22 av 142

23 11 Helsevesen, Teknikk NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Generelle krav - Del 3: Egenskaper for optikk og friksjon Railway applications - Design for PRM use - General requirements - Part 3: Optical and friction characteristics NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Utstyr og komponenter om bord på rullende materiell - Del 1: Toaletter Railway applications - Design for PRM use - Equipment and components onboard rolling stock - Part 1: Toilets NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Utstyr og komponenter om bord på rullende materiell - Del 2: Elementer for å sitte, stå og bevege seg Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 2: Elements for sitting, standing and moving NS-EN :2017 Jernbane - Utforming for personer med nedsatt funksjonsevne - Utstyr og komponenter om bord på rullende materiell - Del 3: Korridorer, passasjer og innvendige dører Railway applications - Design for PRM use - Equipment and components on board rolling stock - Part 3: Clearways and internal doors NS-EN :2016 Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 5: Forbindelsesstykker til bruk ved oppblåsing av mansjetter Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications NS-EN :2016/AC:2017 Rettelsesblad AC - Forbindelsesstykker med liten diameter for væsker og gass til medisinsk bruk - Del 5: Forbindelsesstykker til bruk ved oppblåsing av mansjetter Corrigendum AC - Small-bore connectors for liquids and gases in healthcare applications - Part 5: Connectors for limb cuff inflation applications NS-EN ISO :2017 Transfusjonsutstyr til medisinsk bruk - Del 3: Blodprøvetakingsett til engangsbruk (ISO :2016) Transfusion equipment for medical use - Part 3: Blood-taking sets for single use (ISO :2016) NS-EN ISO 7199:2017 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO 7199:2016) Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199:2016) NS-EN ISO :2017 Helseinformatikk - Kommunikasjon med personlig helseutstyr - Del 00103: Oversikt (ISO/IEEE :2015) Health informatics - Personal health device communication - Part 00103: Overview (ISO/IEEE :2015) NS-EN ISO :2017 Helseinformatikk - Kommunikasjon med personlig helseutstyr - Del 10441: Instrumentspesifikasjon - Kondisjons- og aktivitetsmåler (ISO/IEEE :2015) Health informatics - Personal health device communication - Part 10441: Device specialization - Cardiovascular fitness and activity monitor (ISO/IEEE :2015) Listenummer: 9/2017 Side: 23 av 142

24 11 Helsevesen, Teknikk NS 7400:2017 Legemiddel - Brukerpåførte etiketter for sprøyter, infusjonsposer, kassetter og lignende - Farger, utforming og ytelse Medicals - User-applied labels for syringes, infusion bags, cassettes and similar - Colours, design and performance Språk: no Tilbaketrukne norske standarder NS-EN 868-3:2009 Pakkematerialer for sluttsterilisering av medisinsk utstyr - Del 3: Papir til bruk i produksjon av papirposer (spesifisert i NS-EN 868-4) og i produksjon av poser og ruller (spesifisert i NS-EN 868-5) - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 3: Paper for use in the manufacture of paper bags (specified in EN 868-4) and in the manufacture of pouches and reels (specified in EN 868-5) - Requirements and test methods NS-EN 868-4:2009 Pakkematerialer for sluttsterilisering av medisinsk utstyr - Del 4: Papirposer - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 4: Paper bags - Requirements and test methods NS-EN 868-6:2009 Pakkematerialer for sluttsterilisering av medisinsk utstyr - Del 6: Papir for steriliseringsprosesser ved lav temperatur - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 6: Paper for low temperature sterilization processes - Requirements and test methods NS-EN 868-7:2009 Pakkematerialer for sluttsterilisering av medisinsk utstyr - Del 7: Papir med klebefilm for steriliseringsprosesser ved lav temperatur - Krav og prøvingsmetoder Packaging for terminally sterilized medical devices - Part 7: Adhesive coated paper for low temperature sterilization processes - Requirements and test methods NS-EN :2005+A1:2009 Trakeostomituber - Del 2: Barnetuber (ISO :2001, modifisert) Tracheostomy tubes - Part 2: Paediatric tubes (ISO :2001, modified) NS-EN 12184:2009 Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods NS-EN 14790:2005 Utslipp fra stasjonære kilder - Bestemmelse av vanndampen i kanaler Stationary source emissions - Determination of the water vapour in ducts Listenummer: 9/2017 Side: 24 av 142

25 11 Helsevesen, Teknikk NS-EN ISO 7199:2014 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO 7199: Amd 1:2012) Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO 7199: Amd 1:2012) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - nasjonale prns 8176 Vibrasjoner og støt - Måling i bygninger av vibrasjoner fra landbasert samferdsel, vibrasjonsklasser og veiledning for bedømmelse av virkning på mennesker Vibration and shock - Measurement of vibration in buildings from landbased transport, vibration classification and guidance to evaluation of effects on human beings Språk: no Kommentarfrist: Standardforslag til høring - europeiske (CEN) EN ISO :2008/prA1 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 1: Method using freshly prepared bacteria - Amendment 1 (ISO :2007/DAM 1:2017) Kommentarfrist: EN ISO :2008/prA1 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 2: Method using liquid-dried bacteria - Amendment 1 (ISO :2007/DAM 1:2017) Kommentarfrist: EN ISO :2008/prA1 Water quality - Determination of the inhibitory effect of water samples on the light emission of Vibrio fischeri (Luminescent bacteria test) - Part 3: Method using freeze-dried bacteria - Amendment 1 (ISO :2007/DAM 1:2017) Kommentarfrist: pren 358 Personlig verneutstyr for støtte og sikring mot fall fra høyder - Støttebelter og lengdejusterbare forbindelsesliner for støttebelter Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint Kommentarfrist: pren 358 Personal protective equipment for work positioning and prevention of falls from a height - Belts and lanyards for work positioning or restraint Kommentarfrist: pren Fire resistance tests for service installations - Part 13: Chimneys Kommentarfrist: Listenummer: 9/2017 Side: 25 av 142

26 13 Miljøvern. Helsevern. Sikkerhet pren Protective footwear for motorcycle riders - Requirements and test methods Kommentarfrist: pren Protective garments for motorcycle riders - Part 1: Test methods Kommentarfrist: pren Protective garments for motorcycle riders - Part 2: Heavy-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 3: Medium-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 4: Light-duty protective garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 5: Light-duty abrasion protection garments - Requirements Kommentarfrist: pren Protective garments for motorcycle riders - Part 6: Impact protectors ensemble garments - Requirements Kommentarfrist: pren Domestic appliances used for drinking water treatment not connected to water supply - Jug water filter systems - Safety and performance requirements, labeling and information to be supplied Kommentarfrist: pren ISO Ergonomics of human-system interaction - Part 220: Processes for enabling, executing and assessing human-centred design within organizations (ISO/DIS :2017) Kommentarfrist: pren ISO Ergonomics of human-system interaction - Part 220: Processes for enabling, executing and assessing human-centred design within organizations (ISO/DIS :2017) Kommentarfrist: pren ISO 9698 Water quality - Tritium - Test method using liquid scintillation counting (ISO/DIS 9698:2017) Kommentarfrist: Listenummer: 9/2017 Side: 26 av 142

27 13 Miljøvern. Helsevern. Sikkerhet pren ISO Water quality - Gross alpha and gross beta activity - Test method using thin source deposit (ISO/DIS 10704:2017) Kommentarfrist: pren ISO Jordkvalitet - Bestemmelse av effektiv kationbyttekapasitet og basemetningsnivå ved bruk av bariumkloridløsning (ISO/DIS 11260:2017) Soil quality - Determination of effective cation exchange capacity and base saturation level using barium chloride solution (ISO/DIS 11260:2017) Kommentarfrist: pren ISO Soil quality - Determination of exchangeable acidity using barium chloride solution as extractant (ISO/DIS 14254:2017) Kommentarfrist: pren ISO Soil quality - Characterization of contaminated soil related to groundwater protection (ISO/DIS 15175:2017) Kommentarfrist: pren ISO Radiological protection - Procedures for monitoring the dose to the lens of the eye, the skin and the extremities (ISO 15382:2015) Kommentarfrist: pren ISO Soil quality - Effects of pollutants on juvenile land snails (Helicidae) - Determination of the effects on growth by soil contamination (ISO/DIS 15952:2017) Kommentarfrist: pren ISO Radiological protection - Performance criteria for laboratories using the cytokinesis block micronucleus (CBMN) assay in peripheral blood lymphocytes for biological dosimetry (ISO 17099:2014) Kommentarfrist: pren ISO Measurement of radioactivity in the environment - Soil - Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples (ISO :2015) Kommentarfrist: pren ISO Measurement of radioactivity in the environment - Soil - Part 3: Test method of gamma-emitting radionuclides using gamma-ray spectrometry (ISO :2015) Kommentarfrist: pren ISO Radiological protection - Performance criteria for service laboratories performing biological dosimetry by cytogenetics (ISO 19238:2014) Kommentarfrist: Listenummer: 9/2017 Side: 27 av 142

28 13 Miljøvern. Helsevern. Sikkerhet pren ISO Water quality - Determination of dissolved perchlorate - Method using ion chromatography (IC) (ISO/DIS 19340:2017) Kommentarfrist: pren ISO Radiation protection - Monitoring of workers occupationally exposed to a risk of internal contamination with radioactive material (ISO 20553:2006) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 1: Conceptual basis for measurements (ISO :2012) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 2: Characterization of instrument response (ISO :2011) Kommentarfrist: pren ISO Dosimetry for exposures to cosmic radiation in civilian aircraft - Part 3: Measurements at aviation altitudes (ISO :2015) Kommentarfrist: pren ISO Reference radiation fields for radiation protection - Definitions and fundamental concepts (ISO 29661:2012, including Amd 1:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2007/DAmd 1 Kommentarfrist: ISO :2007/DAmd 1 Kommentarfrist: ISO :2007/DAmd 1 Kommentarfrist: ISO/DIS Akustikk - Referanseverdier til kalibrering av audiometre - Del 1: Ekvivalente referanselydtrykknivåer for rentoner og supra-aurale øretelefoner Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 1: Reference equivalent threshold sound pressure levels for pure tones and supra-aural earphones Kommentarfrist: ISO/DIS Ergonomics of human-system interaction -- Part 220: Processes for enabling, executing and assessing human-centred design within organizations Kommentarfrist: Listenummer: 9/2017 Side: 28 av 142