Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 12/2015 Standardiseringsprosjekter og nye standarder Listenummer: 12/2015 Side: 1 av 134

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren Ventiler - Terminologi - Del 2: Definisjon av komponenter av ventiler Valves - Terminology - Part 2: Definition of components of valves Kommentarfrist: pren ISO 1101 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og kjøre ut (ISO/DIS 1011: 2014) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015) Kommentarfrist: pren ISO 1101 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og utkjøring ( ISO/DIS 1101 : 2015 ) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015) Kommentarfrist: pren ISO 5458 rev Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO/DIS 5458:2015) Kommentarfrist: pren ISO 5577 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 7001:2007/DAmd 87 Symbol PI BP 009: Biometric facial recognition facility Kommentarfrist: ISO 7001:2007/DAmd 88 Symbol PI BP 010: Look to a point Kommentarfrist: ISO 7001:2007/DAmd 77 Symbol PI BP 015: No headwear Kommentarfrist: ISO 7001:2007/DAmd 79 Symbol PI BP 017: No sunglasses Kommentarfrist: Listenummer: 12/2015 Side: 2 av 134

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 80 Symbol PI BP 018: Single person Kommentarfrist: ISO 7001:2007/DAmd 81 Symbol PI PF 037: Library Kommentarfrist: ISO 7001:2007/DAmd 82 Symbol PI BP 019: Proceed forward Kommentarfrist: ISO 7001:2007/DAmd 83 Symbol PI TF 036: Self-contained camper van Kommentarfrist: ISO 7001:2007/DAmd 71 Symbol PI TF 034: Quarantine, plant Kommentarfrist: ISO 7001:2007/DAmd 86 Symbol PI BP 012: Move hair Kommentarfrist: ISO 7001:2007/DAmd 78 Symbol PI BP 016: Wait Kommentarfrist: ISO 7001:2007/DAmd 74 Symbol PI PF 072: Loop for the hearing impaired Kommentarfrist: ISO 7001:2007/DAmd 75 Symbol PI BP 014: Do not smile Kommentarfrist: ISO 7001:2007/DAmd 76 Symbol PI BP 013: Open passport and place on scanning device Kommentarfrist: ISO 7001:2007/DAmd 89 Symbol PI CF 019: Shoeshine Kommentarfrist: ISO 7001:2007/DAmd 90 Symbol PI CF 020: Snack machine Kommentarfrist: Listenummer: 12/2015 Side: 3 av 134

4 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 91 Symbol PI PF 073: Priority facilities for obese people Kommentarfrist: ISO 7001:2007/DAmd 92 Symbol PI TF 038: Animal transportation Kommentarfrist: ISO 7001:2007/DAmd 93 Symbol PI TF 039: Bus disembarkation Kommentarfrist: ISO 7001:2007/DAmd 94 Symbol PI TF 040: Bus embarkation Kommentarfrist: ISO 7001:2007/DAmd 95 Symbol PI TF 041: Priority seats for obese people Kommentarfrist: ISO 7001:2007/DAmd 85 Symbol PI BP 011: Manual passport control Kommentarfrist: ISO 7001:2007/DAmd 61 Symbol PI TF 029: Rental bicycle Kommentarfrist: ISO 7001:2007/DAmd 69 Symbol PI TF 032: Quarantine, animal Kommentarfrist: ISO 7001:2007/DAmd 68 Symbol PI TF 031: Quarantine Kommentarfrist: ISO 7001:2007/DAmd 70 Symbol PI TF 033: Quarantine, people Kommentarfrist: ISO/DIS Technical drawings - Indication of dimensions and tolerances - Part 1: General principles Kommentarfrist: Listenummer: 12/2015 Side: 4 av 134

5 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: ISO/DIS Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out Kommentarfrist: ISO/DIS Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipment Kommentarfrist: ISO/DIS 5577 Non-destructive testing - Ultrasonic inspection - Vocabulary Kommentarfrist: ISO/DIS 5577 Non-destructive testing -- Ultrasonic testing -- Vocabulary Kommentarfrist: ISO/DIS Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols Kommentarfrist: ISO/DIS Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: ISO/DIS Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: ISO/DIS Public information guidance systems -- Part 2: Design principles and requirements for location signs and direction signs Kommentarfrist: ISO-standarder ISO 7504:2015 Gas analysis -- Vocabulary Erstatter A00008:20: Listenummer: 12/2015 Side: 5 av 134

6 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO :2015 Process diagrams for power plants -- Part 2: Graphical symbols ISO/TS 19408:2015 Footwear -- Sizing -- Vocabulary and terminology ISO/TS :2015 Language resource management -- Controlled natural language (CNL) -- Part 1: Basic concepts and principles ISO/TS :2015 Nanotechnologies -- Vocabulary -- Part 2: Nano-objects Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS :2011) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Fastsatte norske standarder NS-EN 459-1:2015 Bygningskalk - Del 1: Definisjoner, krav og samsvarskriterier Building lime - Part 1: Definitions, specifications and conformity criteria NS-EN 764-1:2015 Trykkpåkjent utstyr - Del 1: Terminologi Pressure equipment - Part 1: Vocabulary Listenummer: 12/2015 Side: 6 av 134

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 13986:2004+A1:2015 Trebaserte plater til bruk i bygg og anlegg - Egenskaper, evaluering av samsvar og merking Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking NS-EN :2015 Feiemaskiner - Del 4: Symboler for kontrollpaneler og andre skjermer Sweepers - Part 4: Symbols for operator controls and other displays NS-EN 15987:2015 Lær - Terminologi - Sentrale definisjoner i lærbransjen Leather - Terminology - Key definitions for the leather trade NS-EN ISO :2015 Teknisk produktsdokumentasjon - Skrift - Del 1: Generelle krav (ISO :2015) Technical product documentation - Lettering - Part 1: General requirements (ISO :2015) NS-EN ISO :2015 Geosynteter - Del 1: Termer og definisjoner (ISO :2015) Geosynthetics - Part 1: Terms and definitions (ISO :2015) NS-EN ISO :2015 Geosynteter - Del 2: Symboler og piktogrammer (ISO :2015) Geosynthetics - Part 2: Symbols and pictograms (ISO :2015) Tilbaketrukne norske standarder NS-EN 459-1:2010 Bygningskalk - Del 1: Definisjoner, krav og samsvarskriterier Building lime - Part 1: Definitions, specifications and conformity criteria NS-EN 764-1:2004 Trykkpåkjent utstyr - Terminologi - Del 1: Trykk, temperatur, volum, nominell størrelse Pressure equipment - Part 1: Terminology - Pressure, temperature, volume, nominal size NS-EN 764-3:2002 Trykkpåkjent utstyr - Del 3: Definisjon av berørte parter Pressure equipment - Part 3: Definition of parties involved NS-EN 12584:1999 Uregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology Listenummer: 12/2015 Side: 7 av 134

8 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 13986:2004 Trebaserte plater til bruk i bygg og anlegg - Egenskaper, evaluering av samsvar og merking Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking Språk: no NS-EN 13986:2004 Trebaserte plater til bruk i bygg og anlegg - Egenskaper, evaluering av samsvar og merking Wood-based panels for use in construction - Characteristics, evaluation of conformity and marking NS-EN 15987:2011 Lær - Terminologi - Sentrale definisjoner i lærbransjen Leather - Terminology - Key definitions for the leather trade NS-EN ISO :1997 Teknisk produktsdokumentasjon - Skrift - Del 0: Generelle krav (ISO :1997) Technical product documentation - Lettering - Part 0: General requirements (ISO :1997) NS-EN ISO 10318:2005 Geosynteter - Termer og definisjoner (ISO 10318:2005) Geosynthetics - Terms and definitions (ISO 10318:2005) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Vedlikehold - Retningslinjer for utarbeidelse av vedlikeholdskontrakter Maintenance - Guideline on preparation of maintenance contracts Kommentarfrist: pren rev Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail Kommentarfrist: pren Skjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten Beauty Salon Services - Requirements and recommendations for the provision of service Kommentarfrist: pren Skjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten Beauty Salon Services - Requirements and recommendations for the provision of service Kommentarfrist: Listenummer: 12/2015 Side: 8 av 134

9 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren Services for fire safety systems and security systems Kommentarfrist: pren Services for fire safety systems and security systems Kommentarfrist: pren Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Core Banking -- Mobile Financial Services -- Part 1: General framework Kommentarfrist: ISO/DIS Core banking -- Mobile Financial Services -- Part 2: Security and data protection for mobile financial services Kommentarfrist: ISO/DIS Core Banking -- Mobile Financial Services -- Part 3: Financial application lifecycle management Kommentarfrist: ISO/DIS Core Banking -- Mobile Financial Services -- Part 4: Mobile payments-to-person Kommentarfrist: ISO/DIS Core Banking -- Mobile Financial Services -- Part 5: Mobile Payments to Business Kommentarfrist: ISO/DIS Translation services -- Post-editing of machine translation output -- Requirements Kommentarfrist: ISO-standarder ISO 13810:2015 Tourism services -- Industrial tourism -- Service provision ISO/TR :2015 Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperation Listenummer: 12/2015 Side: 9 av 134

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries -- Guidelines on competency for personnel ISO/TS 18750:2015 Intelligent transport systems -- Cooperative systems -- Definition of a global concept for Local Dynamic Maps Rapporter fra CEN (CR) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR :2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS :2013 Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS :2013) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS :2013) Listenummer: 12/2015 Side: 10 av 134

11 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS ) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 10345:2013 Retningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR :2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing CEN/TS :2013 Innovasjonsledelse - Del 1: System for innovasjonsledelse Innovation Management - Part 1: Innovation Management System CEN/TS :2014 Innovation management - Part 2: Strategic intelligence management CEN/TS :2014 Innovation management - Part 3: Innovation thinking CEN/TS :2014 Innovation management - Part 4: Intellectual property management CEN/TS :2014 Innovation management - Part 5: Collaboration management Listenummer: 12/2015 Side: 11 av 134

12 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS :2014 Innovation management - Part 6: Creativity management CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability CEN/TS :2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS :2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN 16072:2015 Intelligente transportsystemer - E-sikkerhet - Felles europeiske driftskrav til automatisk nødanrop (ecall) Intelligent transport systems - ESafety - Pan-European ecall operating requirements NS-EN 16494:2015 Jernbane - Krav til ERTMS-skilting ved spor Railway applications - Requirements for ERTMS Trackside Boards NS-EN 16636:2015 Tjenester for skadedyrbekjemping - Krav og kompetanse Pest management services - Requirements and competences NS-ISO 10002:2014 Kvalitetsledelse - Kundetilfredshet - Retningslinjer for organisasjoners behandling av klager Quality management - Customer satisfaction - Guidelines for complaints handling in organizations Tilbaketrukne norske standarder NS-EN 16072:2011 Intelligente transportsystemer - E-sikkerhet - Felles europeiske driftskrav til automatisk nødanrop (ecall) Intelligent transport systems - esafety - Pan-European ecall operating requirements NS-ISO 10002:2004 Kvalitetsstyring - Kundetilfredshet - Retningslinjer for organisasjoners behandling av klager Quality management - Customer satisfaction - Guidelines for complaints handling in organizations Språk: no Listenummer: 12/2015 Side: 12 av 134

13 07 Matematikk. Naturvitenskap 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: ISO-standarder ISO 18458:2015 Biomimetics -- Terminology, concepts and methodology ISO 18459:2015 Biomimetics -- Biomimetic structural optimization ISO/TS 17728:2015 Microbiology of the food chain -- Sampling techniques for microbiological analysis of food and feed samples ISO/TS :2015 Nanotechnologies -- Vocabulary -- Part 2: Nano-objects Erstatter A00008:20: Rapporter fra CEN (CR) CEN ISO/TR :2014 Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR :2014) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS :2010) CEN ISO/TS :2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS :2011) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 13830:2013 Nanoteknologi - Veiledning om frivillig merking av forbrukerprodukter som inneholder produserte nanoobjekter (ISO/TS 1380:2013) Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013) Listenummer: 12/2015 Side: 13 av 134

14 07 Matematikk. Naturvitenskap CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS 17919:2013 Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013) Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS :2013) CEN ISO/TS :2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS :2013) CEN/TR :2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TR 16588:2014 Manual measurement of snow water equivalent 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 21535:2009/prA1 Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for hofteleddsimplantater (ISO21535:2007/DAM1:2015) Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants (ISO 21535:2007/DAM 1:2015) Kommentarfrist: pren Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: pren ISO 1797 Tannpleie - Skaft for roterende, vibrerende og stemplende instrumenter (ISO/DIS 1797:2015) Dentistry - Shanks for rotary, oscillating and reciprocating instruments (ISO/DIS 1797:2015) Kommentarfrist: Listenummer: 12/2015 Side: 14 av 134

15 11 Helsevesen, Teknikk pren ISO 7199 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO/DIS 7199:2015) Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO/DIS 7199:2015) Kommentarfrist: pren ISO rev Tannpleie - Laboratoriefresere - Del 1: Stålfresere til laboratoriebruk (ISO/DIS :2015) Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO/DIS :2015) Kommentarfrist: pren ISO Nål-baserte innsprøytningssystemer til medisinsk bruk - Krav og prøvingsmetoder - Del 7: Tilgjengelighet for personer med nedsatt syn (ISO/DIS : 2015) Needle-based injection systems for medical use - Requirements and test methods - Part 7: Accessibility for persons with visual impairment (ISO/DIS :2015) Kommentarfrist: pren ISO Oftalmisk optikk - Brilleinnfatninger - Krav og prøvingsmetoder (ISO/DIS 12870: 2015) Ophthalmic optics - Spectacle frames - Requirements and test methods (ISO/DIS 12870:2015) Kommentarfrist: pren ISO Dentistry - Interoperability of CAD/CAM-systems Kommentarfrist: pren ISO rev Kardiovaskulære implantater - Endovaskulært utstyr - Del 1: Endovaskulære proteser (ISO/DIS :2015) Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 5359:2014/DAmd 1 Anestesi og respirasjonsutstyr - Lavtrykks-slangekonstruksjoner for bruk med medisinske gasser (ISO/FDIS 5359:2014) Kommentarfrist: ISO/DIS 1797 Dentistry -- Shanks for rotary, oscillating and reciprocating instruments Kommentarfrist: ISO/DIS 7199 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere Cardiovascular implants and artificial organs - Blood-gas exchangers Kommentarfrist: ISO/DIS Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters Kommentarfrist: Listenummer: 12/2015 Side: 15 av 134

16 11 Helsevesen, Teknikk ISO/DIS Infusion equipment for medical use -- Part 13: Graduated flow regulators for single use with fluid contact Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 14: Clamps and flow regulators for transfusion and infusion equipment without fluid contact Kommentarfrist: ISO/DIS Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 5: Functional requirements and testing Kommentarfrist: ISO/DIS Elastomeric parts for parenterals and for devices for pharmaceutical use -- Part 5: Functional requirements and testing Kommentarfrist: ISO/DIS 9999 Technical aids for disabled persons - Classification (Revision of first edition (ISO 9999:1992)) Kommentarfrist: ISO/DIS 9999 Assistive products for persons with disability -- Classification and terminology Kommentarfrist: ISO/DIS Prefilled syringes -- Part 8: Requirements and test methods for finished prefilled syringes Kommentarfrist: ISO/DIS Needle-based injection systems for medical use -- Requirements and test methods -- Part 7: Accessibility for persons with visual impairment Kommentarfrist: ISO/DIS Ophthalmic optics - Spectacle frames - Fundamental requirements and test methods Kommentarfrist: ISO/DIS Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir system (with/without filter) and soft venous reservoir bags Kommentarfrist: ISO/DIS Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters Kommentarfrist: Listenummer: 12/2015 Side: 16 av 134

17 11 Helsevesen, Teknikk ISO/DIS Cardiovascular implants and artificial organs -- Single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation Kommentarfrist: ISO/DIS Dentistry -- Coiled springs for use in orthodontics Kommentarfrist: ISO/DIS Dentistry -- Interoperability of CAD/CAM Systems Kommentarfrist: ISO/DIS Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses Kommentarfrist: ISO/DIS Medical Electrical Equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement Kommentarfrist: ISO/DIS Medical electrical equipment -- Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement Kommentarfrist: ISO-standarder ISO 16971:2015 Ophthalmic instruments -- Optical coherence tomograph for the posterior segment of the human eye ISO 19045:2015 Ophthalmic optics -- Contact lens care products -- Method for evaluating Acanthamoeba encystment by contact lens care products ISO/TR :2015 Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC ISO/TS 17518:2015 Medical laboratories -- Reagents for staining biological material -- Guidance for users Listenummer: 12/2015 Side: 17 av 134

18 11 Helsevesen, Teknikk Rapporter fra CEN (CR) CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the application of ISO and ISO (ISO/TS 16775:2014) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 16677:2014 Øyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release Fastsatte norske standarder NS-EN 455-2:2015 Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties NS-EN 455-3:2015 Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation NS-EN :2010+A1:2015 Utstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher NS-EN :2012+A1:2015 Bårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher NS-EN 13697:2015 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ ikke-porøs overflateprøving til evaluering av baktericid-aktivitet og/eller fungicidal aktivitet av kjemiske desinfeksjonsmidler til bruk i mat, for industri- og hjemmebruk og i institusjoner - Prøvingsmetode og krav uten mekanisk handling (fase 2, trinn 2) Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2, step 2) NS-EN :2015 Ambulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances Listenummer: 12/2015 Side: 18 av 134

19 11 Helsevesen, Teknikk NS-EN 14675:2015 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonsprøving for evaluering av virucidal aktivitet av kjemiske desinfeksjonsmidler og antiseptika brukt på veterinærområdet - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (Phase 2, step 1) NS-EN 16442:2015 Skap med kontrollert miljø for oppbevaring av behandlede termolabilie endoskop Controlled environment storage cabinet for processed thermolabile endoscopes NS-EN 16615:2015 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ prøvingsmetode for evaluering av baktericidaktivitet og gjæringsaktivitet på ikke-porøse overflater med mekanisk påvirkning ved hjelp av kluter på det medisinske området (4-felts prøving) - Prøvingsmetode og krav (fase 2, trinn 2) Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of bactericidal and yeasticidal activity on nonporous surfaces with mechanical action employing wipes in the medical area (4- field test) - Test method and requirements (phase 2, step 2) NS-EN ISO :2015 Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Hann- og hunnkoner (ISO :2015) Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO :2015) NS-EN ISO 7439:2015 Intrauterine kontraseptiva med kobberinnhold - Krav og prøvinger (ISO 7439:2015) Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2015) NS-EN ISO :2015 Tannpleie - Tannpleieutstyr - Del 2: Systemer for luft, vann, sug og avløpsvann (ISO :2015) Dentistry - Dental units - Part 2: Air, water, suction and wastewater systems (ISO :2015) Tilbaketrukne norske standarder NS-EN 455-3:2006 Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation NS-EN 455-2:2009+A2:2013 Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties NS-EN :2010 Utstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher Listenummer: 12/2015 Side: 19 av 134

20 11 Helsevesen, Teknikk NS-EN :2012 Bårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher NS-EN 13697:2001 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ ikke-porøs overflatetest til evaluering av baktericid-aktivitet og/eller fungicidal aktivitet av kjemiske desinfeksjonsmidler til bruk i mat, for industri- og hjemmebruk og i institusjoner - Prøvingsmetode og krav uten mekanisk handling (fase 2/trinn 2) Chemical disinfectants and antiseptics - Quantitative non-porous surface test for the evaluation of bactericidal and/or fungicidal activity of chemical disinfectants used in food, industrial, domestic and institutional areas - Test method and requirements without mechanical action (phase 2/step 2) NS-EN :2008 Ambulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements of air ambulances NS-EN 14675:2006 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonsprøving for evaluering av virucidal aktivitet av kjemiske desinfeksjonsmidler og antiseptika brukt på veterinærområdet - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) NS-EN ISO :2004 Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Han- og hunkoner (ISO :2004) Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO :2004) NS-EN ISO 7439:2011 Intrauterine kontraseptiva - Krav og prøvinger (ISO 7439:2011) Copper-bearing contraceptive intrauterine devices - Requirements and tests (ISO 7439:2011) NS-EN ISO :2003 Tannpleie - Tannpleieutstyr - Del 2: Luft- og vanntilførsel (ISO :2003) Dentistry - Dental units - Part 2: Water and air supply (ISO :2003) NS-EN ISO 11144:1996 Tannpleieutstyr - Koplinger for tilførsels- og avløpsledninger (ISO 11144:1995) Dental equipment - Connections for supply and waste lines (ISO 11144:1995) Listenummer: 12/2015 Side: 20 av 134

21 13 Miljøvern. Helsevern. Sikkerhet 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN :2011/prA1 Utvidet anvendelse av resultater fra prøving av brannmotstanden til tekniske installasjoner - Del 1: Kanaler Extended application of results from fire resistance tests for service installations - Part 1: Ducts Kommentarfrist: EN ISO 389-7:2005/prA1 Endringsblad 1: Referansehøreterskel ved 20 Hz og Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust feltforhold Reference threshold of hearing at 20 Hz and Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions (ISO 389-7:2005/DAmd 1:2015) Kommentarfrist: pren 1496 Redningsutstyr - Heisemekanismer for redning Personal fall protection equipment - Rescue lifting devices Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 1: Beholdere med kapasitet opptil l med flatt eller buet lokk for løftetapp, dobbeltløftetapp eller pocket løfteutstyr - Mål og utforming Stationary waste containers - Part 1: Containers with a capacity up to l with flat or dome lid(s), for trunnion, double trunnion or pocket lifting device - Dimensions and design Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 2: Ytelseskrav og prøvingsmetoder Stationary waste containers - Part 2: Performance requirements and test methods Kommentarfrist: pren Stasjonære avfallsbeholdere - Del 3: Helse- og sikkerhetskrav Stationary waste containers - Part 3: Safety and health requirements Kommentarfrist: pren Stationary waste containers - Part 4: Waste-Mechatronics Kommentarfrist: pren rev Dobbeltvirkende hydrauliske redningsverktøy for brann og redningstjenestebruk - Sikkerhets- og ytelseskrav Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements Kommentarfrist: Listenummer: 12/2015 Side: 21 av 134

22 13 Miljøvern. Helsevern. Sikkerhet pren Karakterisering av avfall - Halogen- og svovelinnhold - Bestemmelsesmetoder for oksygenforbrenning i lukkede systemer Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods Kommentarfrist: pren Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters Kommentarfrist: pren rev Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters Kommentarfrist: pren Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products Kommentarfrist: pren rev Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products Kommentarfrist: pren Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air Kommentarfrist: pren Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method Kommentarfrist: pren Portable aerosol dispenser for fire extinguishing purposes Kommentarfrist: pren Vannundersøkelse Veiledning for overvåking av elvemusling populasjoner (Margaritifera margaritifera) og deres livsmiljø Water quality - Guidance standard on monitoring freshwater pearl mussel (margaritifera margaritifera) populations and their environment Kommentarfrist: pren Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: Listenummer: 12/2015 Side: 22 av 134

23 13 Miljøvern. Helsevern. Sikkerhet pren ISO Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/DIS 374-1:2015) Kommentarfrist: pren ISO Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organism risks (ISO/DIS 374-5:2015) Kommentarfrist: pren ISO 7029 rev Akustikk - Statistisk fordeling av høreterskler som funksjon av alder (ISO/DIS 7029:2015) Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO/DIS 7029:2015) Kommentarfrist: pren ISO 7243 Ergonomics of the thermal environment - Assessment of heat stress using the WBGT (wet bulb globe temperature) index (ISO/DIS 7243:2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance level Part 2: Safety (German and English version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 3: Level 150 Safety requirements (German and English Version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 4: Level 100 Safety requirements (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Lifejackets, performance - Part 5: Level 50 Safety requirements (German and English version pren ISO :2015) (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Part 7: Materials and components - Safety requirements and test methods (ISO/DIS :2015) Kommentarfrist: pren ISO Personal flotation devices - Accessories - Part 8: Safety requirements and test methods (German and English version pren ISO ) (ISO/DIS :2015) Kommentarfrist: Listenummer: 12/2015 Side: 23 av 134

24 13 Miljøvern. Helsevern. Sikkerhet pren ISO Personal flotation devices - Part 9: Test methods (ISO/DIS :2015) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO 389-7:2005/DAmd 1 Endringsblad 1: Referansehøreterskel ved 20 Hz og Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust feltforhold Reference threshold of hearing at 20 Hz and Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions Kommentarfrist: ISO :2005/DAmd 1 Mekaniske vibrasjoner og støt - Kuldeprovokasjonsprøving for vurdering av perifer vaskulær funksjon - Del 1: Måling og vurdering av temperatur på huden på fingeren - Endringsblad 1 Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: ISO/DIS Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: ISO/DIS Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø Acoustics -- Description, assessment and measurement of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: ISO/DIS Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: ISO/DIS 7029 Akustikk - Statistisk fordeling av høreterskler som funksjon av alder Acousticx - Statistical distribution of hearing thresholds as a function of age Kommentarfrist: ISO/DIS 7029 Akustikk - Statistisk fordeling av høreterskler som funksjon av alder Acoustics - Statistical distribution of hearing thresholds related to age and gender Kommentarfrist: Listenummer: 12/2015 Side: 24 av 134

25 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 7243 Ergonomics of the thermal environment -- Assessment of heat stress using the WBGT (wet bulb globe temperature) index Kommentarfrist: ISO/DIS Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber method Kommentarfrist: ISO/DIS Personal flotation devices -- Part 2: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 3: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 4: Lifejackets, performance level Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements Kommentarfrist: ISO/DIS Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices -- Part 9: Test methods Kommentarfrist: ISO/DIS Personal flotation devices - Part 2: Class B (offshore lifejackets, extreme conditions - 275N), safety requirements Kommentarfrist: Listenummer: 12/2015 Side: 25 av 134

26 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Personal flotation devices - Part 3: Class C (offshore lifejackets, extreme conditions - 150N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 4: Class D (inland/close to shore lifejackets N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 5: Class E, (buoyance aids - 50 N), safety requirements Kommentarfrist: ISO/DIS Personal flotation devices - Part 8: Additional items, safety requirements and test methods Kommentarfrist: ISO/DIS Personal flotation devices - Part 9: Test methods for classes A to F Kommentarfrist: ISO/DIS Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal process Kommentarfrist: ISO/DIS Environmental management systems -- General guidelines on principles, systems and support techniques Kommentarfrist: ISO/DIS Environmental management -- Environmental technology verification (ETV) Kommentarfrist: ISO/DIS Stationary source emissions -- Determination of the mass concentration of ammonia in flue gas -- Performance characteristics of automated measuring systems Kommentarfrist: ISO/DIS Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General Kommentarfrist: ISO/DIS Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets Kommentarfrist: Listenummer: 12/2015 Side: 26 av 134

27 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Soil quality -- Sampling -- Part 100: Umbrella Kommentarfrist: ISO/DIS Guidelines for Management of Assets of water supply and wastewater systems -- Part 1: Drinking water distribution networks Kommentarfrist: ISO/DIS Bærekraftig utvikling av samfunn -- Styringssystemer -- Krav med veiledning for motstandsdyktighet og smarthet Sustainable development of communities -- Management systems -- Requirements with guidance for resilience and smartness Kommentarfrist: ISO-standarder ISO :2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 1: General Erstatter A00008:20: ISO :2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 3: Clothing Erstatter A00008:20: ISO :2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 4: Gloves Erstatter A00008:20: ISO :2015 Eye and face protection -- Sunglasses and related eyewear -- Part 2: Filters for direct observation of the sun ISO :2015 Water quality -- Radon Part 4: Test method using two-phase liquid scintillation counting ISO 16505:2015 Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures ISO/TR :2015 Safety of machinery -- Relationship with ISO Part 1: How ISO relates to type-b and type-c standards ISO/TS :2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 2: Compatibility Listenummer: 12/2015 Side: 27 av 134

28 13 Miljøvern. Helsevern. Sikkerhet ISO/TS :2015 Respiratory protective devices -- Human factors -- Part 2: Anthropometrics Erstatter A00008:20:042762,A00008:20: ISO/TS 37151:2015 Smart community infrastructures -- Principles and requirements for performance metrics Rapporter fra CEN (CR) CEN ISO/TR 12296:2013 Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) CEN ISO/TS :2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS :2010) CEN ISO/TR :2013 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR :2012) CEN ISO/TS :2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS :2012) CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) CEN ISO/TS :2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS :2011, Corrected version ) CEN/TR :2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data CEN/TR 15350:2013 Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions Listenummer: 12/2015 Side: 28 av 134