Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 11/2013 Standardiseringsprosjekter og nye standarder Listenummer: 11/2013 Side: 1 av 141

2 00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - europeiske (CEN) EN ISO 21487:2012/prA1 Small craft - Permanently installed petrol and diesel fuel tanks (ISO 21487:2012/DAM 1:2013) Kommentarfrist: pren Shell boilers - Part 3: Design and calculation for pressure parts Kommentarfrist: pren ISO 1660 rev Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO/DIS 1660:2013) Kommentarfrist: pren ISO Petroleum and related products - Determination of the ageing behaviour of inhibited oils and fluids using the TOST test - Part 3: Anhydrous procedure for synthetic hydraulic fluids (ISO/DIS :2013) Kommentarfrist: pren ISO rev Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO/DIS :2013) Kommentarfrist: pren ISO Infusion equipment for medical use - Part 8: Infusion equipment for single use with pressure infusion apparatus (ISO/DIS :2013) Kommentarfrist: pren ISO Infusion equipment for medical use - Part 9: Fluid lines for single use with pressure infusion equipment (ISO/DIS :2013) Kommentarfrist: pren ISO Infusion equipment for medical use - Part 10: Accessories for fluid lines for single use with pressure infusion equipment (ISO/DIS :2013) Kommentarfrist: pren ISO Infusion equipment for medical use - Part 11: Infusion filters for single use with pressure infusion equipment (ISO/DIS :2013) Kommentarfrist: pren ISO Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/DIS :2013) Kommentarfrist: Listenummer: 11/2013 Side: 2 av 141

3 00 ICS-KODE MANGLER ELLER ER FEIL pren ISO Solid biofuels - Determination of ash content (ISO/DIS 18122:2013) Kommentarfrist: pren ISO Solid biofuels - Determination of the content of volatile matter (ISO/DIS 18123:2013) Kommentarfrist: pren ISO Solid biofuels - Determination of moisture content - Oven dry method - Part 1: Total moisture - Reference method (ISO/DIS :2013) Kommentarfrist: pren ISO Solid biofuels - Determination of moisture content - Oven dry method - Part 2: Total moisture - Simplified method (ISO/DIS :2013) Kommentarfrist: pren ISO Solid biofuels - Determination of moisture content - Oven dry method - Part 3: Moisture in general analysis simple (ISO/DIS :2013) Kommentarfrist: pren ISO Small craft - Reciprocating internal combustion engines exhaust emission measurement - Test-bed measurement of gaseous and particulate exhaust emissions (ISO/DIS 18854:2013) Kommentarfrist: pren ISO Leather - Physical and mechanical tests - Determination of water absorption by capillary action (wicking) (ISO/DIS 19074:2013) Kommentarfrist: pren ISO Cryogenic vessels - Large transportable vacuum-insulated vessels - Part 2: Operational requirements (ISO/DIS :2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 464 Rolling bearings with locating snap ring - Dimensions and tolerances Kommentarfrist: ISO/DIS 3271 Iron ores - Determination of tumbler strength [Revision of second edition (ISO 3271:1985)] Kommentarfrist: Listenummer: 11/2013 Side: 3 av 141

4 00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS 4528 Vitreous and porcelain enamel finishes - Selection of test methods for vitreous and porcelain enamelled areas of articles Kommentarfrist: ISO/DIS 4695 Iron ores - Determination of reducibility Kommentarfrist: ISO/DIS Iron ores - Low-temperature disintegration test - Part 1: Method using cold tumbling after static reduction (Revision of ISO 4696:1984) Kommentarfrist: ISO/DIS Iron ores - Static test for low-temperature reduction-disintegration - Part 2: Reaction with CO Kommentarfrist: ISO/DIS 4700 Iron ore pellets - Determination of crushing strenght (Revision of first edition ISO 4700:1983) Kommentarfrist: ISO/DIS 4991 Steel castings for pressure purposes Kommentarfrist: ISO/DIS 6103 Bonded abrasive products - Static balancing of grinding wheels - Testing Kommentarfrist: ISO/DIS Thermoplastics pipes - Determination of tensile properties - Part 1: General test method Kommentarfrist: ISO/DIS Thermoplastics pipes - Determination of tensile properties - Part 3: Polyolefin pipes Kommentarfrist: ISO/DIS 6872 Dental ceramic [Revision of first edition (ISO 6872:1984)] Kommentarfrist: ISO/DIS 7215 Iron ores - Determination of relative reducibility Kommentarfrist: Listenummer: 11/2013 Side: 4 av 141

5 00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS 8371 Iron ores - Determination of decrepitation index Kommentarfrist: ISO/DIS Hydraulic fluid power - Cylinders - Housing dimensions for rectangular-section-cut bearing rings for pistons and rods Kommentarfrist: ISO/DIS Prefilled syringes - Part 4: Glass barrels for injectables Kommentarfrist: ISO/DIS Iron ores - Determination of clustering of pellets for direct reduction by gas reforming processes Kommentarfrist: ISO/DIS Iron ores - Determination of disintegration and metallization of feedstock for direct reduction by gas reforming processes Kommentarfrist: ISO/DIS Iron ores - Determination of reducibility and metallization of feedstock for direct reduction by gas reforming processes Kommentarfrist: ISO/DIS Petroleum and natural gas industries - Offshore platform systems - Functional requirements and guidelines for the control and mitigration of fires and explosions Kommentarfrist: ISO/DIS Plastics piping systems - Elastomeric sealing ring type socket joints of unplasticized poly(vinyl chloride) (PVC-U) for use with PVC- U pipes -Test method for leaktightness under negative pressure Kommentarfrist: ISO/DIS Rørledninger av plast - Muffer for skjøting med elastomerisk tetningsring til bruk for rør av polyvinylklorid uten mykner (UPVC) - Prøvingsmetode for tetthet under innvendig trykk og avbøyning Plastics piping systems - Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride) (PVC-U) pipes - Test method for leaktightness under internal pressure and with angular deflection Kommentarfrist: ISO/DIS Iron ores - Dynamic test for low-temperature reduction-disintegration Kommentarfrist: Listenummer: 11/2013 Side: 5 av 141

6 00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS Instrumentering for å brukes i forbindelse med ikke-aktive kirurgiske implantater - Generelle krav Instrumentation to be used in association with non-active surgical implants - General requirements Kommentarfrist: ISO/IEC DIS Information technology - Security techniques - Key management - Part 3: Mechanisms using asymmetric techniques Kommentarfrist: Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren rev Trykkpåkjent utstyr - Del 1: Terminologi Pressure equipment - Part 1: Vocabulary Kommentarfrist: pren Feiemaskiner - Del 4: Symboler for kontrollpaneler og andre skjermer Sweepers - Part 4: Symbols for operator controls and other displays Kommentarfrist: pren Lær - Terminologi - Sentrale definisjoner i lærbransjen Leather - Terminology - Key definitions for the leather trade Kommentarfrist: pren ISO Geosynthetics - Part 1: Terms and definitions (ISO/DIS :2013) Kommentarfrist: pren ISO Geosynthetics - Part 2: Symbols and Pictograms (ISO/DIS :2013) Kommentarfrist: pren ISO Jordkvalitet - Terminologi (ISO/DIS 11074:2013) Soil quality - Vocabulary (ISO/DIS 11074:2013) Kommentarfrist: pren ISO Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: Listenummer: 11/2013 Side: 6 av 141

7 01 Generelt. Terminologi. Standardisering. Dokumentasjon pren ISO Oversettelsestjenester - Krav til oversettelsestjenester (ISO/DIS 17100:2013) Translation Services - Requirements for translation services (ISO/DIS 17100:2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Technical product documentation -- Indication of dimensions and tolerances -- Part 2: Dimensioning of mechanical engineering drawings Kommentarfrist: ISO/DIS 1660 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Profile tolerancing Kommentarfrist: ISO/DIS Geosynthetics -- Part 1: Terms and definitions Kommentarfrist: ISO/DIS Geosynthetics -- Part 2: Symbols and Pictograms Kommentarfrist: ISO/DIS Jordkvalitet - Terminologi Soil quality -- Vocabulary Kommentarfrist: ISO/DIS Soil quality -- Vocabulary Kommentarfrist: ISO/DIS Machinery for forestry - Forwarders - Terminology and specifications Kommentarfrist: ISO/DIS Translation Services -- Requirements for translation services Kommentarfrist: ISO/DIS Water safety signs and beach safety flags -- Part 3: Guidance for use Kommentarfrist: Listenummer: 11/2013 Side: 7 av 141

8 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO-standarder ISO :2007/Amd 1:2013 ISO 21485:2013 Textile machinery -- Draw frame for cotton spinning -- Vocabulary and principles of construction Erstatter A00008:20: ISO 27729:2012/Cor 1:2013 Rapporter fra CEN (CR) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Fastsatte norske standarder NS-EN :2013 Intelligente transportsystemer - Systemer for gjenfinning av stjålne kjøretøyer - Del 1: Referansearkitektur og terminologi Intelligent transport systems - After-theft systems for the recovery of stolen vehicles - Part 1: Reference architecture and terminology NS-EN ISO 10579:2013 Geometriske produktspesifikasjoner (GPS) - Dimensjoner og toleranser - Ikke-stive deler (ISO 10579:2010 innbefattet Cor 1:2011) Geometrical product specifications (GPS) - Dimensioning and tolerancing - Non-rigid parts (ISO 10579:2010 including Cor 1:2011) NS-ISO :2012 Hydraulikk og pneumatikk - Tegningssymboler og koplingsskjemaer - Del 1: Tegningssymboler for vanlige og datatekniske anvendelser Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols for conventional use and data-processing applications NS-ISO :2012 Hydraulikk og pneumatikk - Tegningssymboler og koplingsskjemaer - Del 2: Koplingsskjemaer Fluid power systems and components - Graphical symbols and circuit diagrams - Part 2: Circuit diagrams Tilbaketrukne norske standarder NS-ISO :2006 Hydraulikk og pneumatikk - Tegningssymboler og koplingsskjemaer - Del 1: Tegningssymboler for vanlige og datatekniske anvendelser Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications Listenummer: 11/2013 Side: 8 av 141

9 01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO :1995 Hydraulikk og pneumatikk - Tegningssymboler og koplingsskjemaer - Del 2: Koplingsskjemaer - (ISO :1995) Fluid power systems and components - Graphic symbols and circuit diagrams - Part 2: Circuit diagrams (ISO :1995) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Pest management services - Requirements and competences Kommentarfrist: pren Maintenance - Maintenance within physical asset management Kommentarfrist: pren Packaging - Tamper verification features for medicinal product packaging Kommentarfrist: pren ISO Elektronisk avgiftsinnkreving (EFC) - Informasjonsutveksling mellom tjenesteleveranse og avgiftsinnkreving (ISO/DIS 12855:2013) Electronic fee collection - Information exchange between service provision and toll charging (ISO/DIS 12855:2013) Kommentarfrist: pren ISO Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 9362 Banking -- Banking telecommunication messages -- Business identifier code (BIC) Kommentarfrist: ISO/DIS Electronic fee collection -- Information exchange between service provision and toll charging Kommentarfrist: ISO/DIS Electronic fee collection -- Information exchange between service provision and toll charging Kommentarfrist: ISO/DIS Data Exchange involving roadside modules communication -- Part 2: Centre to Field Device Communication Kommentarfrist: Listenummer: 11/2013 Side: 9 av 141

10 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Intelligent transport systems - Public transport user information -- Part 1: Standards framework for public information systems Kommentarfrist: ISO/DIS Electronic fee collection -- Application interface definition for autonomous systems -- Part 1: Charging Kommentarfrist: ISO/DIS Quality management systems -- Particular requirements for the application of ISO 9001:2008 for electoral organizations at all levels of government Kommentarfrist: ISO/DIS Thalassotherapy -- Service requirements Kommentarfrist: ISO/DIS Non-destructive testing -- Evaluation of vision acuity of NDT personnel Kommentarfrist: ISO/DIS Societal security -- Mass evacuation -- Guidelines for planning Kommentarfrist: ISO/DIS Societal security -- Guidelines for establishing partnering arrangements Kommentarfrist: ISO/DIS Statistical methods in process management -- Capability and performance -- Part 1: General principles and concepts Kommentarfrist: ISO/DIS Activities relating to drinking water and wastewater services -- Crisis management of water utilities Kommentarfrist: ISO-standarder ISO :2013 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Erstatter A00008:20: ISO :2013 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Erstatter A00008:20:039293,A00008:20: Listenummer: 11/2013 Side: 10 av 141

11 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO 18878:2013 Mobile elevating work platforms -- Operator (driver) training Erstatter A00008:20: ISO :2013 Statistical methods in process management -- Capability and performance -- Part 2: Process capability and performance of timedependent process models Erstatter A00008:20: ISO/TR 21102:2013 Adventure tourism -- Leaders -- Personnel competence ISO/TR :2013 Public transport -- Interoperable fare management system -- Part 2: Business practices Erstatter A00008:20: ISO/TS :2013 Intelligent transport systems --- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 6: Regulated applications ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 8: Vehicle access monitoring (VAM) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 11: Driver work records (work and rest hours compliance) (DWR) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 12: Vehicle mass monitoring (VMM) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 14: Vehicle access control (VAC) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 15: Vehicle location monitoring (VLM) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 16: Vehicle speed monitoring (VSM) ISO/TS :2013 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 17: Consignment and location monitoring (CLM) Listenummer: 11/2013 Side: 11 av 141

12 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Rapporter fra CEN (CR) CEN ISO/TS 25110:2013 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013) Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR :2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TR ISO :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS :2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS 13141:2010/AC:2013 Electronic fee collection - Localisation augmentation communication for autonomous systems - Technical Corrigendum 1 (ISO/TS 13141:2010/Cor 1:2013) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TDS :2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2011) Listenummer: 11/2013 Side: 12 av 141

13 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TDS :2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 1: Test suite structure and test purposes (ISO/TS :2011) CEN ISO/TS :2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS Part 2: Abstract test suite (ISO/TS :2012) CEN ISO/TS :2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS :2012) CEN ISO/TS :2010/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2013) CEN ISO/TS :2011/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS :2011/Cor 1:2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS :2013) CEN/TR :2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete Listenummer: 11/2013 Side: 13 av 141

14 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing CEN/TS :2013 Innovation Management - Part 1: Innovation Management System Fastsatte norske standarder NS-EN :2013 Utstyr for sikker signaturgenerering - Del 2: Utstyr med nøkkelgenerering Protection profiles for secure signature creation device - Part 2: Device with key generation Listenummer: 11/2013 Side: 14 av 141

15 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport NS-ISO 10377:2013 Sikkerhet ved forbrukerprodukter - Retningslinjer for leverandører Consumer product safety - Guidelines for suppliers NS-ISO 10393:2013 Tilbakekalling av forbrukerprodukter - Retningslinjer for leverandører Consumer product recall - Guidelines for suppliers 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO Cosmetics - Microbiological limits Kommentarfrist: Rapporter fra CEN (CR) CEN ISO/TS :2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2011) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS :2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS :2012) CEN ISO/TS :2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 1: Metode for kvantitative bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 1: Method for quantification (ISO/TS :2013, Corrected Version ) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 2: Metode for kvalitativ bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 2: Method for qualitative detection (ISO/TS :2013, Corrected Version ) Listenummer: 11/2013 Side: 15 av 141

16 07 Matematikk. Naturvitenskap CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TS :2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment CEN/TS :2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Fastsatte norske standarder NS-EN ISO 20743:2013 Tekstiler - Bestemmelse av antibakteriell aktivitet på tekstilprodukter (ISO 20743:2013) Textiles - Determination of antibacterial activity of textile products (ISO 20743:2013) Tilbaketrukne norske standarder NS-EN ISO 20743:2007 Tekstiler - Bestemmelse av antibakteriell aktivitet i antibakterielt behandlede produkter (ISO 20743:2007) Textiles - Determination of antibacterial activity of antibacterial finished products (ISO 20743:2007) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) pren Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties Kommentarfrist: Listenummer: 11/2013 Side: 16 av 141

17 11 Helsevesen, Teknikk pren Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation Kommentarfrist: pren Kjemiske desinfeksjonsmidler og antiseptika - Kirurgiske hånddesinfeksjonsmidler - Prøvingsmetode og krav (fase 2/trinn 2) Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: pren Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of bactericidal and yeasticidal activity on nonporous surfaces with mechanical action employing wipes in the medical area (4- field test) - Test method and requirements (phase 2, step 2) Kommentarfrist: pren Chemical disinfectants and antiseptics - Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: pren Packaging - Tamper verification features for medicinal product packaging Kommentarfrist: pren ISO Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Han- og hunkoner (ISO/DIS :2012) Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO/DIS :2012) Kommentarfrist: pren ISO 6872 Tannpleie - keramiske materialer (ISO/DIS 6872:2013) Dentistry - Ceramic materials (ISO/DIS 6872:2013) Kommentarfrist: pren ISO Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO/DIS :2013) Kommentarfrist: pren ISO 9680 Tannpleie - Arbeidslamper for tannbehandling (ISO/DIS 9680:2013) Dentistry - Operating lights (ISO/DIS 9680:2013) Kommentarfrist: pren ISO rev Sterilt engangsutstyr til bruk ved innføring av kardiovaskulære katetre (ISO/DIS 11070:2013) Sterile, single-use intravascular catheter introducers (ISO/DIS 11070:2013) Kommentarfrist: Listenummer: 11/2013 Side: 17 av 141

18 11 Helsevesen, Teknikk pren ISO Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO/DIS 13116:2013) Kommentarfrist: pren ISO rev Tannpleie - Metalltråder til bruk i kjeveortopedisk materiale (ISO 15841:2013) Dentistry - Wires for use in orthodontics (ISO/DIS 15841:2013) Kommentarfrist: pren ISO Instrumentation for use in association with non-active surgical implants - General requirements (ISO/DIS 16061:2013) Kommentarfrist: pren ISO Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: pren ISO Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: pren ISO/IEC Forbindelsesstykker for væsker og gasser til medisinsk bruk - Del 7: Forbindelsesstykker med 6% (Luer) stigning for intravaskulære eller hypodermiske applikasjoner Small bore connectors for liquids and gases in healthcare applications - Part 7: Connectors with 6% (Luer) taper for intravascular or hypodermic applications (ISO/IEC/DIS ) Kommentarfrist: pren ISO/IEC Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO/IEC/DIS :2013) Kommentarfrist: pren ISO/IEC Small-bore connectors for liquids and gases in healthcare applications - Part 20: Common test methods (ISO/DIS :2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS Anaesthetic and respiratory equipment -- Conical connectors -- Part 1: Cones and sockets Kommentarfrist: ISO/DIS Implants for surgery - Cardiac pacemakers - Part 2: Reporting of clinical performance of populations of pulse generators or leads [Revision of first edition (ISO :1986)] Kommentarfrist: Listenummer: 11/2013 Side: 18 av 141

19 11 Helsevesen, Teknikk ISO/DIS 6872 Dentistry -- Ceramic materials Kommentarfrist: ISO/DIS Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum Kommentarfrist: ISO/DIS Infusjonsutstyr til medisinsk bruk - Del 8: Slangesett for bruk med trykkinfusjonsutstyr Infusion equipment for medical use -- Part 8: Infusion sets for use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 8: Infusion equipment for single use with pressure infusion apparatus Kommentarfrist: ISO/DIS Infusjonsutstyr til medisinsk bruk - Del 9: Flytende linjer for bruk med trykkinfusjonsutstyr Infusion equipment for medical use -- Part 9: Fluid lines for use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 9: Fluid lines for single use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusjonsutstyr til medisinsk bruk - Del 10: Tilbehør til flytende linjer for bruk med trykkinfusjonsutstyr Infusion equipment for medical use -- Part 10: Accessories for fluid lines for use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 10: Accessories for fluid lines for single use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusjonsutstyr til medisinsk bruk - Del 11: Infusjonsfiltre for bruk sammen med pressinfusjonsutstyr Infusion equipment for medical use -- Part 11: Infusion filters for use with pressure infusion equipment Kommentarfrist: ISO/DIS Infusion equipment for medical use -- Part 11: Infusion filters for single use with pressure infusion equipment Kommentarfrist: ISO/DIS 9680 Tannpleie - arbeidslampe for tannbehandling Dentistry -- Dental operating light Kommentarfrist: Listenummer: 11/2013 Side: 19 av 141

20 11 Helsevesen, Teknikk ISO/DIS 9680 Dentistry -- Operating lights Kommentarfrist: ISO/DIS Prefilled syringes -- Part 4: Glass barrels for injectables and sterilized subassembled syringes ready for filling Kommentarfrist: ISO/DIS Prefilled syringes -- Part 7: Packaging systems for sterilized subassembled syringes ready for filling Kommentarfrist: ISO/DIS Sterile single-use intravascular catheter introducers Kommentarfrist: ISO/DIS Dentistry -- Test Method for Determining Radio-Opacity of Materials Kommentarfrist: ISO/DIS Tannpleie - Kjeveortopedisk materiale - Metalltråd Dentistry -- Orthodontic materials -- Wires Kommentarfrist: ISO/DIS Dentistry -- Wires for use in orthodontics Kommentarfrist: ISO/DIS Instrumentering for bruk i forbindelse med ikke-aktive kirurgiske implantater - Generelle krav Instrumentation for use in association with non-active surgical implants -- General requirements Kommentarfrist: ISO/DIS Small-bore connectors for liquids and gases in healthcare applications -- Part 3: Connectors for enteral applications Kommentarfrist: ISO/DIS Small bore connectors for liquids and gases in healthcare applications -- Part 7: Connectors with 6% (Luer) taper for intravascular or hypodermic applications Kommentarfrist: ISO/DIS Small-bore connectors for liquids and gases in healthcare applications -- Part 20: Common test methods Kommentarfrist: Listenummer: 11/2013 Side: 20 av 141

21 11 Helsevesen, Teknikk ISO/DIS Medical electrical equipment -- Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients Kommentarfrist: ISO-standarder ISO :2012/Cor 1:2013 Rapporter fra CEN (CR) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Fastsatte norske standarder NS-EN ISO :2013 Myke plastbeholdere for humant blod og blodkomponenter - Del 1: Vanlige beholdere (ISO :2013) Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO :2013) NS-EN ISO 7405:2008/A1:2013 Endringsblad A1 - Tannpleie - Evaluering av biokompatibilitet av medisinsk utstyr brukt ved tannpleie - Endringsblad 1: Positivt kontrollmateriale (ISO 7405:2008/Amd 1:2013) Amendment A1 - Dentistry - Evaluation of biocompatibility of medical devices used in dentistry - Amendment 1: Positive control material (ISO 7405:2008/Amd 1:2013) NS-EN ISO :2013 Intravaskulære katetre - Sterile og til engangsbruk - Del 1: Generelle krav (ISO :2013, korrigert versjon ) Intravascular catheters - Sterile and single-use catheters - Part 1: General requirements (ISO :2013, Corrected version ) NS-EN ISO :2013 Intravaskulære katetre - Sterile og til engangsbruk - Del 3: Sentrale venekatetre (ISO :2013) Intravascular catheters - Sterile and single-use catheters - Part 3: Central venous catheters (ISO :2013) NS-EN ISO :2013 Intravaskulære katetre - Sterile og til engangsbruk - Del 4: Ballongdilatasjonskatetre (ISO :2013) Intravascular catheters - Sterile and single-use catheters - Part 4: Balloon dilatation catheters (ISO :2013) NS-EN ISO :2013 Intravaskulære katetre - Sterile og til engangsbruk - Del 5: Nålkatetre til perifer bruk (ISO :2013) Intravascular catheters - Sterile and single-use catheters - Part 5: Over-needle peripheral catheters (ISO :2013) Listenummer: 11/2013 Side: 21 av 141

22 11 Helsevesen, Teknikk NS-EN ISO :2006/A1:2013 Endringsblad A1 - Sterilisering av helsetjenesteprodukter - Stråling - Del 1: Krav til utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO :2006/Amd 1:2013) Amendment A1 - Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO :2006/Amd 1:2013) NS-EN ISO :2013 Sterilisering av helsetjenesteprodukter - Stråling - Del 2: Bestemmelse av steriliseringsdose (ISO :2013) Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO :2013) NS-EN ISO 16498:2013 Tannpleie - Minimumsopplysninger om tannimplantat for klinisk bruk (ISO 16498:2013) Dentistry - Minimal dental implant data set for clinical use (ISO 16498:2013) NS-EN ISO 29022:2013 Tannpleie - Adhesjon - Skjærprøving av heftfasthet på kanter med skår (ISO 29022:2013) Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013) Tilbaketrukne norske standarder NS 3370:1998 Helsevesen - Operasjonsbenklær Health service - Operating theatre trousers Språk: no NS-EN ISO :2003 Myke plastbeholdere for humant blod og blodkomponenter - Del 1: Vanlige beholdere (ISO :2003) Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO :2003) NS-EN ISO :2009 Sterile intravaskulære katetre til engangsbruk - Del 1: Generelle krav (ISO :1995, innbefattet Amd 1:1999 og Amd 2:2004) Sterile, single-use intravascular catheters - Part 1: General requirements (ISO :1995, including Amd 1:1999 and Amd 2:2004) NS-EN ISO :1997 Sterile intravaskulære katetre til engangs bruk - Del 3: Sentralvenøse katetre (ISO :1996) (innbefattet rettelsesblad AC:2002) Sterile, single use intravascular catheters - Part 3: Central venous catheters (ISO :1996) (Corrigendum AC:2002 incorporated) NS-EN ISO :1997 Sterile intravaskulære katetre til engangs bruk - Del 4: Ballongdilatasjonskatetre (ISO :1996) (innbefattet rettelsesblad AC:2002) Sterile, single use intravascular catheters - Part 4: Balloon dilatation catheters (ISO :1996) (Corrigendum AC:2002 incorporated) Listenummer: 11/2013 Side: 22 av 141

23 11 Helsevesen, Teknikk NS-EN ISO :1997 Sterile intravaskulære katetre til engangs bruk - Del 5: Nålkatetre til perifer bruk (ISO :1996) (innbefattet rettelsesblad AC:2002) Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters (ISO :1996) (Corrigendum AC:2002 incorporated) NS-EN ISO :1997/A1:2000 Endringsblad A1 - Sterile intravaskulære katetre til engangs bruk - Del 5: Nålkatetre til perifer bruk (ISO :1996/AM:1999) Amendment A1 - Sterile, single-use intravascular catheters - Part 5: Over-needle peripheral catheters (ISO :1996/AM:1999) NS-EN ISO :2012 Sterilisering av helsetjenesteprodukter - Stråling - Del 2: Bestemmelse av steriliseringsdose (ISO :2012) Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO :2012) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO :2008/prA1 Endringsblad A1 - Maskinsikkerhet - Sikkerhetsrelaterte deler i styresystemer - Del 1: Hovedprinsipper for konstruksjon (ISO :2006/DAM 1:2013) Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO :2006/DAM 1:2013) Kommentarfrist: pren Vernehansker mot kjemikalier og mikroorganismer - Del 2: Bestemmelse av motstand mot gjennomtrengning Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration Kommentarfrist: pren Vernetøy mot radioaktiv forurensning - Del 1: Krav og prøvingsmetode for ventilert vernetøy mot partikulær radioaktiv forurensning Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination Kommentarfrist: pren Karakterisering av avfall - Prøving av utlekkingsegenskaper - Innvirkning fra ph på utlekking ved initial syre/basetilsetting Characterisation of waste - Leaching behaviour test - Influence of ph on leaching with initial acid/base addition Kommentarfrist: pren rev Ambient air -Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography Kommentarfrist: Listenummer: 11/2013 Side: 23 av 141

24 13 Miljøvern. Helsevern. Sikkerhet pren Karakterisering av avfall Prøving av utlekkingsegenskaper Påvirkning av ph på utlekking med kontinuerlig ph-kontroll Characterisation of waste - Leaching behaviour test - Influence of ph on leaching with continuous ph control Kommentarfrist: pren Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med periodisk fornyelse av utlekkingsvæske under fastsatte prøvingsbetingelser Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed conditions Kommentarfrist: pren Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking Kommentarfrist: pren Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks Kommentarfrist: pren Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterisation of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity Kommentarfrist: pren ISO Jordkvalitet - Terminologi (ISO/DIS 11074:2013) Soil quality - Vocabulary (ISO/DIS 11074:2013) Kommentarfrist: pren ISO Maskinsikkerhet - Vern - Generelle krav til konstruksjon og bygging av faste og bevegelige vern (ISO/DIS 14120:2013) Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards (ISO/DIS 14120:2013) Kommentarfrist: pren ISO Soil quality - Risk based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) (ISO/DIS :2013) Kommentarfrist: pren ISO Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) (ISO/DIS :2013) Kommentarfrist: Listenummer: 11/2013 Side: 24 av 141

25 13 Miljøvern. Helsevern. Sikkerhet pren ISO Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO/DIS 17628:2013) Kommentarfrist: pren ISO Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - General rules (ISO/DIS 18674:2013) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2006/DAmd 1 Kommentarfrist: ISO/DIS Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) Kommentarfrist: ISO/DIS Water quality -- Sampling -- Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling Kommentarfrist: ISO/DIS Fire detection and alarm systems -- Part 1: General and definitions Kommentarfrist: ISO/DIS Jordkvalitet - Terminologi Soil quality -- Vocabulary Kommentarfrist: ISO/DIS Soil quality -- Vocabulary Kommentarfrist: ISO/DIS Soil quality -- Effects of pollutants on earthworms -- Part 3: Guidance on the determination of effects in field situations Kommentarfrist: ISO/DIS Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards Kommentarfrist: ISO/DIS Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards Kommentarfrist: Listenummer: 11/2013 Side: 25 av 141

26 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Soil quality -- Risk based petroleum hydrocarbons -- Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) Kommentarfrist: ISO/DIS Soil quality -- Risk-based petroleum hydrocarbons -- Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) Kommentarfrist: ISO/DIS Radiation Protection -- Performance criteria for laboratories using the cytokinesis-blocked micronucleus assay in blood lymphocytes for biological dosimetry Kommentarfrist: ISO/DIS Ships and marine technology -- Marine environment protection -- Oil booms -- Part 1: Design requirements Kommentarfrist: ISO/DIS Ships and marine technology -- marine environment protection - Oil booms -- Part 2: Strength and performance requirements Kommentarfrist: ISO/DIS Reaction to fire tests -- Mass loss measurement Kommentarfrist: ISO/DIS Jordkvalitet - Ekstraksjon av sporstoffer ved bruk av fortynnet salpetersyre Soil quality -- Extraction of trace elements using dilute nitric acid Kommentarfrist: ISO/DIS Soil quality -- Estimation of abundance of selected microbial gene sequences by quantitative realtime PCR from DNA directly extracted from soil Kommentarfrist: ISO/DIS Geotechnical investigation and testing -- Geothermal testing -- Determination of thermal conductivity of soil and rock using a borehole heat exchanger Kommentarfrist: ISO/DIS Ships and marine technology -- Incinerator sizing and selection -- Guidelines Kommentarfrist: Listenummer: 11/2013 Side: 26 av 141