MCP-16RC, luftrenertårn

Størrelse: px

Begynne med side:

Download "MCP-16RC, luftrenertårn"

Hanne Enger
7 år siden
Visninger:

Kompakt filterkassett med pulsrengjøring MCP-16RC luftrensertårn er en kompakt filterkassett for desentralisert inneluftrengjøring der luftgjenoppretting er mulig.

1 Kompakt filterkassett med pulsrengjøring MCP-16RC luftrensertårn er en kompakt filterkassett for desentralisert inneluftrengjøring der luftgjenoppretting er mulig. Den kompakte filterenheten leveres med innebygd vifte slik at skitten luft trekkes ut til kassetten for effektiv filtrering og deretter renses luften og returneres tilbake fra toppen av filteret. Filteret er laget av 2 mm (14 ga) galvaniserte og malte stålplater. Filterenheten leveres ferdigkablet og krever bare strømforsyning og trykkluftanlegg. Enkel mekanisk installasjon gjør at filterenheten plasseres på ønsket sted og deretter installeres i to enkle trinn. Filterkassettene er utformet etter den nyeste forskningen, og er patenterte. De er produsert av materialer som kan forbrennes. Filteret rengjøres automatisk med høy effektivitet, da en lite energikrevende trykkluftspuls rengjører systemet etter en impuls fra en elektronisk styreenhet. 60 munnstykker med 35 m kastelengde Tilgjengelig som W3-testet enhet iht. EN Produktnavn MCP-16RC, luftrenertårn Støynivå (db(a)) 70 ( 1m fra enheten, 1,6m høyde) Trykkluftsforbruk Clean & dry compressed air, 4,5 bar (65 psi), 24 V DC Trykkluftsforbruk Installasjon Materiale Rengjøringsmetode, filter Applications Arbeidstrykk (kpa) Volum, støvbeholver (L) 22 Nl/cleaning puls (0.8 cfm) 66 Nl/min at 20 s interval (2.4 cfm/min) 220 Nl/min after cleaning (7.8 cfm/min) Innendørs Galvanised and painted sheet metal Trykkluftrensing [fumes] Filterområdet (m2) 232 Kapasitet (maks. luftstrøm m3/t) Negativt trykk max 6 kpa 50 l with wheels (13 gal.) or 37 with wheels and bin balancing Operating Temperature -20 C to 70 C ( -4 F to 158 F ) Spenning (V) 400 Frekvens Hz 50 Antall faser 3 Filtertype Antall filterelementer 16 Kassettfilter Filtermateriale CA 175 Styrespenning (V) Vekt (kg) 1250 Kraft (kw) V AC Hz 1 9/23/2017

2 Fumes 2 9/23/2017

3 Bilde Navn på datablad Model MCP-16RC, Air Purification Tower, electrical cabinet on left filter side. Dust bin: 50 l. Fan: F63-R355 (10,0 kw) MCP-16RC, Air Purification Tower, electrical cabinet on right filter side. Dust bin: 50 l. Fan: F63-R355 (10,0 kw) MCP-16RC, Air Purification Tower, electrical cabinet on left filter side and W3 certificated. Dust bin: 37 l with bin balancing. Fan: F63-R355 (10,0 kw) MCP-16RC, Air Purification Tower, electrical cabinet on right filter side and W3 certificated. Dust bin: 37 l with bin balancing. Fan: F63-R355 (10,0 kw) /23/2017

Tilbehør Artikkelnummer Pressure switch for compressed air Protects the filter from damage during use without compressed air. Must not be placed in explosion risk areas.

Should be installed in the compressed air line. Must be positioned in a frost free environment.

piece set can be clamped with QF connection between the dual silencer and the outblow for allowing a higher outblow position.

and 2400 mm (94.5 inch). Lifiting device for fork lift (Outblow and Dual Silencer) Lifting device (set, 2 pieces) for Outblow and Dual Silencer for lifting them on top of the filter.

4 Tilbehør Artikkelnummer Pressure switch for compressed air Protects the filter from damage during use without compressed air. Must not be placed in explosion risk areas. Filter regulator Is used for setting the correct compressed air pressure. Separates dust, oil and water in the compressed air and protecting the valves. Should be installed in the compressed air line. Must be positioned in a frost free environment Level indicator for dust bin Capacitive level sensor for detection of full dust bin. Connected to the controller a warning will be shown when the dust bin is full. Plastic bag set (5 pcs., only for dust bins with bin balancing) Plastic bags that are placed inside the dust bin for easier handling of the dust, required at W3 Duct piece for Ø710 (28 inch) This adjustable duct piece set can be clamped with QF connection between the dual silencer and the outblow for allowing a higher outblow position. The duct length can be adjusted between 1400 mm (55 inch) and 2400 mm (94.5 inch). Lifiting device for fork lift (Outblow and Dual Silencer) Lifting device (set, 2 pieces) for Outblow and Dual Silencer for lifting them on top of the filter. This accessory should be used if there is no crane on site or a crane without necessary height. Please take care of the given dimensions for the fork lift Timer-Function Is used for setting the working hours of the filter according customer needs. The filters starts and stops automatically according the settled working hours. The timer is integrated into the electrical cabinet when ordered with the filter incl. a selection switch. (Can only be ordered with a complete MCP-16RC.) 4 m connection cable set with CEE plug (pre-mounted) Pre-mounted CEE plug 32A with 4 m connection cable at the electrical cabinet. (Can only be ordered with a complete MCP-16RC) /23/2017

5 The electrical cabinet can be placed on left or right filter side. Note: The filter must be placed in such a way that there is always free access to the electrical cabinet, because the emergency stop is placed on the front door of the electrical cabinet. The inspection door on the back site of the filter must be able to reach for service /23/2017

Like dokumenter

FMC filterkassett. Compact cartridge filter for solving dust problems within a wide range of industries

FMC filterkassett. Compact cartridge filter for solving dust problems within a wide range of industries Compact cartridge filter for solving dust problems within a wide range of industries FMC filterserien tilbyr mange operative fordeler, takket være kompakt design og patentert UniClean - system. Den spesielle