Water terminals SYSDUCT HP. Ductable fan coil unit

Størrelse: px

Begynne med side:

Download "Water terminals SYSDUCT HP. Ductable fan coil unit"

Ådne Mathisen
8 år siden
Visninger:

1 Water terminals SYSDUCT HP Ductable fan coil unit

2 SYSDUCT HP Ductable fan coil unit The ductable air treatment units are available in 7 sizes. Units are extremely suitable for small centralized conditioning systems connected by a small ducting network. The small height of these units, make them the convenient solution for false ceiling installation. Structure Made of heavy gauge galvanised steel (1,5 mm) it is insulated in all parts in direct contact with the conditioned air. Insulated condensate tray made of galvanised steel, complete with drain plug for complete drainage. Air filter Filtering Polyester fabric enclosed within a metal frame to facilitate withdrawal and cleaning. Filtering rate of the standard model: EU3. Available with different filtering rate on request. Coil Coils are made of copper pipe expanded into aluminium fins. Copper headers with male fittings (GAS threads) and easily accessible air vents. In the standard version, the water connections are located on the left (looking at the air outlet). On request, the water connections can be placed on the right side of the unit. Ceiling-anchoring slots for easy fixing and levelling of the unit. Fan group Double-inlet centrifugal fans with statically and dynamically balanced horizontally-oriented aluminium impellers. Single-phase asynchronous electric motor with overload cutout. The motor with three speeds is directly coupled to the fans and cushioned with flexible mountings to ensure low noise. SYSDUCT HP Accessories Wide range of controllers Infrared remote Electronic thermostat with Electronic thermostat controller switch selectors for flush mounting Available accessories 2way or 3way valves with on/off or modulating actuators 9 air intake and supply plenum Section with fresh air louver Air filter, EU3 class Connecting flange Antivibrating joint Heating section with electric heater Straight air intake and supply plenum Intake and supply section with spigots 4 and 6 rows heat exchanger for cooling up to 61kW 9 air intake and supply plenum Antivibrating joint Straight air intake and supply plenum Intake and supply section with spigots Section with fresh air louver Heating section with electric heater ModBus or BacNet PC connection Aeraulic performances (2 pipe system) SYSDUCT HP 1 SYSDUCT HP 2 SYSDUCT HP 3 SYSDUCT HP 4 SYSDUCT HP 5 SYSDUCT HP 6 4R coil data SYSDUCT HP 7 4R coil data MAX db(a ) MAX )

The small height of these units, make them the convenient solution for false ceiling installation.

3 Technical data Technical data Model SYSDUCT HP (2 PIPE SYSTEM - STANDARD COIL) COOLING Inlet water temp.: 7 C water temp.: 12 C Inlet air temp.: 27 C d.b.-19 C w.b. HEATING Air temp.: 2 C Inlet water temp.: 5 C FURTHER DATA Model SYSDUCT HP (4 PIPE SYSTEM - STANDARD + AUXILIARY COIL) COOLING Inlet water temp.: 7 C water temp.: 12 C Inlet air temp.: 27 C d.b.-19 C w.b. HEATING Air temp.: 2 C Inlet water temp.: 7/6 C FURTHER DATA Total cooling Sensible cooling Total cooling Sensible cooling W max W med W min W max W med W min Water flow l/h max Water pressure drop kpa max 15,4 26,9 31, ,8 21,1 25,1 W max Heating W med W min Water flow l/h max Water pressure drop kpa max 2, ,6 19,6 m 3 /h max Air flow m 3 /h med m 3 /h min Pa max ESP Pa med Pa min W max W med W min W max W med W min Water flow l/h max Water pressure drop kpa max 15,3 26,9 31,4 27, ,7 29,3 W max Heating W med W min Water flow l/h max Water pressure drop kpa max 13 22,6 26,1 23, ,6 23,8 Electric heater W A m 3 /h max Air flow m 3 /h med m 3 /h min Pa max ESP Pa med Pa min db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min Power input W W Absorbet current A A,72,97 1,43 1,51 2,58 5,86 11,54 Water content L L 1,36 2,18 2,63 3,25 3,79 9,38 14,44 db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min db(a) max db(a) med db(a) min Power input W max Absorbet current A max,72,97 1,43 1,51 2,58 5,86 11,54 Water content (cooling) L - 1,36 2,18 2,63 3,25 3,79 9,38 14,44 Water content (heating) L -,45,73,88 1,8 1,26 4,69 7,22 Minimum air pressure loss necessary to ensure the correct functioning of the units. Minimum air pressure loss Pa 6 6 MODEL Fans - Motors n Standard coil Auxiliary coil Rows n Fittings (ØAF) Ø 1/2 1/2 3/4 3/ /4 1 1/2 Rows n Fittings (ØAF) Ø 1/2 1/2 1/2 3/4 3/ /4 Condensate drain fitting (ØC) Ø mm External dimensions Height H mm Lenght L mm Depth* P mm Intake A mm Supply M mm * 39 * B mm C mm D mm E mm N. x Ø BAM mm 2xØ2 3xØ2 3xØ2 4xØ2 4xØ2 2xØ4 4xØ4 Net weight kg * On request: supply dimension as intake dimension. Dimensions B 51 L SYSDUCT HP SYSDUCT HP 6-7 B 51 L 7 77 A A Ø 2 Ø 2 P 29 P M 26 H 259 M 26 H

-19 C w.b. HEATING Air temp.: 2 C Inlet water temp.

4 REFTEC AS Våre folk Trondheim REFTEC AS Vi kan kulde/varmepumpe og klimaprodukter Andrè Benjamin Erik Henrik Reftec AS ble etablert i 27 og er en bedrift med hovedkontor i Trondheim og avdelingskontor i Oslo. Våre ansatte består av unge teknisk orienterte medarbeidere innenfor fagområdet kuldeteknikk og varmepumpesystemer. Våre kunder i det norske markedet strekker seg fra ventilasjon og kuldebransje til rørleggere og totalentreprenører. Jan Ivar Johnny Jon Bjarte Ketil De ansatte i bedriften innehar lang fartstid i faget, noe som har gitt oss et høyt kompetansenivå. Reftec AS skal med høy servicegrad og punktlighet gi miljøbevisste kunder optimale energiløsninger. I vårt produktspekter inngår energioptimale produkter som blant annet varmepumper, isvannsmaskiner, dataromskjølere, fancoils, industrielle terminal uniter og kondenseringsaggregater. Vi har produkter til konkurransedyktige priser fra store europeiske leverandører som Systemair, Chiller OY og Argo. Lars Petter Per Wenche Morten Visjon: Oslo Energioptimale løsninger i et fremtidsrettet miljøperspektiv. Thomas Ole-Johnny Linn Christine

Våre kunder i det norske markedet strekker seg fra ventilasjon og kuldebransje til rørleggere og totalentreprenører.

5 Reftec AS Tlf: post@reftec.no Trondheim: Vestre Rosten 85 Sigmasenteret 775 Tiller Oslo: Nordåsveien Oslo - Vi tenker miljø.

Like dokumenter

Product Facts. Product code example

Product Facts. Product code example ESAM Smoke control damper for multi Rectangular smoke control damper ESAM is specifically designed for use in multi fire compartment applications as a closing or as an opening damper for smoke extract