Annonseringsdato: 2012-03-28 Listenummer: 04/2012 Standardiseringsprosjekter og nye standarder Listenummer: 04/2012 Side: 1 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren 15380-5 Railway applications - Classification system for rail vehicles - Part 5: Systems; System groups - System requirements Kommentarfrist: 17.04.2012 pren ISO 1891-2 Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO/DIS 1891-2:2012) Kommentarfrist: 02.07.2012 Standardforslag til høring - internasjonale (ISO) ISO/DGuide 78 Safety of machinery -- Rules for drafting and presentation of safety standards Kommentarfrist: 28.06.2012 ISO/DGuide 78 Safety of machinery -- Rules for drafting and presentation of safety standards Kommentarfrist: 26.07.2012 ISO/DIS 6747 Earth-moving machinery - Tractor-dozers - Terminology and commercial specifications (Revision of second edition (ISO 6747:1988)) Kommentarfrist: 24.06.2012 ISO/DIS 7583 Anodizing of aluminium and its alloys -- Terms and definitions Kommentarfrist: 20.07.2012 ISO/DIS 9186-1 Grafiske symboler for offentlig informasjon Prøvingsmetode - Del 1:Metode for prøving av forstålighet Graphical symbols for public information -- Test methods -- Part 1: Methods for testing comprehensibility Kommentarfrist: 14.08.2012 ISO/DIS 25964-2 Information and documentation -- Thesauri and interoperability with other vocabularies -- Part 2: Interoperability with other vocabularies Kommentarfrist: 07.05.2012 ISO/DIS 26824 Particle characterization of particulate systems -- Vocabulary Kommentarfrist: 29.06.2012 Listenummer: 04/2012 Side: 2 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO-standarder ISO 7000:2012 Graphical symbols for use on equipment -- Registered symbols Erstatter A00008:20:035627 ISO 12231:2012 Photography -- Electronic still picture imaging -- Vocabulary Erstatter A00008:20:036062 ISO 23953-1:2005/Amd 1:2012 ISO 27185:2012 Cardiac rhythm management devices -- Symbols to be used with cardiac rhythm management device labels, and information to be supplied -- General requirements ISO 27729:2012 Information and documentation -- International standard name identifier (ISNI) ISO/TR 4378-6:2012 Plain bearings -- Terms, definitions, classification and symbols -- Part 6: Abbreviated terms Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics CEN/TR 16015:2010 Beslag for møbler - Termer for låsemekanismer Hardware for furniture - Terms for locking mechanisms CEN/TS 15989:2010 Kjøretøy og annet utstyr for brannbekjempelse - Symboler til bruk på kontrollpaneler og lignende Firefighting vehicles and equipment - Symbols for operator controls and other displays Fastsatte norske standarder NS-EN 1540:2011 Arbeidsplassluft - Terminologi Workplace exposure - Terminology Listenummer: 04/2012 Side: 3 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 16018:2011 Ikke-destruktiv prøving - Terminologi - Termer brukt i ultralydprøving med faseforskjøvede oppstillinger Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays NS-EN ISO 25239-1:2011 Friksjonssveising - Aluminium - Del 1: Terminologi (ISO 25239-1:2011) Friction stir welding - Aluminium - Part 1: Vocabulary (ISO 25239-1:2011) NS-ISO 3833:1977 Veikjøretøyer - Typer - Termer og definisjoner Road vehicles - Types - Terms and definitions NS-ISO 17724:2003 Grafiske symboler - Ordliste Graphical symbols - Vocabulary NS-ISO 17724:2003 Grafiske symboler - Ordliste Graphical symbols - Vocabulary Språk: no NS-ISO 80000-1:2009 Størrelser og enheter - Del 1: Generelt Quantities and units - Part 1: General NS-ISO 80000-1:2009/AC:2011 Rettelsesblad AC - Størrelser og enheter - Del 1: Generelt Corrigendum AC - Quantities and units - Part 1: General NS-ISO 80000-2:2009 Størrelser og enheter - Del 2: Matematiske tegn og symboler for bruk i naturvitenskap og teknologi Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology NS-ISO 80000-3:2006 Størrelser og enheter - Del 3: Rom og tid Quantities and units - Part 3: Space and time NS-ISO 80000-4:2006 Størrelser og enheter - Del 4: Mekanikk Quantities and units - Part 4: Mechanics NS-ISO 80000-5:2007 Størrelser og enheter - Del 5: Termodynamikk Quantities and units - Part 5: Thermodynamics Listenummer: 04/2012 Side: 4 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO 80000-7:2008 Størrelser og enheter - Del 7: Lys Quantities and units - Part 7: Light NS-ISO 80000-9:2009 Størrelser og enheter - Del 9: Fysikalsk kjemi og molekylfysikk Quantities and units - Part 9: Physical chemistry and molecular physics NS-ISO 80000-9:2009/A1:2011 Endringsblad A1 - Størrelser og enheter - Del 9: Fysikalsk kjemi og molekylfysikk Amendment A1 - Quantities and units - Part 9: Physical chemistry and molecular physics NS-ISO 80000-10:2009 Størrelser og enheter - Del 10: Atom- og kjernefysikk Quantities and units - Part 10: Atomic and nuclear physics NS-ISO 80000-11:2008 Størrelser og enheter - Del 11: Karakteriske tall Quantities and units - Part 11: Characteristic numbers NS-ISO 80000-12:2009 Størrelser og enheter - Del 12: Faststoff-fysikk Quantities and units - Part 12: Solid state physics Tilbaketrukne norske standarder NS-EN 1540:1998 Arbeidsplassluft - Terminologi Workplace atmospheres - Terminology NS-EN ISO 11593:1997 Styring av industriroboter - Automatisk vekselsystem for endebryter - Ordliste og presentasjon av egenskaper (ISO 11593:1996) Manipulating industrial robots - Automatic end effector exchange systems - Vocabulary and presentation of characteristics (ISO 11593:1996) NS-EN ISO 14539:2001 Styring av industriroboter - Objekthåndtering med griper av pinsett-type - Terminologi og presentasjon av egenskaper (ISO 14539:2000) Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics (ISO 14539:2000) NS-ISO 31-0:1992 Størrelser og enheter - Del 0: Generelle prinsipper Quantities and units - Part 0: General principles Språk: no Listenummer: 04/2012 Side: 5 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO 31-1:1992 Størrelser og enheter - Del 1:Rom og tid Quantities and units - Part 1: Space and time Språk: no NS-ISO 31-2:1992 Størrelser og enheter - Del 2: Periodiske og beslektede fenomener Quantities and units - Part 2: Periodic and related fenomena Språk: no NS-ISO 31-4:1992 Størrelser og enheter - Del 4: Varme Quantities and Units - Part 4: Heat Språk: no NS-ISO 31-6:1992 Størrelser og enheter - Del 6: Lys og beslektet elektromagnetisk stråling Quantities and units - Part 6: Light and related electromagnetic radiations Språk: no NS-ISO 31-8:1992 Størrelser og enheter - Del 8: Fysikalsk kjemi og molekylfysikk Quantities and units - Part 8: Physical chemistry and molecular physics Språk: no NS-ISO 31-9:1992 Størrelser og enheter - Del 9: Atom- og kjernefysikk Quantities and units - Part 9: Atomic and nuclear physics Språk: no NS-ISO 31-10:1992 Størrelser og enheter - Del 10: Kjernereaksjoner og ioniserende stråling Quantities and units - Part 10: Nuclear reactions and ionizing radiations Språk: no NS-ISO 31-11:1992 Størrelser og enheter - Del 11: Matematiske tegn og symboler for bruk i naturvitenskap og teknikk Quantities and units - Part 11: Mathematical signs and symbols for use in the physical sciences and technology Språk: no NS-ISO 31-12:1992 Størrelser og enheter - Del 12: Karakteristiske tall Quantities and units - Part 12: Characteristic numbers Språk: no NS-ISO 31-13:1992 Størrelser og enheter - Del 13: Faststoff-fysikk Quantities and units - Part 13: Solid state physics Språk: no Listenummer: 04/2012 Side: 6 av 128
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO 1000:1992 SI-enheter og anbefalinger for bruken av deres multipler og av visse andre enheter SI units and recommendations for the use of their multiples and certain other units Språk: no NS-ISO 8015:1985 Tekniske tegninger - Toleranser - Grunnleggende prinsipper for toleransesetting Technical drawings - Fundamental tolerancing principle Språk: no/en 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 16352 Logistics - Specifications for reporting crime incidents Kommentarfrist: 17.04.2012 pren 16372 Aesthetic surgery services Kommentarfrist: 15.05.2012 pren ISO 14732 rev Welding personnel - Qualification testing of welding operators for fully mechanized welding and weld setters for fully mechanized welding and automatic welding of metallic materials (ISO/DIS 14732:2012) Kommentarfrist: 15.05.2012 Standardforslag til høring - internasjonale (ISO) ISO/DIS 3951-1 Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL Kommentarfrist: 07.07.2012 ISO/DIS 3951-2 Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics Kommentarfrist: 07.07.2012 ISO/DIS 10383 Securities and related financial instruments -- Codes for exchanges and market identification (MIC) -- Kommentarfrist: 06.05.2012 ISO/DIS 10383 Securities and related financial instruments -- Codes for exchanges and market identification (MIC) Kommentarfrist: 04.05.2012 Listenummer: 04/2012 Side: 7 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 15623 Intelligent Transport Systems -- Forward vehicle collision warning systems -- Performance requirements and test procedures Kommentarfrist: 15.07.2012 ISO/DIS 15638-1 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 1: Framework and architecture Kommentarfrist: 04.04.2012 ISO/DIS 15638-3 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 3: Requirements, 'Certification authority' approval procedures, and enforcement provisions for the providers of reg Kommentarfrist: 09.08.2012 ISO/DIS 15638-5 Intelligent transport systems -- Framework for collaborative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 5: Generic vehicle information Kommentarfrist: 09.08.2012 ISO/DIS 22313 Societal security -- Business continuity management systems -- Guidance Kommentarfrist: 06.05.2012 ISO/DIS 22398 Societal security -- Guidelines for exercises and testing Kommentarfrist: 06.05.2012 ISO-standarder ISO 7870-3:2012 Control charts -- Part 3: Acceptance control charts Erstatter A00008:20:014943 ISO/TS 13140-2:2012 Electronic fee collection -- Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 -- Part 2: Abstract test suite ISO/TS 16401-1:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-2 -- Part 1: Test suite structure and test purposes ISO/TS 16401-2:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-2 -- Part 2: Abstract test suite ISO/TS 16403-1:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-4 -- Part 1: Test suite structure and test purposes Listenummer: 04/2012 Side: 8 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TS 16403-2:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-4 -- Part 2: Abstract test suite ISO/TS 16407-2:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-1 -- Part 2: Abstract test suite ISO/TS 16410-2:2012 Electronic fee collection -- Evaluation of equipment for conformity to ISO/TS 17575-3 -- Part 2: Abstract test suite Rapporter fra CEN (CR) CEN ISO/TS 13140-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) CEN ISO/TS 13143-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) CEN ISO/TS 13143-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 2: Abstract test suite (ISO/TS 13143-2:2011) CEN ISO/TS 16401-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) CEN ISO/TS 16401-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) CEN ISO/TS 16403-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) CEN ISO/TS 16403-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO/TS 16403-2:2012) Listenummer: 04/2012 Side: 9 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 16407-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TDS 16407-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) CEN ISO/TS 16407-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) CEN ISO/TS 16410-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TDS 16410-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) CEN ISO/TS 16410-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) CEN ISO/TS 17575-1:2010 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/TS 17575-1:2010) Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/TS 17575-1:2010) CEN ISO/TS 17575-2:2010 Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO/TS 17575-2:2010) CEN ISO/TS 17575-3:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) CEN ISO/TS 17575-4:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) CEN ISO/TS 18234-2:2006 Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF) (ISO/TS 18234-2:2006) CEN ISO/TS 18234-5:2006 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006) CEN ISO/TS 29001:2011 Petroleumsindustri, petrokjemisk industri og naturgassindustri - Sektorspesifikk system for kvalitetsstyring - Krav til produkt og service forsyningsorganisasjoner (ISO/DTS 29001:2010) Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010) Listenummer: 04/2012 Side: 10 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 14142-2:2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions CEN/TR 16040:2010 Electronic fee collection - Requirements for urban dedicated short-range communication Electronic fee collection - Requirements for urban dedicated short-range communication CEN/TR 16092:2011 Electronic fee collection - Requirements for pre-payment systems Electronic fee collection - Requirements for pre-payment systems CEN/TS 15121-1:2011 Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations CEN/TS 15121-2:2011 Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission CEN/TS 15844-1:2010 Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary CEN/TS 15844-2:2010 Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification CEN/TS 15844-3:2010 Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification CEN/TS 15844-4:2010 Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats CEN/TS 15844-5:2010 Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters CEN/TS 16118:2012 Omsorgsbolig - Krav for tjenester gitt til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme Listenummer: 04/2012 Side: 11 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems Fastsatte norske standarder NS 415-1:2007/A1:2012 Endringsblad A1 - Driftsinspektører - Del 1: Regler for eksaminering og sertifisering Amendment A1 - In-service inspectors - Part 1: Rules for examination and certification Språk: no NS-EN 15221-3:2011 Fasilitetsstyring (FM) - Del 3: Veiledning om kvalitet i fasilitetsstyring Facility Management - Part 3: Guidance on quality in Facility Management NS-EN 15221-4:2011 Fasilitetsstyring (FM) - Del 4: Rammeverk, klassifisering og strukturer i fasilitetsstyring Facility Management - Part 4: Taxonomy, Classification and Structures in Facility Management NS-EN 15221-5:2011 Fasilitetsstyring (FM) - Del 5: Veiledning i fasilitetsstyringsprosesser Facility Management - Part 5: Guidance on Facility Management processes NS-EN 15221-6:2011 Fasilitetsstyring (FM) - Del 6: Måling av arealer og volumer i fasilitetsstyring Facility Management - Part 6: Area and Space Measurement in Facility Management NS-EN ISO 19011:2011 Retningslinjer for revisjon av styringssystemer (ISO 19011:2011) Guidelines for auditing management systems (ISO 19011:2011) Språk: no/en NS-EN ISO 19011:2011 Retningslinjer for revisjon av styringssystemer (ISO 19011:2011) Guidelines for auditing management systems (ISO 19011:2011) NS-ISO/IEC 31010:2009 Risikostyring - Metoder for risikovurdering Risk management - Risk assessment techniques /fr Oversettelser av tidligere fastsatte norske standarder NS-ISO 26000:2010 Veiledning om samfunnsansvar Guidance on social responsibility Språk: no Listenummer: 04/2012 Side: 12 av 128
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Tilbaketrukne norske standarder NS-EN ISO 19011:2002 Retningslinjer for revisjon av systemer for kvalitets- og/eller miljøstyring (ISO 19011:2002) Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) Språk: no/en NS-EN ISO 19011:2002 Retningslinjer for revisjon av systemer for kvalitets- og/eller miljøstyring (ISO 19011:2002) Guidelines for quality and/or environmental management systems auditing (ISO 19011:2002) 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 4833-1 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for telling av mikroorganismer Del 1: Kolonitelling ved 30 C ved innstøpning (ISO/DIS 4833-1:2012) Microbiology of food and animal feed - Horizontal method for the enumeration of microorganisms - Part 1: Colony count at 30 degrees C by the pour plate technique (ISO/DIS 4833-1:2012) Kommentarfrist: 16.07.2012 pren ISO 4833-2 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for telling av mikroorganismer Del 2: Kolonitelling ved 30 C ved overflateutsæd (ISO/DIS 4833-2:2012) Microbiology of food and animal feed - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique (ISO/DIS 4833-2:2012) Kommentarfrist: 16.07.2012 Standardforslag til høring - internasjonale (ISO) ISO/DIS 4833-1 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for telling av mikroorganismer Del 1: Kolonitelling ved 30 C ved innstøpning Microbiology of food and animal feed -- Horizontal method for the enumeration of microorganisms -- Part 1: Colony count at 30 degrees C by the pour plate technique Kommentarfrist: 16.07.2012 ISO/DIS 4833-2 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for telling av mikroorganismer Del 2: Kolonitelling ved 30 C ved overflateutsæd Microbiology of food and animal feed -- Horizontal method for the enumeration of microorganisms -- Part 2: Colony count at 30 degrees C by the surface plating technique Kommentarfrist: 16.07.2012 CEN Workshop Agreements CWA 16393:2012 Laboratory biorisk management - Guidelines for the implementation of CWA 15793:2008 Listenummer: 04/2012 Side: 13 av 128
07 Matematikk. Naturvitenskap Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 22117:2010 Fôr- og næringsmiddelmikrobiologi - Spesifikke krav og retningslinjer for kvalifikasjonsprøving ved interlaboratorie sammenlikning (ISO/TS 22117:2010) Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010) CEN ISO/TS 10272-3:2010 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for bestemmelse og telling av Campylobacter ssp. - Del 3: Semi-kvantitativ bestemmelse (ISO/TS 10272-3:2010) Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method (ISO/TS 10272-3:2010) CEN ISO/TS 10272-3:2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 11133-2:2003/A1:2011 Fôr- og næringsmiddelmikrobiologi - Retningslinjer for produksjon av dyrkingsmedier - Del 2: Praktiske retningslinjer for kontroll av dyrkingsmedier - Endringsblad 1: Test mikroorganismer for vanlige dyrkningsmedier (ISO/TS 11133-2:2003/AMD 1:2011) Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media - Amendment 1: Test microorganisms for commonly used culture media (ISO/TS 11133-2:2003/AMD 1:2011) CEN ISO/TS 13830:2011 Veiledning om merking av produserte nano objekter og produkter som inneholder produserte nano objekter (ISO/TS 13830:2011) Guidance on the labelling of manufactured nano-objects and products containing manufactured nano-objects (ISO/TS 13830:2011) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures CEN/TR 16059:2010 Matanalyse Ytelseskriterier for enkelte laboratorie validerte metoder av analyse for bestemmelse av mykotoksiner Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins CEN/TS 15634-2:2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Listenummer: 04/2012 Side: 14 av 128
07 Matematikk. Naturvitenskap Fastsatte norske standarder NS-EN ISO 15927-5:2004/A1:2011 Endringsblad A1 - Bygningers hygrotermiske egenskaper - Beregning og presentasjon av klimadata - Del 5: Data for dimensjonerende effektbehov til romoppvarming (ISO 15927-5:2004/Amd 1:2011) Amendment A1 - Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 5: Data for design heat load for space heating (ISO 15927-5:2004/Amd 1:2011) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 7405:2008/prA1 Dentistry - Evaluation of biocompatibility of medical devices used in dentistry - Amendment 1 (ISO 7405:2008/DAM 1:2012) Kommentarfrist: 12.06.2012 EN ISO 8536-4:2010/prA1 Infusjonsutstyr til medisinsk bruk - Del 4: Infusjonsutstyr til engangsbruk med falltilførsel (ISO 8536-4:2010/DAM 1:2011) Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010/DAM 1:2011) Kommentarfrist: 15.05.2012 EN ISO 13397-2:2005/prA1 Dentistry - Periodontal curettes, dental scalers and excavators - Part 2: Periodontal curettes of Gr-type - Amendment 1: Colour coding (ISO 13397-2:2005/DAM 1:2011) Kommentarfrist: 17.04.2012 EN ISO 21536:2009/prA1 Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for kneleddsimplantater (ISO 21536:2007/DAmd 1:2012) Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants (ISO 21536:2007/DAmd 1:2012) Kommentarfrist: 01.08.2012 pren 1422 rev Sterilisatorer for medisinsk utstyr - Etylenoksidsterilisatorer - Krav og prøvingsmetoder Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods Kommentarfrist: 03.04.2012 pren 14476 rev Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of vuricidal activity of chemical disinfectants and antiseptics used in human medicine - Test method and requirements (phase 2, step 1) Kommentarfrist: 17.04.2012 pren 16372 Aesthetic surgery services Kommentarfrist: 15.05.2012 Listenummer: 04/2012 Side: 15 av 128
11 Helsevesen, Teknikk pren ISO 5367 Anaesthetic and respiratory equipment - Breathing sets and connectors (ISO/DIS 5367:2012) Kommentarfrist: 16.07.2012 pren ISO 6873 Dentistry - Gypsum products (ISO/DIS 6873:2011) Kommentarfrist: 10.04.2012 pren ISO 10079-2 Medical suction equipment - Part 2: Manually powered suction equipment (ISO/DIS 10079-2:2012) Kommentarfrist: 16.07.2012 pren ISO 10079-3 Medical suction equipment - Part 3: Suction equipment powered from a vacuum or positive pressure gas source (ISO/DIS 10079-3:2012) Kommentarfrist: 25.07.2012 pren ISO 29022 Dentistry - Adhesion - Notched-edge shear bond strength test (ISO/DIS 29022:2012) Kommentarfrist: 15.08.2012 pren ISO 80601-2-67 Medical electrical equipment - Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment (ISO/DIS 80601-2-67:2012) Kommentarfrist: 19.06.2012 Standardforslag til høring - internasjonale (ISO) ISO 7405:2008/DAmd 1 Kommentarfrist: 12.06.2012 ISO 8536-4:2010/DAmd 1 Kommentarfrist: 15.05.2012 ISO 8536-12:2007/DAmd 1 Kommentarfrist: 21.04.2012 ISO 13397-2:2005/DAmd 1 Colour coding Kommentarfrist: 17.04.2012 ISO/DIS 5367 Breathing tubes intended for use with anaesthetic apparatus and ventilators (Revision of second edition (ISO 5367:1991) Kommentarfrist: 16.07.2012 Listenummer: 04/2012 Side: 16 av 128
11 Helsevesen, Teknikk ISO/DIS 5838-1 Implants for surgery - Skeletal pins and wires - Part 1: Material and mechanical requirements - [Revision of first edition (ISO5838-1:1983)] Kommentarfrist: 14.04.2012 ISO/DIS 6873 Dental gypsum products Kommentarfrist: 10.04.2012 ISO/DIS 6873 Dentistry -- Gypsum products Kommentarfrist: 08.04.2012 ISO/DIS 7176-25 Wheelchairs -- Part 25: Batteries and chargers for powered wheelchairs - Requirements and test methods Kommentarfrist: 26.06.2012 ISO/DIS 10079-2 Medical suction equipment - Part 2: Manual powered suction equipment (Revision of ISO 10079-2:1992) Kommentarfrist: 16.07.2012 ISO/DIS 10079-3 Medical suction equipment - Part 3: Suction equipment powered from vacuum or pressure source [Revision of first edition (ISO 10079-3:1992)] Kommentarfrist: 25.07.2012 ISO/DIS 80601-2-67 Medical electrical equipment -- Part 2-67: Particular requirements for basic safety and essential performance of oxygen-conserving equipment Kommentarfrist: 19.06.2012 ISO/DIS 81060-2 Non-invasive sphygmomanometers -- Part 2: Clinical validation of automated measurement type Kommentarfrist: 25.04.2012 ISO/DIS 81060-2 Non-invasive sphygmomanometers -- Part 2: Clinical investigation of automated measurement type Kommentarfrist: 23.04.2012 ISO-standarder ISO 7199:2009/Amd 1:2012 Clarifications for test methodologies, labelling, and sampling schedule ISO 27185:2012 Cardiac rhythm management devices -- Symbols to be used with cardiac rhythm management device labels, and information to be supplied -- General requirements Listenummer: 04/2012 Side: 17 av 128
11 Helsevesen, Teknikk Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) Fastsatte norske standarder NS-EN ISO 5359:2008/A1:2011 Endringsblad A1 - Lavtrykks-slangekonstruksjoner for bruk med medisinske gasser (ISO 5359:2008/Amd 1:2011) Amendment A1 - Low-pressure hose assemblies for use with medical gases (ISO 5359:2008/Amd 1:2011) NS-EN ISO 6360-2:2004/A1:2011 Endringsblad A1 - Tannpleie - Nummerkodesystem for roterende instrumenter - Del 2: Former (ISO 6360-2:2004/Amd 1:2011) Amendment A1 - Dentistry - Number coding system for rotary instruments - Part 2: Shapes (ISO 6360-2:2004/Amd 1:2011) NS-EN ISO 8536-5:2011 Infusjonsutstyr til medisinsk bruk - Del 5: Burette-infusjonsutstyr til engangsbruk med falltilførsel (ISO 8536-5:2004) Infusion equipment for medical use - Part 5: Burette infusion sets for single use, gravity feed (ISO 8536-5:2004) NS-EN ISO 10685-1:2011 Oftalmisk optikk - Elektronisk katalog og identifikasjon for brilleinnfatninger og solbriller - Del 1: Produktidentifikasjon og -hierarki for elektroniske kataloger (ISO 10685-1:2011) Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 1: Product identification and electronic catalogue product hierarchy (ISO 10685-1:2011) NS-EN ISO 23640:2011 In vitro-diagnostisk medisinsk utstyr - Stabilitetsprøving av in vitro-diagnostiske reagenser (ISO 23640:2011) In vitro diagnostic medical devices - Evaluation of stability of in vitro diagnostic reagents (ISO 23640:2011) NS-EN ISO 25539-3:2011 Kardiovaskulære implantater - Endovaskulært utstyr - Del 3: Vena cava-filtre (ISO 25539-3:2011) Cardiovascular implants - Endovascular devices - Part 3: Vena cava filters (ISO 25539-3:2011) NS-EN ISO 80601-2-55:2011 Medisinsk elektrisk utstyr - Del 2-55: Spesielle krav til grunnleggende sikkerhet og avgjørende ytelse for overvåkingsutstyr for pustegass (ISO 80601-2-55:2011) Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2011) Tilbaketrukne norske standarder NS-EN 12006-3:1998+A1:2009 Ikke-aktive kirurgiske implantater - Særlige krav til hjerte- og blodåreimplantater - Del 3: Endovaskulært utstyr Non active surgical implants - Particular requirements for cardiac and vascular implants - Part 3: Endovascular devices Listenummer: 04/2012 Side: 18 av 128
11 Helsevesen, Teknikk NS-EN 13640:2002 Stabilitetsprøving av in vitro-diagnostiske reagenser Stability testing of in vitro diagnostic reagents NS-EN ISO 21647:2009 Medisinsk elektrisk utstyr - Særlige krav til grunnleggende sikkerhet og ytelse av overvåkingsutstyr for pustegass (ISO 21647:2004, inkludert Cor 1:2005) Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 21647:2004, including Cor 1:2005) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren 54-2 rev Brannalarmanlegg - Del 2: Kontroll- og signalutstyr Fire detection and fire alarm systems - Part 2: Control and indicating equipment Kommentarfrist: 25.06.2012 pren 54-10 rev Brannalarmanlegg - Del 10: Flammedetektorer - Punktdetektorer Fire detection and fire alarm systems - Part 10: Flame detectors - Point detectors Kommentarfrist: 05.06.2012 pren 374-4 Protective gloves against chemicals and micro-organisms - Part 4: Determination of resistance to degradation by chemicals Kommentarfrist: 01.08.2012 pren 943-1 rev Vernetøy mot faste, flytende og gassformige kjemikalier, innbefattet flytende aerosoler - Del 1: Funksjonskrav for ventilert og ikkeventilert gasstett (type 1) vernetøy Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) suits Kommentarfrist: 17.04.2012 pren 1143-2 Secure storage units - Requirements, classification and methods of tests for resistance to burglary - Part 2: Deposit systems Kommentarfrist: 02.07.2012 pren 1364-3 Prøving av brannmotstanden til ikke-bærende bygningsdeler - Del 3: Påhengsvegger (komplett sammenstilling) Fire resistance tests for non-loadbearing elements - Part 3: Curtain walling - Full configuration (complete assembly) Kommentarfrist: 03.04.2012 Listenummer: 04/2012 Side: 19 av 128
13 Miljøvern. Helsevern. Sikkerhet pren 1621-2 Motorcyclists' protective clothing against mechanical impact - Part 2: Motorcyclists' back protectors - Requirements and test methods Kommentarfrist: 01.08.2012 pren 12972 rev Tanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks Kommentarfrist: 15.08.2012 pren 13381-5 Prøvingsmetoder for å bestemme bidraget til lastbærende komponenters brannmotstand Del5 Påført beskyttelse av samvirkekomponenter av betong og stålprofiler Test methods for determining the contribution to the fire resistance of structural members - Part 5: Applied protection to concrete/profiled sheet steel composite members Kommentarfrist: 15.05.2012 pren 13501-6 Brannklassifisering av byggevarer og bygningsdeler - Del 6: Klassifisering av elektriske kabler basert på prøvning av brannpåvirkning Fire classification of construction products and building elements - Part 6: Classification using data from reaction to fire tests on electric cables Kommentarfrist: 03.04.2012 pren 13594 Protective gloves for professional motorcycle riders - Requirements and test methods Kommentarfrist: 01.08.2012 pren 13946 Water quality - Guidance for the routine sampling and pre-treatment of benthic diatoms from rivers and lakes Kommentarfrist: 25.06.2012 pren 14025 Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction Kommentarfrist: 01.05.2012 pren 14184 Vannundersøkelse - Veiledning for overvåking av akvatisk makrovegetasjon i rennende vann Water quality - Guidance for the surveying of aquatic macrophytes in running waters Kommentarfrist: 25.06.2012 pren 14407 Water quality - Guidance for the identification, enumeration and interpretation of benthic diatom samples from rivers and lakes Kommentarfrist: 25.06.2012 pren 14604 Røykvarslere Smoke alarm devices Kommentarfrist: 25.06.2012 Listenummer: 04/2012 Side: 20 av 128
13 Miljøvern. Helsevern. Sikkerhet pren 14742 Characterization of sludges - Laboratory chemical conditioning procedure Kommentarfrist: 16.07.2012 pren 16023 Karakterisering av avfall - Bestemmelse av brennverdi Characterization of waste - Determination of gross calorific value and calculation of net calorific value Kommentarfrist: 12.06.2012 pren 16023 Characterization of waste - Determination of gross calorific value and calculation of net calorific value Kommentarfrist: 12.06.2012 pren 16350 Vernehansker mot elektrostatiske risikoer Protective gloves for electrostatical risks Kommentarfrist: 03.04.2012 pren 16377 Characterization of waste - Determination of Brominated Flame Retardants (BFR) in Solid Waste Kommentarfrist: 12.06.2012 pren ISO 10819 Mekaniske vibrasjoner og støt - Hånd-arm-vibrasjoner - Metode for måling og vurdering av vibrasjonsoverføringen via hansker ved håndflaten Mechanical vibration and shock - Hand-arm vibration - Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand (ISO/DIS 10819:2011) Kommentarfrist: 03.04.2012 pren ISO 13137 Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO/DIS 13137:2012) Kommentarfrist: 01.08.2012 pren ISO 13856-2 Safety of machinery - Pressure-sensitive protective devices - Part 2: General principles for the design and testing of pressuresensitive edges and pressure-sensitive bars (ISO/DIS 13856-2:2011) Kommentarfrist: 03.04.2012 pren ISO 14031 rev Miljøstyring - Evaluering av miljøprestasjon - Retningslinjer (ISO/DIS 14031:2012) Environmental management - Environmental performance evaluation - Guidelines (ISO/DIS 14031:2012) Kommentarfrist: 05.06.2012 pren ISO 16665 Vannundersøkelse - Retningslinjer for kvantitativ prøvetaking og prøvebehandling av marin bløtbunnsfauna (ISO/DIS 16665:2011) Water quality - Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna (ISO/DIS 16665:2011) Kommentarfrist: 01.05.2012 Listenummer: 04/2012 Side: 21 av 128
13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - internasjonale (ISO) ISO/DGuide 78 Safety of machinery -- Rules for drafting and presentation of safety standards Kommentarfrist: 28.06.2012 ISO/DGuide 78 Safety of machinery -- Rules for drafting and presentation of safety standards Kommentarfrist: 26.07.2012 ISO/DIS 6182-1 Fire protection - Automatic sprinkler systems - Part 1: Requirements and test methods for sprinklers (Revision of first edition (ISO 6182-1:1993) Kommentarfrist: 16.04.2012 ISO/DIS 9038 Paints and varnishes - Determination of ability of liquid paints to sustain combustion [Revision of first edition (ISO 9038:1991)] Kommentarfrist: 10.04.2012 ISO/DIS 10068 Mechanical vibration and shock - Free, mechanical impedance of the human hand-arm system at the friving point Kommentarfrist: 15.05.2012 ISO/DIS 10068 Mekaniske vibrasjoner og støt - Mekanisk punktimpedans av menneskets hånd-arm-system Mechanical vibration and shock -- Mechanical impedance of the human hand-arm system at the driving point Kommentarfrist: 13.05.2012 ISO/DIS 10819 Mekaniske vibrasjoner og støt - Hånd-arm-vibrasjoner - Metode for måling og vurdering av vibrasjonsoverføringen av hansker ved håndflaten Mechanical vibration and shock -- Hand-arm vibration -- Method for the measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand Kommentarfrist: 03.04.2012 ISO/DIS 12468-2 Utvendige branneksponering av tak - Del 2: Klassifisering av tak External fire exposure to roofs -- Part 2: Classification of roofs Kommentarfrist: 09.08.2012 ISO/DIS 12468-2 External fire exposure to roofs -- Part 2: Classification of roofs Kommentarfrist: 06.08.2012 ISO/DIS 13073-2 Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 2: Marine environmental risk assessment method for anti-fouling systems on ships using biocidally active substances Kommentarfrist: 17.07.2012 Listenummer: 04/2012 Side: 22 av 128
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 13856-2 Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for the design and testing of pressuresensitive edges and pressure-sensitive bars Kommentarfrist: 03.04.2012 ISO/DIS 13856-2 Safety of machinery -- Pressure-sensitive protective devices -- Part 2: General principles for the design and testing of pressuresensitive edges and pressure-sensitive bars Kommentarfrist: 01.04.2012 ISO/DIS 13856-3 Safety of machinery -- Pressure-sensitive protective devices -- Part 3: General principles for the design and testing of pressuresensitive bumpers, plates, wires and similar devices Kommentarfrist: 08.08.2012 ISO/DIS 13856-3 Safety of machinery -- Pressure-sensitive protective devices -- Part 3: General principles for the design and testing of pressuresensitive bumpers, plates, wires and similar devices Kommentarfrist: 05.08.2012 ISO/DIS 14031 Environmental management - Environmental performance evaluation - Guidelines Kommentarfrist: 05.06.2012 ISO/DIS 14031 Environmental management -- Environmental performance evaluation -- Guidelines Kommentarfrist: 03.06.2012 ISO/DIS 14067 Carbon footprint of products -- Requirements and guidelines for quantification and communication Kommentarfrist: 30.05.2012 ISO/DIS 16191 Water quality - Determination of the toxic effect of sediment and soil on the growth behaviour of Myriophyllum aquaticum Kommentarfrist: 01.05.2012 ISO/DIS 16303 Water quality -- Determination of toxicity of fresh water sediments using Hyalella azteca Kommentarfrist: 24.04.2012 ISO/DIS 16665 Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macro fauna Kommentarfrist: 01.05.2012 ISO/DIS 16665 Water quality -- Guidelines for quantitative sampling and sample processing of marine soft-bottom macrofauna Kommentarfrist: 29.04.2012 Listenummer: 04/2012 Side: 23 av 128
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 17378-1 Water quality -- Determination of arsenic and antimony -- Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) Kommentarfrist: 19.05.2012 ISO/DIS 17378-2 Water quality -- Determination of arsenic and antimony -- Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) Kommentarfrist: 19.05.2012 ISO/DIS 17379-1 Water quality -- Determination of selenium -- Part 1: Method using hydride generation atomic fluorescence spectrometry (HG-AFS) Kommentarfrist: 19.05.2012 ISO/DIS 17379-2 Water quality -- Determination of selenium -- Part 2: Method using hydride generation atomic absorption spectrometry (HG-AAS) Kommentarfrist: 19.05.2012 ISO/DIS 17491-5 Protective clothing - Test methods for clothing providing protection against chemicals -- Part 5: Determination of resistance to penetration by a spray of liquid (manikin spray test) Kommentarfrist: 12.05.2012 ISO/DIS 18589-7 Measurement of radioactivity in the environment -- Soil -- Part 7: In situ measurement of gamma-emitting radionuclides Kommentarfrist: 13.06.2012 ISO/DIS 19238 Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics Kommentarfrist: 30.05.2012 ISO/DIS 19238 Radiation protection -- Performance criteria for service laboratories performing biological dosimetry by cytogenetics Kommentarfrist: 28.05.2012 ISO/DIS 23893-3 Water quality -- Biochemical and physiological measurements on fish -- Part 3: Determination of vitellogenin Kommentarfrist: 24.04.2012 ISO/DIS 28057 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy Kommentarfrist: 03.06.2012 ISO/DIS 29904 Fire chemistry -- Generation and measurement of aerosols Kommentarfrist: 15.04.2012 Listenummer: 04/2012 Side: 24 av 128
13 Miljøvern. Helsevern. Sikkerhet ISO-standarder ISO 11063:2012 Soil quality -- Method to directly extract DNA from soil samples ISO 11269-1:2012 Soil quality -- Determination of the effects of pollutants on soil flora -- Part 1: Method for the measurement of inhibition of root growth Erstatter A00008:20:019247 ISO 11269-2:2012 Soil quality -- Determination of the effects of pollutants on soil flora -- Part 2: Effects of contaminated soil on the emergence and early growth of higher plants Erstatter A00008:20:036425 ISO 16000-28:2012 Indoor air -- Part 28: Determination of odour emissions from building products using test chambers ISO 20347:2012 Personal protective equipment -- Occupational footwear Erstatter A00008:20:032392,A00008:20:042262,A00008:20:043215,A00008:20:044220 ISO 21927-9:2012 Smoke and heat control systems -- Part 9: Specification for control equipment ISO 28802:2012 Ergonomics of the physical environment -- Assessment of environments by means of an environmental survey involving physical measurements of the environment and subjective responses of people ISO 28803:2012 Ergonomics of the physical environment -- Application of International Standards to people with special requirements ISO 29201:2012 Water quality -- The variability of test results and the uncertainty of measurement of microbiological enumeration methods ISO/TS 14033:2012 Environmental management -- Quantitative environmental information -- Guidelines and examples ISO/TS 28581:2012 Water quality -- Determination of selected non-polar substances -- Method using gas chromatography with mass spectrometric detection (GC-MS) Listenummer: 04/2012 Side: 25 av 128
13 Miljøvern. Helsevern. Sikkerhet Rapporter fra CEN (CR) CEN ISO/TR 7250-2:2011 Basale kroppsmål for teknologisk design Del 2: Statistisk oppsummering av kroppsmål for individuelle ISO populasjoner (ISO/TR 7250-2:2010) Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010) CEN ISO/TR 9241-100:2011 Ergonomi for samhandling mellom menneske og system Del 100: Innføring i standarder relatert til software-ergonomi (ISO/TR 9241-100:2010) Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) CEN/TR 614-3:2010 Maskinsikkerhet - Del 3: Ergonomiske prinsipper for konstruksjon av mobilt maskineri Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery CEN/TR 13097:2010 Karakterisering av slam - God praksis for bruk av slam i jordbruket Characterization of sludges - Good practice for sludge utilisation in agriculture CEN/TR 13910:2010 Packaging - Report on criteria and methodologies for life cycle analysis of packaging CEN/TR 15642:2011 Ensartede prøvingsprosedyrer for prøvinger etter EN 3-7:2004+A1:2007 Unified tests procedures for the tests of EN 3-7:2004+A1:2007 CEN/TR 16013-1:2010 Arbeidsplassluft - Veiledning for bruk av instrumenter for aerosolovervåking - Del 1: Valg av monitor for bestemte bruksområder Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 1: Choice of monitor for specific applications CEN/TR 16013-2:2010 Arbeidsplassluft - Veiledning for bruk av instrumenter for aerosolovervåking - Del 2: Evaluering av konsentrasjon av luftbårne partikler ved bruk av "Optical Particle Counters" Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 2: Evaluation of airborne particle concentrations using Optical Particle Counters CEN/TR 16098:2010 Construction products: Assessment of release of dangerous substances - Concept of horizontal testing procedures in support of requirements under the CPD CEN/TR 16099:2010 Utstyr til brannvesenet - Sammenstilling av vanntrykk spesifisert i utgitte standarder fra CEN/TC 192 Fire service equipment - Summary of water pressures specified in published CEN/TC 192 standards Listenummer: 04/2012 Side: 26 av 128