Annonseringsdato: 2015-06-24 Listenummer: 11/2015 Standardiseringsprosjekter og nye standarder Listenummer: 11/2015 Side: 1 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren 736-2 Ventiler - Terminologi - Del 2: Definisjon av komponenter av ventiler Valves - Terminology - Part 2: Definition of components of valves Kommentarfrist: 2015-09-07 pren ISO 1101 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og kjøre ut (ISO/DIS 1011: 2014) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015) Kommentarfrist: 2015-08-25 pren ISO 1101 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Toleranser for form, orientering, plassering og utkjøring ( ISO/DIS 1101 : 2015 ) Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101:2015) Kommentarfrist: 2015-08-25 pren ISO 5577 Non-destructive testing - Ultrasonic testing - Vocabulary (ISO/DIS 5577:2015) Kommentarfrist: 2015-07-31 Standardforslag til høring - internasjonale (ISO) ISO 7001:2007/DAmd 87 Symbol PI BP 009: Biometric facial recognition facility Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 88 Symbol PI BP 010: Look to a point Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 77 Symbol PI BP 015: No headwear Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 79 Symbol PI BP 017: No sunglasses Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 80 Symbol PI BP 018: Single person Kommentarfrist: 2015-09-24 Listenummer: 11/2015 Side: 2 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 81 Symbol PI PF 037: Library Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 82 Symbol PI BP 019: Proceed forward Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 83 Symbol PI TF 036: Self-contained camper van Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 71 Symbol PI TF 034: Quarantine, plant Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 86 Symbol PI BP 012: Move hair Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 78 Symbol PI BP 016: Wait Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 74 Symbol PI PF 072: Loop for the hearing impaired Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 75 Symbol PI BP 014: Do not smile Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 76 Symbol PI BP 013: Open passport and place on scanning device Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 89 Symbol PI CF 019: Shoeshine Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 90 Symbol PI CF 020: Snack machine Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 91 Symbol PI PF 073: Priority facilities for obese people Kommentarfrist: 2015-09-24 Listenummer: 11/2015 Side: 3 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7001:2007/DAmd 92 Symbol PI TF 038: Animal transportation Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 93 Symbol PI TF 039: Bus disembarkation Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 94 Symbol PI TF 040: Bus embarkation Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 95 Symbol PI TF 041: Priority seats for obese people Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 85 Symbol PI BP 011: Manual passport control Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 61 Symbol PI TF 029: Rental bicycle Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 69 Symbol PI TF 032: Quarantine, animal Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 68 Symbol PI TF 031: Quarantine Kommentarfrist: 2015-09-24 ISO 7001:2007/DAmd 70 Symbol PI TF 033: Quarantine, people Kommentarfrist: 2015-09-24 ISO/DIS 129-1 Technical drawings - Indication of dimensions and tolerances - Part 1: General principles Kommentarfrist: 2015-07-20 ISO/DIS 374-1 Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: 2015-09-13 Listenummer: 11/2015 Side: 4 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 374-5 Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: 2015-09-13 ISO/DIS 1101.2 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerances of form, orientation, location and run-out Kommentarfrist: 2015-10-25 ISO/DIS 3767-3 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment - Symbols for operator controls and other displays - Part 3: Symbols for powered lawn and garden equipment Kommentarfrist: 2015-08-04 ISO/DIS 5577 Non-destructive testing - Ultrasonic inspection - Vocabulary Kommentarfrist: 2015-07-31 ISO/DIS 5577 Non-destructive testing -- Ultrasonic testing -- Vocabulary Kommentarfrist: 2015-09-27 ISO/DIS 6405-1 Earth-moving machinery -- Symbols for operator controls and other displays -- Part 1: Common symbols Kommentarfrist: 2015-07-31 ISO/DIS 6621-1 Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: 2015-07-31 ISO/DIS 6621-1 Internal combustion engines -- Piston rings -- Part 1: Vocabulary Kommentarfrist: 2015-09-27 ISO/DIS 28564-2 Public information guidance systems -- Part 2: Design principles and requirements for location signs and direction signs Kommentarfrist: 2015-08-16 ISO-standarder ISO 7504:2015 Gas analysis -- Vocabulary Erstatter A00008:20:024662 ISO 14084-2:2015 Process diagrams for power plants -- Part 2: Graphical symbols Listenummer: 11/2015 Side: 5 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/TS 19408:2015 Footwear -- Sizing -- Vocabulary and terminology ISO/TS 24620-1:2015 Language resource management -- Controlled natural language (CNL) -- Part 1: Basic concepts and principles ISO/TS 80004-2:2015 Nanotechnologies -- Vocabulary -- Part 2: Nano-objects Erstatter A00008:20:044278 Rapporter fra CEN (CR) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Fastsatte norske standarder NS-EN 15429-4:2015 Feiemaskiner - Del 4: Symboler for kontrollpaneler og andre skjermer Sweepers - Part 4: Symbols for operator controls and other displays NS-EN ISO 3098-1:2015 Teknisk produktsdokumentasjon - Skrift - Del 1: Generelle krav (ISO 3098-1:2015) Technical product documentation - Lettering - Part 1: General requirements (ISO 3098-1:2015) NS-EN ISO 5527:2015 Korn - Terminologi (ISO 5527:2015) Cereals - Vocabulary (ISO 5527:2015) Listenummer: 11/2015 Side: 6 av 120
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO 30300:2011 Informasjon og dokumentasjon - Ledelsessystemer for dokumentasjon - Grunntrekk og terminologi Information and documentation - Management systems for records - Fundamentals and vocabulary NS-ISO 30300:2011 Informasjon og dokumentasjon - Ledelsessystemer for dokumentasjon - Grunntrekk og terminologi Information and documentation - Management systems for records - Fundamentals and vocabulary Språk: no Tilbaketrukne norske standarder NS-EN 12584:1999 Uregelmessigheter i skjæreflater ved oksygenbrenngass, laserstråle og plasmaskjæring - Terminologi Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts - Terminology NS-EN ISO 3098-0:1997 Teknisk produktsdokumentasjon - Skrift - Del 0: Generelle krav (ISO 3098-0:1997) Technical product documentation - Lettering - Part 0: General requirements (ISO 3098-0:1997) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 13269 Vedlikehold - Retningslinjer for utarbeidelse av vedlikeholdskontrakter Maintenance - Guideline on preparation of maintenance contracts Kommentarfrist: 2015-08-09 pren 14508 rev Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail Kommentarfrist: 2015-07-19 pren 16708 Skjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten Beauty Salon Services - Requirements and recommendations for the provision of service Kommentarfrist: 2015-07-31 pren 16708 Skjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten Beauty Salon Services - Requirements and recommendations for the provision of service Kommentarfrist: 2015-07-31 pren 16763 Services for fire safety systems and security systems Kommentarfrist: 2015-08-14 Listenummer: 11/2015 Side: 7 av 120
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren 16763 Services for fire safety systems and security systems Kommentarfrist: 2015-08-14 pren 16872 Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: 2015-09-21 Standardforslag til høring - internasjonale (ISO) ISO/DIS 12812-1 Core Banking -- Mobile Financial Services -- Part 1: General framework Kommentarfrist: 2015-08-29 ISO/DIS 12812-2 Core banking -- Mobile Financial Services -- Part 2: Security and data protection for mobile financial services Kommentarfrist: 2015-08-29 ISO/DIS 12812-3 Core Banking -- Mobile Financial Services -- Part 3: Financial application lifecycle management Kommentarfrist: 2015-08-29 ISO/DIS 12812-4 Core Banking -- Mobile Financial Services -- Part 4: Mobile payments-to-person Kommentarfrist: 2015-08-29 ISO/DIS 12812-5 Core Banking -- Mobile Financial Services -- Part 5: Mobile Payments to Business Kommentarfrist: 2015-08-29 ISO/DIS 18587 Translation services -- Post-editing of machine translation output -- Requirements Kommentarfrist: 2015-08-12 ISO-standarder ISO 13810:2015 Tourism services -- Industrial tourism -- Service provision ISO/TR 17185-3:2015 Intelligent transport systems -- Public transport user information -- Part 3: Use cases for journey planning systems and their interoperation ISO/TR 17424:2015 Intelligent transport systems -- Cooperative systems -- State of the art of Local Dynamic Maps concepts Listenummer: 11/2015 Side: 8 av 120
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries -- Guidelines on competency for personnel ISO/TS 18750:2015 Intelligent transport systems -- Cooperative systems -- Definition of a global concept for Local Dynamic Maps Rapporter fra CEN (CR) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TR 24014-2:2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR 24014-2:2013) CEN ISO/TR 24014-3:2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013) CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS 17444-2:2013 Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS 17444-2:2013) CEN ISO/TS 18234-1:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS 18234-1:2013) CEN ISO/TS 18234-2:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS 18234-2:2013) CEN ISO/TS 18234-7:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS 18234-7.2013) Listenummer: 11/2015 Side: 9 av 120
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 10345:2013 Retningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR 15367-1:2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing CEN/TS 16555-1:2013 Innovasjonsledelse - Del 1: System for innovasjonsledelse Innovation Management - Part 1: Innovation Management System CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management Listenummer: 11/2015 Side: 10 av 120
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS 419261:2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN 16636:2015 Tjenester for skadedyrbekjemping - Krav og kompetanse Pest management services - Requirements and competences Tilbaketrukne norske standarder NS-EN 9110:2010 Systemer for kvalitetssikring - Krav til vedlikeholdsorganisasjoner innenfor luftfart Quality Management Systems - Requirements for Aviation Maintenance Organizations 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren 16870 Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: 2015-09-07 Standardforslag til høring - internasjonale (ISO) ISO/DIS 10272-1 Fôr- og næringsmiddelmikrobiologi Horisontal metode for bestemmelse og telling av Campylobacter spp Del 1: Bestemmelsesmetode Microbiology of food and animal feed -- Horizontal method for detection and enumeration of Campylobacter -- Part 1: Detection method Kommentarfrist: 2015-07-05 ISO-standarder ISO 18458:2015 Biomimetics -- Terminology, concepts and methodology Listenummer: 11/2015 Side: 11 av 120
07 Matematikk. Naturvitenskap ISO 18459:2015 Biomimetics -- Biomimetic structural optimization ISO/TS 17728:2015 Microbiology of the food chain -- Sampling techniques for microbiological analysis of food and feed samples ISO/TS 80004-2:2015 Nanotechnologies -- Vocabulary -- Part 2: Nano-objects Erstatter A00008:20:044278 Rapporter fra CEN (CR) CEN ISO/TR 6579-3:2014 Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR 6579-3:2014) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 13830:2013 Nanoteknologi - Veiledning om frivillig merking av forbrukerprodukter som inneholder produserte nanoobjekter (ISO/TS 1380:2013) Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013) CEN ISO/TS 15216-1:2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 1: Metode for kvantitative bestemmelse (ISO/DTS 15216-1:2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 1: Method for quantification (ISO/TS 15216-1:2013, Corrected Version 2013-05-01) CEN ISO/TS 15216-2:2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 2: Metode for kvalitativ bestemmelse (ISO/DTS 15216-2:2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using real-time RT-PCR - Part 2: Method for qualitative detection (ISO/TS 15216-2:2013, Corrected Version 2013-05-01) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) Listenummer: 11/2015 Side: 12 av 120
07 Matematikk. Naturvitenskap CEN ISO/TS 17919:2013 Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013) Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TR 16588:2014 Manual measurement of snow water equivalent 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 21535:2009/prA1 Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for hofteleddsimplantater (ISO21535:2007/DAM1:2015) Non-active surgical implants - Joint replacement implants - Specific requirements for hip-joint replacement implants (ISO 21535:2007/DAM 1:2015) Kommentarfrist: 2015-08-07 pren 16872 Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Kommentarfrist: 2015-09-21 pren ISO 1797 Tannpleie - Skaft for roterende, vibrerende og stemplende instrumenter (ISO/DIS 1797:2015) Dentistry - Shanks for rotary, oscillating and reciprocating instruments (ISO/DIS 1797:2015) Kommentarfrist: 2015-07-16 pren ISO 5832-3 rev Kirurgiske implantater - Metalliske materialer - Del 3:Legering av smidd titan med 6 % aluminium og 4 % vanadium (ISO/DIS 5832-3:2015) Implants for surgery - Metallic materials - Part 3: Wrought titanium 6-aluminium 4-vanadium alloy (ISO/DIS 5832-3:2015) Kommentarfrist: 2015-06-25 Listenummer: 11/2015 Side: 13 av 120
11 Helsevesen, Teknikk pren ISO 7199 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere (oksygenatorer) (ISO/DIS 7199:2015) Cardiovascular implants and artificial organs - Blood-gas exchangers (oxygenators) (ISO/DIS 7199:2015) Kommentarfrist: 2015-07-31 pren ISO 7787-1 rev Tannpleie - Laboratoriefresere - Del 1: Stålfresere til laboratoriebruk (ISO/DIS 7787-1:2015) Dentistry - Laboratory cutters - Part 1: Steel laboratory cutters (ISO/DIS 7787-1:2015) Kommentarfrist: 2015-07-09 pren ISO 25539-1 rev Kardiovaskulære implantater - Endovaskulært utstyr - Del 1: Endovaskulære proteser (ISO/DIS 25539-1:2015) Cardiovascular implants - Endovascular devices - Part 1: Endovascular prostheses (ISO/DIS 25539-1:2015) Kommentarfrist: 2015-07-23 Standardforslag til høring - internasjonale (ISO) ISO/DIS 1797 Dentistry -- Shanks for rotary, oscillating and reciprocating instruments Kommentarfrist: 2015-09-13 ISO/DIS 7199 Kardiovaskulære implantater og kunstige organer - Blodgassutvekslere Cardiovascular implants and artificial organs - Blood-gas exchangers Kommentarfrist: 2015-07-31 ISO/DIS 7787-1 Dentistry -- Laboratory cutters -- Part 1: Steel laboratory cutters Kommentarfrist: 2015-09-06 ISO/DIS 11040-8 Prefilled syringes -- Part 8: Requirements and test methods for finished prefilled syringes Kommentarfrist: 2015-09-14 ISO/DIS 11608-7 Needle-based injection systems for medical use -- Requirements and test methods -- Part 7: Accessibility for persons with visual impairment Kommentarfrist: 2015-09-11 ISO/DIS 12870 Ophthalmic optics - Spectacle frames - Fundamental requirements and test methods Kommentarfrist: 2015-09-11 ISO/DIS 15674 Cardiovascular implants and artificial organs - Hard-shell cardiotomy/venous reservoir system (with/without filter) and soft venous reservoir bags Kommentarfrist: 2015-08-01 Listenummer: 11/2015 Side: 14 av 120
11 Helsevesen, Teknikk ISO/DIS 15675 Cardiovascular implants and artificial organs - Cardiopulmonary bypass systems - Arterial line blood filters Kommentarfrist: 2015-08-01 ISO/DIS 15676 Cardiovascular implants and artificial organs -- Single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation Kommentarfrist: 2015-08-01 ISO/DIS 18618 Dentistry -- Interoperability of CAD/CAM Systems Kommentarfrist: 2015-09-11 ISO/DIS 25539-1 Cardiovascular implants -- Endovascular devices -- Part 1: Endovascular prostheses Kommentarfrist: 2015-07-23 ISO/DIS 80601-2-74 Medical Electrical Equipment -- Part 2-74: Particular requirements for basic safety and essential performance of respiratory humidifying equipment Kommentarfrist: 2015-09-03 ISO-standarder ISO 16971:2015 Ophthalmic instruments -- Optical coherence tomograph for the posterior segment of the human eye ISO 19045:2015 Ophthalmic optics -- Contact lens care products -- Method for evaluating Acanthamoeba encystment by contact lens care products ISO/TR 80001-2-7:2015 Application of risk management for IT-networks incorporating medical devices -- Application guidance -- Part 2-7: Guidance for Healthcare Delivery Organizations (HDOs) on how to self-assess their conformance with IEC 80001-1 ISO/TS 17518:2015 Medical laboratories -- Reagents for staining biological material -- Guidance for users Rapporter fra CEN (CR) CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) Listenummer: 11/2015 Side: 15 av 120
11 Helsevesen, Teknikk CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 16677:2014 Øyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release Fastsatte norske standarder NS-EN 1865-2:2010+A1:2015 Utstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher NS-EN 1865-3:2012+A1:2015 Bårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher NS-EN 13718-2:2015 Ambulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements for air ambulances NS-EN 16442:2015 Skap med kontrollert miljø for oppbevaring av behandlede termolabilie endoskop Controlled environment storage cabinet for processed thermolabile endoscopes NS-EN 45502-2-2:2008 Aktivt implanterbart medisinsk utstyr - Del 2-2: Særskilte krav til aktivt implanterbart medisinsk utstyr beregnet på behandling av takykardi (omfatter implanterbare defibrillatorer) Active implantable medical devices - Part 2-2: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (includes implantable defibrillators) NS-EN ISO 5356-1:2015 Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Hann- og hunnkoner (ISO 5356-1:2015) Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2015) NS-EN ISO 9687:2015 Tannpleie - Grafiske symboler for utstyr (ISO 9687:2015) Dentistry - Graphical symbols for dental equipment (ISO 9687:2015) Tilbaketrukne norske standarder NS-EN 1865-2:2010 Utstyr til å bære pasienter til bruk i veiambulanser - Del 2: Bårer med elektrisk motor Patient handling equipment used in road ambulances - Part 2: Power assisted stretcher Listenummer: 11/2015 Side: 16 av 120
11 Helsevesen, Teknikk NS-EN 1865-3:2012 Bårer og bæreutstyr til bruk i veiambulanser - Del 3: Båre for tung last Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher NS-EN 13718-2:2008 Ambulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements of air ambulances NS-EN ISO 5356-1:2004 Anestesi- og respirasjonsutstyr - Koniske koblingsstykker - Del 1: Han- og hunkoner (ISO 5356-1:2004) Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004) NS-EN ISO 9687:1995 Tannpleie - Grafiske symboler for utstyr (ISO 9687:1993) Dental equipment - Graphical symbols (ISO 9687:1993) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO 389-7:2005/prA1 Endringsblad 1: Referansehøreterskel ved 20 Hz og 18 000 Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust feltforhold Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions (ISO 389-7:2005/DAmd 1:2015) Kommentarfrist: 2015-08-07 EN ISO 8041:2005/prA1:2015 Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015) Human response to vibration - Measuring instrumentation - Amendment 1 (ISO 8041:2005/DAM 1:2015) Kommentarfrist: 2015-06-25 pren 13204 rev Dobbeltvirkende hydrauliske redningsverktøy for brann og redningstjenestebruk - Sikkerhets- og ytelseskrav Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements Kommentarfrist: 2015-07-19 pren 14582 Karakterisering av avfall - Halogen- og svovelinnhold - Bestemmelsesmetoder for oksygenforbrenning i lukkede systemer Characterization of waste - Halogen and sulfur content - Oxygen combustion in closed systems and determination methods Kommentarfrist: 2015-07-26 Listenummer: 11/2015 Side: 17 av 120
13 Miljøvern. Helsevern. Sikkerhet pren 14944-1 Påvirkning av sementliknende produkter på vann tiltenkt human konsumpsjon - Test metoder - Del 1: Innflytelse av migrasjone fra fabrikkprodusert sementliknende podukter på organoleptiske parametere Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters Kommentarfrist: 2015-08-02 pren 14944-1 rev Influence of cementitious products on water intended for human consumption - Test methods - Part 1: Influence of migration from factory made cementitious products on the organoleptic parameters Kommentarfrist: 2015-08-02 pren 14944-3 Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products Kommentarfrist: 2015-08-02 pren 14944-3 rev Influence of cementitious products on water intended for human consumption - Test methods - Part 3: Migration of substances from factory-made cementitious products Kommentarfrist: 2015-08-02 pren 16516 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air Kommentarfrist: 2015-09-21 pren 16785-2 Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method Kommentarfrist: 2015-07-26 pren 16848 Biobaserte produkter - Templat for B2B rapportering og kommunikasjon av karakteristikker - Dataark Bio-based products - Template for B2B reporting and communication of characteristics - Data sheet Kommentarfrist: 2015-07-05 pren 16856 Portable aerosol dispenser for fire extinguishing purposes Kommentarfrist: 2015-08-31 pren 16859 Vannundersøkelse Veiledning for overvåking av elvemusling populasjoner (Margaritifera margaritifera) og deres livsmiljø Water quality - Guidance standard on monitoring freshwater pearl mussel (margaritifera margaritifera) populations and their environment Kommentarfrist: 2015-09-07 pren 16870 Vannundersøkelse - Veiledning for vurdering av tilstand til hydromorfologiske forhold i innsjøer Water quality - Guidance standard on determining the hydromorphological conditions of lakes Kommentarfrist: 2015-09-07 Listenummer: 11/2015 Side: 18 av 120
13 Miljøvern. Helsevern. Sikkerhet pren ISO 374-1 Protective gloves against dangerous chemicals and micro-organisms - Part 1: Terminology and performance requirements for chemical risks (ISO/DIS 374-1:2015) Kommentarfrist: 2015-07-16 pren ISO 374-5 Protective gloves against dangerous chemicals and micro-organisms - Part 5: Terminology and performance requirements for micro-organism risks (ISO/DIS 374-5:2015) Kommentarfrist: 2015-07-16 pren ISO 7029 rev Akustikk - Statistisk fordeling av høreterskler som funksjon av alder (ISO/DIS 7029:2015) Acoustics - Statistical distribution of hearing thresholds related to age and gender (ISO/DIS 7029:2015) Kommentarfrist: 2015-08-21 pren ISO 15012-4 Health and safety in welding and allied processes - Equipment for capture and separation of fume - Part 4: General requirements (ISO/DIS 15012-4:2015) Kommentarfrist: 2015-06-30 Standardforslag til høring - internasjonale (ISO) ISO 389-7:2005/DAmd 1 Endringsblad 1: Referansehøreterskel ved 20 Hz og 18 000 Hz ved lytting under fritt felt-forhold og ved 20 Hz under diffust feltforhold Reference threshold of hearing at 20 Hz and 18 000 Hz under free-field listening conditions and at 20 Hz under diffuse-field listening conditions Kommentarfrist: 2015-08-07 ISO 8041:2005/DAmd 1 Menneskets respons på vibrasjoner - Måleutstyr - Endringsblad 1 (ISO 8041:2005/DAM 1:2015) Kommentarfrist: 2015-06-25 ISO 14835-1:2005/DAmd 1 Mekaniske vibrasjoner og støt - Kuldeprovokasjonsprøving for vurdering av perifer vaskulær funksjon - Del 1: Måling og vurdering av temperatur på huden på fingeren - Endringsblad 1 Kommentarfrist: 2015-09-24 ISO/DIS 374-1 Protective gloves against dangerous chemicals and micro-organisms -- Part 1: Terminology and performance requirements for chemical risks Kommentarfrist: 2015-09-13 ISO/DIS 374-5 Protective gloves against dangerous chemicals and micro-organisms -- Part 5: Terminology and performance requirements for micro-organisms risks Kommentarfrist: 2015-09-13 Listenummer: 11/2015 Side: 19 av 120
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 1996-2 Akustikk - Beskrivelse, måling og vurdering av miljøstøy - Del 2: Bestemmelse av støynivåer i miljø Acoustics -- Description, assessment and measurement of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: 2015-08-26 ISO/DIS 1996-2 Acoustics -- Description, measurement and assessment of environmental noise -- Part 2: Determination of environmental noise levels Kommentarfrist: 2015-10-23 ISO/DIS 7029 Akustikk - Statistisk fordeling av høreterskler som funksjon av alder Acousticx - Statistical distribution of hearing thresholds as a function of age Kommentarfrist: 2015-08-06 ISO/DIS 7029 Akustikk - Statistisk fordeling av høreterskler som funksjon av alder Acoustics - Statistical distribution of hearing thresholds related to age and gender Kommentarfrist: 2015-10-03 ISO/DIS 7243 Ergonomics of the thermal environment -- Assessment of heat stress using the WBGT (wet bulb globe temperature) index Kommentarfrist: 2015-09-11 ISO/DIS 12219-6 Interior air of road vehicles -- Part 6: Method for the determination of the emissions of semi-volatile organic compounds from vehicle interior parts and materials at higher temperature -- Small chamber method Kommentarfrist: 2015-08-16 ISO/DIS 12402-2 Personal flotation devices -- Part 2: Lifejackets, performance level 275 -- Safety requirements Kommentarfrist: 2015-11-01 ISO/DIS 12402-3 Personal flotation devices -- Part 3: Lifejackets, performance level 150 -- Safety requirements Kommentarfrist: 2015-11-01 ISO/DIS 12402-4 Personal flotation devices -- Part 4: Lifejackets, performance level 100 -- Safety requirements Kommentarfrist: 2015-11-01 ISO/DIS 12402-5 Personal flotation devices -- Part 5: Buoyancy aids (level 50) -- Safety requirements Kommentarfrist: 2015-11-01 Listenummer: 11/2015 Side: 20 av 120
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 12402-7 Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: 2015-09-04 ISO/DIS 12402-7 Personal flotation devices -- Part 7: Materials and components -- Safety requirements and test methods Kommentarfrist: 2015-11-01 ISO/DIS 12402-8 Personal flotation devices -- Part 8: Accessories -- Safety requirements and test methods Kommentarfrist: 2015-11-01 ISO/DIS 12402-9 Personal flotation devices -- Part 9: Test methods Kommentarfrist: 2015-11-01 ISO/DIS 12402-2 Personal flotation devices - Part 2: Class B (offshore lifejackets, extreme conditions - 275N), safety requirements Kommentarfrist: 2015-09-04 ISO/DIS 12402-3 Personal flotation devices - Part 3: Class C (offshore lifejackets, extreme conditions - 150N), safety requirements Kommentarfrist: 2015-09-04 ISO/DIS 12402-4 Personal flotation devices - Part 4: Class D (inland/close to shore lifejackets - 100 N), safety requirements Kommentarfrist: 2015-09-04 ISO/DIS 12402-5 Personal flotation devices - Part 5: Class E, (buoyance aids - 50 N), safety requirements Kommentarfrist: 2015-09-04 ISO/DIS 12402-8 Personal flotation devices - Part 8: Additional items, safety requirements and test methods Kommentarfrist: 2015-09-04 ISO/DIS 12402-9 Personal flotation devices - Part 9: Test methods for classes A to F Kommentarfrist: 2015-09-04 ISO/DIS 13073-3 Ships and marine technology -- Risk assessment on anti-fouling systems on ships -- Part 3: Human health risk assessment of biocidally active substances in anti-fouling paints on ships during the application and removal process Kommentarfrist: 2015-07-31 Listenummer: 11/2015 Side: 21 av 120
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 14004 Environmental management systems -- General guidelines on principles, systems and support techniques Kommentarfrist: 2015-07-12 ISO/DIS 14034 Environmental management -- Environmental technology verification (ETV) Kommentarfrist: 2015-10-29 ISO/DIS 15011-1 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 1: Determination of fume emission rate during arc welding and collection of fume for analysis Kommentarfrist: 2015-07-05 ISO/DIS 17179 Stationary source emissions -- Determination of the mass concentration of ammonia in flue gas -- Performance characteristics of automated measuring systems Kommentarfrist: 2015-08-22 ISO/DIS 18079-1 Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 1: General Kommentarfrist: 2015-08-27 ISO/DIS 18079-3 Ships and marine technology -- Servicing of inflatable life-saving appliances -- Part 3: Inflatable lifejackets Kommentarfrist: 2015-08-27 ISO/DIS 24516-1 Guidelines for Management of Assets of water supply and wastewater systems -- Part 1: Drinking water distribution networks Kommentarfrist: 2015-08-01 ISO/DIS 37101 Bærekraftig utvikling av samfunn -- Styringssystemer -- Krav med veiledning for motstandsdyktighet og smarthet Sustainable development of communities -- Management systems -- Requirements with guidance for resilience and smartness Kommentarfrist: 2015-08-30 ISO-standarder ISO 11999-1:2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 1: General Erstatter A00008:20:060185 ISO 11999-3:2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 3: Clothing Erstatter A00008:20:060187 Listenummer: 11/2015 Side: 22 av 120
13 Miljøvern. Helsevern. Sikkerhet ISO 11999-4:2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 4: Gloves Erstatter A00008:20:060191 ISO 12312-2:2015 Eye and face protection -- Sunglasses and related eyewear -- Part 2: Filters for direct observation of the sun ISO 13164-4:2015 Water quality -- Radon-222 -- Part 4: Test method using two-phase liquid scintillation counting ISO 16505:2015 Road vehicles -- Ergonomic and performance aspects of Camera Monitor Systems -- Requirements and test procedures ISO/TR 22100-1:2015 Safety of machinery -- Relationship with ISO 12100 -- Part 1: How ISO 12100 relates to type-b and type-c standards ISO/TS 11999-2:2015 PPE for firefighters -- Test methods and requirements for PPE used by firefighters who are at risk of exposure to high levels of heat and/or flame while fighting fires occurring in structures -- Part 2: Compatibility ISO/TS 16976-2:2015 Respiratory protective devices -- Human factors -- Part 2: Anthropometrics Erstatter A00008:20:042762,A00008:20:060692 ISO/TS 37151:2015 Smart community infrastructures -- Principles and requirements for performance metrics Rapporter fra CEN (CR) CEN ISO/TR 12296:2013 Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) CEN ISO/TS 29843-1:2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010) CEN ISO/TR 9241-331:2013 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR 9241-331:2012) CEN ISO/TS 9241-411:2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012) Listenummer: 11/2015 Side: 23 av 120
13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) CEN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected version 2012-02-01) CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data CEN/TR 15350:2013 Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery CEN/TR 16193:2013 Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16456:2013 Karakterisering av slam Veiledning for avvanning av slam Characterization of sludges - Good practice of sludge dewatering CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TR 16705:2014 Perimeter protection - Performance classification methodology CEN/TR 16721:2014 Biobaserte produkter - Oversikt over metoder for å bestemme biobasert innhold Bio-based products - Overview of methods to determine the bio-based content CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes Listenummer: 11/2015 Side: 24 av 120
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs CEN/TS 13649:2014 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption CEN/TS 15937:2013 Slam, behandlet organisk avfall og jord - Bestemmelse av spesifikk elektrisk konduktivitet Sludge, treated biowaste and soil - Determination of specific electrical conductivity CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) CEN/TS 16201:2013 Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules CEN/TS 16202:2013 Sludge, treated biowaste and soil - Determination of impurities and stones CEN/TS 16450:2013 Luftundersøkelse - Uteluft - Automatiserte målesystemer til måling av svevestøvkonsentrasjonen (PM10, PM2,5) Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 CEN/TS 16516:2013 Byggevarer - Vurdering av frigjøring av farlige stoffer - Bestemmelse av utslipp til inneluft Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air Listenummer: 11/2015 Side: 25 av 120
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16524:2013 Mekaniske produkter - Ecodesign metodikk Mechanical products - Methodology for reduction of environmental impacts in product design and development CEN/TS 16595:2013 CBRN - Vulnerability Assessment and Protection of People at Risk CEN/TS 16637-1:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS 16637-2:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene CEN/TS 16660:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the monolithic status of waste CEN/TS 16692:2015 Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i hele vannprøver ved hjelp av fastfaseekstraksjon (SPE) og gasskromatografi med trippel kvadrupol-massespektrometri Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) Fastsatte norske standarder NS-EN 54-27:2015 Brannalarmanlegg - Del 27: Røykdetektorer for kanaler Fire detection and fire alarms systems - Part 27: Duct smoke detectors Listenummer: 11/2015 Side: 26 av 120
13 Miljøvern. Helsevern. Sikkerhet NS-EN 12972:2015 Tanker for transport av farlig gods - Prøving, inspeksjon og merking av metalliske tanker Tanks for transport of dangerous goods - Testing, inspection and marking of metallic tanks NS-EN 14429:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper - Innvirkning fra ph på utlekking ved initial syre/basetilsetting Characterization of waste - Leaching behaviour test - Influence of ph on leaching with initial acid/base addition NS-EN 14533:2015 Tekstiler og tekstilprodukter - Brennbarheten til sengetøy - Klassifiseringsskjema Textiles and textile products - Burning behaviour of bedding items - Classification scheme NS-EN 14997:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper - Innvirkning fra ph på utlekking med kontinuerlig ph-kontroll Characterization of waste - Leaching behaviour test - Influence of ph on leaching with continuous ph control NS-EN 16523-1:2015 Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 1: Gjennomtrenging av flytende kjemikalier som er i kontinuerlig kontakt med materialer Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact NS-EN 16523-2:2015 Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier - Del 2: Gjennomtrenging av kjemikalier i gassform som er i kontinuerlig kontakt med materialer Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact NS-EN 16623:2015 Maling og lakk - Reaktive belegg for brannbeskyttelse av metalliske underlag - Definisjoner, krav, egenskaper og merking Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking Tilbaketrukne norske standarder NS-EN 133:2001 Åndedrettsvern - Klassifikasjon Respiratory protective devices - Classification NS-EN 374-3:2003 Vernehansker mot kjemikalier og mikroorganismer - Del 3: Bestemmelse av motstand mot molekylær gjennomtrengning av kjemikalier - (innbefattet rettelsesblad AC:2006) Protective gloves against chemicals and micro-organisms - Part 3: Determination of resistance to permeation by chemicals - (Corrigendum AC:2006 incorporated) Listenummer: 11/2015 Side: 27 av 120