Annonseringsdato: 2009-06-16 Listenummer: 7/2009 Standardiseringsprosjekter og nye standarder Listenummer: 7/2009 Side: 1 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON 01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON Standardforslag til høring - europeiske (CEN) EN ISO 5457:1999/prA1 Teknisk produktspesifikasjon - Størrelser og layout på tegneark Technical product documentation - Sizes and layout of drawing sheets - Amendment 1 (ISO 5457:1999/DAmd 1:2009) Kommentarfrist: 12.07.2009 pren 15429-2 Feiemaksiner- Krav til ytelse og prøvingsmetode Sweepers - Part 2: Performance requirements and test methods Kommentarfrist: 05.07.2009 pren 15898 Conservation of cultural property - Main general terms and definitions concerning conservation of cultural property Kommentarfrist: 08.07.2009 pren 15900 Energieffektivitetstjenester - Definisjoner og grunnleggende krav Energy efficiency services - Definitions and essential requirements Kommentarfrist: 22.06.2009 pren 15947-1 Pyrotechnic articles - Fireworks, Categories 1, 2, and 3 - Part 1: Terminology Kommentarfrist: 21.10.2009 pren ISO 4007 Personal protective equipment - Eye and face protection - Vocabulary (ISO/DIS 4007:2009) Kommentarfrist: 29.07.2009 pren ISO 12180-1 Geometrikse produktspesifikasjoner (GPS) - Sylindrisitet - Del 1: Terminologi og parametre for sylindrisk form (ISO/DIS 12180-1:2009) Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/DIS 12180-1:2009) Kommentarfrist: 07.10.2009 pren ISO 12181-1 Geometriske produktspesifikasjoner (GPS) - Rundhet - Del 1: Terminologi og parametre for rundhet (ISO/DIS 12181-1:2009) Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/DIS 12181-1:2009) Kommentarfrist: 07.10.2009 pren ISO 12780-1 Geometriske produktspesifikasjoner (GPS) - Retthet - Del 1: Terminiologi og parametre for retthet (ISO/DIS 12780-1:2009) Geometrical product specifications (GPS) - Straightness - Part 1: Vocabulary and parameters of straightness (ISO/DIS 12780-1:2009) Kommentarfrist: 07.10.2009 Listenummer: 7/2009 Side: 2 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON pren ISO 12781-1 Geometriske produktspesifikasjoner GPS) - Planhet - Del 1: Terminologi og parametre for planhet (ISO/DIS 12781-1:2009) Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/DIS 12781-1:2009) Kommentarfrist: 07.10.2009 pren ISO 15223-1 Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS 15223-1:2009) Kommentarfrist: 28.10.2009 pren ISO 17450-2 Geometriske produktspesifikasjoner (GPS) - Vanlige begreper - Del 2: Grunnleggende prinsipper, spesifikasjoner, operatører og usikkerhet (ISO/DIS 17450-2:2009) Geometrical product specifications (GPS) - General concepts - Part 2: Basic tenets, specifications, operators and uncertainties (ISO/DIS 17450-2:2009) Kommentarfrist: 07.10.2009 Standardforslag til høring - internasjonale (ISO) ISO 5457:1999/DAmd 1 Kommentarfrist: 12.07.2009 ISO 7010:2003/DAmd 61 Safety sign P012 -- No heavy load Kommentarfrist: 29.06.2009 ISO/DGuide 73 Risk management -- Vocabulary Kommentarfrist: 18.09.2009 ISO/DIS 12100 Safety of machinery - General principles for design, risk assessment and risk reduction Kommentarfrist: 19.07.2009 ISO/DIS 15223-1 Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: 28.10.2009 ISO/DIS 15223-1 Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: 28.10.2009 ISO/DIS 18115-1 Surface chemical analysis -- Vocabulary -- Part 1: General terms and terms used in spectroscopy Kommentarfrist: 27.07.2009 Listenummer: 7/2009 Side: 3 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON ISO/DIS 18115-2 Surface chemical analysis -- Vocabulary -- Part 2: Terms used in scanned-probe microscopy Kommentarfrist: 27.07.2009 ISO/DIS 22745-2 Industrial automation systems and integration -- Open technical dictionaries and their application to master data -- Part 2: Vocabulary Kommentarfrist: 13.08.2009 ISO/DIS 24612 Language resource management -- Linguistic annotation framework (LAF) Kommentarfrist: 06.08.2009 ISO/DIS 24614-1 Language resource management -- Word segmentation of written texts for monolingual and multilingual information processing -- Part 1: Basic concepts and general principles Kommentarfrist: 20.07.2009 ISO/DIS 24615 Language resource management -- Syntactic annotation framework (SynAF) Kommentarfrist: 06.08.2009 ISO/DIS 28564-1 Public information guidance systems -- Part 1: Design principles and element requirements for location plans, maps and diagrams Kommentarfrist: 19.06.2009 ISO/DIS 29383 Terminology policies -- Development and implementation Kommentarfrist: 12.08.2009 ISO-standarder ISO 1122-1:1998/Cor 2:2009 ISO 3272-1:2003/Cor 1:2009 ISO 6814:2009 Machinery for forestry -- Mobile and self-propelled machinery -- Terms, definitions and classification Erstatter A00008:20:023020 ISO 12100-1:2003/Amd 1:2009 ISO 80000-12:2009 Quantities and units -- Part 12: Solid state physics Erstatter A00008:20:003657,A00008:20:028984 Listenummer: 7/2009 Side: 4 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON ISO/TR 26122:2008/Cor 1:2009 Rapporter fra CEN (CR) CEN ISO/TS 12180-1:2007 Geometrical product specifications (GPS) - Cylindricity - Part 1: Vocabulary and parameters of cylindrical form (ISO/TS 12180-1:2003) CEN ISO/TS 12181-1:2007 Geometrical product specifications (GPS) - Roundness - Part 1: Vocabulary and parameters of roundness (ISO/TS 12181-1:2003) CEN ISO/TS 12781-1:2007 Geometrical product specifications (GPS) - Flatness - Part 1: Vocabulary and parameters of flatness (ISO/TS 12781-1:2003) CEN ISO/TS 12781-2:2007 Geometrical product specifications (GPS) - Flatness - Part 2: Specification operators (ISO/TS 12781-2:2003) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN/TR 13233:2007/AC:2007 Advanced technical ceramics - Notations and symbols CEN/TS 15504:2007 Kollektivtransport - Kjøretøy for vei - Innretning for synlig, skiftende passasjerinformasjon inne i kjøretøyet (må sjekkes) Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle CEN/TS 15679:2007 Varmebehandlet tre - Definisjoner og egenskaper Thermal Modified Timber - Definitions and characteristics CEN/TS 15810:2008 Grafiske symboler for bruk på utstyr i integrerte tekniske bygningsinstallasjoner ITB Graphical symbols for use on integrated building automation equipment Fastsatte norske standarder NS-EN 415-1:2000+A1:2009 Sikkerhet ved emballeringsmaskiner - Del 1: Terminologi og klassifisering av emballeringsmaskiner og tilhørende utstyr Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment NS-EN 614-1:2006+A1:2009 Maskinsikkerhet - Ergonomiske prinsipper for konstruksjon - Del 1: Terminologi og generelle prinsipper Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles Listenummer: 7/2009 Side: 5 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON NS-EN 13103:2009 Jernbane - Hjulsett og boggier - Rullende aksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Non-powered axles - Design guide NS-EN 13104:2009 Jernbane - Hjulsett og boggier - Drivaksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Powered axles - Design method NS-EN 15532:2008/AC:2009 Rettelsesblad AC - Sykler - Terminologi Corrigendum AC - Cycles - Terminology NS-EN ISO 8655-1:2002/AC:2009 Rettelsesblad AC - Stempeldrevet volumetrisk utstyr - Del 1: Terminologi, generelle krav og anbefalinger om bruk (ISO 8655-1:2002/Cor 1:2008) Corrigendum AC - Piston-operated volumetric apparatus - Part 1: Terminology, general requirements and user recommendations (ISO 8655-1:2002/Cor 1:2008) NS-EN ISO 10135:2009 Geometriske produktspesifikasjoner (GPS) - Tegningsangivelser av støpte deler i teknisk produktdokumentasjon (TPD) (ISO 10135:2007) Geometrical product specifications (GPS) - Drawing indications for moulded parts in technical product documentation (TPD) (ISO 10135:2007) NS-EN ISO 18369-1:2006/A1:2006 Endringsblad A1 - Oftalmisk optikk - Kontaktlinser - Del 1: Terminologi, klassifiseringssystem og anbefalinger for etikettering av spesifikasjoner (ISO 18369-1:2006/Amd 1:2009) Amendment A1 - Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO 18369-1:2006/Amd 1:2009) NS-EN ISO 21531:2009 Tannpleie - Grafiske symboler for tannpleieinstrumenter (ISO 21531:2009) Dentistry - Graphical symbols for dental instruments (ISO 21531:2009) NS-ISO 5127:2001 Informasjon og dokumentasjon - Terminologi Information and documentation - Vocabulary NS-ISO 5127:2001 Informasjon og dokumentasjon - Terminologi Information and documentation - Vocabulary Språk: no Tilbaketrukne norske standarder NS-EN 415-1:2000 Sikkerhet ved emballeringsmaskiner - Del 1: Terminologi og klassifisering av emballeringsmaskiner og tilhørende utstyr Packaging machines safety - Part 1: Terminology and classification of packaging machines and associated equipment Listenummer: 7/2009 Side: 6 av 170
01 GENERELT. TERMINOLOGI. STANDARDISERING. DOKUMENTASJON NS-EN 614-1:2006 Maskinsikkerhet - Ergonomiske prinsipper for konstruksjon - Del 1: Terminologi og generelle prinsipper Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles NS-EN 13103:2001 Jernbane - Hjulsett og boggier - Rullende aksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Non powered axles - Design method NS-EN 13104:2001 Jernbane - Hjulsett og boggier - Drivaksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Powered axles - Design method NS-ISO 31-7:1992 Størrelser og enheter - Del 7: Akustikk Quantities and units - Part 7: Acoustics Språk: no 03 SOSIOLOGI. TJENESTER. BEDRIFTSORGANISASJON OG -LEDELSE. ADMINISTRASJON. TRANSPORT Standardforslag til høring - europeiske (CEN) pren 15331 Criteria for design, management and control of maintenance services for buildings Kommentarfrist: 05.07.2009 pren 15900 Energieffektivitetstjenester - Definisjoner og grunnleggende krav Energy efficiency services - Definitions and essential requirements Kommentarfrist: 22.06.2009 Standardforslag til høring - internasjonale (ISO) ISO/DGuide 73 Risk management -- Vocabulary Kommentarfrist: 18.09.2009 ISO/DIS 21215 Intelligent transport systems -- Communications access for land mobiles (CALM) -- CALM M5 Kommentarfrist: 17.09.2009 ISO/DIS 21216-1 Intelligent transport systems -- Wireless communications -- CALM using millimetre communications -- Part 1: Air interface Kommentarfrist: 17.09.2009 Listenummer: 7/2009 Side: 7 av 170
03 SOSIOLOGI. TJENESTER. BEDRIFTSORGANISASJON OG -LEDELSE. ADMINISTRASJON. TRANSPORT ISO/DIS 24102 Intelligent transport systems -- Communications access for land mobiles (CALM) -- CALM Management Kommentarfrist: 17.09.2009 ISO-standarder ISO 22935-1:2009 Milk and milk products -- Sensory analysis -- Part 1: General guidance for the recruitment, selection, training and monitoring of assessors ISO 24103:2009 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Media adapted interface layer (MAIL) ISO/TR 12859:2009 Intelligent transport systems -- System architecture -- Privacy aspects in ITS standards and systems ISO/TR 18532:2009 Guidance on the application of statistical methods to quality and to industrial standardization CEN Workshop Agreements CWA 15971-1:2009 Discovery of and Access to egovernment Resources? Part 1: Introduction and Overview CWA 15971-2:2009 Discovery of and Access to egovernment Resources - Part 2: Reference Ontology and Metadata Schema CWA 15971-3:2009 Discovery of and Access to egovernment Resources - Part 3: Protocol for the Syndication of Semantic Descriptions (SDShare) CWA 15971-4:2009 Discovery of and Access to egovernment Resources? Part 4: Federated Terminological Resources CWA 15971-5:2009 Discovery of and Access to egovernment Resources - Part 5: Establishment of a set of Soft Cultural Elements CWA 15971-6:2009 Discovery of and Access to egovernment Resources - Part 6: Evaluation and Recommendations Rapporter fra CEN (CR) CEN ISO/TS 22475-3:2007 Geotechnical investigation and testing - Sampling methods and groundwater measurements - Part 3: Conformity assessment of enterprises and personnel by third party (ISO/TS 22475-3:2007) Listenummer: 7/2009 Side: 8 av 170
03 SOSIOLOGI. TJENESTER. BEDRIFTSORGANISASJON OG -LEDELSE. ADMINISTRASJON. TRANSPORT CEN ISO/TS 24534-1:2007 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 1: Arkitektur Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 1: Architecture (ISO/TS 24534-1:2007) CEN ISO/TS 24534-2:2007 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 2: Driftskrav Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 2: Operational requirements (ISO/TS 24534-2:2007) CEN ISO/TS 24534-3:2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 3: Kjøretøydata Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data (ISO/TS 24534-3:2008) CEN ISO/TS 24534-4:2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 4: Sikker kommunikasjon ved bruk av asymmetrisk teknikk Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO/TS 24534-4:2008) CEN ISO/TS 25110:2008 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (OBU) med kortleser Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2008) CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination CEN/TR 15628:2007 Maintenance - Qualification of Maintenance personnel CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points CEN/TS 1591-4:2007 Flenser og forbindelser - Konstruksjonsregler for sirkulære flensforbindelser med pakning - Del 4: Kvalifisering av kompetanse hos personell som monterer flensforbindelser på utstyr underlagt direktiv om trykkpåkjent utstyr Flanges and their joints - Design rules for gasketed circular flange connections - Part 4: Qualification of personnel competency in the assembly of bolted joints fitted to equipment subject to the Pressure Equipment Directive CEN/TS 15448:2006/AC:2007 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) Listenummer: 7/2009 Side: 9 av 170
03 SOSIOLOGI. TJENESTER. BEDRIFTSORGANISASJON OG -LEDELSE. ADMINISTRASJON. TRANSPORT CEN/TS 15504:2007 Kollektivtransport - Kjøretøy for vei - Innretning for synlig, skiftende passasjerinformasjon inne i kjøretøyet (må sjekkes) Public transport - Road vehicles - Visible variable passenger information devices inside the vehicle CEN/TS 15511:2008 Posttjenester - Tjenestekvalitet - Tilgjengelig informasjon om posttjenester Postal services - Quality of service - Information available on postal services CEN/TS 15722:2009 Veitransporttelematikk - ESikkerhet - Mangler Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) CEN/TS 15873:2009 Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation CEN/TS 99001:2008 Business support - Support services provided to small enterprises - Terminology, quality and performance Fastsatte norske standarder NS-EN 9121:2009 Aerospace series - Quality management systems - Assessment applicable to stockist distributors (based on ISO 9001:2000) 07 MATEMATIKK. NATURVITENSKAP Standardforslag til høring - internasjonale (ISO) ISO/DIS 10801 Nanotechnologies -- Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method Kommentarfrist: 16.09.2009 ISO/DIS 10808 Nanotechnologies -- Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing Kommentarfrist: 12.08.2009 ISO/DIS 13720 Meat and meat products -- Enumeration of presumptive Pseudomonas spp. Kommentarfrist: 28.06.2009 ISO/DIS 29701 Nanotechnologies -- Endotoxin test on nanomaterial samples for in vitro systems -- Limulus amebocyte lysate (LAL) test Kommentarfrist: 02.09.2009 Listenummer: 7/2009 Side: 10 av 170
07 MATEMATIKK. NATURVITENSKAP Rapporter fra CEN (CR) CEN ISO/TS 11133-1:2009 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2009) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN/TS 15790:2008 Dyrefôr - PCR typing av probiotiske Saccharomyces cerevisiae (gjær) Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) 11 HELSEVESEN, TEKNIKK Standardforslag til høring - europeiske (CEN) EN 13060:2004/prA2 Små vanndampautoklaver Small steam sterilizers Kommentarfrist: 05.07.2009 EN ISO 7396-1:2007/prA2 Sentralgassanlegg for medisinske gasser - Del 1: Sentraler og fordelingsnett for komprimerte medisinske gasser og vakuum Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum - Amendment 2 (ISO 7396-1:2007/DAM 2:2009) Kommentarfrist: 05.07.2009 pren 12182 Assistive products for persons with disability - General requirements and test methods Kommentarfrist: 21.10.2009 pren 15908 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases Kommentarfrist: 19.07.2009 pren 15927 Tjenester som tilbys av profesjonelle høreapparatformidlere Services offered by hearing aid professionals Kommentarfrist: 19.08.2009 pren ISO 4074 Natural rubber latex condoms - Requirements and test methods (ISO/DIS 4074:2009) Kommentarfrist: 28.10.2009 Listenummer: 7/2009 Side: 11 av 170
11 HELSEVESEN, TEKNIKK pren ISO 7885 Dentistry - Sterile injection needles for single use (ISO/DIS 7885:2009) Kommentarfrist: 22.06.2009 pren ISO 10271 Dental metallic materials - Corrosion test methods (ISO/FDIS 10271:2009) Kommentarfrist: 30.09.2009 pren ISO 10451 Dentistry - Contents of technical file for dental implant systems (ISO/DIS 10451:2009) Kommentarfrist: 29.07.2009 pren ISO 11137-2 Sterilisering av helsetjenesteprodukter - Stråling - Del 2: Bestemmelse av steriliseringsdose (ISO/DIS 11137-2:2009) Sterilization of health care products - Radiation - Part 2: Establishing the sterilization dose (ISO/DIS 11137-2:2009) Kommentarfrist: 21.10.2009 pren ISO 14160 Sterilization of health care products - Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives - Requirements for characterization, development, validation and routine control of a sterilization process for medical devices (ISO/DIS 14160:2009) Kommentarfrist: 02.09.2009 pren ISO 14602 Ikke-aktive kirurgiske implantater - Implantater til osteosyntese - Spesielle krav (ISO/DIS 14602:2009) Non-active surgical implants - Implants for Osteosynthesis - Particular requirements (ISO/DIS 14602:2009) Kommentarfrist: 02.09.2009 pren ISO 15223-1 Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements (ISO/DIS 15223-1:2009) Kommentarfrist: 28.10.2009 pren ISO 15883-6 Washer-disinfectors - Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, noncritical medical devices and healthcare equipment (ISO/DIS 15883-6:2009) Kommentarfrist: 30.09.2009 pren ISO 24500 Ergonomics - Accessible design - Auditory signals for consumer products (ISO/DIS 24500:2009) Kommentarfrist: 09.09.2009 pren ISO 24502 Ergonomics - Accessible design - Specification of age-related relative luminance in visual signs and displays (ISO/DIS 24502:2009) Kommentarfrist: 04.11.2009 Listenummer: 7/2009 Side: 12 av 170
11 HELSEVESEN, TEKNIKK pren ISO 24503 Ergonomics - Accessible design - Using tactile dots and bars on consumer products (ISO/DIS 24503:2009) Kommentarfrist: 04.11.2009 pren ISO 28319 Dentistry - Laser welding (ISO/DIS 28319:2009) Kommentarfrist: 22.06.2009 Standardforslag til høring - internasjonale (ISO) ISO 8009:2004/DAmd 1 Kommentarfrist: 29.10.2009 ISO 16037:2002/DAmd 1 Kommentarfrist: 29.10.2009 ISO/DIS 4074 Natural rubber latex condoms -- Requirements and test methods Kommentarfrist: 28.10.2009 ISO/DIS 7885 Dentistry -- Sterile injection needles for single use Kommentarfrist: 22.06.2009 ISO/DIS 8637 Cardiovascular implants and artificial organs -- Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators Kommentarfrist: 13.07.2009 ISO/DIS 8638 Cardiovascular implants and artificial organs -- Extracorporeal blood circuit for haemodialysers, haemodiafilters, haemofilters and haemoconcentrators Kommentarfrist: 13.07.2009 ISO/DIS 10271 Dental metallic materials -- Corrosion test methods Kommentarfrist: 30.09.2009 ISO/DIS 10451 Dentistry -- Contents of technical file for dental implant systems Kommentarfrist: 29.07.2009 ISO/DIS 10542-1 Technical systems and aids for disabled or handicapped persons -- Wheelchair tiedown and occupant-restraint systems -- Part 1: Requirements and test methods for all systems Kommentarfrist: 21.09.2009 Listenummer: 7/2009 Side: 13 av 170
11 HELSEVESEN, TEKNIKK ISO/DIS 10936-2.2 Optics and photonics -- Operation microscopes -- Part 2: Light hazard from operation microscopes used in ocular surgery Kommentarfrist: 23.08.2009 ISO/DIS 11137-2 Sterilization of health care products -- Radiation -- Part 2: Establishing the sterilization dose Kommentarfrist: 21.10.2009 ISO/DIS 11137-2 Sterilization of health care products -- Radiation -- Part 2: Establishing the sterilization dose Kommentarfrist: 21.10.2009 ISO/DIS 13960 Cardiovascular implants and artificial organs - Plasmafilters Kommentarfrist: 13.07.2009 ISO/DIS 14160 Sterilization of health care products -- Liquid chemical sterilizing agents for single-use medical devices utilizing animal tissues and their derivatives -- Requirements for characterization, development, validation and routine control of a sterilization process for medical devices Kommentarfrist: 02.09.2009 ISO/DIS 15223-1 Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: 28.10.2009 ISO/DIS 15223-1 Medical devices -- Symbols to be used with medical device labels, labelling and information to be supplied -- Part 1: General requirements Kommentarfrist: 28.10.2009 ISO/DIS 15883-6 Washer-disinfectors -- Part 6: Requirements and tests for washer-disinfectors employing thermal disinfection for non-invasive, noncritical medical devices and healthcare equipment Kommentarfrist: 30.09.2009 ISO/DIS 16038 Rubber condoms -- Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms Kommentarfrist: 04.10.2009 ISO/DIS 16038 Male condoms -- Guidance on the use of ISO 4074 and ISO 23409 in the quality management of natural rubber latex condoms and synthetic condoms Kommentarfrist: 04.10.2009 ISO/DIS 24415-2 Tips for assistive products for walking -- Requirements and test methods -- Part 2: Durability of tips for crutches Kommentarfrist: 03.09.2009 Listenummer: 7/2009 Side: 14 av 170
11 HELSEVESEN, TEKNIKK ISO/DIS 28319 Dentistry -- Laser welding Kommentarfrist: 22.06.2009 ISO/DIS 29701 Nanotechnologies -- Endotoxin test on nanomaterial samples for in vitro systems -- Limulus amebocyte lysate (LAL) test Kommentarfrist: 02.09.2009 ISO/DIS 29941 Condoms -- Determination of nitrosamines migrating from natural rubber latex condoms into various media Kommentarfrist: 21.09.2009 ISO/DIS 29942 Prophylactic dams -- Requirements and test methods Kommentarfrist: 21.09.2009 ISO/DIS 80601-2-61 Medical electrical equipment -- Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use Kommentarfrist: 14.10.2009 ISO/DIS 20857.2 Sterilization of health care products -- Dry heat -- Requirements for the development, validation and routine control of a sterilization process for medical devices Kommentarfrist: 22.06.2009 ISO-standarder ISO 3950:2009 Dentistry -- Designation system for teeth and areas of the oral cavity Erstatter A00008:20:009600 ISO 7711-1:1997/Amd 1:2009 ISO 8536-3:2009 Infusion equipment for medical use -- Part 3: Aluminium caps for infusion bottles Erstatter A00008:20:030260 ISO 10993-5:2009 Biological evaluation of medical devices -- Part 5: Tests for in vitro cytotoxicity Erstatter A00008:20:026211 ISO 11117:2008/Cor 1:2009 ISO 11663:2009 Quality of dialysis fluid for haemodialysis and related therapies Listenummer: 7/2009 Side: 15 av 170
11 HELSEVESEN, TEKNIKK ISO 11712:2009 Anaesthetic and respiratory equipment -- Supralaryngeal airways and connectors ISO 13958:2009 Concentrates for haemodialysis and related therapies Erstatter A00008:20:036455 ISO 13959:2009 Water for haemodialysis and related therapies Erstatter A00008:20:036456 ISO 15193:2009 In vitro diagnostic medical devices -- Measurement of quantities in samples of biological origin -- Requirements for content and presentation of reference measurement procedures Erstatter A00008:20:026305 ISO 15194:2009 In vitro diagnostic medical devices -- Measurement of quantities in samples of biological origin -- Requirements for certified reference materials and the content of supporting documentation Erstatter A00008:20:026306 ISO 26722:2009 Water treatment equipment for haemodialysis applications and related therapies ISO 27427:2009 Anaesthetic and respiratory equipment -- Nebulizing systems and components ISO 81060-2:2009 Non-invasive sphygmomanometers -- Part 2: Clinical validation of automated measurement type ISO/TS 11080:2009 Dentistry -- Essential characteristics of test methods for the evaluation of treatment methods intended to improve or maintain the microbiological quality of dental unit procedural water Rapporter fra CEN (CR) CEN ISO/TS 11135-2:2008 Sterilisering av helsetjenesteprodukter Etylenoksid Del 2: Retningslinjer for anvendelse av ISO 11135-1 (ISO/DTS 11135-2:2008) Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008) CEN ISO/TS 11135-2:2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008/Cor 1:2009) Listenummer: 7/2009 Side: 16 av 170
11 HELSEVESEN, TEKNIKK CEN ISO/TS 17665-2:2009 Sterilisering av helsetjenesteprodukter - Fuktig varme - Del 2: Veiledning for bruk av ISO 17665-1 (ISO/DTS 17665-2:2008) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) CEN/TR 12401:2009 Tannpleie - Veiledning for klassifisering av medisinsk utstyr brukt i tannpleien Dentistry - Guidance on the classification of dental devices and accessories CEN/TR 15753:2008 Emballasje - Pakningsvedlegg til medisiner - Braille og andre skriftformater for synshemmede Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people CEN/TR 15831:2009 Metode for kompresjonsprøving av strømper til medisinsk bruk Method for testing compression in medical hosiery CEN/TS 15209:2008 Følbare overflateindikatorer på belegningsprodukter av betong, tegl og naturstein Tactile paving surface indicators produced from concrete, clay and stone Fastsatte norske standarder NS-EN ISO 8835-3:2009 Systemer for inhalasjonsanestesi - Del 3: Overførings- og opptakssystemer i aktive systemer for fjerning av anestesigass (ISO 8835-3:2007) Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007) NS-EN ISO 8835-5:2009 Systemer for inhalasjonsanestesi - Del 5: Anestesiventilatorer (ISO 8835-5:2004) Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004) NS-EN ISO 10079-1:2009 Medisinsk utstyr til sug - Del 1: Elektrisk drevne sug - Sikkerhetskrav (ISO 10079-1:1999) Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirements (ISO 10079-1:1999) NS-EN ISO 10079-2:2009 Medisinsk utstyr til sug - Del 2: Manuelt drevne sug (ISO 10079-2:1999) Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999) NS-EN ISO 10079-3:2009 Medisinsk utstyr til sug - Del 3: Vakuumsug eller trykkgassdrevne sug (ISO 1079-3:1999) Medical suction equipment - Part 3: Suction equipment powered from a vacuum or pressure source (ISO 10079-3:1999) Listenummer: 7/2009 Side: 17 av 170
11 HELSEVESEN, TEKNIKK NS-EN ISO 11810-2:2009 Lasere og laserrelatert utstyr - Prøvingsmetode og klassifikasjon av laserresistente operasjonsduker og/eller beskyttende pasientvern - Del 2: Sekundær antennelse (ISO 11810-2:2007) Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patientprotective covers - Part 2: Secondary ignition (ISO 11810-2:2007) NS-EN ISO 14534:2009 Øyeoptikk - Kontaklinser og vedlikeholdsutstyr for kontaktlinser - Grunnleggende krav (ISO 14534:2002) Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002) NS-EN ISO 14889:2009 Øyeoptikk - Brilleglass - Grunnleggende krav for ikke-randslipte ferdige brilleglass (ISO 14889:2003) Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2003) NS-EN ISO 17510-1:2009 Åndedrettsterapi ved søvnapné - Del 1: Utstyr til åndedrettsterapi ved søvnapné (ISO 17510-1:2007) Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) NS-EN ISO 17510-2:2009 Åndedrettsterapi ved søvnapné - Del 2: Masker og brukstilbehør (ISO 17510-2:2007) Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007) NS-EN ISO 18369-1:2006/A1:2006 Endringsblad A1 - Oftalmisk optikk - Kontaktlinser - Del 1: Terminologi, klassifiseringssystem og anbefalinger for etikettering av spesifikasjoner (ISO 18369-1:2006/Amd 1:2009) Amendment A1 - Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO 18369-1:2006/Amd 1:2009) NS-EN ISO 18777:2009 Transportable systemer for flytende oksygen til medisinsk bruk - Særskilte krav (ISO 18777:2005) Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005) NS-EN ISO 20795-1:2008/AC:2009 Rettelsesblad AC - Tannpleie - Basepolymerer - Del 1: Polymermaterialer for tannproteser (ISO 20795-1:2008/Cor 1:2009) Corrigendum AC - Dentistry - Base polymers - Part 1: Denture base polymers (ISO 20795-1:2008/Cor 1:2009) NS-EN ISO 21531:2009 Tannpleie - Grafiske symboler for tannpleieinstrumenter (ISO 21531:2009) Dentistry - Graphical symbols for dental instruments (ISO 21531:2009) NS-EN ISO 23328-2:2009 Pustesystemfiltre til anestesi- og respirasjonsbruk - Del 2: Andre aspekter enn filtrasjon (ISO 23328-2:2002) Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) NS-EN ISO 23747:2009 Anestesi- og respirasjonsutstyr - Ekspiratoriske toppstrømshastighetsmålere for vurdering av spontan lungefunksjon (ISO 23747:2007) Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007) Listenummer: 7/2009 Side: 18 av 170
11 HELSEVESEN, TEKNIKK Tilbaketrukne norske standarder NS-EN ISO 8835-3:2007 Systemer for inhalasjonsanestesi - Del 3: Overførings- og opptakssystemer i aktive systemer for fjerning av anestesigass (ISO 8835-3:2007) Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007) NS-EN ISO 8835-5:2004 Systemer for inhalasjonsanestesi - Del 5: Anestesiventilatorer (ISO 8835-5:2004) - (innbefattet rettelsesblad AC:2004 og AC:2006) Inhalational anaesthesia systems - Part 5: Anaesthesia ventilators (ISO 8835-5:2004) - (Corrigendum AC:2004 and AC:2006 incorporated) NS-EN ISO 8835-5:2004/AC:2006 Rettelsesblad AC - Systemer for inhalasjonsanestesi - Del 5: Anestesiventilatorer (ISO 8835-5:2004) Corrigendum AC - Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004) NS-EN ISO 10079-1:1999 Medisinsk utstyr til sug - Del 1: Elektrisk drevne sug - Sikkerhetskrav (ISO 10079-1:1999) Medical suction equipment - Part 1: Electrically powered suction equipment - Safety requirement (ISO 10079-1:1999) NS-EN ISO 10079-2:1999 Medisinsk utstyr til sug - Del 2: Manuelt drevne sug (ISO 10079-2:1999) Medical suction equipment - Part 2: Manually powered suction equipment (ISO 10079-2:1999) NS-EN ISO 10079-3:1999 Medisinsk utstyr til sug - Del 3: Vakuumsug- eller trykkgassdrevne sug (ISO 10079-3:1999) Medical suction equipment - Part 3: Suction equipment powered from vacuum or pressure sourc (ISO 10079-3:1999) NS-EN ISO 11810-2:2007 Lasere og laserrelatert utstyr - Prøvingsmetoder og klassifikasjon av laserresistente operasjonsduker og/eller beskyttende pasientvern - Del 2: Sekundær antennelse (ISO 11810-2:2007) Lasers and laser-related equipment - Test method and classification for the laser-resistance of surgical drapes and/or patientprotective covers - Part 2: Secondary ignition (ISO 11810-2:2007) NS-EN ISO 14534:2002 Øyeoptikk - Kontaklinser og vedlikeholdsutstyr for kontaktlinser - Grunnleggende krav (ISO 14534:2002) Ophthalmic optics - Contact lenses and contact lens care products - Fundamental requirements (ISO 14534:2002) Listenummer: 7/2009 Side: 19 av 170
11 HELSEVESEN, TEKNIKK NS-EN ISO 14889:2003 Øyeoptikk - Brilleglass - Grunnleggende krav for ikke-randslipte ferdige brilleglass (ISO 14889:2003) Ophthalmic optics - Spectacle lenses - Fundamental requirements for uncut finished lenses (ISO 14889:2003) NS-EN ISO 17510-1:2007 Åndedrettsterapi ved søvnapné - Del 1: Utstyr til åndedrettsterapi ved søvnapné (ISO 17510-1:2007) Sleep apnoea breathing therapy - Part 1: Sleep apnoea breathing therapy equipment (ISO 17510-1:2007) NS-EN ISO 17510-2:2007 Åndedrettsterapi ved søvnapné - Del 2: Masker og brukstilbehør (ISO 17510-2:2007) Sleep apnoea breathing therapy - Part 2: Masks and application accessories (ISO 17510-2:2007) NS-EN ISO 18777:2005 Transportable systemer for flytende oksygen til medisinsk bruk - Særlige krav (ISO 18777:2005) Transportable liquid oxygen systems for medical use - Particular requirements (ISO 18777:2005) NS-EN ISO 23328-2:2008 Pustesystemfiltre til anestesi- og respirasjonsbruk - Del 2: Andre aspekter enn filtrasjon (ISO 23328-2:2002) Breathing system filters for anaesthetic and respiratory use - Part 2: Non-filtration aspects (ISO 23328-2:2002) NS-EN ISO 23747:2007 Anestesi- og respirasjonsutstyr - Ekspiratoriske toppstrømshastighetsmålere for vurdering av lungefunksjon ved spontan pust hos mennesker (ISO 23747:2007) Anaesthetic and respiratory equipment - Peak expiratory flow meters for the assessment of pulmonary function in spontaneously breathing humans (ISO 23747:2007) 13 MILJØVERN. HELSEVERN. SIKKERHET Standardforslag til høring - europeiske (CEN) pren 54-3 Brannalarmanlegg - Del 3: Brannalarmutstyr - Akustisk alarmorgan Fire detection and fire alarm systems - Part 3: Fire alarm devices - Sounders Kommentarfrist: 12.08.2009 pren 54-30 Fire detection and fire alarm systems - Part 30: Multi-sensor fire detectors - Point detectors using a combination of carbon monoxide and heat sensors Kommentarfrist: 12.08.2009 Listenummer: 7/2009 Side: 20 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET pren 54-12 Brannalarmanlegg - Del 12: Røykdetektorer - Optiske strålelinjedetektorer Fire detection and fire alarm systems - Part 12: Smoke detectors - Line detectors using an optical beam Kommentarfrist: 02.09.2009 pren 795 Personal fall protection equipment - Anchor devices Kommentarfrist: 21.10.2009 pren 1127-1 Eksplosive omgivelser - Eksplosjonsforebyggelse og -vern - Del 1: Grunnleggende begreper og metodikk Explosive atmospheres - Explosion prevention and protection - Part 1: Basic concepts and methodology Kommentarfrist: 19.08.2009 pren 1948-4 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 4: Sampling and analysis of dioxin-like PCBs Kommentarfrist: 09.09.2009 pren 12816 LPG equipment and accessories - Transportable refillable LPG cylinders - Disposal Kommentarfrist: 23.09.2009 pren 13463-5 Ikke-elektrisk utstyr for potensielle eksplosive omgivelser - Del 5: Beskyttelse gjennom sikker konstruksjon Non-electrical equipment intended for use in potentially explosive atmospheres - Part 5: Protection by constructional safety 'c' Kommentarfrist: 19.08.2009 pren 13772 Tekstiler og tekstilprodukter - Brannegenskaper - Gardiner og draperier - Måling av flammespredning av vertikalt orienterte prøvelegemer med stor antennelseskilde Textiles and textile products - Burning behaviour - Curtains and drapers - Measurement of flame spread of vertically oriented specimens with large ignition source Kommentarfrist: 23.09.2009 pren 15080-13 Extended application of results from fire resistance tests - Part 13: Load bearing columns Kommentarfrist: 07.10.2009 pren 15254-7 Extended application of results from fire resistance tests - Non-loadbearing walls - Part 7: Non-load bearing sandwich panels - Ceilings Kommentarfrist: 07.10.2009 pren 15269-2 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 2: Fire resistance of hinged and pivoted steel doorsets Kommentarfrist: 16.09.2009 Listenummer: 7/2009 Side: 21 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET pren 15910 Water quality - Guidance on the estimation of fish abundance with mobile hydroacoustic methods Kommentarfrist: 05.08.2009 pren 15933 Soil, sludge, and treated biowaste - Determination of ph Kommentarfrist: 09.09.2009 pren 15934 Soil, sludge, waste, and treated biowaste - Determination of dry matter - Gravimetric method Kommentarfrist: 09.09.2009 pren 15935 Soil, sludge, waste, and treated biowaste - Determination of loss on ignition Kommentarfrist: 09.09.2009 pren 15936 Soil, sludge, waste, and treated biowaste - Determination of total organic carbon (TOC) by dry combustion Kommentarfrist: 09.09.2009 pren 15937 Soil, sludge, and treated biowaste - Determination of specific electrical conductivity Kommentarfrist: 09.09.2009 pren 15949 Safety of machinery - Safety requirements for bar mills, structural steel mills and wire rod mills Kommentarfrist: 14.10.2009 pren ISO 4007 Personal protective equipment - Eye and face protection - Vocabulary (ISO/DIS 4007:2009) Kommentarfrist: 29.07.2009 pren ISO 5667-13 Water quality - Sampling - Part 13: Guidance on sampling of sludges from sewage and water-treatment works (ISO/DIS 5667-13:2009) Kommentarfrist: 02.09.2009 pren ISO 5667-23 Water quality - Sampling - Part 23: Determination of priority pollutants in surface water using passive sampling (ISO/DIS 5667-23:2009) Kommentarfrist: 26.08.2009 pren ISO 7887 Vannundersøkelse - Bestemmelse av farge (ISO/DIS 7887:2009) Water quality - Examination and determination of colour (ISO/DIS 7887:2009) Kommentarfrist: 26.08.2009 Listenummer: 7/2009 Side: 22 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET pren ISO 9241-129 Ergonomics of human-system interaction - Part 129: Guidance on individualization (ISO/DIS 9241-129:2009) Kommentarfrist: 19.08.2009 pren ISO 12100 Safety of machinery - General principles for design, risk assessment and risk reduction (ISO/DIS 12100:2009) Kommentarfrist: 19.07.2009 pren ISO 20344 Personlig verneutstyr - Prøvingsmetoder for fottøy (ISO/DIS 20344:2009) Personal protective equipment - Test methods for footwear (ISO/DIS 20344:2009) Kommentarfrist: 16.09.2009 pren ISO 20345 Personlig verneutstyr - Sikkerhetsfottøy (ISO/DIS 20345:2009) Personal protective equipment - Safety footwear (ISO/DIS 20345:2009) Kommentarfrist: 16.09.2009 pren ISO 20346 Personlig verneutstyr - Beskyttende fottøy (ISO/DIS 20346:2009) Personal protective equipment - Protective footwear (ISO/DIS 20346:2009) Kommentarfrist: 16.09.2009 pren ISO 20347 Personlig verneutstyr - Arbeidsfottøy (ISO/DIS 20347:2009) Personal protective equipment - Occupational footwear (ISO/DIS 20347:2009) Kommentarfrist: 16.09.2009 pren ISO 22868 Skog- og hagemaskiner - Støy prøving for bærbare håndholdte maskiner med forbrenningsmotor - Teknisk metode (klasse 2 nøyaktighet) (ISO/DIS 22868:2009) Forestry and garden machinery - Noise test code for portable hand-held machines with internal combustion engine - Engineering method (Grade 2 accuracy) (ISO/DIS 22868:2009) Kommentarfrist: 07.10.2009 pren ISO 24500 Ergonomics - Accessible design - Auditory signals for consumer products (ISO/DIS 24500:2009) Kommentarfrist: 09.09.2009 pren ISO 24502 Ergonomics - Accessible design - Specification of age-related relative luminance in visual signs and displays (ISO/DIS 24502:2009) Kommentarfrist: 04.11.2009 pren ISO 24503 Ergonomics - Accessible design - Using tactile dots and bars on consumer products (ISO/DIS 24503:2009) Kommentarfrist: 04.11.2009 Listenummer: 7/2009 Side: 23 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET pren ISO 25139 Stationary source emissions - Manual method for the determination of the methane concentration using gas chromatography (ISO/DIS 25139:2009) Kommentarfrist: 04.11.2009 Standardforslag til høring - internasjonale (ISO) ISO/DIS 5667-13 Water quality -- Sampling -- Part 13: Guidance on sampling of sludges from sewage and water-treatment works Kommentarfrist: 02.09.2009 ISO/DIS 5667-22 Water quality -- Sampling -- Part 22: Guidance on the design and installation of groundwater monitoring points Kommentarfrist: 24.08.2009 ISO/DIS 5667-23 Water quality -- Sampling -- Part 23: Determination of priority pollutants in surface water using passive sampling Kommentarfrist: 26.08.2009 ISO/DIS 7827 Water quality -- Evaluation of the "ready", "ultimate" aerobic biodegradability of organic compounds in an aqueous medium -- Method by analysis of dissolved organic carbon (DOC) Kommentarfrist: 06.08.2009 ISO/DIS 7887 Water quality -- Examination and determination of colour Kommentarfrist: 23.08.2009 ISO/DIS 9241-129 Ergonomics of human-system interaction -- Part 129: Guidance on individualization Kommentarfrist: 19.08.2009 ISO/DIS 11349 Water quality -- Determination of lipophilic substances of low volatility -- Gravimetric method Kommentarfrist: 30.07.2009 ISO/DIS 11704 Water quality -- Measurement of gross alpha and beta activity concentration in non-saline water -- Liquid scintillation counting method Kommentarfrist: 20.07.2009 ISO/DIS 12100 Safety of machinery - General principles for design, risk assessment and risk reduction Kommentarfrist: 19.07.2009 ISO/DIS 14934-1 Fire tests -- Calibration and use of heat-flux meters -- Part 1: General principles Kommentarfrist: 29.06.2009 Listenummer: 7/2009 Side: 24 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET ISO/DIS 17736 Workplace air quality -- Determination of isocyanate in air using a double-filter sampling device and analysis by high pressure liquid chromatography Kommentarfrist: 03.08.2009 ISO/DIS 19703 Produksjon og analyse av toksiske gasser fra brann Beregning av typer og mengder, likevektsforhold og forbrennings effekt i eksperimentelle branner Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires Kommentarfrist: 25.06.2009 ISO/DIS 19703 Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires Kommentarfrist: 25.06.2009 ISO/DIS 21338 Water quality -- Kinetic determination of the inhibitory effects of sediment, other solids and coloured samples on the light emission of Vibrio fischeri (kinetic luminescent bacteria test) Kommentarfrist: 10.07.2009 ISO/DIS 21438-3 Workplace atmospheres -- Determination of inorganic acids by ion chromatography -- Part 3: Hydrofluoric acid and particulate fluorides Kommentarfrist: 30.07.2009 ISO/DIS 22155 Soil quality -- Gas chromatographic quantitative determination of volatile aromatic and halogenated hydrocarbons and selected ethers -- Static headspace method Kommentarfrist: 02.07.2009 ISO/DIS 22155 Soil quality -- Gas chromatographic determination of volatile aromatic and halogenated hydrocarbons and selected ethers -- Static headspace method Kommentarfrist: 02.07.2009 ISO/DIS 22868 Portable hand-held forestry machines with an internal combustion engine -- Determination of A-weighted sound pressure levels at the operator's ears, and the sound power level -- Engineering method (grade 2) Kommentarfrist: 07.10.2009 ISO/DIS 23269-4 Ships and marine technology -- Breathing apparatus for ships -- Part 4: Self-contained breathing apparatus for emergency escape required by the IMO IBC and IGC Codes Kommentarfrist: 26.06.2009 ISO/DIS 28439 Workplace atmospheres -- Characterization of ultrafine aerosols/nanoaerosols -- Determination of the size distribution and number concentration using differential mobility analysing systems Kommentarfrist: 14.10.2009 Listenummer: 7/2009 Side: 25 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET ISO/DIS 29042-5 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet Kommentarfrist: 12.08.2009 ISO/DIS 29042-6 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet Kommentarfrist: 12.08.2009 ISO/DIS 29042-7 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter Kommentarfrist: 12.08.2009 ISO/DIS 29441 Water quality -- Determination of total nitrogen after UV digestion -- Method using flow analysis (CFA and FIA) and spectrometric detection Kommentarfrist: 13.07.2009 ISO/DIS 30011 Workplace air -- Determination of metals and metalloids in airborne particulate matter by inductively coupled plasma mass spectrometry Kommentarfrist: 30.07.2009 ISO-standarder ISO 389-9:2009 Acoustics -- Reference zero for the calibration of audiometric equipment -- Part 9: Preferred test conditions for the determination of reference hearing threshold levels ISO 5667-11:2009 Water quality -- Sampling -- Part 11: Guidance on sampling of groundwaters Erstatter A00008:20:011774,A00008:20:029025 ISO 7240-11:2005/Amd 1:2009 ISO 12100-1:2003/Amd 1:2009 ISO 12100-2:2003/Amd 1:2009 ISO 14696:2009 Reaction-to-fire tests -- Determination of fire and thermal parameters of materials, products and assemblies using an intermediatescale calorimeter (ICAL) Erstatter A00008:20:024190 Listenummer: 7/2009 Side: 26 av 170
13 MILJØVERN. HELSEVERN. SIKKERHET ISO 15767:2009 Workplace atmospheres -- Controlling and characterizing uncertainty in weighing collected aerosols Erstatter A00008:20:027988 ISO 16000-14:2009 Indoor air -- Part 14: Determination of total (gas and particle-phase) polychlorinated dioxin-like biphenyls (PCBs) and polychlorinated dibenzo-p-dioxins/dibenzofurans (PCDDs/PCDFs) -- Extraction, clean-up and analysis by high-resolution gas chromatography and mass spectrometry ISO 16586:2003/Cor 1:2009 Rapporter fra CEN (CR) CEN ISO/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) CEN/TR 12101-4:2009 Brannventilasjonssystemer - Del 4: Installerte røykventilasjonsanlegg Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation CEN/TR 12566-5:2008 Små renseanlegg for inntil 50 PE - Del 5: Filtreringsanlegg for forbehandlet avløpsvann Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems CEN/TR 13688:2008 Denne skal ikke ha norsk tittel Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling CEN/TR 14383-2:2007 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 2: Byplanlegging Prevention of crime - Urban planning and building design - Part 2: Urban planning CEN/TR 14520:2007 Emballasje - Gjenbruk - Metode for vurdering av gjenbrukssystemets prestasjonsevne Packaging - Reuse - Methods for assessing the performance of a reuse system CEN/TR 15276-1:2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 1: Krav og prøvingsmetoder for komponenter Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components CEN/TR 15276-2:2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 2: Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance Listenummer: 7/2009 Side: 27 av 170