Annonseringsdato: 2012-12-21 Listenummer: 12/2012 Standardiseringsprosjekter og nye standarder Listenummer: 12/2012 Side: 1 av 119
00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - internasjonale (ISO) ISO/DIS 965-1 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data (Revision of second edition (ISO 965-1:1980)) Kommentarfrist: 09.02.2013 ISO/DIS 9308-1 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method (Revision of first edition (ISO 9308-1:1990) Kommentarfrist: 15.04.2013 ISO/DIS 10790 Measurement of fluid flow in closed conduits -- Coriolis mass flowmeters Kommentarfrist: 24.02.2013 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 8044:1999/prA1 Korrosjon av metaller og legeringer - Grunnleggende termer og definisjoner - Endringsblad 1 (ISO 8044:1999/DAM 1:2012) Corrosion of metals and alloys - Basic terms and definitions - Amendment 1 (ISO 8044:1999/DAM 1:2012) Kommentarfrist: 18.03.2013 pren ISO 2692 Geometriske produktspesifikasjoner (GPS) - Geometriske toleranser - Maksimum materialkrav (MMR), minste materielle krav (LMR) og gjensidighet krav (RPR) (ISO/DIS 2692:2012) Geometrical product specifications (GPS) - Geometrical tolerancing - Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) (ISO/DIS 2692:2012) Kommentarfrist: 26.12.2012 Standardforslag til høring - internasjonale (ISO) ISO 3040:2009/DAmd 1 Kommentarfrist: 02.01.2013 ISO/DIS 2692 Geometrical Product Specification (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR) and least material requirement (LMR) Kommentarfrist: 26.12.2012 ISO/DIS 2692 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Maximum material requirement (MMR), least material requirement (LMR) and reciprocity requirement (RPR) Kommentarfrist: 23.12.2012 Listenummer: 12/2012 Side: 2 av 119
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 2789 Information and documentation -- International library statistics Kommentarfrist: 11.01.2013 ISO/DIS 13316 Terminology for doors and windows Kommentarfrist: 03.03.2013 ISO/DIS 13611 Interpreting -- Guidelines for community interpreting Kommentarfrist: 24.01.2013 ISO/DIS 16792 Technical product documentation -- Digital product definition data practices Kommentarfrist: 25.03.2013 ISO/DIS 16792 Technical product documentation -- Digital product definition data practices Kommentarfrist: 24.03.2013 ISO/DIS 55000 Asset management -- Overview,principlesandterminology Kommentarfrist: 04.04.2013 ISO-standarder ISO 1382:2012 Rubber -- Vocabulary Erstatter A00008:20:042042 ISO 3857-4:2012 Compressors, pneumatic tools and machines -- Vocabulary -- Part 4: Air treatment ISO 7010:2011/Amd 3:2012 Erstatter A00008:20:057858,A00008:20:057882,A00008:20:057883,A00008:20:057884,A00008:20:057885,A00008:20:057886 ISO 10628-2:2012 Diagrams for the chemical and petrochemical industry -- Part 2: Graphical symbols Erstatter A00008:20:018721 ISO 11532:2012 Aircraft ground equipment -- Graphical symbols ISO 18542-1:2012 Road vehicles -- Standardized repair and maintenance information (RMI) terminology -- Part 1: General information and use case definition Listenummer: 12/2012 Side: 3 av 119
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/TR 17068:2012 Information and documentation - Trusted third party repository for digital records ISO/TS 9250-1:2012 Earth-moving machinery -- Multilingual listing of equivalent terms -- Part 1: General Erstatter A00008:20:035097 ISO/TS 9250-2:2012 Earth-moving machinery -- Multilingual listing of equivalent terms -- Part 2: Performance and dimensions Erstatter A00008:20:035098 ISO/TS 15696:2012 Cranes -- List of equivalent terms Erstatter A00008:20:028750 Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Fastsatte norske standarder NS-EN 9300-003:2012 Aerospace series - LOTAR - Long term archiving and retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 003: Fundamentals and concepts NS-EN 14487-1:2005+NA:2012 Sprøytebetong - Del 1: Definisjoner, spesifikasjoner og samsvar Sprayed concrete - Part 1: Definitions, specifications and conformity NS-EN 14487-1:2005+NA:2012 Sprøytebetong - Del 1: Definisjoner, spesifikasjoner og samsvar Sprayed concrete - Part 1: Definitions, specifications and conformity Språk: no Listenummer: 12/2012 Side: 4 av 119
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 16214-1:2012 Bærekraftkriterier for produksjon av biodrivstoff og flytende biobrensel til energianvendelser - Prinsipper, kriterier, indikatorer og påvisere - Del 1: Terminologi Sustainability criteria for the production of biofuels and bioliquids for energy applications - Principles, criteria, indicators and verifiers - Part 1: Terminology NS-EN 16256-1:2012 Pyrotekniske artikler - Pyrotekniske artikler for teaterbruk - Del 1: Terminologi Pyrotechnic articles - Theatrical pyrotechnic articles - Part 1: Terminology NS-EN 16261-1:2012 Pyrotekniske artikler - Fyrverkeri, kategori 4 - Del 1: Terminologi Pyrotechnic articles - Fireworks, category 4 - Part 1: Terminology NS-EN ISO 6165:2012 Masseforflytningsmaskiner - Grunntyper - Identifikasjon og termer og definisjoner (ISO 6165:2012) Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2012) NS-EN ISO 11979-1:2012 Oftalmiske implantater - Intraokulære linser - Del 1: Terminologi (ISO 11979-1:2012) Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2012) Tilbaketrukne norske standarder NS-EN 1402-1:2003 Ikke-formede ildfaste produkter - Del 1: Orientering og klassifisering Unshaped refractory products - Part 1: Introduction and classification NS-EN 14487-1:2005 Sprøytebetong - Del 1: Definisjoner, spesifikasjoner og samsvar Sprayed concrete - Part 1: Definitions, specifications and conformity NS-EN ISO 6165:2006 Masseforflytningsmaskiner - Basistyper - Identifikasjon og termer og definisjoner (ISO 6165:2006) Earth-moving machinery - Basic types - Identification and terms and definitions (ISO 6165:2006) NS-EN ISO 11979-1:2006 Oftalmiske implantater - Intraokulære linser - Del 1: Terminologi (ISO 11979-1:2006) Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2006) Listenummer: 12/2012 Side: 5 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 15628 Maintenance - Qualification of maintenance personnel Kommentarfrist: 06.05.2013 pren 16247-2 Energirevisjoner - Del 2: Bygninger Energy audits - Part 2: Buildings Kommentarfrist: 25.02.2013 pren 16247-3 Energirevisjoner - Del 3: Prosesser Energy audits - Part 3: Processes Kommentarfrist: 25.02.2013 pren 16247-4 Energirevisjoner - Del 4: Transport Energy audits - Part 4: Transport Kommentarfrist: 25.02.2013 pren 16489-1 Professional indoor sun exposure services - Part 1: Requirements for the provision of training Kommentarfrist: 20.02.2013 pren 16494 Railway applications - Requirements for ERTMS Trackside Boards Kommentarfrist: 22.04.2013 pren 16495 Air Traffic Management - Information security for organisations supporting civil aviation operations Kommentarfrist: 11.03.2013 pren ISO 24801-1 Recreational diving services - Requirements for the training of recreational scuba divers - Part 1: Level 1 - Supervised diver (ISO/DIS 24801-1:2012) Kommentarfrist: 25.02.2013 pren ISO 24801-2 Recreational diving services - Requirements for the training of recreational scuba divers - Part 2: Level 2 - Autonomous diver (ISO/DIS 24801-2:2012) Kommentarfrist: 25.02.2013 pren ISO 24801-3 Recreational diving services - Requirements for the training of recreational scuba divers - Part 3: Level 3 - Dive leader (ISO/DIS 24801-3:2012) Kommentarfrist: 25.02.2013 Listenummer: 12/2012 Side: 6 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren ISO 24802-1 Recreational diving services - Requirements for the training of scuba instructors - Part 1: Level (ISO/DIS 24802-1:2012) Kommentarfrist: 25.02.2013 pren ISO 24802-2 Recreational diving services - Requirements for the training of scuba instructors - Part 2: Level 2 (ISO/DIS 24802-2:2012) Kommentarfrist: 25.02.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 14785 Tourist information offices -- Tourist information and reception services -- Requirements Kommentarfrist: 13.01.2013 ISO/DIS 16269-6 Statistical interpretation of data -- Part 6: Determination of statistical tolerance intervals Kommentarfrist: 04.02.2013 ISO/DIS 21101 Adventure tourism -- Safety management systems -- Requirements Kommentarfrist: 22.01.2013 ISO/DIS 21103 Adventure tourism -- Information to participants -- Minimum requirements before, during and after the adventure tourism activity Kommentarfrist: 22.01.2013 ISO/DIS 24801-1 Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 1: Level 1 -- Supervised diver Kommentarfrist: 25.02.2013 ISO/DIS 24801-1 Recreational diving services -- Requirements for the training of recreational scuba divers -- Part 1: Level 1 -- Supervised diver Kommentarfrist: 24.02.2013 ISO/DIS 24801-2 Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 2: Level 2 -- Autonomous diver Kommentarfrist: 25.02.2013 ISO/DIS 24801-2 Recreational diving services -- Requirements for the training of recreational scuba divers -- Part 2: Level 2 -- Autonomous diver Kommentarfrist: 24.02.2013 ISO/DIS 24801-3 Recreational diving services -- Safety related minimum requirements for the training of recreational scuba divers -- Part 3: Level 3 -- Dive leader Kommentarfrist: 25.02.2013 Listenummer: 12/2012 Side: 7 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 24801-3 Recreational diving services -- Requirements for the training of recreational scuba divers -- Part 3: Level 3 -- Dive leader Kommentarfrist: 24.02.2013 ISO/DIS 24802-1 Recreational diving services -- Safety related minimum requirements for the training of scuba instructors -- Part 1: Level 1 Kommentarfrist: 25.02.2013 ISO/DIS 24802-1 Recreational diving services -- Requirements for the training of scuba instructors -- Part 1: Level 1 Kommentarfrist: 24.02.2013 ISO/DIS 24802-2 Recreational diving services -- Safety related minimum requirements for the training of scuba instructors -- Part 2: Level 2 Kommentarfrist: 25.02.2013 ISO/DIS 24802-2 Recreational diving services -- Requirements for the training of scuba instructors -- Part 2: Level 2 Kommentarfrist: 24.02.2013 ISO/DIS 55000 Asset management -- Overview,principlesandterminology Kommentarfrist: 04.04.2013 ISO/DIS 55001 Asset management -- Requirements Kommentarfrist: 04.04.2013 ISO/DIS 55002 Asset management -- Guidelines on the application of ISO 55001 Kommentarfrist: 04.04.2013 ISO-standarder ISO/TR 26999:2012 Intelligent transport systems -- Systems architecture -- Use of process-oriented methodology in ITS International Standards and other deliverables Rapporter fra CEN (CR) CEN ISO/TS 13140-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) Listenummer: 12/2012 Side: 8 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) CEN ISO/TS 13143-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) CEN ISO/TS 13143-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 2: Abstract test suite (ISO/TS 13143-2:2011) CEN ISO/TS 16401-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) CEN ISO/TS 16401-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) CEN ISO/TS 16403-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) CEN ISO/TS 16403-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO/TS 16403-2:2012) CEN ISO/TS 16407-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TDS 16407-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) CEN ISO/TS 16407-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) CEN ISO/TS 16410-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TDS 16410-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) Listenummer: 12/2012 Side: 9 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 16410-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) CEN ISO/TS 17444-1:2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS 17444-1:2012) CEN ISO/TS 17575-3:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) CEN ISO/TS 17575-4:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) CEN ISO/TS 18234-2:2006 Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF) (ISO/TS 18234-2:2006) CEN ISO/TS 18234-5:2006 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006) CEN ISO/TS 29001:2011 Petroleumsindustri, petrokjemisk industri og naturgassindustri - Sektorspesifikk system for kvalitetsstyring - Krav til produkt og service forsyningsorganisasjoner (ISO/DTS 29001:2010) Petroleum, petrochemical and natural gas industries - Sector-specific quality management systems - Requirements for product and service supply organizations (ISO/TS 29001:2010) CEN/TR 14142-2:2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions CEN/TR 16092:2011 Electronic fee collection - Requirements for pre-payment systems Electronic fee collection - Requirements for pre-payment systems CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC 17024 for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete Listenummer: 12/2012 Side: 10 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15121-1:2011 Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations CEN/TS 15121-2:2011 Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - EPCM Service CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission CEN/TS 15844-1:2010 Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary CEN/TS 15844-2:2010 Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification CEN/TS 15844-3:2010 Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification CEN/TS 15844-4:2010 Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats CEN/TS 15844-5:2010 Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems Listenummer: 12/2012 Side: 11 av 119
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Fastsatte norske standarder NS-EN ISO 13485:2012/AC:2012 Rettelsesblad AC - Medisinsk utstyr - Systemer for kvalitetsstyring - Krav for å oppfylle regelverk (ISO 13485:2003+Cor 1:2009) Corrigendum AC - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003+Cor 1:2009) NS-EN ISO 17261:2012 Intelligente transportsystemer - Automatisk kjøretøy- og utstyrsidentifisering - Arkitektur og terminologi for intermodal godstransport (ISO 17261:2012) Intelligent transport systems - Automatic vehicle and equipment identification - Intermodal goods transport architecture and terminology (ISO 17261:2012) NS-EN ISO/IEC 17065:2012 Samsvarsvurdering - Krav til sertifiseringsorganer for produkter, prosesser og tjenester (ISO/IEC 17065:2012) Conformity assessment - Requirements for bodies certifying products, processes and services (ISO/IEC 17065:2012) NS-ISO 20121:2012 Ledelsessystemer for bærekraftige arrangementer - Krav og veiledning Event sustainability management systems - Requirements with guidance for use NS-ISO 20121:2012 Ledelsessystemer for bærekraftige arrangementer - Krav og veiledning Event sustainability management systems - Requirements with guidance for use Språk: no Oversettelser av tidligere fastsatte norske standarder NS-ISO 26000:2010 Veiledning om samfunnsansvar Guidance on social responsibility Språk: no Tilbaketrukne norske standarder NS-EN 45011:1998 Generelle krav til organer som har systemer for produktsertifisering (ISO/IEC Guide 65) General requirements for bodies operating product certification systems (ISO/IEC Guide 65) Språk: no/en 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren 16493 Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys Kommentarfrist: 15.04.2013 Listenummer: 12/2012 Side: 12 av 119
07 Matematikk. Naturvitenskap pren ISO 9308-1 rev Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO/DIS 9308-1:2012) Kommentarfrist: 15.04.2013 pren ISO 11133 Fôr-, vann- og næringsmiddelmikrobiologi - Forberedelse, produksjon, lagring og kontroll av dyrkningsmedier (ISO/DIS 11133:2012) Microbiology of food, animal feeding stuffs and water - Preparation, production, storage and performance testing of culture media (ISO/DIS 11133:2012) Kommentarfrist: 26.12.2012 pren ISO 17994 Vannundersøkelse - Krav til sammenligning av relativ gjenvinning av mikroorganismer ved to kvantitative metoder Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO/DIS 17994:2012) Kommentarfrist: 25.02.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 9308-1 Water quality -- Enumeration of Escherichia coli and coliform bacteria -- Part 1: Membrane filtration method for waters with low bacterial background flora Kommentarfrist: 14.04.2013 ISO/DIS 11133 Microbiology of food, animal feed and water -- Preparation, production, storage and performance testing of culture media Kommentarfrist: 26.12.2012 ISO/DIS 17994 Water quality -- Criteria for establishing the equivalency of two microbiological methods Kommentarfrist: 25.02.2013 ISO/DIS 17994 Water quality -- Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods Kommentarfrist: 24.02.2013 ISO-standarder ISO/TS 6579-2:2012 Microbiology of food and animal feed -- Horizontal method for the detection, enumeration and serotyping of Salmonella -- Part 2: Enumeration by a miniaturized most probable number technique ISO/TS 12025:2012 Nanomaterials -- Quantification of nano-object release from powders by generation of aerosols ISO/TS 12869:2012 Water quality -- Detection and quantification of Legionella spp. and/or Legionella pneumophila by concentration and genic amplification by quantitative polymerase chain reaction (qpcr) Listenummer: 12/2012 Side: 13 av 119
07 Matematikk. Naturvitenskap ISO/TS 12901-1:2012 Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 1: Principles and approaches ISO/TS 13136:2012 Microbiology of food and animal feed -- Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens -- Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, ISO/TS 14101:2012 Surface characterization of gold nanoparticles for nanomaterial specific toxicity screening: FT-IR method Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS 6579-2:2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS 6579-2:2012) CEN ISO/TS 10272-3:2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 11133-2:2003/A1:2011 Fôr- og næringsmiddelmikrobiologi - Retningslinjer for produksjon av dyrkingsmedier - Del 2: Praktiske retningslinjer for kontroll av dyrkingsmedier - Endringsblad 1: Test mikroorganismer for vanlige dyrkningsmedier (ISO/TS 11133-2:2003/AMD 1:2011) Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 2: Practical guidelines on performance testing of culture media - Amendment 1: Test microorganisms for commonly used culture media (ISO/TS 11133-2:2003/AMD 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS 13830:2011 Veiledning om merking av produserte nano objekter og produkter som inneholder produserte nano objekter (ISO/TS 13830:2011) Guidance on the labelling of manufactured nano-objects and products containing manufactured nano-objects (ISO/TS 13830:2011) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Listenummer: 12/2012 Side: 14 av 119
07 Matematikk. Naturvitenskap CEN/TR 15449-1:2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR 15449-2:2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR 15449-3:2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TS 15634-2:2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Tilbaketrukne norske standarder NS-EN ISO 6579:2002 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for påvisning av Salmonella spp (ISO 6579:2002) - (innbefattet rettelsesblad AC:2006) Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp (ISO 6579:2002) - (Corrigendum AC:2006 incorporated) NS-EN ISO 6579:2002/A1:2007 Endringsblad A1 - Fôr- og næringsmiddelmikrobiologi - Horisontal metode for påvisning av Salmonella spp. - Tillegg D: Påvisning av Salmonella spp. i avføring fra dyr og i prøver fra primærproduksjonsstadiet (ISO 6579:2002/Amd 1: 2007) Amendment A1 - Microbiology of food and animal feeding stuffs - Horizontal method for the detection of Salmonella spp. - Annex D: Detection of Salmonella spp. in animal faeces and in environmental samples from the primary production stage (ISO 6579:2002/Amd 1:2007) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) pren 13718-2 Ambulanser og ambulanseutstyr - Luftambulanser - Del 2: Operasjonelle og tekniske krav til luftambulanser Medical vehicles and their equipment - Air ambulances - Part 2: Operational and technical requirements of air ambulances Kommentarfrist: 16.01.2013 pren ISO 5359 rev Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases (ISO/DIS 5359:2012) Kommentarfrist: 25.03.2013 Listenummer: 12/2012 Side: 15 av 119
11 Helsevesen, Teknikk pren ISO 10343 rev Ophthalmic instruments - Ophthalmometers (ISO/DIS 10343:2012) Kommentarfrist: 06.05.2013 pren ISO 11140-1 Sterilisering av helsetjenesteprodukter - Kjemiske indkatorer - Del 1: Generelle krav (ISO/DIS 11140-1:2012) Sterilization of health care products - Chemical indicators - Part 1: General requirements (ISO/DIS 11140-1:2012) Kommentarfrist: 16.01.2013 pren ISO 16635-2 Dentistry - Dental rubber dam technique - Part 2: Clamp forceps (ISO/DIS 16635-2:2012) Kommentarfrist: 06.05.2013 pren ISO 18082 rev Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases (ISO/DIS 18082:2012) Kommentarfrist: 25.03.2013 pren ISO 80601-2-69 rev Medical Electrical Equipment - Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment (ISO/DIS 80601-2-69:2012) Kommentarfrist: 18.03.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 5359 Low-pressure hose assemblies for use with medical gases [(Revision of first edition (ISO 5359:1989)] Kommentarfrist: 25.03.2013 ISO/DIS 5359 Anaesthetic and respiratory equipment - Low-pressure hose assemblies for use with medical gases Kommentarfrist: 24.03.2013 ISO/DIS 5841-3 Implants for surgery - Cardiac pacemakers - Part 3: Low-profile connectors (IS-1) for implantable pacemakers [Revision of first edition (ISO 5841-3:1992)] Kommentarfrist: 08.01.2013 ISO/DIS 7176-1 Wheelchairs -- Part 1: Determination of static stability Kommentarfrist: 07.03.2013 ISO/DIS 7176-1 Wheelchairs - Part 1: Determination of static stability (Revision of first edition (ISO 7176-1:1986)) Kommentarfrist: 08.01.2013 Listenummer: 12/2012 Side: 16 av 119
11 Helsevesen, Teknikk ISO/DIS 11135.2 Sterilization of health-care products -- Ethylene oxide - Requirements for the development, validation and routine control of a sterilization process for medical devices Kommentarfrist: 10.02.2013 ISO/DIS 11140-1 Sterilization of health care products -- Chemical indicators -- Part 1: General requirements Kommentarfrist: 13.01.2013 ISO/DIS 11140-1 Sterilization of health care products - Chemical indicators - Part 1: General requirements Kommentarfrist: 16.01.2013 ISO/DIS 18082 Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases Kommentarfrist: 25.03.2013 ISO/DIS 80601-2-69 Medical Electrical Equipment -- Part 2-69: Particular requirements for basic safety and essential performance of oxygen concentrator equipment Kommentarfrist: 18.03.2013 ISO-standarder ISO 25539-2:2012 Cardiovascular implants -- Endovascular devices -- Part 2: Vascular stents Erstatter A00008:20:035887 CEN Workshop Agreements CWA 16520:2012 Guide dog mobility instructor - Competences Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) Fastsatte norske standarder NS-EN ISO 11979-1:2012 Oftalmiske implantater - Intraokulære linser - Del 1: Terminologi (ISO 11979-1:2012) Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2012) Listenummer: 12/2012 Side: 17 av 119
11 Helsevesen, Teknikk NS-EN ISO 12836:2012 Tannteknikk - Digitaliseringsutstyr for CAD/CAM-systemer for indirekte tannrestaureringer - Prøvingsmetoder for vurdering av nøyaktighet (ISO 12836:2012) Dentistry - Digitizing devices for CAD/CAM systems for indirect dental restorations - Test methods for assessing accuracy (ISO 12836:2012) NS-EN ISO 13485:2012/AC:2012 Rettelsesblad AC - Medisinsk utstyr - Systemer for kvalitetsstyring - Krav for å oppfylle regelverk (ISO 13485:2003+Cor 1:2009) Corrigendum AC - Medical devices - Quality management systems - Requirements for regulatory purposes (ISO 13485:2003+Cor 1:2009) NS-EN ISO 14457:2012 Tannpleie - Håndstykker og motorer (ISO 14457:2012) Dentistry - Handpieces and motors (ISO 14457:2012) NS-EN ISO 21672-2:2012 Tannpleie - Periodontale prober - Del 2: Betegnelse (ISO 21672-2:2012) Dentistry - Periodontal probes - Part 2: Designation (ISO 21672-2:2012) NS-EN ISO 23907:2012 Stikkskadebeskyttelse - Krav og prøvingsmetoder - Beholdere for skarpe og spisse gjenstander (ISO 23907:2012) Sharps injury protection - Requirements and test methods - Sharps containers (ISO 23907:2012) Tilbaketrukne norske standarder NS-EN ISO 7785-1:1999 Tannpleie - Håndstykker for tannpleie - Del 1: Luft-turbindrevne håndstykker med høy hastighet (ISO 7785-1:1997) Dental handpieces - Part 1: High-speed air turbine handpieces (ISO 7785-1:1997) NS-EN ISO 7785-2:1997 Tannpleie - Håndstykker for tannpleie - Del 2: Rette håndstykker og vinkelstykker (ISO 7785-2:1995) Dental handpieces - Part 2: Straight and geared angle handpieces (ISO 7785-2:1995) NS-EN ISO 11498:1999 Tannpleie - Håndstykker - Dentale lavspennings-elektromotorer (ISO 11498:1997) Dental handpieces - Dental low-voltage electrical motors (ISO 11498:1997) NS-EN ISO 11979-1:2006 Oftalmiske implantater - Intraokulære linser - Del 1: Terminologi (ISO 11979-1:2006) Ophthalmic implants - Intraocular lenses - Part 1: Vocabulary (ISO 11979-1:2006) NS-EN ISO 13294:1997 Håndstykker for tannpleie - Luftdrevne motorer for tannpleie (ISO 13294:1997) Dental handpieces - Dental air-motors (ISO 13294:1997) Listenummer: 12/2012 Side: 18 av 119
11 Helsevesen, Teknikk 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren 353-1 rev Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line Kommentarfrist: 15.04.2013 pren 694 Brannslanger - Formstabile slanger for faste systemer Fire-fighting hoses - Semi-rigid hoses for fixed systems Kommentarfrist: 25.02.2013 pren 943-2 Vernetøy mot kjemikalier i fast-, væske- eller gassform, inklusiv aerosoler i fast eller væskeform - Del 2: Funksjonskrav for gasstett (type 1) vernetøy for redningsstyrker Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 2: Performance requirements for gas-tight (Type 1) chemical protective suits for emergency teams (ET) Kommentarfrist: 06.02.2013 pren 1021-1 rev Møbler - Vurdering av antennelighet for stoppede møbler - Del 1: Antenning fra ulmende sigarett Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette Kommentarfrist: 29.04.2013 pren 1021-2 rev Møbler - Vurdering av antennelighet for stoppede møbler - Del 2: Antenning fra fyrstikkflamme eller tilsvarende Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent Kommentarfrist: 29.04.2013 pren 1127-2 rev Eksplosjonsfarlige omgivelser - Eksplosjonsforebyggelse og -vern - Del 2: Grunnleggende begreper og metodikk i gruvedrift Explosive atmospheres - Explosion prevention and protection - Part 2: Basic concepts and methodology for mining Kommentarfrist: 01.04.2013 pren 1263-1 Sikkerhetsnett - Del 1: Sikkerhetskrav, prøvingsmetoder Safety nets - Part 1: Safety requirements, test methods Kommentarfrist: 29.04.2013 pren 1263-2 Sikkerhetsnett - Del 2: Sikkerhetskrav ved plassering Safety nets - Part 2: Safety requirements for the positioning limits Kommentarfrist: 29.04.2013 Listenummer: 12/2012 Side: 19 av 119
13 Miljøvern. Helsevern. Sikkerhet pren 1365-2 Prøving av brannmotstanden til bærende bygningsdeler - Del 2: Gulv og tak Fire resistance tests for loadbearing elements - Part 2: Floors and roofs Kommentarfrist: 22.04.2013 pren 1866-2 Mobile fire extinguishers - Part 2: Requirements for the construction, pressure resistance and mechanical tests for extinguishers, with a maximum allowable pressure equal to or lower than 30 bar, which comply with the requirements of EN 1866-1 Kommentarfrist: 16.01.2013 pren 1947 Brannslanger - Formstabile slanger og slangetilbehør for pumper og kjøretøyer Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles Kommentarfrist: 25.02.2013 pren 13205-1 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 1: General requirements Kommentarfrist: 25.02.2013 pren 13205-2 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 2: Laboratory performance test based on determination of sampling efficiency Kommentarfrist: 25.02.2013 pren 13205-4 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 4: Laboratory performance test based on comparison of concentrations Kommentarfrist: 25.02.2013 pren 13205-5 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 5: Aerosol sampler performance test and sampler comparison carried out at workplaces Kommentarfrist: 25.02.2013 pren 13205-6 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 6: Transport and handling tests Kommentarfrist: 25.02.2013 pren 14181 Luftundersøkelse - Utslipp fra stasjonære kilder - Kvalitetskontroll av automatiske målesystemer Stationary source emissions - Quality assurance of automated measuring systems Kommentarfrist: 11.03.2013 pren 14540 Brannslanger - Ikke-svettende flatslanger for faste systemer Fire-fighting hoses - Non-percolating layflat hoses for fixed systems Kommentarfrist: 25.02.2013 Listenummer: 12/2012 Side: 20 av 119
13 Miljøvern. Helsevern. Sikkerhet pren 16447 Explosion isolation flap valves Kommentarfrist: 23.01.2013 pren 16471 Hjelmer for brannmannskap - Hjelmer for brannslukking i åpent landskap Firefighters helmets - Helmets for wildland fire fighting Kommentarfrist: 09.01.2013 pren 16473 Hjelmer for brannmannskap - Hjelmer for tekniske redningsoperasjoner Firefighters helmets - Helmets for technical rescue Kommentarfrist: 09.01.2013 pren 16479-1 Water quality - Performance requirements and conformity test procedures for water monitoring equipment - Part 1: Automated sampling devices (samplers) for water and waste water Kommentarfrist: 16.01.2013 pren 16493 Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys Kommentarfrist: 15.04.2013 pren 16500 Machines for compacting waste materials or recyclable fractions - Vertical baling presses - Safety requirements Kommentarfrist: 04.03.2013 pren 16502 Test method for the determination of the degree of soil acidity according to Baumann-Gully Kommentarfrist: 15.04.2013 pren 16503 Water quality - Guidance standard on assessing the hydromorphological features of transitional and coastal waters Kommentarfrist: 15.04.2013 pren ISO 9241-391 Ergonomics of Human System Interaction - Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures (ISO/DIS 9241-391:2012) Kommentarfrist: 29.04.2013 pren ISO 11267 Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants (ISO/DIS 11267:2012) Kommentarfrist: 30.01.2013 Listenummer: 12/2012 Side: 21 av 119
13 Miljøvern. Helsevern. Sikkerhet pren ISO 13137 Arbeidsplassluft - Pumper for prøvetaking av kjemiske og biologiske agens - Krav og prøvingsmetoder (ISO/DIS 13137:2012) Workplace atmospheres - Pumps for personal sampling of chemical and biological agents - Requirements and test methods (ISO/DIS 13137:2012) Kommentarfrist: 26.12.2012 pren ISO 16000-32 Indoor air - Part 32: Investigation of buildings for pollutants and other injurious factors - Inspections (ISO/DIS 16000-32:2012) Kommentarfrist: 26.12.2012 pren ISO 17994 Vannundersøkelse - Krav til sammenligning av relativ gjenvinning av mikroorganismer ved to kvantitative metoder Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO/DIS 17994:2012) Kommentarfrist: 25.02.2013 pren ISO 20346 rev Personlig verneutstyr - Beskyttende fottøy Personal protective equipment - Protective footwear (ISO/DIS 20346:2012) Kommentarfrist: 26.12.2012 pren ISO 25980 Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes (ISO/DIS 25980:2012) Kommentarfrist: 01.04.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 3008-2 Fire-resistance tests -- Part 2: Lift landing door assemblies Kommentarfrist: 22.01.2013 ISO/DIS 9241-391 Ergonomics of Human System Interaction -- Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures Kommentarfrist: 29.04.2013 ISO/DIS 11267 Soil quality - Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants Kommentarfrist: 30.01.2013 ISO/DIS 11267 Soil quality -- Inhibition of reproduction of Collembola (Folsomia candida) by soil pollutants Kommentarfrist: 27.01.2013 ISO/DIS 14067.2 Carbon footprint of products -- Requirements and guidelines for quantification and communication Kommentarfrist: 28.12.2012 Listenummer: 12/2012 Side: 22 av 119
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 16405 Measurement of toxic gas production using FTIR technique for room corner test and open calorimetry Kommentarfrist: 25.02.2013 ISO/DIS 17091 Workplace air -- Determination of lithium hydroxide, sodium hydroxide, potassium hydroxide and calcium dihydroxide -- Method by measurement of corresponding cations by suppressed ion chromatography Kommentarfrist: 19.01.2013 ISO/DIS 17734-1 Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry -- Part 1: Isocyanates using dibutylamine derivatives Kommentarfrist: 14.02.2013 ISO/DIS 17734-2 Determination of organonitrogen compounds in air using liquid chromatography and mass spectrometry -- Part 2: Amines and aminoisocyanates using dibutylamine and ethyl chloroformate derivatives Kommentarfrist: 14.02.2013 ISO/DIS 17994 Water quality -- Criteria for establishing the equivalency of two microbiological methods Kommentarfrist: 25.02.2013 ISO/DIS 17994 Water quality -- Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods Kommentarfrist: 24.02.2013 ISO/DIS 20346 Protective footwear for professional use - Specifications Kommentarfrist: 26.12.2012 ISO/DIS 25980 Health and safety in welding and allied processes -- Transparent welding curtains, strips and screens for arc welding processes Kommentarfrist: 01.04.2013 ISO-standarder ISO 5659-2:2012 Plastics -- Smoke generation -- Part 2: Determination of optical density by a single-chamber test Erstatter A00008:20:020407,A00008:20:031270 ISO 6182-2:2012 Fire protection -- Automatic sprinkler systems -- Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms Erstatter A00008:20:039620 Listenummer: 12/2012 Side: 23 av 119
13 Miljøvern. Helsevern. Sikkerhet ISO 6182-3:2012 Fire protection -- Automatic sprinkler systems -- Part 3: Requirements and test methods for dry pipe valves Erstatter A00008:20:039629 ISO 6182-5:2012 Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves Erstatter A00008:20:039630 ISO 16737:2012 Fire safety engineering -- Requirements governing algebraic equations -- Vent flows Erstatter A00008:20:037659 ISO 16900-3:2012 Respiratory protective devices -- Methods of test and test equipment -- Part 3: Determination of particle filter penetration ISO 17420-3:2012 Respiratory protective devices -- Performance requirements -- Part 3: Thread connection ISO/TS 5660-3:2012 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 3: Guidance on measurement Erstatter A00008:20:038322 ISO/TS 12901-1:2012 Nanotechnologies -- Occupational risk management applied to engineered nanomaterials -- Part 1: Principles and approaches ISO/TS 14198:2012 Road vehicles -- Ergonomic aspects of transport information and control systems -- Calibration tasks for methods which assess driver demand due to the use of in-vehicle systems ISO/TS 15029-2:2012 Petroleum and related products -- Determination of spray ignition characteristics of fire-resistant fluids -- Part 2: Spray test -- Stabilized flame heat release method Rapporter fra CEN (CR) CEN ISO/TS 15011-6:2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) CEN ISO/TR 7250-2:2011 Basale kroppsmål for teknologisk design Del 2: Statistisk oppsummering av kroppsmål for individuelle ISO populasjoner (ISO/TR 7250-2:2010) Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010) Listenummer: 12/2012 Side: 24 av 119
13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TR 9241-100:2011 Ergonomi for samhandling mellom menneske og system Del 100: Innføring i standarder relatert til software-ergonomi (ISO/TR 9241-100:2010) Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) CEN ISO/TS 15011-6:2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS 15011-6:2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) CEN/TR 614-3:2010 Maskinsikkerhet - Del 3: Ergonomiske prinsipper for konstruksjon av mobilt maskineri Safety of machinery - Part 3: Ergonomic principles for the design of mobile machinery CEN/TR 1317-6:2012 Skadereduserende vegtiltak - Del 6: Fotgjengerrekkverk / Road restraint systems - Part 6: Pedestrian restraint system, Pedestrian Parapet Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets CEN/TR 15642:2011 Ensartede prøvingsprosedyrer for prøvinger etter EN 3-7:2004+A1:2007 Unified tests procedures for the tests of EN 3-7:2004+A1:2007 CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16110:2010 Karakterisering av avfall Veiledning i bruk av økotoksikologiske analyser på avfall Characterization of waste - Guidance on the use of ecotoxicity tests applied to waste CEN/TR 16130:2011 Karakterisering av avfall - På stedet verifikasjon Characterization of waste - On-site verification CEN/TR 16148:2011 Vurdering av hode- og nakkeskader, forbrenningsskader og hørselsskader - Veiledning for komiteer som utarbeider hjelmstandarder Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees CEN/TR 16149:2011 Veiledning om utarbeidelse av standarder i CEN/TC 158 Guidance Document for drafting CEN/TC 158 Standards CEN/TR 16151:2011 Vannundersøkelse - Veiledning i utforming av multimetriske indekser Water quality - Guidance on the design of Multimetric Indices Listenummer: 12/2012 Side: 25 av 119
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16176:2011 Karakterisering av avfall Screeningsmetode for grunnstoffsammensetning ved bruk av røntgenfluorescensspektrometri for verifisering på stedet Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates CEN/TR 16208:2011 Biobaserte produkter - Oversikt over standarder Biobased products - Overview of standards CEN/TR 16220:2011 Byggevarer - Vurdering av frigjøring av farlige stoffer - Komplement til prøvetaking Construction products - Assessment of release of dangerous substances - Complement to sampling CEN/TR 16243:2011 Omgivelsesluft Veiledning for måling av elementært karbon (EC) og organisk karbon (OC) avsatt på filtre Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5 CEN/TR 16303-1:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 1: Felles referanse informasjon og rapportering Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 1: Common reference information and reporting CEN/TR 16303-2:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 2: Kjøretøymodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification CEN/TR 16303-3:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 3: Prøvingsmodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification CEN/TR 16303-4:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 4: Valideringsprosedyre Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures Listenummer: 12/2012 Side: 26 av 119