Different handle designs available Optionally with Pushbuttons and Deadman Industrial-suited robust design IP classes up to 68 (on request) Several Output Options (analog, CAN J1939, CANopen, USB) The TRY80 series provides very robust joysticks for usage in tough environments. With optionally available safety features it is also suited for critical applications. Besides standard analog signal output, bus interfaces like USB and CAN J1939 / CANopen are available. Electrical Data Joystick Sensor Supply Voltage Current Consumption Max Reverse Polarity Max Overvoltage Max Output Impedance Resolution Return to Center Voltage (no Load) Output Voltages Hall Effect 5 VDC ±0,5 VDC transient free 10 ma per axis -10 VDC 16 VDC 6 Ohm Infinite ±00 mv initially 0..5 V / 0,5..4,5 V / 0,5..4,75 V / redundant signals available Mechanical Data Joystick Expected Life 5 million cycles Mechanical Angle of Movement 38 (±19 from center) Break Out Force 7,7 N Operating force 14,0 N Maximum Applied Force 900 N, 0 cm above panel Sealing up to IP67 (depending on handle configuration) Operating Temperature -40 C..+85 C Storage Temperature -40 C..+85 C EMV Immunity Level /V/M) IEC 61000-4-8:009 EMC Emissions Level IEC 61000-4-3:006 ESD IEC 61000-4-:008 Note: 1. All values are nominal.. Exact specifications may be subject to configuration. Page: 1 of 6
Configurations of Handles Pushbuttons on top and side Deadman Proximity Sensor inside handle Short stock grip Side View Users View Users View Side View Technical Data Switches Electrical Load DWV Low Level Electrical Life Mechanical Life Sealing Action Operating Force Total Travel Available Button Colors 5 A resistive, 3 A inductive 1050 Vrms 10 ma at 30 mv 5000 cycles 5 A @ 8 VDC resistive snap-action 1 million cycles IP67 Momentary, snap-action 7,5 N ± N mm + 0,5 mm White, grey, black, red, orange, yellow, green, blue, purple Notes: 1. Maximum possible configuration for the Stock Grip is up to Top Buttons and Side Buttons. A handle with Deadman or Proximity Sensor can have Top Buttons, but no Side Buttons.. Maximum possible configuration for the Short Stock Grip is up to Top Buttons. It is not available with Deadman, Index trigger, Proximity Switch, or Side Buttons. 3. If unspecified, the pushbuttons will have snap action momentary switches ( normally open ) and red button caps. Page: of 6
Order Description Series TRY80 Axis Axes, 1 Top Pushbutton Axes, Top Pushbuttons Axes, Top Pushbuttons, Deadman Axes, 1 Top Pushbtn., Side Pushbuttons 3 4 5 6 Rubber Boot 5 Spring return Spring Return Standard 1 Limiter Square Round Plus Single Axis X Single Axis Y Handle / Switches Stock Grip long, no Pushbuttons Ball Tip Stock Grip long, 1 Top Pushbutton Stock Grip long, Top Pushbuttons Stock Grip long, Top Pushbuttons, Deadman Stock Grip long, 1 Top Pushb., Side Pushb. Stock Grip short, no Pushbutton Stock Grip short, 1 Top Pushbutton Stock Grip short, Top Pushbuttons Output Options 0..5 V (rail to rail) 0,5..4,5 V 0,5..4,75 V USB Joystick USB Mouse Emulation CAN-bus J1939 CANopen Voltage Regulator Supply 6..35 VDC, Output 0..5 VDC Supply 11..35 VDC, Output ±10 VDC Additional Options Dual Decode max. IP grade (above panel) Dual Sensor Q R P X Y 1 3 4 5 6 7 8 9 1 3 5 6 CAN COP V105 V110B D IP DS For higher quantities or on-going demand, additional options are available For example: Stock Grip with further Pushbutton configurations Customer-specific wiring Redundant Output Signal (inverted and parallel), Discrete Output Page: 3 of 6
Technical Drawing Ball Tip Long Stock Grip Short Stock Grip All dimensions in mm Page: 4 of 6
Mounting Cutout Dimensions Drop-in mounting only Cable Outlet Y All dimensions in mm X Wiring Color Function Color Function Color Function BLACK Ground WHITE Switch Common PURPLE/WHITE Deadman RED Vcc ORANGE Switch 1 YELLOW/WHITE Proximity Sensor BLUE X Axis PURPLE Switch RED/WHITE Index Trigger YELLOW Y Axis GREY Switch 3 LIGHT GREEN LED 1 GREEN Z Axis BROWN Switch 4 LIGHT ORANGE LED 13 PINK Switch 5 GREY/WHITE LED 14 BLUE/WHITE Switch 6 BLACK/WHITE LED 15 YELLOW/BLACK Switch 7 GREEN/BLACK Switch 8 Note: 1. Standard cable length ca. 400 mm; wires AWG for Joystick, switches, LEDs, etc.. For Joysticks with USB interface or mouse emulation a cable is included (USB male type A connector). 3. Wiring can deviate with special output options (CAN-bus, Center Detect, etc.), detailed information will be provided with your product. Page: 5 of 6
Technical Data CAN J1939 Supply Voltage Current Consumption CAN Operating / Storage Temperature 6V to 35V Typical: 15mA min, +5mA per LED, +10mA per Axis SAE J1939 serial bus specification - 5 C..+70 C / -40 C..+70 C Wiring CAN J1939 Colour Function Colour Function Colour Function Red Supply Power Green CAN High data Blue Identifier Select LSB Black Ground GND White CAN Low data Orange Identifier Select MSB Please contact us for further details on the CANbus interfaces and project-specific solutions. Page: 6 of 6