Annonseringsdato: 2013-08-22 Listenummer: 10/2013 Standardiseringsprosjekter og nye standarder Listenummer: 10/2013 Side: 1 av 131
00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - internasjonale (ISO) ISO/DIS 1434 Natural rubber in bales - Amount of bale coating - Determination Kommentarfrist: 24.10.2013 ISO/DIS 4999 Continuous hot-dip terne (lead alloy) coated cold-reduced carbon steel sheet of commercial drawing and structural qualities [Revision of second edition (ISO 4999:1991)] Kommentarfrist: 29.10.2013 ISO/DIS 5954 Cold-reduced carbon steel sheet according to hardness requirements Kommentarfrist: 29.10.2013 ISO/DIS 6141 Gas analysis - Requirements on certificates for gases and gas mixtures [Revision of second edition (ISO 6141:1984)] Kommentarfrist: 18.10.2013 ISO/DIS 7322 Composition cork - Test methods [Revision of first edition (ISO 7322:1986)] Kommentarfrist: 08.10.2013 ISO/DIS 10239 Kommentarfrist: 27.09.2013 ISO/DIS 10545-1 Ceramic tiles - Part 1: Sampling and basis for acceptance Kommentarfrist: 11.10.2013 ISO/DIS 11070 Sterile single-use intravascular catheter introducers Kommentarfrist: 04.10.2013 ISO/DIS 11210 Determination of platinum in platinum jewellery alloys - Gravimetric method after precipitation of diammonium hexachloroplatinate Kommentarfrist: 08.11.2013 ISO/DIS 11426 Determination of gold in gold jewellery alloys - Cupellation method (fire assay) Kommentarfrist: 08.11.2013 ISO/DIS 11489 Determination of platinum in platinum jewellery alloys - Gravimetric method after reduction with mercury(i) chloride Kommentarfrist: 08.10.2013 Listenummer: 10/2013 Side: 2 av 131
00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS 11490 Determination of palladium in palladium jewellery alloys - Gravimetric method with dimethyl glyoxime Kommentarfrist: 08.10.2013 ISO/DIS 13756 Determination of silver in silver jewellery alloys - Volumetric (potentiometric) method using sodium chloride or potassium chloride Kommentarfrist: 08.10.2013 ISO/DIS 13860 Machinery for forestry - Forwarders - Terminology and specifications Kommentarfrist: 24.10.2013 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 4287:1998/prA2 Geometriske produktspesifikasjoner (GPS) - Overflatebeskaffenhet: Profilmetode - Termer, definisjoner og overflatestruktur parametere - Endringsblad 2 (ISO 4287:1997/DAM 2:2013) Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 2 (ISO 4287:1997/DAM 2:2013) Kommentarfrist: 04.09.2013 pren 764-1 rev Pressure equipment - Part 1: Vocabulary Kommentarfrist: 01.01.2014 pren 15429-4 Sweepers - Part 4: Symbols for operator controls and other displays Kommentarfrist: 01.01.2014 pren 15987 Lær - Terminologi - Sentrale definisjoner i lærbransjen Leather - Terminology - Key definitions for the leather trade Kommentarfrist: 11.12.2013 pren 16572 Bevaring av kulturminner Ordliste over tekniske termer som omhandler mørtel til murverk, fuger og puss brukt i kulturminner Conservation of Cultural Heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage Kommentarfrist: 28.08.2013 pren ISO 9687 rev Dentistry - Graphical symbols for dental equipment (ISO/DIS 9687:2013) Kommentarfrist: 27.09.2013 Listenummer: 10/2013 Side: 3 av 131
01 Generelt. Terminologi. Standardisering. Dokumentasjon pren ISO 10286 rev Gassflasker - Terminologi (ISO/DIS 10286:2013) Gas cylinders - Terminology (ISO/DIS 10286:2013) Kommentarfrist: 04.09.2013 pren ISO 10318-1 Geosynthetics - Part 1: Terms and definitions (ISO/DIS 10318-1:2013) Kommentarfrist: 13.11.2013 pren ISO 10318-2 Geosynthetics - Part 2: Symbols and Pictograms (ISO/DIS 10318-2:2013) Kommentarfrist: 13.11.2013 pren ISO 16443 Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: 30.10.2013 pren ISO 17100 Translation Services - Requirements for translation services (ISO/DIS 17100:2013) Kommentarfrist: 13.11.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 129-2 Technical product documentation -- Indication of dimensions and tolerances -- Part 2: Dimensioning of mechanical engineering drawings Kommentarfrist: 22.10.2013 ISO/DIS 9687 Dentistry -- Graphical symbols for dental equipment Kommentarfrist: 27.09.2013 ISO/DIS 10286 Gas cylinders -- Terminology Kommentarfrist: 18.09.2013 ISO/DIS 10286 Gas cylinders -- Terminology Kommentarfrist: 15.09.2013 ISO/DIS 10318-1 Geosynthetics -- Part 1: Terms and definitions Kommentarfrist: 13.11.2013 ISO/DIS 10318-2 Geosynthetics -- Part 2: Symbols and Pictograms Kommentarfrist: 13.11.2013 Listenummer: 10/2013 Side: 4 av 131
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 11620 Information and documentation -- Library performance indicators Kommentarfrist: 26.09.2013 ISO/DIS 16443 Dentistry -- Vocabulary of oral implantology Kommentarfrist: 18.09.2013 ISO/DIS 17100 Translation Services -- Requirements for translation services Kommentarfrist: 13.11.2013 ISO/DIS 20712-3 Water safety signs and beach safety flags -- Part 3: Guidance for the use of water safety signs and beach safety flags Kommentarfrist: 17.09.2013 ISO/DIS 20712-3 Water safety signs and beach safety flags -- Part 3: Guidance for use Kommentarfrist: 14.11.2013 ISO/DIS 22324 Societal security - Emergency managament - Colour-coded alert Kommentarfrist: 21.09.2013 ISO/DIS 24617-4 Language resource management -- Semantic annotation framework (SemAF) -- Part 4: Semantic roles (SemAF-SR) Kommentarfrist: 31.08.2013 ISO-standarder ISO 1629:2013 Rubber and latices -- Nomenclature Erstatter A00008:20:021814,A00008:20:043915 Rapporter fra CEN (CR) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Listenummer: 10/2013 Side: 5 av 131
01 Generelt. Terminologi. Standardisering. Dokumentasjon Fastsatte norske standarder NS-EN 1304:2013 Takstein og tilbehørstein av tegl - Produktkrav og definisjoner Clay roofing tiles and fittings - Product definitions and specifications NS-EN 14227-2:2013 Hydraulisk stabiliserte masser - Spesifikasjoner - Del 2: Slaggstabiliserte masser Hydraulically bound mixtures - Specifications - Part 2: Slag bound granular mixtures NS-EN ISO 14451-1:2013 Pyrotekniske artikler - Pyrotekniske artikler for kjøretøy - Del 1: Terminologi (ISO 14451-1:2013) Pyrotechnic articles - Pyrotechnic articles for vehicles - Part 1: Terminology (ISO 14451-1:2013) NS-EN ISO 80000-1:2013 Størrelser og enheter - Del 1: Generelt (ISO 80000-1:2009+Cor 1:2011) Quantities and units - Part 1: General (ISO 80000-1:2009+Cor 1:2011) NS-EN ISO 80000-2:2013 Størrelser og enheter - Del 2: Matematiske tegn og symboler som skal brukes i naturvitenskap og teknologi (ISO 80000-2:2009) Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology (ISO 80000-2:2009) NS-EN ISO 80000-3:2013 Størrelser og enheter - Del 3: Rom og tid (ISO 80000-3:2006) Quantities and units - Part 3: Space and time (ISO 80000-3:2006) NS-EN ISO 80000-4:2013 Størrelser og enheter - Del 4: Mekanikk (ISO 80000-4:2006) Quantities and units - Part 4: Mechanics (ISO 80000-4:2006) NS-EN ISO 80000-5:2013 Størrelser og enheter - Del 5: Termodynamikk (ISO 80000-5:2007) Quantities and units - Part 5: Thermodynamics (ISO 80000-5:2007) NS-EN ISO 80000-9:2013 Størrelser og enheter - Del 9: Fysikalsk kjemi og molekylfysikk (ISO 80000-9:2009+Amd 1:2011) Quantities and units - Part 9: Physical chemistry and molecular physics (ISO 80000-9:2009+Amd 1:2011) NS-EN ISO 80000-10:2013 Størrelser og enheter - Del 10: Atom- og kjernefysikk (ISO 80000-10:2009) Quantities and units - Part 10: Atomic and nuclear physics (ISO 80000-10:2009) NS-EN ISO 80000-11:2013 Størrelser og enheter - Del 11: Karakteristiske tall (ISO 80000-11:2008) Quantities and units - Part 11: Characteristic numbers (ISO 80000-11:2008) Listenummer: 10/2013 Side: 6 av 131
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN ISO 80000-12:2013 Størrelser og enheter - Del 12: Faststoff-fysikk (ISO 80000-12:2009) Quantities and units - Part 12: Solid state physics (ISO 80000-12:2009) Tilbaketrukne norske standarder NS-EN 1304:2005 Takstein og tilbehørstein av tegl - Produktkrav og definisjoner Clay roofing tiles and fittings - Product definitions and specifications NS-EN 14227-2:2004 Hydraulisk stabiliserte masser - Spesifikasjoner - Del 2: Slaggstabiliserte masser Hydraulically bound mixtures - Specifications - Part 2: Slag bound mixtures NS-ISO 80000-1:2009 Størrelser og enheter - Del 1: Generelt Quantities and units - Part 1: General NS-ISO 80000-1:2009/AC:2011 Rettelsesblad AC - Størrelser og enheter - Del 1: Generelt Corrigendum AC - Quantities and units - Part 1: General NS-ISO 80000-2:2009 Størrelser og enheter - Del 2: Matematiske tegn og symboler for bruk i naturvitenskap og teknologi Quantities and units - Part 2: Mathematical signs and symbols to be used in the natural sciences and technology NS-ISO 80000-3:2006 Størrelser og enheter - Del 3: Rom og tid Quantities and units - Part 3: Space and time NS-ISO 80000-4:2006 Størrelser og enheter - Del 4: Mekanikk Quantities and units - Part 4: Mechanics NS-ISO 80000-5:2007 Størrelser og enheter - Del 5: Termodynamikk Quantities and units - Part 5: Thermodynamics Listenummer: 10/2013 Side: 7 av 131
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-ISO 80000-9:2009 Størrelser og enheter - Del 9: Fysikalsk kjemi og molekylfysikk Quantities and units - Part 9: Physical chemistry and molecular physics NS-ISO 80000-9:2009/A1:2011 Endringsblad A1 - Størrelser og enheter - Del 9: Fysikalsk kjemi og molekylfysikk Amendment A1 - Quantities and units - Part 9: Physical chemistry and molecular physics NS-ISO 80000-10:2009 Størrelser og enheter - Del 10: Atom- og kjernefysikk Quantities and units - Part 10: Atomic and nuclear physics NS-ISO 80000-11:2008 Størrelser og enheter - Del 11: Karakteriske tall Quantities and units - Part 11: Characteristic numbers NS-ISO 80000-12:2009 Størrelser og enheter - Del 12: Faststoff-fysikk Quantities and units - Part 12: Solid state physics 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 16489-2 Professional indoor UV exposure services - Part 2: Required qualification and competence of the indoor UV exposure consultant Kommentarfrist: 11.09.2013 pren 16489-3 Professional indoor UV exposure services - Part 3: Requirements for the provision of services Kommentarfrist: 11.09.2013 pren 16636 Pest management services - Requirements and competences Kommentarfrist: 27.11.2013 pren 16646 Maintenance - Maintenance within physical asset management Kommentarfrist: 01.01.2014 Listenummer: 10/2013 Side: 8 av 131
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren ISO 18490 Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: 30.10.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 9362 Banking -- Banking telecommunication messages -- Business identifier code (BIC) Kommentarfrist: 13.10.2013 ISO/DIS 15638-6 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight Vehicles (TARV) -- Part 6: Regulated applications Kommentarfrist: 26.09.2013 ISO/DIS 15638-8 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 8: Vehicle access management Kommentarfrist: 26.09.2013 ISO/DIS 15638-11 Intelligent transport systems -- Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) -- Part 11: Driver work records Kommentarfrist: 26.09.2013 ISO/DIS 15638-12 Intelligent transport systems -- Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) -- Part 12: Vehicle mass monitoring Kommentarfrist: 26.09.2013 ISO/DIS 15638-14 Intelligent transport systems -- Framework for cooperative telematics applications for Regulated commercial freight vehicles (TARV) -- Part 14: Vehicle access control Kommentarfrist: 26.09.2013 ISO/DIS 15638-15 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 15: Vehicle location monitoring Kommentarfrist: 26.09.2013 ISO/DIS 15638-16 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 16: Vehicle speed monitoring Kommentarfrist: 26.09.2013 ISO/DIS 15638-17 Intelligent transport systems -- Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV) -- Part 17: Consignment and location monitoring Kommentarfrist: 26.09.2013 Listenummer: 10/2013 Side: 9 av 131
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 17185-1 Intelligent transport systems - Public transport user information -- Part 1: Standards framework for public information systems Kommentarfrist: 22.10.2013 ISO/DIS 18490 Non-destructive testing -- Evaluation of vision acuity of NDT personnel Kommentarfrist: 30.10.2013 ISO/DIS 21217 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Architecture Kommentarfrist: 06.09.2013 ISO/DIS 22324 Societal security - Emergency managament - Colour-coded alert Kommentarfrist: 21.09.2013 ISO/DIS 24534-3 Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 3: Vehicle data Kommentarfrist: 25.09.2013 ISO/DIS 24534-3 Intelligent transport systems -- Automatic vehicle and equipment identification -- Electronic registration identification (ERI) for vehicles -- Part 3: Vehicle data Kommentarfrist: 22.09.2013 ISO-standarder ISO/TR 14806:2013 Intelligent transport systems -- Public transport requirements for the use of payment applications for fare media ISO/TS 17931:2013 Intelligent transport systems -- Extension of map database specifications for Local Dynamic Map for applications of Cooperative ITS CEN Workshop Agreements CWA 16649:2013 Managing emerging technology-related risks Rapporter fra CEN (CR) CEN ISO/TS 25110:2013 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013) Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013) Listenummer: 10/2013 Side: 10 av 131
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TR ISO 24014-3:2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013) CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) CEN ISO/TS 13141:2010/AC:2013 Electronic fee collection - Localisation augmentation communication for autonomous systems - Technical Corrigendum 1 (ISO/TS 13141:2010/Cor 1:2013) CEN ISO/TS 16401-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) CEN ISO/TS 16401-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) CEN ISO/TS 16403-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) CEN ISO/TS 16403-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO/TS 16403-2:2012) CEN ISO/TS 16407-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TDS 16407-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) CEN ISO/TS 16407-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) CEN ISO/TS 16410-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TDS 16410-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) CEN ISO/TS 16410-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) Listenummer: 10/2013 Side: 11 av 131
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17444-1:2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS 17444-1:2012) CEN ISO/TS 17575-1:2010/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS 17575-1:2010/Cor 1:2013) CEN ISO/TS 17575-3:2011/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS 17575-3:2011/Cor 1:2013) CEN ISO/TS 18234-3:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS 18234-3:2013) CEN ISO/TS 18234-11:2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS 18234-11:2013) CEN/TR 14142-2:2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC 17024 for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission Listenummer: 10/2013 Side: 12 av 131
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing CEN/TS 16555-1:2013 Innovation Management - Part 1: Innovation Management System Fastsatte norske standarder NS-EN 13724:2013 Åpninger på private postkasser og brevinnkast egnet for dører o.l. - Krav og prøvingsmetoder Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods NS-EN 16352:2013 Logistikk - Spesifikasjoner for rapportering av kriminelle hendelser Logistics - Specifications for reporting crime incidents Tilbaketrukne norske standarder NS-EN 13724:2002 Posttjenester - Åpninger på private postkasser og brevinnkast egnet for dører o.l. - Krav og prøvingsmetoder Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods Listenummer: 10/2013 Side: 13 av 131
07 Matematikk. Naturvitenskap 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 16649 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (ISO/DIS 16649 3:2013) Kommentarfrist: 11.09.2013 pren ISO 16649-3 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (ISO/DIS 16649-3:2013) Kommentarfrist: 11.09.2013 pren ISO 17516 Cosmetics - Microbiological limits Kommentarfrist: 18.10.2013 pren ISO 18743 Microbiology of food and animal feed - Detection of Trichinella Larvae in meat - Physical method by digestion (ISO/DIS 18743:2013) Kommentarfrist: 27.09.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 16649-3 Microbiology of food and animal feeding stuffs -- Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli -- Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide Kommentarfrist: 11.09.2013 ISO/DIS 18743 Microbiology of food and animal feed -- Detection of Trichinella Larvae in meat -- Physical method by digestion Kommentarfrist: 27.09.2013 Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS 6579-2:2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS 6579-2:2012) Listenummer: 10/2013 Side: 14 av 131
07 Matematikk. Naturvitenskap CEN ISO/TS 10272-3:2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS 15216-1:2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 1: Metode for kvantitative bestemmelse (ISO/DTS 15216-1:2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 1: Method for quantification (ISO/TS 15216-1:2013, Corrected Version 2013-05-01) CEN ISO/TS 15216-2:2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 2: Metode for kvalitativ bestemmelse (ISO/DTS 15216-2:2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 2: Method for qualitative detection (ISO/TS 15216-2:2013, Corrected Version 2013-05-01) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures CEN/TR 15449-1:2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR 15449-2:2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR 15449-3:2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment Listenummer: 10/2013 Side: 15 av 131
07 Matematikk. Naturvitenskap CEN/TS 15634-2:2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Fastsatte norske standarder NS-EN 1650:2008+A1:2013 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonsprøving for evaluering av fungicidaktivitet eller gjæringsaktivitet av kjemiske desinfeksjonsmidler og antiseptika brukt i mat, industri, husholdning og institusjoner - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) NS-EN ISO 19250:2013 Vannundersøkelse - Bestemmelse av Salmonella spp. (ISO 19250:2010) Water quality - Detection of Salmonella spp. (ISO 19250:2010) Tilbaketrukne norske standarder NS-EN 1650:2008 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonsprøving for evaluering av fungicidaktivitet eller gjæringsaktivitet av kjemiske desinfeksjonsmidler og antiseptika brukt i mat, industri, husholdning og institusjoner - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity of chemical disinfectants and antiseptics used in food, industrial, domestic and institutional areas - Test method and requirements (phase 2, step 1) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 11979-9:2006/prA1 Ophthalmic implants - Intraocular lenses - Part 9: Multifocal intraocular lenses (ISO 11979-9:2006/DAM 1:2013) Kommentarfrist: 02.10.2013 EN ISO 11979-10:2006/prA1 Ophthalmic implants - Intraocular lenses - Part 10: Phakic intraocular lenses (ISO 11979-10:2006/DAM 1:2013) Kommentarfrist: 02.10.2013 pren 285 Sterilisering - Vanndampsterilisatorer - Store sterilisatorer Sterilization - Steam sterilizers - Large sterilizers Kommentarfrist: 02.10.2013 Listenummer: 10/2013 Side: 16 av 131
11 Helsevesen, Teknikk pren 455-2 Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties Kommentarfrist: 16.10.2013 pren 455-3 Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation Kommentarfrist: 23.10.2013 pren 12791 Kjemiske desinfeksjonsmidler og antiseptika - Kirurgiske hånddesinfeksjonsmidler - Prøvingsmetode og krav (fase 2/trinn 2) Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: 04.12.2013 pren 16615 Chemical disinfectants and antiseptics - Quantitative test method for the evaluation of bactericidal and yeasticidal activity on nonporous surfaces with mechanical action employing wipes in the medical area (4- field test) - Test method and requirements (phase 2, step 2) Kommentarfrist: 23.10.2013 pren 16616 Chemical disinfectants and antiseptics - Chemical-thermal textile disinfection - Test method and requirements (phase 2, step 2) Kommentarfrist: 23.10.2013 pren ISO 7396-1 Medical gas pipeline systems - Part 1: Pipeline systems for compressed medical gases and vacuum (ISO/DIS 7396-1:2013) Kommentarfrist: 16.10.2013 pren ISO 7494-2 rev Dentistry - Dental units - Part 2: Media channels and connections (ISO/DIS 7494-2:2013) Kommentarfrist: 28.08.2013 pren ISO 9680 Tannpleie - Arbeidslamper for tannbehandling (ISO/DIS 9680:2013) Dentistry - Operating lights (ISO/DIS 9680:2013) Kommentarfrist: 09.10.2013 pren ISO 9687 rev Dentistry - Graphical symbols for dental equipment (ISO/DIS 9687:2013) Kommentarfrist: 27.09.2013 pren ISO 11070 rev Sterilt engangsutstyr til bruk ved innføring av kardiovaskulære katetre (ISO/DIS 11070:2013) Sterile, single-use intravascular catheter introducers (ISO/DIS 11070:2013) Kommentarfrist: 04.10.2013 Listenummer: 10/2013 Side: 17 av 131
11 Helsevesen, Teknikk pren ISO 11499 rev Dentistry - Single-use cartridges for local anaesthetics (ISO/DIS 11499:2013) Kommentarfrist: 11.09.2013 pren ISO 11978 rev Oftalmisk optikk - Kontaktlinser og kontaktlinsepleieprodukter - Merking (ISO/DIS 11978:2013) Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO/DIS 11978:2013) Kommentarfrist: 04.09.2013 pren ISO 11979-2 rev Oftalmiske implantater - Intraokulære linser - Del 2: Optiske egenskaper og prøvingsmetoder (ISO/DIS 11979-2:2012) Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO/DIS 11979-2:2012) Kommentarfrist: 28.08.2013 pren ISO 11979-2 Oftalmiske implantater - Intraokulære linser - Del 2: Optiske egenskaper og prøvingsmetoder (ISO/DIS 11979-2:2013) Ophthalmic implants - Intraocular lenses - Part 2: Optical properties and test methods (ISO/DIS 11979-2:2013) Kommentarfrist: 28.08.2013 pren ISO 11979-6 Oftalmiske implantater - Intraokulære linser - Del 6: Holdbarhet og stabilitet ved transport (ISO/DIS 11979-6:2013) Ophthalmic implants - Intraocular lenses - Part 6: Shelf-life and transport stability (ISO/DIS 11979-6:2013) Kommentarfrist: 18.09.2013 pren ISO 11979-7 Oftalmiske implantater - Intraokulære linser - Del 7: Kliniske undersøkelser (ISO /DIS 11979-7:2012) Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO/DIS 11979-7:2013) Kommentarfrist: 28.08.2013 pren ISO 11979-7 Oftalmiske implantater - Intraokulære linser - Del 7: Kliniske undersøkelser (ISO/DIS 11979-7:2013) Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO/DIS 11979-7:2013) Kommentarfrist: 28.08.2013 pren ISO 13116 Dentistry - Test Method for Determining Radio-Opacity of Materials (ISO/DIS 13116:2013) Kommentarfrist: 30.10.2013 pren ISO 13212 Oftalmisk optikk - Kontaktlinser og vedlikeholdsprodukter - Retningslinjer for bestemmelse av lagringstid (ISO/DIS 13212:2013) Ophthalmic optics - Contact lens care products - Guidelines for determination of shelf-life (ISO/DIS 13212:2013) Kommentarfrist: 18.09.2013 pren ISO 16443 Dentistry - Terminology of oral implantology (ISO/DIS 16443:2013) Kommentarfrist: 30.10.2013 Listenummer: 10/2013 Side: 18 av 131
11 Helsevesen, Teknikk pren ISO 18490 Non-destructive Testing - Evaluation of vision acuity of NDT personnel (ISO/DIS 18490:2013) Kommentarfrist: 30.10.2013 pren ISO/IEC 80369-7 Small bore connectors for liquids and gases in healthcare applications - Part 7: Connectors with 6% (Luer) taper for intravascular or hypodermic applications (ISO/IEC/DIS 80369-7) Kommentarfrist: 04.10.2013 pren ISO/IEC 80369-3 Small-bore connectors for liquids and gases in healthcare applications - Part 3: Connectors for enteral applications (ISO/IEC/DIS 80369-3:2013) Kommentarfrist: 01.01.2014 Standardforslag til høring - internasjonale (ISO) ISO 11979-9:2006/DAmd 1 Kommentarfrist: 02.10.2013 ISO 11979-10:2006/DAmd 1 Kommentarfrist: 02.10.2013 ISO/DIS 5841-2 Implants for surgery - Cardiac pacemakers - Part 2: Reporting of clinical performance of populations of pulse generators or leads [Revision of first edition (ISO 5841-2:1986)] Kommentarfrist: 22.10.2013 ISO/DIS 7396-1 Medical gas pipeline systems - Part 1: Pipelines for compressed medical gases and vacuum Kommentarfrist: 16.10.2013 ISO/DIS 9680 Tannpleie - arbeidslampe for tannbehandling Dentistry -- Dental operating light Kommentarfrist: 09.10.2013 ISO/DIS 9680 Dentistry -- Operating lights Kommentarfrist: 06.10.2013 ISO/DIS 9687 Dentistry -- Graphical symbols for dental equipment Kommentarfrist: 27.09.2013 ISO/DIS 10555-6 Intravascular catheters -- Sterile and single-use catheters -- Part 6: Subcutaneous implanted ports Kommentarfrist: 03.10.2013 Listenummer: 10/2013 Side: 19 av 131
11 Helsevesen, Teknikk ISO/DIS 11499 Dental local anaesthetic cartridges Kommentarfrist: 11.09.2013 ISO/DIS 11499 Dentistry -- Single-use cartridges for local anaesthetics Kommentarfrist: 08.09.2013 ISO/DIS 11978 Optics and optical instruments - Contact lenses - Contact lenses and contact lens care products - Information to be supplied by the manufacturer for contact lens wearers Kommentarfrist: 04.09.2013 ISO/DIS 11979-6 Ophthalmic implants -- Intraocular lenses -- Part 6: Shelf-life and transport stability Kommentarfrist: 15.09.2013 ISO/DIS 11979-6 Optics and optical instruments - Intraocular lenses - Part 6: Determination of shelf-life and transport stability Kommentarfrist: 18.09.2013 ISO/DIS 13116 Dentistry -- Test Method for Determining Radio-Opacity of Materials Kommentarfrist: 30.10.2013 ISO/DIS 13212 Optics and optical instruments - Contact lenses and contact lens care products - Test methods for the determination of shelf-life and in-use stability Kommentarfrist: 18.09.2013 ISO/DIS 13212 Ophthalmic optics -- Contact lens care products -- Guidelines for determination of shelf-life Kommentarfrist: 15.09.2013 ISO/DIS 15841 Tannpleie - Kjeveortopedisk materiale - Metalltråd Dentistry -- Orthodontic materials -- Wires Kommentarfrist: 09.10.2013 ISO/DIS 15841 Dentistry -- Wires for use in orthodontics Kommentarfrist: 06.10.2013 ISO/DIS 16443 Dentistry -- Vocabulary of oral implantology Kommentarfrist: 18.09.2013 Listenummer: 10/2013 Side: 20 av 131
11 Helsevesen, Teknikk ISO/DIS 80369-3 Small-bore connectors for liquids and gases in healthcare applications -- Part 3: Connectors for enteral applications Kommentarfrist: 01.01.2014 ISO/DIS 80369-7 Small bore connectors for liquids and gases in healthcare applications -- Part 7: Connectors with 6% (Luer) taper for intravascular or hypodermic applications Kommentarfrist: 04.10.2013 ISO-standarder ISO/TR 24971:2013 Medical devices -- Guidance on the application of ISO 14971 CEN Workshop Agreements CWA 16642:2013 Health care services - Quality criteria for health checks Rapporter fra CEN (CR) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Fastsatte norske standarder NS-EN 1499:2013 Kjemiske desinfeksjonsmidler og antiseptika - Hygiensk håndvask - Prøvingsmetode og krav (fase 2 / trinn 2) Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) NS-EN 1500:2013 Kjemiske desinfeksjonsmidler og antiseptika - Hygienisk hånddesinfeksjon - Prøvingsmetoder og krav (fase 2 / trinn 2) Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2) NS-EN ISO 1797-3:2013 Tannpleie - Skaft for roterende instrumenter - Del 3: Skaft laget av keramikk (ISO 1797-3:2013) Dentistry - Shanks for rotary instruments - Part 3: Shanks made of ceramics (ISO 1797-3:2013) NS-EN ISO 3630-2:2013 Tannpleie - Rotkanalinstrumenter - Del 2: Forlengere (ISO 3630-2:2013) Dentistry - Endodontic instruments - Part 2: Enlargers (ISO 3630-2:2013) Listenummer: 10/2013 Side: 21 av 131
11 Helsevesen, Teknikk NS-EN ISO 6873:2013 Tannpleie - Gipsprodukter (ISO 6873:2013) Dentistry - Gypsum products (ISO 6873:2013) NS-EN ISO 13356:2013 Kirurgiske implantater - Keramiske materialer basert på yttrium-stabilisert tetragonal zirkondioksid (Y-TZP) (ISO 13356:2008) Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO 13356:2008) NS-EN ISO 13408-1:2011/A1:2013 Endringsblad A1 - Aseptisk behandling av helsepleieprodukter - Del 1: Generelle krav (ISO 13408-1:2008/Amd 1:2013) Amendment A1 - Aseptic processing of health care products - Part 1: General requirements (ISO 13408-1:2008/Amd 1:2013) NS-EN ISO 13408-6:2011/A1:2013 Endringsblad A1 - Aseptisk behandling av helsepleieprodukter - Del 6: Isolatorsystemer (ISO 13408-6:2005/Amd 1:2013) Amendment A1 - Aseptic processing of health care products - Part 6: Isolator systems (ISO 13408-6:2005/Amd 1:2013) NS-EN ISO 15197:2013 In vitro-diagnostiske prøvingssystemer - Krav til systemer for egenovervåking av blodsukker ved håndtering av diabetes mellitus (ISO 15197:2013) In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2013) NS-EN ISO 19001:2013 In vitro-diagnostisk medisinsk utstyr - Opplysninger fra produsent av in vitro-diagnostiske reagenser brukt til farging innenfor biologi (ISO 19001:2013) In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology (ISO 19001:2013) NS-EN ISO 20857:2013 Sterilisering av helsetjenesteprodukter - Tørr varme - Krav til utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO 20857:2010) Sterilization of health care products - Dry heat - Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 20857:2010) Tilbaketrukne norske standarder NS-EN 1499:1997 Kjemiske desinfeksjonsmidler og antiseptika - Hygienisk håndvask - Prøvingsmetode og krav (fase 2/trinn 2) Chemical disinfectants and antiseptics - Hygienic handwash - Test method and requirements (phase 2/step 2) NS-EN 1500:1997 Kjemiske desinfeksjonsmidler og antiseptika - Hygienisk hånddesinfeksjon - Prøvingsmetoder og krav (fase 2/trinn 2) Chemical disinfectants and antiseptics - Hygienic handrub - Test method and requirements (phase 2/step 2) Listenummer: 10/2013 Side: 22 av 131
11 Helsevesen, Teknikk NS-EN 12376:1999 In vitro-diagnostisk medisinsk utstyr - Opplysninger fra produsent av in vitro-diagnostiske reagenser brukt til fagring innenfor biologi In vitro diagnostic medical devices - Information supplied by the manufacturer with in vitro diagnostic reagents for staining in biology NS-EN ISO 3630-2:2000 Tannpleie - Rotkanalinstrumenter - Del 2: Forlengere (ISO 3630-2:2000) Dental root-canal instruments - Part 2: Enlargers (ISO 3630-2:2000) NS-EN ISO 6873:2000 Tannpleie - Dentale gipsprodukter (ISO 6873:1998) Dental gypsum products (ISO 6873:1998) NS-EN ISO 15197:2003 In vitro-diagnostiske prøvingssystemer - Krav til systemer for egenovervåking av blodsukker ved håndtering av diabetes mellitus (ISO 15197:2003) - (innbefattet rettelsesblad AC:2005) In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO 15197:2003) - (Corrigendum AC:2005 incorporated) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO 5349-2:2001/prA1 Mekaniske vibrasjoner - Måling og bedømmelse av hvordan håndoverførte vibrasjoner virker inn på mennesker - Del 2: Praktisk veiledning for måling på arbeidsplassen - Endringsblad 1 (ISO 5349-2:2001/DAM 1:2013) Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 2: Practical guidance for measurement at the workplace - Amendment 1 (ISO 5349-2:2001/DAM 1:2013) Kommentarfrist: 02.10.2013 pren 374-2 Vernehansker mot kjemikalier og mikroorganismer - Del 2: Bestemmelse av motstand mot gjennomtrengning Protective gloves against chemicals and micro-organisms - Part 2: Determination of resistance to penetration Kommentarfrist: 09.10.2013 pren 458 Hørselsvern - Anbefalinger for valg, bruk, stell og vedlikehold - Retningslinjer Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document Kommentarfrist: 11.09.2013 pren 1073-1 Vernetøy mot radioaktiv forurensning - Del 1: Krav og prøvingsmetode for ventilert vernetøy mot partikulær radioaktiv forurensning Protective clothing against radioactive contamination - Part 1: Requirements and test methods for ventilated protective clothing against particulate radioactive contamination Kommentarfrist: 13.11.2013 Listenummer: 10/2013 Side: 23 av 131
13 Miljøvern. Helsevern. Sikkerhet pren 13381-9 Prøvingsmetoder for å bestemme bidraget til lastbærende komponenters brannmotstand Del 4: Påført passiv beskyttelse av stålbjelker med åpninger i steget Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings Kommentarfrist: 28.08.2013 pren 14662-3 rev Ambient air -Standard method for the measurement of benzene concentrations - Part 3: Automated pumped sampling with in situ gas chromatography Kommentarfrist: 11.12.2013 pren 15269-11 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance of operable fabric curtains Kommentarfrist: 25.09.2013 pren 16523-2 Determination of material resistance to permeation by chemicals - Part 2: Permeation by gaseous chemical under conditions of continuous contact Kommentarfrist: 02.10.2013 pren 16623 Paints and varnishes - Reactive coatings for fire protection of metallic substrates - Definitions, requirements, characteristics and marking Kommentarfrist: 13.11.2013 pren ISO 14644-12 Cleanrooms and associated controlled environments - Part 12: Classification of air cleanliness by nanoscale particle concentration (ISO/DIS 14644-12:2013) Kommentarfrist: 28.08.2013 pren ISO 16198 Jordkvalitet - Plantebasert biologisk prøving for å bestemme den miljømessige biologiske tilgjengeligheten av sporstoffer for planter (ISO/DIS 16198:2013) Soil quality - Plant-based biotest to assess the environmental bioavailability of trace elements to plants (ISO/DIS 16198:2013) Kommentarfrist: 11.09.2013 pren ISO 16558-1 Soil quality - Risk based petroleum hydrocarbons - Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) (ISO/DIS 16558-1:2013) Kommentarfrist: 23.10.2013 pren ISO 16558-2 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) (ISO/DIS 16558-2:2013) Kommentarfrist: 23.10.2013 Listenummer: 10/2013 Side: 24 av 131
13 Miljøvern. Helsevern. Sikkerhet pren ISO 17628 Geotechnical investigation and testing - Geothermal testing - Determination of thermal conductivity of soil and rock using a borehole heat exchanger (ISO/DIS 17628:2013) Kommentarfrist: 18.10.2013 pren ISO 17892-1 Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 1: Bestemmelse av vanninnhold (ISO/DIS 17892-1:2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO/DIS 17892-1:2013) Kommentarfrist: 04.09.2013 pren ISO 17892-2 Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 2: Bestemmelse av densitet av finkornet jord (ISO/DIS 17892-2:2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil (ISO/DIS 17892-2:2013) Kommentarfrist: 04.09.2013 pren ISO 18674 Geotechnical investigation and testing - Geotechnical monitoring by field instrumentation - General rules (ISO/DIS 18674:2013) Kommentarfrist: 01.01.2014 Standardforslag til høring - internasjonale (ISO) ISO 5349-2:2001/DAmd 1 Kommentarfrist: 02.10.2013 ISO/DIS 5660-1 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 1: Heat release rate (cone calorimeter method) and smoke production rate (dynamic measurement) Kommentarfrist: 14.10.2013 ISO/DIS 5667-14 Water quality -- Sampling -- Part 14: Guidance on quality assurance and quality control of environmental water sampling and handling Kommentarfrist: 07.10.2013 ISO/DIS 11268-3 Soil quality -- Effects of pollutants on earthworms -- Part 3: Guidance on the determination of effects in field situations Kommentarfrist: 14.10.2013 ISO/DIS 11611.2 Protective clothing for use in welding and allied processes Kommentarfrist: 15.09.2013 ISO/DIS 14644-12 Cleanrooms and associated controlled environments -- Part 12: Classification of air cleanliness by nanoscale particle concentration Kommentarfrist: 28.08.2013 Listenummer: 10/2013 Side: 25 av 131
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 16198 Soil quality -- Plant-based biotest to assess the environmental bioavailability of trace elements to plants Kommentarfrist: 11.09.2013 ISO/DIS 16558-1 Soil quality -- Risk based petroleum hydrocarbons -- Part 1: Determination of aliphatic and aromatic fractions of volatile petroleum hydrocarbons using gas chromatography (static headspace method) Kommentarfrist: 23.10.2013 ISO/DIS 16558-2 Soil quality -- Risk-based petroleum hydrocarbons -- Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionisation detection (GC/FID) Kommentarfrist: 23.10.2013 ISO/DIS 16778 Water quality -- Calanoid copepod development test with Acartia tonsa Kommentarfrist: 18.09.2013 ISO/DIS 17244 Water quality -- Bio-indicator of potential toxicity in aqueous media -- Determination of the potential toxicity of aqueous samples on bivalve embryo-larval development Kommentarfrist: 07.09.2013 ISO/DIS 17289 Water quality -- Determination of dissolved oxygen -- Optical sensor method Kommentarfrist: 27.08.2013 ISO/DIS 17554 Reaction to fire tests -- Mass loss measurement Kommentarfrist: 17.10.2013 ISO/DIS 17628 Geotechnical investigation and testing -- Geothermal testing -- Determination of thermal conductivity of soil and rock using a borehole heat exchanger Kommentarfrist: 18.10.2013 ISO/DIS 18309 Ships and marine technology -- Incinerator sizing and selection -- Guidelines Kommentarfrist: 16.10.2013 ISO/DIS 18674 Geotechnical investigation and testing -- Geotechnical monitoring by field instrumentation -- General rules Kommentarfrist: 01.01.2014 ISO/DIS 19700 Controlled equivalence ratio method for the determination of hazardous components of fire effluents -- The steady state tube furnace Kommentarfrist: 02.10.2013 Listenummer: 10/2013 Side: 26 av 131
13 Miljøvern. Helsevern. Sikkerhet ISO-standarder ISO/TR 22899-2:2013 Determination of the resistance to jet fires of passive fire protection -- Part 2: Guidance on classification and implementation methods Rapporter fra CEN (CR) CEN ISO/TS 15011-6:2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) CEN ISO/TR 7250-2:2011/A1:2013 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013) CEN ISO/TS 15011-6:2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS 15011-6:2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) CEN/TR 1317-6:2012 Skadereduserende vegtiltak - Del 6: Fotgjengerrekkverk / Road restraint systems - Part 6: Pedestrian restraint system, Pedestrian Parapet Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets CEN/TR 15120:2013 Tanker for transport av farlig gods - Retningslinjer og anbefalinger for lasting, transport og lossing Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading CEN/TR 15350:2013 Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16176:2011 Karakterisering av avfall Screeningsmetode for grunnstoffsammensetning ved bruk av røntgenfluorescensspektrometri for verifisering på stedet Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification Listenummer: 10/2013 Side: 27 av 131