Annonseringsdato: 2010-03-25 Listenummer: 06/2010 Standardiseringsprosjekter og nye standarder Listenummer: 06/2010 Side: 1 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren 1089-3 Transportable gassflasker - Kjennetegn (unntatt LPG) - Del 3: Fargekoding Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Kommentarfrist: 04.08.2010 pren 1089-3 Transportable gassflasker - Kjennetegn (unntatt LPG) - Del 3: Fargekoding Transportable gas cylinders - Gas cylinder identification (excluding LPG) - Part 3: Colour coding Kommentarfrist: 04.08.2010 pren 13710 Europeiske alfabetiseringsregler - Sortering av tegn fra latinsk, gresk, kyrillisk, georgisk og armens skrift European Ordering Rules - Ordering of characters from Latin, Greek, Cyrillic, Georgian and Armenian scripts Kommentarfrist: 05.04.2010 pren 16016-1 Non destructive testing - Radiation method - Computed tomography - Part 1: Terminology Kommentarfrist: 29.03.2010 pren 16018 Non-destructive testing - Terminology - Terms used in ultrasonic testing with phased arrays Kommentarfrist: 12.04.2010 pren ISO 9092 Tekstiler - Ikke-vevd materiale (florstoff) - Definisjon (ISO/DIS 9092:2010) Textiles - Nonwoven - Definition (ISO/DIS 9092:2010) Kommentarfrist: 04.08.2010 Standardforslag til høring - internasjonale (ISO) ISO 7010:2003/DAmd 66 Safety sign E016: Emergency window with escape ladder Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 67 Safety sign E017: Rescue window Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 68 Safety sign E018: Turn anticlockwise to open Kommentarfrist: 14.05.2010 Listenummer: 06/2010 Side: 2 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2003/DAmd 69 Safety sign E019: Turn clockwise to open Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 70 Safety sign M024: Use this walkway Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 71 Safety sign P025: Do not use this incomplete scaffold Kommentarfrist: 30.05.2010 ISO 7010:2003/DAmd 72 Safety sign P026: Do not use this device in a bathtub, shower or water-filled reservoir Kommentarfrist: 30.05.2010 ISO 7010:2003/DAmd 73 Safety sign P027: Do not use this lift for people Kommentarfrist: 30.05.2010 ISO 7010:2003/DAmd 74 Safety sign P028: Do not wear gloves Kommentarfrist: 30.05.2010 ISO 7010:2003/DAmd 75 Safety sign P029: No photography Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 76 Safety sign W026: Warning; Battery charging Kommentarfrist: 14.05.2010 ISO 7010:2003/DAmd 77 Safety sign W029: Warning; Pressurized cylinder Kommentarfrist: 14.05.2010 ISO 12756:1998/DAmd 1 Viscosity of the ink Kommentarfrist: 15.07.2010 ISO/DIS 7010 Graphical symbols -- Safety signs in workplaces and public areas Kommentarfrist: 06.04.2010 ISO/DIS 7010 Graphical symbols -- Safety colours and safety signs -- Registered safety signs Kommentarfrist: 06.04.2010 Listenummer: 06/2010 Side: 3 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 8965 Logging industry -- Technology -- Terms and definitions Kommentarfrist: 15.06.2010 ISO/DIS 9092 Textiles -- Nonwoven -- Definition Kommentarfrist: 04.08.2010 ISO/DIS 11485-1 Glass in building -- Curved glass -- Part 1: Terminology and definitions Kommentarfrist: 08.08.2010 ISO/DIS 12651-1 Electronic document management -- Vocabulary -- Part 1: Electronic document imaging Kommentarfrist: 22.06.2010 ISO/DIS 16175-1 Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 1: Overview and statement of principles Kommentarfrist: 31.05.2010 ISO/DIS 16175-2 Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 2: Guidelines and functional requirements for records in electronic office environments Kommentarfrist: 31.05.2010 ISO/DIS 16175-3 Information and documentation -- Principles and functional requirements for records in electronic office environments -- Part 3: Guidelines and functional requirements for records in business systems Kommentarfrist: 31.05.2010 ISO/DIS 24294 Round and sawn timber -- Vocabulary Kommentarfrist: 28.07.2010 ISO/DIS 24616 Språkressurser -- Rammeverk for flerspråklig informasjon Linguistic resources management -- Multilingual information framework Kommentarfrist: 23.04.2010 ISO/DIS 26800 Ergonomics -- General approach, principles and concepts Kommentarfrist: 12.04.2010 ISO/DIS 29464 Renseutstyr for luft og andre gasser -- terminologi Cleaning equipment for air and other gases -- Terminology Kommentarfrist: 20.04.2010 Listenummer: 06/2010 Side: 4 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 29845 Technical product documentation -- Document types Kommentarfrist: 11.05.2010 ISO-standarder ISO 6422-1:2010 Layout key for trade documents -- Part 1: Paper-based documents Erstatter A00008:20:012770 ISO 9211-1:2010 Optics and photonics -- Optical coatings -- Part 1: Definitions Erstatter A00008:20:016838 ISO 10243:2010 Tools for pressing -- Compression springs with rectangular section -- Housing dimensions and colour coding Erstatter A00008:20:018282 ISO 10579:2010 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Non-rigid parts Erstatter A00008:20:018663 ISO 15519-1:2010 Specification for diagrams for process industry -- Part 1: General rules ISO 22745-2:2010 Industrial automation systems and integration -- Open technical dictionaries and their application to master data -- Part 2: Vocabulary Erstatter A00008:20:051855 ISO 28238:2010 Compression and injection moulds -- Components for gating systems ISO/TS 22745-2:2009 Industrial automation systems and integration -- Open technical dictionaries and their application to master data -- Part 2: Vocabulary Rapporter fra CEN (CR) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) Listenummer: 06/2010 Side: 5 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN/TS 15810:2008 Grafiske symboler for bruk på utstyr i integrerte tekniske bygningsinstallasjoner ITB Graphical symbols for use on integrated building automation equipment Fastsatte norske standarder NS-EN 267:2009 Automatiske viftebrennere for flytende brennstoff Automatic forced draught burners for liquid fuels NS-EN 14232:2009 Avanserte tekniske keramer - Termer, definisjoner og forkortelser Advanced technical ceramics - Terms, definitions and abbreviations NS-EN 15714-1:2009 Industriventiler - Aktuatorer - Del 1: Terminologi og definisjoner Industrial valves - Actuators - Part 1: Terminology and definitions NS-EN 15826:2009 Glasserte emaljer og porselensemaljer - Terminologi Vitreous and porcelain enamels - Terminology NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) NS-EN ISO 10991:2009 Mikroprosessteknikk - Terminologi (ISO 10991:2009) Micro process engineering - Vocabulary (ISO 10991:2009) NS-EN ISO 12706:2009 Ikke-destruktiv prøving - Penetrantprøving - Ordliste (ISO 12706:2009) Non-destructive testing - Penetrant testing - Vocabulary (ISO 12706:2009) Tilbaketrukne norske standarder NS 8351:1991 Byggetegninger - Data-assistert konstruksjon (DAK) - Lagdeling Building drawings - Computer aided design (CAD) - Layers Språk: no NS-EN 267:1999 Oljebrennere med vifte - Definisjoner, krav, prøving, merking Forced draught oil burners - Definitions, requirements, testing, marking Listenummer: 06/2010 Side: 6 av 178
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 375:2001 Informasjon fra produsenten av in vitro diagnostiske reagenser til profesjonell bruk Information supplied by the manufacturer with in vitro diagnostic reagents for professional use NS-EN ISO 1942-5:1994 Tannpleie - Terminologi - Del 5: Termer i forbindelse med prøving (ISO 1942-5:1989) Dental vocabulary - Part 5: Terms associated with testing (ISO 1942-5:1989) NS-EN ISO 12706:2000 Ikke-destruktiv prøving - Terminologi - Termer benyttet ved penetrantprøving (ISO 12706:2000) Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000) Språk: no/en NS-ISO 1942-1:1989 Tannpleie - Terminologi - Del 1: Generelle og kliniske termer - (= EN 21942-1:1991) (ISO 1942-1:1989) Dental vocabulary - Part 1: General and clinical terms - (= EN 21942-1:1991) (ISO 1942-1:1989) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 14169-2 Protection Profile for Secure signature creation device - Part 2: Device with key generation Kommentarfrist: 28.07.2010 pren 15722 Road transport and traffic telematics - ESafety - ECall minimum set of data Kommentarfrist: 11.07.2010 pren 16062 Intelligent transport systems - ESafety - ECall high level application requirements (HLAP) Kommentarfrist: 11.07.2010 pren 16072 Intelligent transport systems - ESafety - Pan European ecall-operating requirements Kommentarfrist: 11.07.2010 pren 16082 Provision of aviation security services Kommentarfrist: 11.08.2010 Listenummer: 06/2010 Side: 7 av 178
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren ISO 11354-1 Avanserte automasjonsteknologier og deres anvendelser - Del 1: Rammeverk for interoperabilitet mellom virksomheter Advanced automation technologies and their applications - Part 1: Framework for enterprise interoperability (ISO/DIS 11354-1:2009) Kommentarfrist: 12.04.2010 pren ISO 14825 Geografiske datafiler - GDF5.0 (ISO/DIS 14825:2010) Geographic Data Files - GDF5.0 (ISO/DIS 14825:2010) Kommentarfrist: 07.06.2010 Standardforslag til høring - internasjonale (ISO) ISO/DIS 13289 Recreational diving services -- Requirements for the conduct of snorkelling excursions (service provision) Kommentarfrist: 04.07.2010 ISO/DIS 13970 Recreational diving services -- Requirements for the training of recreational snorkelling guides Kommentarfrist: 04.07.2010 ISO/DIS 14825 Intelligent transport systems -- Geographic Data Files (GDF) -- Overall data specification Kommentarfrist: 31.05.2010 ISO/DIS 14825 Geographic Data Files - GDF5.0 Kommentarfrist: 31.05.2010 ISO/DIS 29283 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20 Kommentarfrist: 13.04.2010 ISO-standarder ISO 25112:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Mobile wireless broadband using IEEE 802.16 ISO 25113:2010 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Mobile wireless broadband using HC-SDMA ISO 28640:2010 Random variate generation methods ISO/TS 13141:2010 Electronic fee collection -- Localisation augmentation communication for autonomous systems Listenummer: 06/2010 Side: 8 av 178
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN Workshop Agreements CWA 16073-0:2010 Business Interoperability Interfaces for Public procurement in Europe - Part 0: Introduction CWA 16073-1:2010 Business Interoperability Interfaces for Public procurement in Europe - Part 1: Profile overview CWA 16073-2:2010 Business Interoperability Interfaces for Public procurement in Europe - Part 2: Convergence and gap analyses CWA 16073-3:2010 Business Interoperability Interfaces for Public procurement in Europe Part 3: Toolbox Requirements CWA 16073-4:2010 Business Interoperability Interfaces for Public procurement in Europe Part 4: Evaluation guidelines for testing and piloting Rapporter fra CEN (CR) CEN ISO/TS 12813:2009 Elektronisk avgiftsinnkreving (EFC) - Kontroll av samsvar for kommunikasjon i autonome EFC systemer Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009) CEN ISO/TS 13141:2010 Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/DTS 13141:2009) Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/TS 13141:2010) CEN ISO/TS 17574:2009 Veitransporttelematikk - Elektronisk avgiftsinnkreving (EFC) - Retningslinjer for EFC sikkerhetsprofiler Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2009) CEN ISO/TS 24534-3:2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 3: Kjøretøydata Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 3: Vehicle data (ISO/TS 24534-3:2008) CEN ISO/TS 24534-4:2008 Automatisk kjøretøy- og utstyrsidentifisering - Elektronisk registrering (ERI) for kjøretøy - Del 4: Sikker kommunikasjon ved bruk av asymmetrisk teknikk Automatic vehicle and equipment identification - Electronic Registration Identification (ERI) for vehicles - Part 4: Secure communications using asymmetrical techniques (ISO/TS 24534-4:2008) CEN ISO/TS 25110:2008 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (OBU) med kortleser Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2008) Listenummer: 06/2010 Side: 9 av 178
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 10345:2008 Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR 14383-7:2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination CEN/TR 15735:2008 Postal services - Quality of service - Distance to access points CEN/TS 15511:2008 Posttjenester - Tjenestekvalitet - Tilgjengelig informasjon om posttjenester Postal services - Quality of service - Information available on postal services CEN/TS 15722:2009 Veitransporttelematikk - ESikkerhet - Mangler Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) CEN/TS 15873:2009 Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation CEN/TS 99001:2008 Business support - Support services provided to small enterprises - Terminology, quality and performance Fastsatte norske standarder NS-EN ISO 24978:2009 Intelligente transportsystemer - Sikkerhets- og nødmeldinger med ITS ved bruk av tilgjengelige trådløse medier - Prosedyrer for dataregister (ISO 24978:2009) Intelligent transport systems - ITS Safety and emergency messages using any available wireless media - Data registry procedures (ISO 24978:2009) 07 Matematikk. Naturvitenskap ISO-standarder ISO/TS 10272-3:2010 Microbiology of food and animal feeding stuffs -- Horizontal method for detection and enumeration of Campylobacter spp. -- Part 3: Semi-quantitative method Listenummer: 06/2010 Side: 10 av 178
07 Matematikk. Naturvitenskap Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010 Fôr- og næringsmiddelmikrobiologi Horisontal metode for bestemmelse og telling av Campylobacter ssp. Del 3: Semikvantitativ bestemmelse Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method (ISO/TS 10272-3:2010) CEN ISO/TS 11133-1:2009 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2009) CEN ISO/TS 27687:2008 Nanoteknologi - Terminologi and definisjoner for nanopartikler (ISO/TS 27687:2007) Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplat (ISO/TS 27687:2008) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TR 15996:2010 Hydrometry - Measurement of snow water equivalent using snow mass registration devices CEN/TS 15790:2008 Dyrefôr - PCR typing av probiotiske Saccharomyces cerevisiae (gjær) Animal feeding stuffs - PCR typing of probiotic strains of Saccharomyces cerevisiae (yeast) Fastsatte norske standarder NS-EN ISO 11737-2:2009 Sterilisering av medisinsk utstyr - Mikrobiologiske metoder - Del 2: Prøving av sterilitet brukt i definisjon, validering og vedlikehold av en steriliseringsprosess (ISO 11737-2:2009) Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) Tilbaketrukne norske standarder NS-EN ISO 11737-2:2000 Sterilisering av medisinsk utstyr - Mikrobiologiske metoder - Del 2: Sterilitetsprøving brukt i validering av en steriliseringsprosess (ISO 11737-2:1998) Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998) Listenummer: 06/2010 Side: 11 av 178
11 Helsevesen, Teknikk 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 11979-8:2009/prA1 Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav - Endringsblad 1 (ISO 11979-8:2009/DAM 1:2010) Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements - Amendment 1 (ISO 11979-8:2009/DAM 1:2010) Kommentarfrist: 21.06.2010 EN ISO 15912:2006/prA1 Tannpleie - Støpeinvestment og varmebestandig modellmateriale - Endringsblad 1 (ISO 15912:2006/DAM 1:2010) Dentistry - Casting investments and refractory die materials - Amendment 1 (ISO 15912:2006/DAM 1:2010) Kommentarfrist: 14.06.2010 EN ISO 21671:2006/prA1 Tannpleie - Roterende poleringsinstrumenter - Endringsblad 1 (ISO 21671:2006/DAM 1:2009) Dentistry - Rotary polishers - Amendment 1 (ISO 21671:2006/DAM 1:2009) Kommentarfrist: 03.05.2010 EN ISO 24234:2004/prA1 Dentistry - Mercury and alloys for dental amalgam - Amendment 1: Requirements for marking and manufacturer's instructions concerning mercury (ISO 24234:2004/DAM 1:2010) Kommentarfrist: 07.06.2010 pren 1865-3 Patient handling equipment used in road ambulances - Part 3: Heavy duty stretcher Kommentarfrist: 04.08.2010 pren 1865-4 Patient handling equipment used in road ambulances - Part 4: Mechanical assisted transfer chair Kommentarfrist: 04.08.2010 pren 1865-5 Patient handling equipment used in road ambulances - Part 5: Stretcher support Kommentarfrist: 04.08.2010 pren 13624 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of fungicidal or yeasticidal activity in the medical area - Test method and requirements (phase 2, step 1) Kommentarfrist: 21.06.2010 pren 13727 Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity in the medical area - Test method and requirements (phase 2, step 1) Kommentarfrist: 19.04.2010 Listenummer: 06/2010 Side: 12 av 178
11 Helsevesen, Teknikk pren ISO 3107 Tannpleie - Sinkoksid/eugenol-sementer og sinkoksid/eugenolfrie sementer (ISO/DIS 3107:2009) Dentistry - Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements (ISO/DIS 3107:2009) Kommentarfrist: 05.04.2010 pren ISO 10685-1 Ophthalmic optics - Spectacle frames and sunglasses electronic catalogue and identification - Part 1: Product identification and electronic catalogue product hierarchy (ISO/DIS 10685-1:2010) Kommentarfrist: 28.07.2010 pren ISO 23640 In vitro diagnostic medical devices - Stability testing of in vitro diagnostic reagents (ISO/DIS 23640:2009) Kommentarfrist: 19.04.2010 Standardforslag til høring - internasjonale (ISO) ISO 11979-8:2006/DAmd 1 Kommentarfrist: 21.06.2010 ISO 15912:2006/DAmd 1 Kommentarfrist: 14.06.2010 ISO 21671:2006/DAmd 1 Kommentarfrist: 03.05.2010 ISO 24234:2004/DAmd 1 Requirements for marking and manufacturer's instructions concerning mercury Kommentarfrist: 07.06.2010 ISO/DIS 3107 Dentistry -- Zinc oxide/eugenol and zinc oxide/non-eugenol dental cements Kommentarfrist: 05.04.2010 ISO/DIS 3107 Dentistry -- Zinc oxide/eugenol cements and zinc oxide/non-eugenol cements Kommentarfrist: 05.04.2010 ISO/DIS 10685-1 Ophthalmic optics -- Spectacle frames and sunglasses electronic catalogue and identification -- Part 1: Product identification and electronic catalogue product hierarchy Kommentarfrist: 28.07.2010 ISO/DIS 11040-2 Prefilled syringes -- Part 2: Plunger stoppers for dental local anaesthetic cartridges Kommentarfrist: 16.07.2010 Listenummer: 06/2010 Side: 13 av 178
11 Helsevesen, Teknikk ISO/DIS 11040-5 Prefilled syringes -- Part 5: Plunger stoppers for injectables Kommentarfrist: 16.07.2010 ISO/DIS 12891-1 Implants for surgery -- Retrieval and analysis of surgical implants -- Part 1: Retrieval and handling Kommentarfrist: 05.06.2010 ISO/DIS 13926-2 Pen systems -- Part 2: Plungers stoppers for pen-injectors for medical use Kommentarfrist: 16.07.2010 ISO/DIS 20126 Dentistry -- Physical properties of manual toothbrushes Kommentarfrist: 11.08.2010 ISO/DIS 23640 In vitro diagnostic medical devices -- Stability testing of in vitro diagnostic reagents Kommentarfrist: 19.04.2010 ISO-standarder ISO 6474-1:2010 Implants for surgery -- Ceramic materials -- Part 1: Ceramic materials based on high purity alumina Erstatter A00008:20:012837 ISO 7396-1:2007/Amd 2:2010 ISO 7885:2010 Dentistry -- Sterile injection needles for single use Erstatter A00008:20:030575 ISO 8536-2:2010 Infusion equipment for medical use -- Part 2: Closures for infusion bottles Erstatter A00008:20:033078,A00008:20:037969 ISO 10993-16:2010 Biological evaluation of medical devices -- Part 16: Toxicokinetic study design for degradation products and leachables Erstatter A00008:20:022695 ISO 14708-5:2010 Implants for surgery -- Active implantable medical devices -- Part 5: Circulatory support devices ISO 14708-6:2010 Implants for surgery -- Active implantable medical devices -- Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators) Listenummer: 06/2010 Side: 14 av 178
11 Helsevesen, Teknikk ISO 20795-2:2010 Dentistry -- Base polymers -- Part 2: Orthodontic base polymers ISO 27186:2010 Active implantable medical devices -- Four-pole connector system for implantable cardiac rhythm management devices - Dimensional and test requirements ISO 27427:2010 Anaesthetic and respiratory equipment -- Nebulizing systems and components Erstatter A00008:20:044150 ISO 28620:2010 Medical devices -- Non-electrically driven portable infusion devices Rapporter fra CEN (CR) CEN ISO/TS 11135-2:2008 Sterilisering av helsetjenesteprodukter Etylenoksid Del 2: Retningslinjer for anvendelse av ISO 11135-1 (ISO/DTS 11135-2:2008) Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008) CEN ISO/TS 11135-2:2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008/Cor 1:2009) CEN ISO/TS 17665-2:2009 Sterilisering av helsetjenesteprodukter - Fuktig varme - Del 2: Veiledning for bruk av ISO 17665-1 (ISO/DTS 17665-2:2008) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) CEN ISO/TS 22367:2010 Medisinske laboratorier - Reduksjon av feil ved risikostyring og kontinuerlig forbedring(iso/ts 22367:2008, inkludert Cor 1:2009) Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) CEN/TR 12401:2009 Tannpleie - Veiledning for klassifisering av medisinsk utstyr brukt i tannpleien Dentistry - Guidance on the classification of dental devices and accessories CEN/TR 15753:2008 Emballasje - Pakningsvedlegg til medisiner - Braille og andre skriftformater for synshemmede Packaging - Package leaflets for medicinal products - Braille and other formats for visually impaired people CEN/TR 15831:2009 Metode for kompresjonsprøving av strømper til medisinsk bruk Method for testing compression in medical hosiery Listenummer: 06/2010 Side: 15 av 178
11 Helsevesen, Teknikk CEN/TR 15913:2009 Kriterier for utforming av tilskueranlegg for tilskuere med nedsatt funksjonsevne Spectator facilities - Layout criteria for viewing area for spectators with special needs CEN/TS 15209:2008 Følbare overflateindikatorer på belegningsprodukter av betong, tegl og naturstein Tactile paving surface indicators produced from concrete, clay and stone Fastsatte norske standarder NS-EN 455-2:2009 Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper Medical gloves for single use - Part 2: Requirements and testing for physical properties NS-EN 1060-1:1995+A2:2009 Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Non-invasive sphygmomanometers - Part 1: General requirements NS-EN 1060-2:1995+A1:2009 Ikke-invasive blodtrykksmålere - Del 2: Tilleggskrav for mekaniske blodtrykksmålere Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers NS-EN 1060-3:1997+A2:2009 Ikke-invasive blodtrykksmålere - Del 3: Tilleggskrav for elektromekaniske blodtrykksmålesystemer Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems NS-EN 1639:2009 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Instrumenter Dentistry - Medical devices for dentistry - Instruments NS-EN 1640:2009 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Utstyr Dentistry - Medical devices for dentistry - Equipment NS-EN 1641:2009 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Materialer Dentistry - Medical devices for dentistry - Materials NS-EN 1642:2009 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Dentale implantater Dentistry - Medical devices for dentistry - Dental implants NS-EN 1656:2009 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitative suspensjonsprøvinger til evaluering av baktericidal aktivitet på kjemiske desinfeksjonsmidler og antiseptika brukt i veterinærmedisin - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in the veterinary area - Test method and requirements (phase 2, step 1) Listenummer: 06/2010 Side: 16 av 178
11 Helsevesen, Teknikk NS-EN 15333-1:2008/AC:2009 Rettelsesblad AC- Åndedrettsutstyr - Slangeforsynt kretsløpapparat, åpen krets, med komprimert gass for dykking - Del 1: Forbrukstyrt utstyr Corrigendum AC - Respiratory equipment - Open-circuit umbilical supplied compressed gas diving apparatus - Part 1: Demand apparatus NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) NS-EN ISO 4049:2009 Tannpleie - Polymerbaserte restaureringsmaterialer (ISO 4049:2009) Dentistry - Polymer-based restorative materials (ISO 4049:2009) NS-EN ISO 8362-1:2009 Injeksjonsbeholdere og tilbehør - Del 1: Hetteglass laget av glassrør (ISO 8362-1:2009) Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2009) NS-EN ISO 8612:2009 Øyeoptiske instrumenter - Tonometre (ISO 8612:2009) Ophthalmic instruments - Tonometers (ISO 8612:2009) NS-EN ISO 9801:2009 Øyeoptiske instrumenter - Prøvekasselinser (ISO 9801:2009) Ophthalmic instruments - Trial case lenses (ISO 9801:2009) NS-EN ISO 10993-7:2008/AC:2009 Rettelsesblad AC - Biologisk evaluering av medisinsk utstyr - Del 7: Rester etter etylenoksidsterilisering - Teknisk rettelsesblad 1 (ISO 10993-7:2008/Cor 1:2009) Corrigendum AC - Biological evaluation of medical devices - Part 7: Ethylene oxide sterilization residuals - Technical Corrigendum 1 (ISO 10993-7:2008/Cor 1:2009) NS-EN ISO 11737-2:2009 Sterilisering av medisinsk utstyr - Mikrobiologiske metoder - Del 2: Prøving av sterilitet brukt i definisjon, validering og vedlikehold av en steriliseringsprosess (ISO 11737-2:2009) Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2009) NS-EN ISO 11980:2009 Øyeoptikk - Kontaktlinser og produkter for kontaktlinsebehandling - Veiledning for klinisk utprøving (ISO 11980:2009) Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:2009) NS-EN ISO 14937:2009 Sterilisering av helsetjenesteprodukter - Generelle krav til karakterisering av et steriliserende agens samt utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO 14937:2009) Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2009) Listenummer: 06/2010 Side: 17 av 178
11 Helsevesen, Teknikk NS-EN ISO 18113-1:2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 1: Termer, definisjoner og generelle krav (ISO 18113-1:2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 1: Terms, definitions and general requirements (ISO 18113-1:2009) NS-EN ISO 18113-2:2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (Merking) - Del 2: In vitro-diagnostiske reagenser for yrkesbruk (ISO 18113-2:2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 2: In vitro diagnostic reagents for professional use (ISO 18113-2:2009) NS-EN ISO 18113-3:2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 3: In vitro-diagnostiske instrumenter for yrkesbruk (ISO 18113-3:2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 3: In vitro diagnostic instruments for professional use (ISO 18113-3:2009) NS-EN ISO 18113-4:2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 4: In vitro-diagnostiske reagenser for egenprøving (ISO 18113-4:2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 4: In vitro diagnostic reagents for self-testing (ISO 18113-4:2009) NS-EN ISO 18113-5:2009 In vitro-diagnostisk medisinsk utstyr - Produsentinformasjon (merking) - Del 5: In vitro-diagnostiske instrumenter for egenprøving (ISO 18113-5:2009) In vitro diagnostic medical devices - Information supplied by the manufacturer (labelling) - Part 5: In vitro diagnostic instruments for self-testing (ISO 18113-5:2009) NS-EN ISO 21533:2003/AC:2009 Rettelsesblad AC - Tannpleie - Sprøyter for intraligamentær injeksjon til gjenbruk - Teknisk rettelsesblad 1 (ISO 21533:2003/Cor 1:2009) Corrigendum AC - Dentistry - Reusable cartridge syringes intended for intraligamentary injections - Technical Corrigendum 1 (ISO 21533:2003/Cor 1:2009) NS-EN ISO 21969:2009 Fleksible høytrykksforbindelser til bruk i systemer for medisinsk gass (ISO 21969:2009) High-pressure flexible connections for use with medical gas systems (ISO 21969:2009) NS-EN ISO 21987:2009 Øyeoptikk - Monterte briller (ISO 21987:2009) Ophthalmic optics - Mounted spectacle lenses (ISO 21987:2009) NS-EN ISO 26782:2009/AC:2009 Rettelsesblad AC - Anestesi- og respirasjonsutstyr - Spirometre for vurdering av lungefunksjon - Teknisk rettelsesblad 1 (ISO 26782:2009/Cor 1:2009) Corrigendum AC - Anaesthetic and respiratory equipment - Spirometers intended for the measurement of time forced expired volumes in humans - Technical Corrigendum 1 (ISO 26782:2009/Cor 1:2009) Listenummer: 06/2010 Side: 18 av 178
11 Helsevesen, Teknikk Tilbaketrukne norske standarder NS-EN 375:2001 Informasjon fra produsenten av in vitro diagnostiske reagenser til profesjonell bruk Information supplied by the manufacturer with in vitro diagnostic reagents for professional use NS-EN 376:2002 Informasjon fra produsenten om in vitro-diagnostiske reagenser til selvtesting Information supplied by the manufacturer with in vitro diagnostic reagents for self-testing NS-EN 455-2:2000 Engangshansker til medisinsk bruk - Del 2: Krav til og prøving av fysiske egenskaper (inkludert rettelsesblad AC:1996) Medical gloves for single use - Part 2: Requirements and testing for physical properties (including Technical Corrigendum AC:1996) NS-EN 591:2001 Bruksanvisning for utstyr til in vitro-diagnostisk bruk for fagpersonale Instructions for use for in vitro diagnostic instruments for professional use NS-EN 592:2002 Bruksanvisninger for in vitro-diagnostiske instrumenter til selvtesting Instructions for use for in vitro diagnostic instruments for self-testing NS-EN 1060-3:1997/A1:2005 Endringsblad A1 - Ikke-invasive blodtrykksmålere - Del 3: Tilleggskrav for elektromekaniske blodtrykksmålesystemer Amendment A1 - Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems NS-EN 1060-1:1995 Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Non-invasive sphygmomanometers - Part 1: General requirements NS-EN 1060-1:1995/A1:2002 Endringsblad A1 - Ikke-invasive blodtrykksmålere - Del 1: Generelle krav Amendment A1 - Non-invasive sphygmomanometers - Part 1: General requirements NS-EN 1060-2:1995 Ikke-invasive blodtrykksmålere - Del 2: Tilleggskrav for mekaniske blodtrykksmålere (innbefattet rettelsesblad AC:2002) Non-invasive sphygmomanometers - Part 2: Supplementary requirements for mechanical sphygmomanometers (Corrigendum AC:2002 incorporated) Listenummer: 06/2010 Side: 19 av 178
11 Helsevesen, Teknikk NS-EN 1060-3:1997 Ikke-invasive blodtrykksmålere - Del 3: Tilleggskrav for elektromekaniske blodtrykksmålesystemer Non-invasive sphygmomanometers - Part 3: Supplementary requirements for electro-mechanical blood pressure measuring systems NS-EN 1639:2004 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Instrumenter Dentistry - Medical devices for dentistry - Instruments NS-EN 1640:2004 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Utstyr Dentistry - Medical devices for dentistry - Equipment NS-EN 1641:2004 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Materialer Dentistry - Medical devices for dentistry - Materials NS-EN 1642:2004 Tannpleie - Medisinsk utstyr til bruk i tannpleie - Dentale implantater Dentistry - Medical devices for dentistry - Dental implants NS-EN 1656:2000 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonstest til evaluering av baktericidal aktivitet på kjemiske desinfeksjonsmidler og antiseptika brukt i veterinærmedisin - Prøvingsmetode og krav (fase 2/trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of bactericidal activity of chemical disinfectants and antiseptics used in veterinary field - Test method and requirements (phase 2/step 1) NS-EN ISO 4049:2000 Tannpleie - Polymerbaserte fyllings-, restaurerings- og sementeringsmaterialer (ISO 4049:2000) Dentistry - Polymer-based filling, restorative and luting materials (ISO 4049:2000) NS-EN ISO 8362-1:2004 Injeksjonsbeholdere og tilbehør - Del 1: Hetteglass laget av glassrør (ISO 8362-1:2003) Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO 8362-1:2003) NS-EN ISO 8612:2001 Øyeoptikk - Øyeoptiske instrumenter - Tonometre (ISO 8612:2001) Ophthalmic instruments - Tonometers (ISO 8612:2001) Listenummer: 06/2010 Side: 20 av 178
11 Helsevesen, Teknikk NS-EN ISO 9801:1999 Øyeoptikk - Instrumenter - Prøvekasselinser (ISO 9801:1997) Ophthalmic instruments - Trial case lenses (ISO 9801:1997) NS-EN ISO 11737-2:2000 Sterilisering av medisinsk utstyr - Mikrobiologiske metoder - Del 2: Sterilitetsprøving brukt i validering av en steriliseringsprosess (ISO 11737-2:1998) Sterilization of medical devices - Microbiological methods - Part 2: Tests of sterility performed in the validation of a sterilization process (ISO 11737-2:1998) NS-EN ISO 11980:1997 Øyeoptikk - Kontaktlinser og kontaktlinsebehandlingsprodukter - Veiledning for klinisk utprøving (ISO 11980:1997) Ophthalmic optics - Contact lenses and contact lens care products - Guidance for clinical investigations (ISO 11980:1997) NS-EN ISO 14937:2000 Sterilisering av helsetjenesteprodukter - Generelle krav til karakterisering av et steriliserende agens samt utvikling, validering og rutinekontroll av en steriliseringsprosess for medisinsk utstyr (ISO 14937:2000) - (innbefattet rettelsesblad AC:2005) Sterilization of health care products - General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices (ISO 14937:2000) - (Corrigendum AC:2005 incorporated) NS-EN ISO 21969:2006 Fleksible høytrykksforbindelser til bruk i systemer for medisinsk gass (ISO 21969:2005) High-pressure flexible connections for use with medical gas systems (ISO 21969:2005) NS-ISO 1942-1:1989 Tannpleie - Terminologi - Del 1: Generelle og kliniske termer - (= EN 21942-1:1991) (ISO 1942-1:1989) Dental vocabulary - Part 1: General and clinical terms - (= EN 21942-1:1991) (ISO 1942-1:1989) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO 14021:2001/prA1 Environmental labels and declarations - Self-declared environmental claims (Type II environmental labelling) - Amendment 1 (ISO 14021:1999/DAM 1:2009) Kommentarfrist: 05.04.2010 pren 1366-2 Prøving av brannmotstanden til tekniske installasjoner - Del 2: Brannspjeld Fire resistance tests for service installations - Part 2: Fire dampers Kommentarfrist: 11.07.2010 Listenummer: 06/2010 Side: 21 av 178
13 Miljøvern. Helsevern. Sikkerhet pren 1598 Helse og sikkerhet ved sveising og beslektede metoder - Transparente sveiseforheng, strips og mobile sveiseforheng for lysbuesveising Health and safety in welding and allied processes - Transparent welding curtains, strips and screens for arc welding processes Kommentarfrist: 18.07.2010 pren 1839 Determination of explosion limits of gases and vapours Kommentarfrist: 10.05.2010 pren 13071-3 Stationary waste containers up to 5 000 l, top lifted and bottom emptied - Part 3: Recommended lifting connections Kommentarfrist: 07.06.2010 pren 14143 Respiratory equipment - Self-contained re-breathing diving apparatus Kommentarfrist: 27.06.2010 pren 14211 Ambient air quality - Standard method for the measurement of the concentration of nitrogen dioxide and nitrogen monoxide by chemiluminescence Kommentarfrist: 27.06.2010 pren 14212 Ambient air quality - Standard method for the measurement of the concentration of sulphur dioxide by ultraviolet fluorescence Kommentarfrist: 27.06.2010 pren 14491 Beskyttende ventilasjonssystemer for støveksplosjoner Dust explosion venting protective systems Kommentarfrist: 19.04.2010 pren 14625 Ambient air quality - Standard method for the measurement of the concentration of ozone by ultraviolet photometry Kommentarfrist: 27.06.2010 pren 14626 Ambient air quality - Standard method for the measurement of the concentration of carbon monoxide by nondispersive infrared spectroscopy Kommentarfrist: 27.06.2010 pren 16020 Explosion diverters Kommentarfrist: 12.04.2010 pren 16023 Characterization of waste - Determination of calorific value Kommentarfrist: 12.04.2010 Listenummer: 06/2010 Side: 22 av 178
13 Miljøvern. Helsevern. Sikkerhet pren 16027 Vernetøy - Hansker for fotballmålvakter Protective clothing - Gloves with protective effect for association football goal keepers Kommentarfrist: 19.04.2010 pren 16034 Pedestrian doorsets, industrial, commercial, garage doors and windows - Product standard, performance characteristics - Fire resistance and/or smoke control characteristics Kommentarfrist: 17.05.2010 pren 16039 Water quality - Guidance standard on assessing the hydromorphological features of lakes Kommentarfrist: 07.06.2010 pren 16072 Intelligent transport systems - ESafety - Pan European ecall-operating requirements Kommentarfrist: 11.07.2010 pren 16081 Hyperbaric chambers - Specific requirements for fire extinguishing systems - Performance, installation and testing Kommentarfrist: 11.08.2010 pren 16082 Provision of aviation security services Kommentarfrist: 11.08.2010 pren ISO 4126-1 Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 1: Sikkerhetsventiler (ISO/DIS 4126-1:2009) Safety devices for protection against excessive pressure - Part 1: Safety valves (ISO/DIS 4126-1:2009) Kommentarfrist: 29.03.2010 pren ISO 4126-4 Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 4: Pilotopererte sikkerhetsventiler (ISO/DIS 4126-4:2009) Safety devices for protection against excessive pressure - Part 4: Pilot-operated safety valves (ISO/DIS 4126-4:2009) Kommentarfrist: 29.03.2010 pren ISO 4126-5 Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 5: Styrte trykkavlastningssystemer (CSPRS) (ISO/DIS 4126-5:2009) Safety devices for protection against excessive pressure - Part 5: Controlled safety pressure relief systems (CSPRS) (ISO/DIS 4126-5:2009) Kommentarfrist: 19.04.2010 pren ISO 4126-7 Sikkerhetsinnretninger for beskyttelse mot høyt trykk - Del 7: Felles data (ISO/DIS 4126-7:2009) Safety devices for protection against excessive pressure - Part 7: Common data (ISO/DIS 4126-7:2009) Kommentarfrist: 29.03.2010 Listenummer: 06/2010 Side: 23 av 178
13 Miljøvern. Helsevern. Sikkerhet pren ISO 9094 Small craft - Fire protection (ISO/DIS 9094:2010) Kommentarfrist: 07.06.2010 pren ISO 10882-1 Health and safety in welding and allied processes - Sampling of airborne particles and gases in the operator's breathing zone - Part 1: Sampling of airborne particles (ISO/DIS 10882-1:2009) Kommentarfrist: 10.05.2010 pren ISO 15011-5 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas (ISO/DIS 15011-5:2009) Kommentarfrist: 10.05.2010 pren ISO 26800 Ergonomics - General approach, principles and concepts (ISO/DIS 26800:2009) Kommentarfrist: 12.04.2010 pren ISO 28802 Ergonomics of the physical environment - Assessment by means of an environmental survey involving physical measurement of the environment and subjective responses of people (ISO/DIS 28802:2009) Kommentarfrist: 19.04.2010 pren ISO 28803 Ergonomics of the physical environment - Application of international standards to people with special requirements (ISO/DIS 28803:2010) Kommentarfrist: 21.06.2010 Standardforslag til høring - internasjonale (ISO) ISO 5658-2:2006/DAmd 1 Kommentarfrist: 01.05.2010 ISO 14021:1999/DAmd 1 Kommentarfrist: 05.04.2010 ISO/DIS 10882-1 Health and safety in welding and allied processes -- Sampling of airborne particles and gases in the operator's breathing zone -- Part 1: Sampling of airborne particles Kommentarfrist: 10.05.2010 ISO/DIS 11057 Air quality -- Test method for filtration characterisation of cleanable filter media Kommentarfrist: 07.05.2010 Listenummer: 06/2010 Side: 24 av 178
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 11206 Water quality -- Determination of dissolved bromate -- Method using ion chromatography (IC) and post column reaction (PCR) Kommentarfrist: 11.08.2010 ISO/DIS 11709 Soil quality -- Determination of selected coal-tar derived phenolic compounds using high performance liquid chromatography (HPLC) Kommentarfrist: 30.04.2010 ISO/DIS 12136 Reaction to fire tests -- Measurement of fundamental material properties using a fire propagation apparatus Kommentarfrist: 04.05.2010 ISO/DIS 12863 Standard test method for measuring the ignition propensity of cigarettes Kommentarfrist: 05.04.2010 ISO/DIS 12949 Standard prøvingsmetode for å måle hastigheten på varmeavgivelse fra begrenset brennbare madrasser eller madrassett. Standard test method for measuring the heat release rate of low flammability mattresses and mattress sets Kommentarfrist: 19.07.2010 ISO/DIS 14066 Greenhouse gases -- Competence requirements for greenhouse gas validation teams and verification teams Kommentarfrist: 31.05.2010 ISO/DIS 15011-5 Health and safety in welding and allied processes -- Laboratory method for sampling fume and gases -- Part 5: Identification of thermal-degradation products generated when welding or cutting through products composed wholly or partly of organic materials using pyrolysis-gas chromatography-mass spectrometry Kommentarfrist: 10.05.2010 ISO/DIS 17512-2 Soil quality -- Avoidance test for determining the quality of soils and effects of chemicals on behaviour -- Part 2: Test with collembolans (Folsomia candida) Kommentarfrist: 05.07.2010 ISO/DIS 22488 Ships and marine technology -- Shipboard fire-fighters' outfits (protective clothing, gloves, boots and helmet) Kommentarfrist: 05.04.2010 ISO/DIS 26800 Ergonomics -- General approach, principles and concepts Kommentarfrist: 12.04.2010 Listenummer: 06/2010 Side: 25 av 178
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 28961 Akustikk - Statistisk fordeling av normal høreterskel under fritt-felt-lytteforhold Acoustics -- Statistical distribution of normal hearing thresholds under free-field listening conditions Kommentarfrist: 17.07.2010 ISO/DIS 29042-8 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 8: Room method for measurement of the pollutant concentration parameter Kommentarfrist: 17.07.2010 ISO/DIS 29042-9 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 9: Decontamination index Kommentarfrist: 17.07.2010 ISO-standarder ISO 2889:2010 Sampling airborne radioactive materials from the stacks and ducts of nuclear facilities Erstatter A00008:20:007913 ISO 7240-24:2010 Fire detection and fire alarm systems -- Part 24: Sound-system loudspeakers ISO 9241-210:2010 Ergonomics of human-system interaction -- Part 210: Human-centred design for interactive systems Erstatter A00008:20:021197 ISO 11161:2007/Amd 1:2010 ISO 16312-1:2010 Guidance for assessing the validity of physical fire models for obtaining fire effluent toxicity data for fire hazard and risk assessment -- Part 1: Criteria Erstatter A00008:20:041093 ISO 16972:2010 Respiratory protective devices -- Terms, definitions, graphical symbols and units of measurement ISO 21072-3:2010 Ships and marine technology -- Marine environment protection: performance testing of oil skimmers -- Part 3: High viscosity oil ISO 29042-5:2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet ISO 29042-6:2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet Listenummer: 06/2010 Side: 26 av 178
13 Miljøvern. Helsevern. Sikkerhet ISO 29042-7:2010 Safety of machinery -- Evaluation of the emission of airborne hazardous substances -- Part 7: Test bench method for the measurement of the pollutant concentration parameter ISO/TR 7250-2:2010 Basic human body measurements for technological design -- Part 2: Statistical summaries of body measurements from individual ISO populations ISO/TS 22939:2010 Soil quality -- Measurement of enzyme activity patterns in soil samples using fluorogenic substrates in micro-well plates CEN Workshop Agreements CWA 16106:2010 PPE for Chemical, Biological, Radiological and Nuclear, (CBRN) Hazards CWA 16107:2010 Emergency Services Capability Framework Rapporter fra CEN (CR) CEN ISO/TR 15462:2009 Vannundersøkelse - Valg av bionedbrytningsprøvinger Water quality - Selection of tests for biodegradability (ISO/TR 15462:2006) CEN ISO/TS 15730:2008 Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers (ISO/TR 25398:2006) CEN ISO/TS 21268-1:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 1: Batch test using a liquid to solid ratio of 2 l/kg dry matter (ISO/TS 21268-1:2007) CEN ISO/TS 21268-2:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 2: Batch test using a liquid to solid ratio of 10 l/kg dry matter (ISO/TS 21268-2:2007) CEN ISO/TS 21268-3:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 3: Up-flow percolation test (ISO/TS 21268-3:2007) CEN ISO/TS 21268-4:2009 Soil quality - Leaching procedures for subsequent chemical and ecotoxicological testing of soil and soil materials - Part 4: Influence of ph on leaching with initial acid/base addition (ISO/TS 21268-4:2007) Listenummer: 06/2010 Side: 27 av 178
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 12101-4:2009 Brannventilasjonssystemer - Del 4: Installerte røykventilasjonsanlegg Smoke and heat control systems - Part 4: Installed SHEVS systems for smoke and heat ventilation CEN/TR 12566-5:2008 Små renseanlegg for inntil 50 PE - Del 5: Filtreringsanlegg for forbehandlet avløpsvann Small wastewater treatment systems up to 50 PT - Part 5: Pre-treated Effluent Filtration systems CEN/TR 13688:2008 Denne skal ikke ha norsk tittel Packaging - Material recycling - Report on requirements for substances and materials to prevent a sustained impediment to recycling CEN/TR 14181:2010 Utslipp fra stasjonære kilder - Veiledning for anvendelse av EN 14181:2004 Stationary source emissions - Guidance on the application of EN 14181:2004 CEN/TR 14383-5:2010 Kriminalitetforebygging - Byplanlegging og prosjektering av bygninger - Del 5: Bensinstasjoner Prevention of crime - Urban planning and building design - Part 5: Petrol stations CEN/TR 14383-7:2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR 14383-8:2009 Prevention of crime - Urban planning and building design - Part 8: Protection of buildings and sites against criminal attacks with vehicles CEN/TR 15276-1:2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 1: Krav og prøvingsmetoder for komponenter Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 1: Requirements and test methods for components CEN/TR 15276-2:2009 Faste brannslokkesystemer Slokkesystemer basert på fast stoff aerosol generatorer - Del 2: Konstruksjon, installasjon og vedlikehold Fixed firefighting systems - Condensed aerosol extinguishing systems - Part 2: Design, installation and maintenance CEN/TR 15809:2008 Characterization of sludges - Hygienic aspects - Treatments CEN/TR 15822:2009 Plast - Biologisk nedbrytbare plaster i eller på bakken - Gjennvinning, fjerning og relaterte miljøsaker Plastics - Biodegradable plastics in or on soil - Recovery, disposal and related environmental issues Listenummer: 06/2010 Side: 28 av 178