RF Power Capacitors Class 2.7, 20 & 30 mm Barrel Transmitting Types T H E C E R A M I C E X P E R T S
RF Power Capacitors Class 2.7, 20 & 30 mm Barrel Transmitting Types The CeramTec Group is a world leader in the design and manufacture of complex electronic ceramic components and assemblies used in a wide range of applications and cutting edge technologies. CeramTec UK specialises in the development and production of dielectric and ferroelectric materials and components. This range of high voltage RF discs capacitors is fabricated from very low loss CLASS ceramic dielectric materials which permit them to carry very high electrical loads over a wide frequency range. APPLICATIONS INCLUDE Radio Broadcast Transmitters Induction and Dielectric Heating Equipment HF Filter, By-Pass & Coupling Circuits High Power Matching Tuned Circuits Antenna Circuits Industrial Applications High Power matching networks Plasma Generators High quality medical imaging systems (MRI) FEATURES Low loss Class ceramic dielectric materials with noble metal electrodes resulting in low self heating. High Voltage / High Reactive Power Ratings Very low NPO capacitance-temperature characteristics available that result in correspondingly low tuned frequency drift. Low Inductance construction permitting higher frequency use. Low magnetic susceptibility Material Characteristics Dielectric Constant @ 20 C / MHz 5 36 77 90 60 90 Temperature Coefficient of Capacitance ppm/ C +00 ±60 Tan δ MHz (Cap 000 pf) x 0-4 5 5 5 5 5 5 Tan δ khz (Cap > 000 pf) x 0-4 0 0 0 0 0 0 Dielectric Strength kvmm - dc 22 20 5 0 0 0 Volume Resistivity Ωm 0 3 0 3 0 3 0 3 0 3 0 3 0 ±30 0 ±30-750 ±80-750 ±20-300 ±20 Electrical Specification Capacitance Range 2 2500pF (see table) Capacitance Tolerance See Tables. Consult factory for other tolerances Rated RF Voltage 7.5 5kV pk (see table) Test Voltage.5 x Rated Voltage / 30sec RF Voltage, Current & kvar Load v Frequency See RF rating curves (ref 30 C max ambient temperature) Operating Temperature Range -25 C +95 C Maximum Relative Humidity 75 %
RF POWER CAPACITORS CLASS Outline Drawing: 2.7 mm Diameter Wire Leaded Electrical Characteristics CLASS Ceramic Discs Type No Cap Value pf TCC ppm/ C Rated (ACpk + DC) kvpk Rated AC kvpk Test 50 Hz kvrms Max POWER Rating (kvar) Max Current Rating (A rms) 0 2 6.5 +00 4 3 4 4 2 6.6 5 0 4 3 4 4 2 2 5 50-750 4 3 4 4 2 806 50 00-300 4 3 4 4 2
RF Power Capacitors Class 2.7, 20 & 30 mm Barrel Transmitting Types Outline Drawing: 30 mm Barrel Range Thread 0/32 UNF Electrical Characteristics Type No Cap Value pf TCC ppm/ C Cap Tol Min Rated Voltage kvdc Max POWER Rating (kvar) Max Current Rating (A rms) A nom (mm) 6 5 00+/-60 +/-0.5 pf 5 50 5 3.9 4.5 6 7 00+/-60 +/-0.5 pf 5 50 5 3.9 4.5 6 9 00+/-60 +/-0.5 pf 5 50 5 3.9 40.5 6 0 0+/-30 +/-5 % 5 50 5 3.9 4.5 6 20 0+/-30 +/-5 % 5 50 5 3.9 40.5 6 25 0+/-30 +/-5 % 5 50 5 3.9 43.5 6 33 0+/-30 +/-5 % 5 50 5 3.9 4 6 40 0+/-30 +/-5 % 5 50 5 3.9 39.5 6 50 0+/-30 +/-5 % 5 50 5 3.9 42.5 6 60 0+/-30 +/-5 % 5 50 5 3.9 4.5 6 75 0+/-30 +/-5 % 0 50 5 3.9 4 62 75-750+/-80 +/-5 % 5 35 5 3.9 40.5 62 83-750+/-80 +/-5 % 5 35 5 3.9 40 62 00-750+/-80 +/-5 % 5 35 5 3.9 39 62 20-750+/-20 +/-5 % 5 35 5 3.9 42 62 50-750+/-20 +/-5 % 5 35 5 3.9 40 62 70-750+/-20 +/-5 % 5 25 5 3.9 39.5 62 200-750+/-20 +/-5 % 5 25 5 3.9 43 B nom (mm)
RF POWER CAPACITORS CLASS Type 6 25 pf 5kVpk Type 6 33 pf 5kVpk 00.0 00 00.0 00 50 kva I 5.0 Amps Ur 5 kvpk f 2.827 MHz f2 28.620 MHz 50 kva I 5.0 Amps Ur 5 kvpk f 2.4 MHz f2 2.682 MHz 0 0.0 0.0.00 0 00.00.0 0.0.00 0 00.00 Type 6 50 pf 5kVpk Type 6 75 pf 0kVpk 00.0 00 00.0 00 50 kva I 5.0 Amps Ur 5 kvpk f.43 MHz f2 4.30 MHz 50 kva I 5.0 Amps Ur 5 kvpk f 2.827 MHz f2 28.620 MHz 0 0.0 0.0.00 0 00.00.0 0.0.00 0 00.00 Type 62 75 pf 5kVpk Type 62 00 pf 5kVpk 00.0 00 00.0 00 35 kva I 5.0 Amps Ur 5 kvpk f 0.660 MHz f2 3.629 MHz 35 kva I 5.0 Amps Ur 5 kvpk f 0.495 MHz f2 0.22 MHz 0 0.0 0.0.00 0 00.00.0 0.0.00 0 00.00 Type 62 50 pf 5kVpk Type 62 200 pf 5kVpk 00.0 00 00.0 00 35 kva I 5.0 Amps Ur 5 kvpk f 0.330 MHz f2 6.84 MHz 25 kva I 5.0 Amps Ur 5 kvpk f 0.77 MHz f2 7.55 MHz 0 0.0 0.0.00 0 00.00.0 0.0.00 0 00.00 The above RF load conditions are based on the maximum body temperature rise of 45 C from an ambient temperature of 30 C.
RF Power Capacitors Class 2.7, 20 & 30 mm Barrel Transmitting Types Outline Drawing: 20 mm Barrel Range Electrical Characteristics Type No Cap Value pf TCC ppm/ C Cap Tol Min Rated Voltage kvdc Max POWER Rating (kvar) Max Current Rating (A rms) 65 5 00+/-60 +/-0.5 pf 7.5 25 0 20.83 22.6 65 0 00+/-60 +/-5 % 7.5 25 0 20.83 22.6 65 5 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 20 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 25 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 33 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 40 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 50 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 60 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 62 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 68 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 65 75 0+/-30 +/-5 % 7.5 25 0 20.83 22.6 66 40-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 50-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 55-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 60-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 65-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 75-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 82-750+ /-80 +/ 5 % 7.5 20 0 20.83 22.6 66 00-750+ /-80 +/-5 % 7.5 20 0 20.83 22.6 66 20-750+ /-20 +/ 5 % 7.5 5 0 20.83 22.6 66 50-750+ /-20 +/-5 % 7.5 5 0 20.83 22.6 66 70-750+ /-20 +/ 5 % 7.5 5 0 20.83 22.6 A max (mm) B max (mm)
RF POWER CAPACITORS CLASS Type 65 20 pf 7.5kVpk Type 66 40 pf 7.5kVpk 00 00 25 kva 20 kva I Amps I Amps f 7.067 MHz f 2.827 MHz.0 f2 3.800 MHz 0.0 f2 9.875 MHz 0 0. 0.0.00 0 00.00 0. 0.0.00 0 00.00 Type 65 33 pf 7.5kVpk Type 66 75 pf 7.5kVpk 00 00 25 kva 20 kva I Amps I Amps f 4.283 MHz f.508 MHz.0 f2 9.273 MHz 0.0 f2 0.600 MHz 0 0. 0.0.00 0 00.00 0. 0.0.00 0 00.00 Type 65 50 pf 7.5kVpk Type 66 00 pf 7.5kVpk 00 00 25 kva 20 kva I Amps I Amps f 2.827 MHz f.3 MHz.0 f2 2.720 MHz 0.0 f2 7.950 MHz 0 0. 0.0.00 0 00.00 0. 0.0.00 0 00.00 Type Type 6566 75pF pf 7.5kVpk Type 66 70 pf 7.5kVpk 0,0 00 00 25 20 kva I Amps Ur 7.5 kvpk 5 kva I Amps f.884.508 MHz f 0.499 MHz.0,0 f2 f2 0.600 8.480 MHz 0 0 I.0 f2 6.235 MHz 0 0. 0, 0.0.00 0 00.00 0,0,00 0,00 00,00 30 C Ambient 0. 0.0.00 0 00.00 The above RF load conditions are based on the maximum body temperature rise of 45 C from an ambient temperature of 30 C.
T H E C E R A M I C E X P E R T S CeramTec UK Limited Vauxhall Industrial Estate Ruabon exham LL4 6HY United Kingdom Phone +44 (0) 978 80 456 electroceramics@ceramtec.co.uk www.ceramtec.com The measured values mentioned before were determined for test samples and are applicable as standard values. The values were determined on the basis of DIN-/DIN-VDE standards and if these were not available, on the basis of CeramTec standards. The values indicated must not be transferred to arbitrary formats, components or parts featuring different surface qualities. They do not constitute a guarantee for certain properties. We expressly reserve the right to make technical changes. UK7003 EN 80 Star Cooperation (385) PDF only