Annonseringsdato: 2016-05-25 Listenummer: 11/2016 Standardiseringsprosjekter og nye standarder Listenummer: 11/2016 Side: 1 av 106
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 7010:2012/prA6 Graphical symbols - Safety colours and safety signs - Registered safety signs - Amendment 6 (ISO 7010:2011/Amd 6:2014) Kommentarfrist: 2016.06.10 pren 303-1 Kjeler for oppvarming - Del 1: Kjeler for oppvarming med mekaniske trekkbrennere - Terminologi, generelle krav, prøving og merking Heating boilers - Part 1: Heating boilers with forced draught burners - Terminology, general requirements, testing and marking Kommentarfrist: 2016.07.28 pren ISO 13943 Brannsikkerhet - Terminologi (ISO/DIS 13943:2016) Fire safety - Vocabulary (ISO/DIS 13943:2016) Kommentarfrist: 2016.07.21 pren ISO 18369-1 Oftalmisk optikk - Kontaktlinser - Del 1: Terminologi, klassifiseringssystem og anbefalinger for merking av spesifikasjoner (ISO/DIS 18369-1:2016) Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO/DIS 18369-1:2016) Kommentarfrist: 2016.07.14 Standardforslag til høring - internasjonale (ISO) ISO/DIS 2108 Information and documentation -- International Standard Book Number (ISBN) Kommentarfrist: 2016.07.03 ISO/DIS 3901 Information and documentation - International Standard Recording Code (ISRC) [Revision of first edition (ISO 3901:1986)] Information and documentation - International Standard Recording Code (ISRC) [Revision of first edition (ISO 3901:1986)] Kommentarfrist: 2016.06.29 ISO/DIS 3901 Information and documentation -- International Standard Recording Code (ISRC) Kommentarfrist: 2016.08.28 ISO/DIS 5459 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Datums and datum systems Kommentarfrist: 2016.06.16 ISO/DIS 6707-3 Buildings and civil engineering works - Vocabulary -- Part 3: Sustainability terms Kommentarfrist: 2016.08.28 Listenummer: 11/2016 Side: 2 av 106
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 13943 Fire safety - Vocabulary Kommentarfrist: 2016.07.20 ISO/DIS 13943 Fire safety -- Vocabulary Kommentarfrist: 2016.09.18 ISO/DIS 15708-3 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 3: Terminology Kommentarfrist: 2016.08.28 ISO/DIS 18369-1 Ophthalmic optics -- Contact lenses -- Part 1: Terminology Kommentarfrist: 2016.07.13 ISO/DIS 24617-8 Language resource management -- Semantic annotation framework (SemAF) -- Part 8: Semantic relations in discourse, core annotation schema (ISO DR-corel) Kommentarfrist: 2016.08.21 ISO/DIS 37102 Sustainable development and resilience of communities -- Vocabulary Kommentarfrist: 2016.08.23 ISO/DIS 80000-5 Mengder og enheter - Del 5: Termodynamikk Quantities and units -- Part 5: Thermodynamics Kommentarfrist: 2016.06.05 ISO/DIS 80000-7 Mengder og enheter - Del 7 : Lys Quantities and units -- Part 7: Light Kommentarfrist: 2016.06.22 ISO/DIS 80000-7 Mengder og enheter - Del 7: Lys og stråling Quantities and units -- Part 7: Light and radiation Kommentarfrist: 2016.08.21 ISO-standarder ISO 1219-1:2012/Amd 1:2016 Listenummer: 11/2016 Side: 3 av 106
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7404-1:2016 Methods for the petrographic analysis of bituminous coal and anthracite -- Part 1: Vocabulary Methods for the petrographic analysis of coals -- Part 1: Vocabulary Erstatter A00008:20:014126 ISO 8812:2016 Earth-moving machinery -- Backhoe loaders -- Terminology and commercial specifications Erstatter A00008:20:016261 ISO 9244:2008/Amd 1:2016 ISO 14880-1:2016 Optics and photonics -- Microlens arrays -- Part 1: Vocabulary and general properties Erstatter A00008:20:021141,A00008:20:038893,A00008:20:042724 ISO/TR 25901-1:2016 Welding and allied processes -- Vocabulary -- Part 1: General terms Erstatter A00008:20:043307 ISO/TR 25901-3:2016 Welding and allied processes -- Vocabulary -- Part 3: Welding processes Erstatter A00008:20:021099,A00008:20:043307 ISO/TR 25901-4:2016 Welding and allied processes -- Vocabulary -- Part 4: Arc welding Erstatter A00008:20:043307 ISO/TS 80004-12:2016 Nanotechnologies -- Vocabulary -- Part 12: Quantum phenomena in nanotechnology Rapporter fra CEN (CR) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) Listenummer: 11/2016 Side: 4 av 106
01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Fastsatte norske standarder NS-EN 572-1:2012+A1:2016 Bygningsglass - Basisprodukter av kalksodasilikatglass - Del 1: Definisjoner og generelle fysiske og mekaniske egenskaper Glass in building - Basic soda-lime silicate glass products - Part 1: Definitions and general physical and mechanical properties NS-EN 736-2:2016 Ventiler - Terminologi - Del 2: Definisjon av ventildeler Valves - Terminology - Part 2: Definition of components of valves NS-EN ISO 12100:2010/AC:2016 Rettelsesblad AC - Maskinsikkerhet - Hovedprinsipper for konstruksjon - Risikovurdering og risikoreduksjon (ISO 12100:2010) Corrigendum AC - Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) Språk: no NS-ISO 30302:2015 Informasjon og dokumentasjon - Ledelsessystemer for dokumentasjon - Retningslinjer for implementering Information and documentation - Management systems for records - Guidelines for implementation NS-ISO/IEC 27000:2016 Informasjonsteknologi - Sikringsteknikker - Ledelsessystemer for informasjonssikkerhet - Oversikt og terminologi Information technology - Security techniques - Information security management systems - Overview and vocabulary Tilbaketrukne norske standarder NS-EN 572-1:2012 Bygningsglass - Basisprodukter av kalksodasilikatglass - Del 1: Definisjoner og generelle fysiske og mekaniske egenskaper Glass in building - Basic soda lime silicate glass products - Part 1: Definitions and general physical and mechanical properties NS-EN 736-2:1997 Ventiler - Terminologi - Del 2: Definisjon av ventildeler Valves - Terminology - Part 2: Definition of components of valves Listenummer: 11/2016 Side: 5 av 106
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 1085:2007 Rensing av avløpsvann - Terminologi Wastewater treatment - Vocabulary NS-EN 1546-1:1999 Identitetskortsystemer - Intersektoriell elektronisk lommebok - Del 1: Definisjoner, begreper og strukturer Identification card systems - Inter-sector electronic purse - Part 1: Definitions, concepts and structures NS-ISO/IEC 27000:2014 Informasjonsteknologi - Sikringsteknikker - Styringssystemer for informasjonssikkerhet - Oversikt og terminologi Information technology - Security techniques - Information security management systems - Overview and vocabulary 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) EN ISO 12813:2015/prA1 Electronic fee collection - Compliance check communication for autonomous systems - Amendment 1 (ISO 12813:2015/DAmd 1:2016) Kommentarfrist: 2016.06.10 EN ISO 13141:2015/prA1 Electronic fee collection - Localisation augmentation communication for autonomous systems - Amendment 1 (ISO 13141:2015/DAmd 1:2016) Kommentarfrist: 2016.06.10 pren 16991 Risk based inspection framework (RBIF) Kommentarfrist: 2016.07.21 pren 16992 Competency for Customs Representatives Kommentarfrist: 2016.07.29 pren ISO 19160-4 Addressing - Part 4: International postal address components and template languages (ISO/DIS 19160-4:2016) Kommentarfrist: 2016.07.21 Standardforslag til høring - internasjonale (ISO) ISO 12813:2015/DAmd 1 Kommentarfrist: 2016.08.07 Listenummer: 11/2016 Side: 6 av 106
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO 13141:2015/DAmd 1 Kommentarfrist: 2016.08.07 ISO/DIS 15638-9 Intelligent transport systems -- Framework for cooperative Telematics Applications for Regulated commercial freight Vehicles (TARV) -- Part 9: Remote electronic tachograph monitoring (RTM) Kommentarfrist: 2016.06.16 ISO/DIS 18587.2 Translation services -- Post-editing of machine translation output -- Requirements Kommentarfrist: 2016.09.08 ISO/DIS 20275 Financial services -- Entity legal forms (ELF) Kommentarfrist: 2016.07.13 ISO/DIS 22316 Security and resilience -- Guidelines for organizational resilience Kommentarfrist: 2016.07.06 ISO/DIS 22319 Security and resilience -- Guidelines for planning the involvement of spontaneous volunteers Kommentarfrist: 2016.08.28 ISO-standarder ISO/TS 21219-1:2016 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 1: Introduction, numbering and versions (TPEG2-INV) ISO/TS 21219-9:2016 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 9: Service and network information (TPEG2-SNI) ISO/TS 21219-10:2016 Intelligent transport systems -- Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 10: Conditional access information (TPEG2-CAI) Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) Listenummer: 11/2016 Side: 7 av 106
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17427:2014 Intelligent transport systems - Cooperative systems - Roles and responsibilities in the context of cooperative ITS based on architecture(s) for cooperative systems (ISO/TS 17427:2014) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 15367-1:2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 16706:2014 Postal Services - Quality of Service - Measurement of incorrect delivery - Feasibility Report CEN/TR 16797-1:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR 16797-2:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding Listenummer: 11/2016 Side: 8 av 106
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management CEN/TS 16555-7:2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR Listenummer: 11/2016 Side: 9 av 106
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE CEN/TS 419261:2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN 9131:2016 Aerospace series - Quality Management Systems - Nonconformance Data Definition and Documentation NS-EN 13724:2013/AC:2016 Rettelsesblad AC - Åpninger på private postkasser og brevinnkast egnet for dører o.l. - Krav og prøvingsmetoder Corrigendum AC - Postal services - Apertures of private letter boxes and letter plates - Requirements and test methods NS-EN 14508:2016 Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail NS-EN ISO 17575-1:2016 Elektronisk avgiftsinnkreving - Definisjon av applikasjonsgrensesnitt for autonome systemer - Del 1: Innkreving (ISO 17575-1:2016) Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO 17575-1:2016) NS-EN ISO 17575-2:2016 Elektronisk avgiftsinnkreving - Definisjon av applikasjonsgrensesnitt for autonome systemer - Del 2: Kommunikasjon og forbindelse med lavere lag (ISO 17575-2:2016) Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO 17575-2:2016) NS-EN ISO 17575-3:2016 Elektronisk avgiftsinnkreving - Definisjon av applikasjonsgrensesnitt for autonome systemer - Del 3: Kontekstdata (ISO 17575-3:2015) Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO 17575-3:2016) Tilbaketrukne norske standarder NS-EN 9131:2009 Aerospace series - Quality management systems - Nonconformance documentation Listenummer: 11/2016 Side: 10 av 106
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport NS-EN 14508:2003+A1:2007 Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for ikke-prioriterte brev Postal services - Quality of service - Measurement of the transit time of end-to-end services for single piece non-priority mail and second class mail 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 13843 Water quality - Requirements for establishing performance characteristics of quantitative microbiological methods (ISO/DIS 13843:2016) Kommentarfrist: 2016.06.17 pren ISO 19343 Microbiology of the food chain - Detection and quantification of histamine in fish and fishery products - HPLC method (ISO/DIS 19343:2016) Kommentarfrist: 2016.06.23 pren ISO 29621 Cosmetics - Microbiology - Guidelines for the risk assessment and identification of microbiologically low-risk products (ISO/DIS 29621:2016) Kommentarfrist: 2016.06.17 Standardforslag til høring - internasjonale (ISO) ISO/DIS 13843 Water quality -- Requirements for establishing performance characteristics of quantitative microbiological methods Kommentarfrist: 2016.06.16 ISO/DIS 19343 Microbiology of the food chain -- Detection and quantification of histamine in fish and fishery products -- HPLC method Kommentarfrist: 2016.08.21 ISO/DIS 21872 Microbiology of the food chain -- Horizontal method for the detection of potentially enteropathogenic Vibrio parahaemolyticus, Vibrio cholerae and Vibrio vulnificus Kommentarfrist: 2016.08.07 ISO/DIS 29621 Cosmetics -- Microbiology -- Guidelines for the risk assessment and identification of microbiologically low-risk products Kommentarfrist: 2016.06.16 ISO-standarder ISO/TR 19716:2016 Nanotechnologies -- Characterization of cellulose nanocrystals Listenummer: 11/2016 Side: 11 av 106
07 Matematikk. Naturvitenskap ISO/TS 19337:2016 Nanotechnologies -- Characteristics of working suspensions of nano-objects for in vitro assays to evaluate inherent nano-object toxicity ISO/TS 80004-12:2016 Nanotechnologies -- Vocabulary -- Part 12: Quantum phenomena in nanotechnology Rapporter fra CEN (CR) CEN ISO/TR 6579-3:2014 Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 3: Guidelines for serotyping of Salmonella spp. (ISO/TR 6579-3:2014) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) Listenummer: 11/2016 Side: 12 av 106
07 Matematikk. Naturvitenskap CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TS 15634-3:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 15634-4:2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 15798:2013/prA1 Oftalmiske implantater - Oftalmisk viscosurgicalenheter (ISO 15798:2013/Damd 1:2016) Ophthalmic implants - Ophthalmic viscosurgical devices (ISO 15798:2013/Damd 1:2016) Kommentarfrist: 2016.06.10 pren ISO 8637-1 Ekstrakorporale systemer for rensing av blod - Del 1: Haemodialyser, haemodiafiltre, haemofiltre og haemoconcentratre (ISO/DIS 8637-1:2016) Extracorporeal systems for blood purification - Part 1: Haemodialysers, haemodiafilters, haemofilters and haemoconcentrators (ISO/DIS 8637-1:2016) Kommentarfrist: 2016.07.14 pren ISO 8637-2 Ekstrakorporale systemer for rensing av blod - Del 2: Ekstrakorporal blodkrets for haemodialyser, haemodiafiltre og haemofiltre (ISO/DIS 8637-2:2016) Extracorporeal systems for blood purification - Part 2: Extracorporeal blood circuit for haemodialysers, haemodiafilters and haemofilters (ISO/DIS 8637-2:2016) Kommentarfrist: 2016.07.14 pren ISO 8980-1 Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses (ISO/DIS 8980-1:2016) Kommentarfrist: 2016.06.17 Listenummer: 11/2016 Side: 13 av 106
11 Helsevesen, Teknikk pren ISO 8980-2 Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for power-variation lenses (ISO/DIS 8980-2:2016) Kommentarfrist: 2016.06.17 pren ISO 11979-8 Oftalmiske implantater - Intraokulære linser - Del 8: Grunnleggende krav (ISO/DIS 11979-8:2016) Ophthalmic implants - Intraocular lenses - Part 8: Fundamental requirements (ISO/DIS 11979-8:2016) Kommentarfrist: 2016.06.10 pren ISO 14457 Dentistry - Handpieces and motors (ISO/DIS 14457:2016) Kommentarfrist: 2016.07.14 pren ISO 15621 Absorbent incontinence aids for urine and/or faeces - General guidelines on evaluation (ISO/DIS 15621:2016) Kommentarfrist: 2016.07.14 pren ISO 15883-4 Vaskedesinfektorer - Del 4: Krav og prøvinger for vaskedesinfektorer med kjemisk desinfeksjon for termoendoskop (ISO/DIS 15883-4:2016) Washer-disinfectors - Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes (ISO/DIS 15883-4:2016) Kommentarfrist: 2016.07.29 pren ISO 17664 Behandling av helsetjenesteprodukter - Informasjon som gis av det medisinske utstyret fra produsenten for gjenvinning av medisinsk utstyr (ISO/DIS 17664:2016) Processing of health care products - Information to be provided by the medical device manufacturer for the processing of medical devices (ISO/DIS 17664:2016) Kommentarfrist: 2016.07.21 pren ISO 18369-1 Oftalmisk optikk - Kontaktlinser - Del 1: Terminologi, klassifiseringssystem og anbefalinger for merking av spesifikasjoner (ISO/DIS 18369-1:2016) Ophthalmic optics - Contact lenses - Part 1: Vocabulary, classification system and recommendations for labelling specifications (ISO/DIS 18369-1:2016) Kommentarfrist: 2016.07.14 pren ISO 18369-2 Oftalmisk optikk - Kontaktlinser - Del 2: Toleranser (ISO/DIS 18369-2:2016) Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO/DIS 18369-2:2016) Kommentarfrist: 2016.07.14 pren ISO 18369-3 Oftalmisk optikk - Kontaktlinser - Del 3: Målemetoder (ISO/DIS 18369-3:2016) Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO/DIS 18369-3:2016) Kommentarfrist: 2016.07.14 Listenummer: 11/2016 Side: 14 av 106
11 Helsevesen, Teknikk pren ISO 18369-4 Oftalmisk optikk - Kontaktlinser - Del 4: Fysiske og kjemiske egenskaper av kontaktlinsematerialer (ISO/DIS 18369-4:2016) Ophthalmic optics - Contact lenses - Part 4: Physicochemical properties of contact lens materials (ISO/DIS 18369-4:2016) Kommentarfrist: 2016.07.14 pren ISO 19369-3 Oftalmisk optikk - Kontaktlinser - Del 3: Målemetoder ISO/DIS 19369-3:2016) Ophthalmic optics - Contact lenses - Part 3: Measurement methods (ISO/DIS 19369-3:2016) Kommentarfrist: 2016.07.14 pren ISO 21987 Ophthalmic optics - Mounted spectacle lenses (ISO/DIS 21987:2016) Kommentarfrist: 2016.06.17 pren ISO 22112 Tannpleie - Kunstige tenner for tannproteser (ISO/DIS 22112:2016) Dentistry - Artificial teeth for dental prostheses (ISO/DIS 22112:2016) Kommentarfrist: 2016.06.30 pren ISO 28319 Tannpleie - Lasersveising (ISO/DIS 28319:2016) Dentistry - Laser welding (ISO/DIS 28319:2016) Kommentarfrist: 2016.07.29 Standardforslag til høring - internasjonale (ISO) ISO/DIS 1797.2 Dentistry -- Shanks for rotary and oscillating instruments Kommentarfrist: 2016.08.21 ISO/DIS 5832-7 Implants for surgery - Metallic materials - Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy Kommentarfrist: 2016.06.22 ISO/DIS 8536-6 Infusion equipment for medical use -- Part 6: Freeze drying closures for infusion bottles Kommentarfrist: 2016.06.29 ISO/DIS 8536-6 Infusion equipment for medical use -- Part 6: Freeze drying closures for infusion bottles Kommentarfrist: 2016.08.28 ISO/DIS 8980-1 Optics and optical instruments - Ophthalmic optics - Uncut finished spectacle lenses - Part 1: Specifications for single-vision and multifocal lenses Kommentarfrist: 2016.06.16 Listenummer: 11/2016 Side: 15 av 106
11 Helsevesen, Teknikk ISO/DIS 8980-2 Optics and optical instruments - Ophthalmic optics - Uncut finished spectacle lenses - Part 2: Specifications for progressive power lenses Kommentarfrist: 2016.06.16 ISO/DIS 10993-16 Biological evaluation of medical devices -- Part 16: Toxicokinetic study design for degradation products and leachables Kommentarfrist: 2016.07.10 ISO/DIS 11608-4 Needle-based injection systems for medical use - Requirements and test methods -- Part 4: Needle-based injection systems containing electronics Kommentarfrist: 2016.07.03 ISO/DIS 11608-6 Needle-based injection systems for medical use -- Requirements and test methods -- Part 6: On-body delivery systems Kommentarfrist: 2016.08.22 ISO/DIS 14457 Dentistry -- Handpieces and motors Kommentarfrist: 2016.07.13 ISO/DIS 15621 Urine-absorbing aids - General guidance for tests Kommentarfrist: 2016.07.13 ISO/DIS 15621 Absorbent incontinence aids for urine and/or faeces -- General guidelines on evaluation Kommentarfrist: 2016.09.11 ISO/DIS 15883-4 Vaskedesinfektorer - Del 4: Krav og prøvinger for vaskedesinfektorer med kjemisk desinfeksjon for termoendoskop Washer-disinfectors -- Part 4: Requirements and tests for washer-disinfectors employing chemical disinfection for thermolabile endoscopes Kommentarfrist: 2016.07.28 ISO/DIS 17664 Sterilisering av medisinsk utstyr - Informasjon som skal gis av produsenten om resterilisering av utstyr som kan gjenbrukes Sterilization of medical devices - Information to be provided by the manufacturer for the reprocessing of resterilizable devices Kommentarfrist: 2016.07.20 ISO/DIS 17664 Behandling av helsetjenesteprodukter - Informasjon som skal leveres av den medisinske produsenten for behandling av medisinsk utstyr Processing of health care products -- Information to be provided by the medical device manufacturer for the processing of medical devices Kommentarfrist: 2016.09.18 Listenummer: 11/2016 Side: 16 av 106
11 Helsevesen, Teknikk ISO/DIS 18369-1 Ophthalmic optics -- Contact lenses -- Part 1: Terminology Kommentarfrist: 2016.07.13 ISO/DIS 18369-2 Ophthalmic optics -- Contact lenses -- Part 2: Tolerances Kommentarfrist: 2016.07.13 ISO/DIS 18369-3 Ophthalmic optics -- Contact lenses -- Part 3: Measurement methods Kommentarfrist: 2016.07.13 ISO/DIS 18369-4 Ophthalmic optics -- Contact lenses -- Part 4: Physicochemical properties of contact lens materials Kommentarfrist: 2016.07.13 ISO/DIS 20749 Dentistry -- Pre-capsulated dental amalgam Kommentarfrist: 2016.08.21 ISO/DIS 21987 Ophthalmic optics -- Mounted spectacle lenses Kommentarfrist: 2016.06.16 ISO/DIS 22112 Dentistry - Artificial teeth for dental prostheses Kommentarfrist: 2016.06.29 ISO/DIS 22112 Dentistry -- Artificial teeth for dental prostheses Kommentarfrist: 2016.08.28 ISO/DIS 28319 Dentistry -- Laser welding Kommentarfrist: 2016.07.28 ISO-standarder ISO 7206-4:2010/Amd 1:2016 ISO 18668-1:2016 Traditional Chinese medicine -- Coding system for Chinese medicines -- Part 1: Coding rules for Chinese medicines ISO 19028:2016 Accessible design -- Information contents, figuration and display methods of tactile guide maps Listenummer: 11/2016 Side: 17 av 106
11 Helsevesen, Teknikk Rapporter fra CEN (CR) CEN ISO/TS 13004:2014 Sterilization of health care products - Radiation - Substantiation of selected sterilization dose: Method VDmaxSD (ISO/TS 13004:2013) CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the application of ISO 11607-1 and ISO 11607-2 (ISO/TS 16775:2014) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS 16677:2014 Øyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release CEN/TS 16826-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS 16826-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS 16827-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS 16827-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS 16827-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS 16835-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS 16835-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA Listenummer: 11/2016 Side: 18 av 106
11 Helsevesen, Teknikk CEN/TS 16835-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities Fastsatte norske standarder NS-EN 12791:2016 Kjemiske desinfeksjonsmidler og antiseptika - Kirurgiske hånddesinfeksjonsmidler - Prøvingsmetode og krav (fase 2, trinn 2) Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirements (phase 2, step 2) NS-EN ISO 15912:2016 Tannpleie - Støpeinvestment og varmebestandig modellmateriale (ISO 15912:2016) Dentistry - Refractory investment and die material (ISO 15912:2016) NS-EN ISO 18397:2016 Tannpleie - Elektrisk skaler (ISO 18397:2016) Dentistry - Powered scaler (ISO 18397:2016) NS-EN ISO 22674:2016 Tannpleie - Metallmaterialer for faste og avtakbare tannrestaureringer (ISO 22674:2016) Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2016) Tilbaketrukne norske standarder NS-EN 12791:2005 Kjemiske desinfeksjonsmidler og antiseptika - Kirurgiske hånddesinfeksjonsmidler - Prøvingsmetode og krav (fase 2/trinn 2) Chemical disinfectants and antiseptics - Surgical hand disinfection - Test method and requirement (phase 2/step 2) NS-EN ISO 15606:1999 Håndstykker til tannbehandling - Luftdrevne skalere og skalertips (ISO 15606:1999) Dental handpieces - Air-powered scalers and scaler tips (ISO 15606:1999) NS-EN ISO 15912:2006 Tannpleie - Støpeinvestment og varmebestandig modellmateriale (ISO 15912:2006) Dentistry - Casting investments and refractory die materials (ISO 15912:2006) NS-EN ISO 15912:2006/A1:2011 Endringsblad A1 - Tannpleie - Støpeinvestment og varmebestandig modellmateriale - Krav og prøvingsmetode for tilstrekkelig utvidelse av materialer av type 1 og type 2 (ISO 15912:2006/Amd 1:2011) Amendment A1 - Dentistry - Casting investments and refractory die materials - Requirement and test method for adequacy of expansion of Type 1 and Type 2 materials (ISO 15912:2006/Amd 1:2011) Listenummer: 11/2016 Side: 19 av 106
11 Helsevesen, Teknikk NS-EN ISO 22374:2005 Tannpleie - Håndstykker for tannpleie - Elektrisk drevne skalere og skalertips (ISO 22374:2005) Dentistry - Dental handpieces - Electrical-powered scalers and scaler tips (ISO 22374:2005) NS-EN ISO 22674:2006 Tannpleie - Metallmaterialer for faste og avtakbare tannrestaureringer (ISO 22674:2006) Dentistry - Metallic materials for fixed and removable restorations and appliances (ISO 22674:2006) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren 81-58 Safety rules for the construction and installation of lifts - Examination and tests - Part 58: Landing doors fire resistance test Kommentarfrist: 2016.06.17 pren 1364-6 Fire resistance tests for non-loadbearing elements - Part 6: Cavity Barriers Kommentarfrist: 2016.07.07 pren 13284-2 Stationary source emissions - Determination of low range mass concentration of dust - Part 2: Automated measuring systems Kommentarfrist: 2016.06.17 pren ISO 19085-9 Trebearbeidingsmaskiner - Sikkerhet - Del 9: Sirkelsagbenker (med og uten glidende bord) (ISO/DIS 19085-9:2016) Woodworking machines - Safety - Part 9: Circular saw benches (with and without sliding table) (ISO/DIS 19085-9:2016) Kommentarfrist: 2016.07.07 pren ISO 19258 Jordkvalitet - Retningslinjer for bestemmelse av bakgrunnsverdier (ISO/DIS 19258:2016) Soil quality - Guidance on the determination of background values (ISO/DIS 19258:2016) Kommentarfrist: 2016.07.07 pren ISO 28057 Dosimetry with solid thermoluminescence detectors for photon and electron radiations in radiotherapy (ISO 28057:2014) Kommentarfrist: 2016.07.07 pren ISO 7250-1 Basale kroppsmål for teknologisk design - Del 1: Definisjoner og målepunkter for kroppsmål (ISO/DIS 7250-1:2016) Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO/DIS 7250-1:2016) Kommentarfrist: 2016.07.21 Listenummer: 11/2016 Side: 20 av 106
13 Miljøvern. Helsevern. Sikkerhet pren ISO 9241-333 Ergonomics of human-system interaction - Part 333: Stereoscopic displays using glasses (ISO/DIS 9241-333:2016) Kommentarfrist: 2016.06.10 pren ISO 13943 Brannsikkerhet - Terminologi (ISO/DIS 13943:2016) Fire safety - Vocabulary (ISO/DIS 13943:2016) Kommentarfrist: 2016.07.21 pren ISO 14644-15 Cleanrooms and associated controlled environments - Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration (ISO/DIS 14644-15:2016) Kommentarfrist: 2016.06.30 pren ISO 20227 Water quality - Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza - Method using a stock culture independent microbiotest (ISO/DIS 20227:2016) Kommentarfrist: 2016.07.21 Standardforslag til høring - internasjonale (ISO) ISO/DIS 3008-2 Fire-resistance tests -- Part 2: Lift landing door assemblies Kommentarfrist: 2016.07.20 ISO/DIS 3008-2 Fire-resistance tests -- Part 2: Lift landing door assemblies Kommentarfrist: 2016.09.18 ISO/DIS 5667-12 Water quality -- Sampling -- Part 12: Guidance on sampling of bottom sediments Kommentarfrist: 2016.06.13 ISO/DIS 5667-16 Water quality -- Sampling -- Part 16: Guidance on biotesting of samples Kommentarfrist: 2016.06.19 ISO/DIS 9241-333 Ergonomics of human-system interaction -- Part 333: Stereoscopic displays using glasses Kommentarfrist: 2016.08.07 ISO/DIS 13315-4 Environmental management for concrete and concrete structures -- Part 4: Environmental design of concrete structures Kommentarfrist: 2016.07.06 Listenummer: 11/2016 Side: 21 av 106
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 13943 Fire safety - Vocabulary Kommentarfrist: 2016.07.20 ISO/DIS 13943 Fire safety -- Vocabulary Kommentarfrist: 2016.09.18 ISO/DIS 14052 Environmental management -- Material flow cost accounting -- Guidance for practical implementation in a supply chain Kommentarfrist: 2016.07.13 ISO/DIS 14239 Soil quality - Methods for measuring the mineralization of organic chemicals in soil under aerobic conditions using laboratory incubation systems Kommentarfrist: 2016.06.16 ISO/DIS 14239 Soil quality -- Laboratory incubation systems for measuring the mineralization of organic chemicals in soil under aerobic conditions Kommentarfrist: 2016.08.14 ISO/DIS 14644-15 Cleanrooms and associated controlled environments -- Part 15: Assessment of suitability for use of equipment and materials by airborne chemical concentration Kommentarfrist: 2016.08.28 ISO/DIS 19258 Soil quality -- Guidance on the determination of background values Kommentarfrist: 2016.07.06 ISO/DIS 19258 Soil quality -- Guidance on the determination of background values Kommentarfrist: 2016.09.04 ISO/DIS 20227 Water quality -- Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza -- Method using a stock culture independent microbiotest Kommentarfrist: 2016.07.20 ISO/DIS 24516-3 Guidelines for management of assets of water supply and wastewater systems -- Part 3: Wastewater collection networks Kommentarfrist: 2016.07.17 ISO/DIS 37102 Sustainable development and resilience of communities -- Vocabulary Kommentarfrist: 2016.08.23 Listenummer: 11/2016 Side: 22 av 106
13 Miljøvern. Helsevern. Sikkerhet ISO-standarder ISO 7240-24:2016 Fire detection and fire alarm systems -- Part 24: Fire alarm loudspeakers Erstatter A00008:20:051211,A00008:20:057919 ISO 15031-3:2016 Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits: specification and use Road vehicles -- Communication between vehicle and external equipment for emissions-related diagnostics -- Part 3: Diagnostic connector and related electrical circuits: Specification and use Erstatter A00008:20:029021 ISO 19028:2016 Accessible design -- Information contents, figuration and display methods of tactile guide maps ISO/TS 16973:2016 Respiratory protective devices -- Classification for respiratory protective device (RPD), excluding RPD for underwater application Rapporter fra CEN (CR) CEN ISO/TS 29843-1:2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010) CEN ISO/TR 9241-308:2015 Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter displays (SED) (ISO/TR 9241-308:2008) CEN ISO/TR 9241-309:2015 Ergonomics of human-system interaction - Part 309: Organic light-emitting diode (OLED) displays (ISO/TR 9241-309:2008) CEN ISO/TR 9241-310:2015 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and ergonomics of pixel defects (ISO/TR 9241-310:2010) CEN ISO/TS 9241-411:2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012) CEN ISO/TS 14067:2014 Greenhouse gases - Carbon footprint of products - Requirements and guidelines for quantification and communication (ISO/TS 14067:2013) CEN ISO/TS 14071:2016 Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014) Listenummer: 11/2016 Side: 23 av 106
13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) CEN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected version 2012-02-01) CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace CEN/TR 13205-3:2014 Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations - Part 3: Analysis of sampling efficiency data CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TR 16710-1:2015 Ergonomics methods Part 1: Feedback method - A method to understand how end users perform their work with machines Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines CEN/TR 16721:2014 Biobaserte produkter - Oversikt over metoder for å bestemme biobasert innhold Bio-based products - Overview of methods to determine the bio-based content CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes CEN/TR 16793:2016 Veiledning for valg, anvendelse og bruk av flammefeller Guide for the selection, application and use of flame arresters CEN/TR 16823:2015 Railway applications - Driver's cab - Background information on anthropometric data CEN/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) Listenummer: 11/2016 Side: 24 av 106
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 54-32:2015 Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs CEN/TS 13649:2014 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption CEN/TS 15864:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med kontinuerlig fornyelse av utlekkingsvæske under betingelser relevant for spesifiserte scenario(er) Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16637-1:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS 16637-2:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene CEN/TS 16660:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the monolithic status of waste Listenummer: 11/2016 Side: 25 av 106
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16692:2015 Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i totale vannprøver - Metode med fastfaseekstraksjon (SPE) med SPEplater og gasskromatografi med trippel kvadrupol-massespektrometri (GC-MS/MS) Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16822:2015 Textiles and textile products - Self-declared environmental claims - Use of the terms CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) CEN/TS 16868:2015 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method CEN/TS 16916:2016 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method Fastsatte norske standarder NS-EN 54-28:2016 Brannalarmanlegg - Del 28: Ikke-tilbakestillbare varmedetekterende kabler Fire detection and fire alarm system - Part 28: Non-resettable line-type heat detectors Listenummer: 11/2016 Side: 26 av 106
13 Miljøvern. Helsevern. Sikkerhet NS-EN 81-73:2016 Sikkerhetsregler for konstruksjon og installasjon av heiser - Spesielle løsninger for personheiser og vare- og personheiser - Del 73: Heisers virkemåte i tilfelle brann Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire NS-EN 1073-1:2016 Vernetøy mot faste luftbårne partikler, inkludert radioaktiv forurensning - Del 1: Krav og prøvingsmetoder for trykkluftventilert vernetøy som beskytter kroppen og luftveiene Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract NS-EN 1420:2016 Innflytelse av organiske materialer på drikkevann til mennesker - Bestemmelse av odør- og smaksvurdering av vann i rørsystemer Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems NS-EN 1628:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand under statisk belastning Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading Språk: no NS-EN 1628:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand under statisk belastning Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under static loading NS-EN 1629:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand under dynamisk belastning Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading Språk: no NS-EN 1629:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand under dynamisk belastning Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance under dynamic loading NS-EN 1630:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand mot manuelle innbruddsforsøk Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts Språk: no NS-EN 1630:2011+A1:2015 Dører, vinduer, påhengsvegger, gitter og skodder - Innbruddssikkerhet - Prøvingsmetode for bestemmelse av motstand mot manuelle innbruddsforsøk Pedestrian doorsets, windows, curtain walling, grilles and shutters - Burglar resistance - Test method for the determination of resistance to manual burglary attempts Listenummer: 11/2016 Side: 27 av 106