PrevaLED Core AC G2 Spot-, Ned- og veggfeste Lysmotorer og Moduler Bruksområder _ Spotlight i butikker _ Downlights og veggbelysning i kontorer, korridorer, møterom, arbeidsplasser _ Dekorativ og funksjonell belysning i hotell- og velværesektoren _ Effektbelysning Produktfordeler _ Kobles direkte til 220 240 V vekselspenning for klasse 1-armaturer _ Ingen ekstern driver nødvendig _ Enkel effektivitetsoppgradering fra 1. generasjonsmoduler takket være uendret form _ Muliggjør svært høy grad av frihet i armaturdesign _ Tillater svært kompakt armaturdesign _ Mindre kompleksitet i logistikk ettersom ingen eksterne drivere eller spesialkabler er nødvendig _ Øker sikkerheten takket være beskyttelsesglass og reversibel termisk utkobling _ Enkel å integrere takket være kompatibilitet med Zhaga bok 3 kjøling og reflektor _ Chip-On-Board-teknologi med god homogenitet, ingen diffusor kreves _ 5 års garanti Produktegenskaper _ LED light engine med integrert driver _ Lysgivende flate, diameter, posisjonering av monteringshull i henhold til Zhaga Bok 3 _ Tilkoblingsledning som skyves inn (ingen spesiell kontakt kreves) _ Tilgjengelig med lysfluks: 800 lm, 2000 lm PrevaLED Core AC G2 Side 1 av 7
_ System lysutbytte: opptil 94 lm/w _ Fargetemperatur: 2700 K, 3000 K eller 4000 K _ Fargegjengivelsesindeks Ra : typ. 83 _ Maksimal temperatur på huset: 80 C ved tc punkt _ Innledende fargekonsistens: < 3 SDCM _ Effektfaktor: > 0.95 PrevaLED Core AC G2 Side 2 av 7
Teknisk data Elektriske data minell effekt Konstruksj onseffekt (watt) minell spenning Spenningsomr åde Effektfaktor λ PL-CORE AC -800-827 8,90 W 8,90 W 230 V 220 240 V 0,99 AC PL-CORE AC -800-830 8,60 W 8,60 W 230 V 220 240 V 0,99 AC PL-CORE AC -2000-830 19,60 W 19,60 W 230 V 220 240 V 0,99 AC PL-CORE AC -2000-840 18,40 W 18,40 W 230 V 220 240 V 0,99 AC Strømtype Photometrical data Total useful luminous flux Lysutbytte Fargetemper atur Fargegjen givelsesin deks Ra Standardavvik av fargeavstemni ng m. useful luminous flux 120 PL-CORE AC -800-827 800 lm 90 lm/w 2700 K 83 3 sdcm 636 lm PL-CORE AC -800-830 800 lm 93 lm/w 3000 K 83 3 sdcm 636 lm PL-CORE AC -2000-830 2000 lm 102 lm/w 3000 K 83 3 sdcm 1770 lm PL-CORE AC -2000-840 2000 lm 109 lm/w 4000 K 83 3 sdcm 1770 lm PL-CORE AC -800-827 PL-CORE AC -800-830 PL-CORE AC -2000-830 PL-CORE AC -2000-840 Rated useful luminous flux 120 636 lm 636 lm 1770 lm 1770 lm Lystekniske data minal beam angle Rated beam angle (half peak value) Starttid Oppvarming stid (60 %) Diamete r of light emitting surface PL-CORE AC -800-827 110 110,00 0,3 s 0,30 s 14,0 PL-CORE AC -800-830 110 110,00 0,3 s 0,30 s 14,0 PL-CORE AC -2000-830 110 110,00 0,3 s 0,30 s 19,0 PL-CORE AC -2000-840 110 110,00 0,3 s 0,30 s 19,0 PrevaLED Core AC G2 Side 3 av 7
Mål og vekt Diameter Rated height Produktvekt PL-CORE AC -800-827,0 9,30 18,60 g PL-CORE AC -800-830,0 9,30 18,60 g PL-CORE AC -2000-830,0 9,30 18,60 g PL-CORE AC -2000-840,0 9,30 18,60 g Produktstrektegning med tall PL-CORE AC -800-827, PL-CORE AC -800-830 PL-CORE AC -2000-830, PL-CORE AC -2000-840 Temperatures & operating conditions Performance temp. acc. to IEC 62717 Maksimum temperatur v/ tc testpunkt Omgivelsestempera tur-område PL-CORE AC -800-827 65 C 80 C -20 + C PL-CORE AC -800-830 65 C 80 C -20 + C PL-CORE AC -2000-830 65 C 80 C -20 + C PL-CORE AC -2000-840 65 C 80 C -20 + C PrevaLED Core AC G2 Side 4 av 7
Levetid Lumen vedlikeholdsfa ktor ved endt leveti Levetid minell levetid på lampen Angitt levetid på lampen PL-CORE AC -800-827 0,70 000 h 000 h 000 h 000 PL-CORE AC -800-830 0,70 000 h 000 h 000 h 000 PL-CORE AC -2000-830 0,70 000 h 000 h 000 h 000 PL-CORE AC -2000-840 0,70 000 h 000 h 000 h 000 Antall tenn sykluser Ytterligere produktdata PL-CORE AC -800-827 PL-CORE AC -800-830 PL-CORE AC -2000-830 PL-CORE AC -2000-840 Maximum thermal load 7.5 W 7.2 W 15.8 W 14.5 W Egenskaper PL-CORE AC -800-827 PL-CORE AC -800-830 PL-CORE AC -2000-830 PL-CORE AC -2000-840 Dimbar Sertifikater og standarder Energy consumption Standarder PL-CORE AC -800-827 9 kwh/1000h Acc. to EN 62031/Acc. to EN 515/Acc. to EN 61000-3-2/Acc. to EN PL-CORE AC -800-830 9 kwh/1000h Acc. to EN 62031/Acc. to EN 515/Acc. to EN 61000-3-2/Acc. to EN PL-CORE AC -2000-830 20 kwh/1000h Acc. to EN 62031/Acc. to EN 515/Acc. to EN 61000-3-2/Acc. to EN PL-CORE AC -2000-840 19 kwh/1000h Acc. to EN 62031/Acc. to EN 515/Acc. to EN 61000-3-2/Acc. to EN PL-CORE AC -800-827 A+ PL-CORE AC -800-830 A+ PL-CORE AC -2000-830 A+ PL-CORE AC -2000-840 A+ Energy efficiency class PrevaLED Core AC G2 Side 5 av 7
Logistiske data Temperaturo mråde ved lagring PL-CORE AC -800-827 -20 85 C PL-CORE AC -800-830 -20 85 C PL-CORE AC -2000-830 -20 85 C PL-CORE AC -2000-840 -20 85 C System hjelp For mer detaljert program informasjon og grafikk se produktets dataark. Additional product information _ Installation by qualified electrician only. _ Please see the relevant application guides and instructions sheets for more detailed safety and mounting information. Additional information is available on request. _ For safety reasons the LED light engine must not be operated if the housing is damaged. _ The LED engine needs to be built into a luminaire. _ t released for diing operation. _ Suitable only for operation with line voltage. _ Conducting paths on the circuit board must not be damaged or destroyed during installation. _ Suitable for luminaires of protection class I, grounding is mandatory to comply with safety standards. _ When used in a luminaire of protection class II compliance with the required safety standards has to be ensured by the luminaire manufacturer. _ This LED module is not recoended to be used in rooms with fast moving parts as the light modulation can cause stroboscopic effects. _ This LED module might interfere with displays and cameras due to modulation. _ The LED module itself and all its components must not be stressed mechanically. _ For optimal cooling a thermal interface material should be applied between LED module and heat sink. _ It is highly recoended to use a thermal interface material (TIM). The TIM needs to enable adequate heat transfer, during installation it has to be taken care not to create air inclusions between surfaces. For this purpose it is recoended to use a heat sink with even and clean surfaces. _ The LED module should be mounted to a heat sink with M3 screws or suitable accessories. Maximum tightening torque for mounting screws need to be observed as excessive force may damage the housing. _ Protect against splashes! _ The module, as manufactured, has no inherent protection against corrosion. It is the user's responsibility to provide suitable protection against corrosive agents, such as moisture, condensation and other harmful elements. _ To avoid mechanical damage, the LED modules have to be attached securely to the intended mounting surface. It is recoended to avoid heavy vibration. _ Do not remove the cover or the safety glass from the LED module. Do not operate a LED module when the safety glass is broken, missing or cracked. Salg og teknisk støtte Salg og teknisk støtte www.osram.com PrevaLED Core AC G2 Side 6 av 7
Last ned data Fil Declarations of conformity 722129_Declaration of Conformity PL CORE AC G2 Logistikk data Product kode Forpaknings enhet (stk/enhet) Dimensjoner (lengde x bredde x høyde) Volum Brutto vekt 4052899952751 PL-CORE AC -800-827 NO: VS 4052899952768 PL-CORE AC -800-830 NO: VS 4052899952775 PL-CORE AC -2000-830 NO: VS 4052899952782 PL-CORE AC -2000-840 NO: VS The mentioned product code describes the smallest quantity unit which can be ordered. One shipping unit can contain one or more single products. When placing an order, for the quantity please enter single or multiples of a shipping unit. Referanser / Lenker For more information on the multi-level guarantee and the terms and conditions of the guarantee visit www.osram.com/system-guarantee Ansvarsfraskrivelse Endres uten varsel. Sørg alltid for å bruke den nyeste versjonen. PrevaLED Core AC G2 Side 7 av 7