Annonseringsdato: 2011-02-04 Listenummer: 18/2010 Standardiseringsprosjekter og nye standarder Listenummer: 18/2010 Side: 1 av 147
00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - internasjonale (ISO) ISO/DIS 12176-1 Rør og rørdeler av plast - Utstyr for sveising av polyetylen systemer - Del 1: Buttsveising Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 1: Butt fusion Kommentarfrist: 26.03.2011 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN 934-2:2009/prA1 Tilsetningsstoffer for betong, mørtel og injiseringsmasse - Del 2: Tilsetningsstoffer for betong - Definisjoner, krav, samsvar, merking og etikettering Admixtures for concrete, mortar and grout - Part 2: Concrete admixtures - Definitions, requirements, conformity, marking and labelling Kommentarfrist: 28.03.2011 pren 480-8 Tilsetningsstoffer for betong, mørtel og injiseringsmasse - Prøvingsmetoder - Del 8: Bestemmelse av tørrstoffinnhold Admixtures for concrete, mortar and grout - Test methods - Part 8: Determination of the conventional dry material content Kommentarfrist: 28.03.2011 pren 13940-2 Health informatics - System of concepts to support continuity of care - Part 2: Health care process and workflow Kommentarfrist: 07.03.2011 pren 16214-1 Sustainably produced biomass for energy applications - Principles, criteria, indicators and verifiers for biofuels and bioliquids - Part 1: Terminology Kommentarfrist: 25.04.2011 pren ISO 6433 Technical product documentation - Part references (ISO/DIS 6433:2010) Kommentarfrist: 07.03.2011 pren ISO 6927 Buildings and civil engineering works - Sealants - Vocabulary (ISO/DIS 6927:2011) Kommentarfrist: 06.06.2011 pren ISO 8373 Styring av industriroboter - Terminologi Manipulating industrial robots - Vocabulary (ISO/DIS 8373:2010) Kommentarfrist: 02.05.2011 Listenummer: 18/2010 Side: 2 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - internasjonale (ISO) ISO 4306-3:2003/DAmd 1 Kommentarfrist: 13.05.2011 ISO 6107-2:2006/DAmd 1 Kommentarfrist: 06.06.2011 ISO 7010/DAmd 85 Safety sign E014: Child seat presence and orientation detection system (CPOD) Kommentarfrist: 25.04.2011 ISO 7010/DAmd 86 Safety sign E015: Drinking water Kommentarfrist: 25.04.2011 ISO 7010/DAmd 87 Safety sign E020: Emergency stop button Kommentarfrist: 25.04.2011 ISO 7010/DAmd 88 Safety sign E021: Hand washing facility Kommentarfrist: 25.04.2011 ISO 7010/DAmd 89 Safety sign E022: Push door on left-hand side to open Kommentarfrist: 25.04.2011 ISO 7010/DAmd 90 Safety sign E023: Push door on right-hand side to open Kommentarfrist: 25.04.2011 ISO 7010/DAmd 91 Safety sign M027: Check guard Kommentarfrist: 25.04.2011 ISO 7010/DAmd 92 Safety sign M028: Keep locked Kommentarfrist: 25.04.2011 ISO 7010/DAmd 93 Safety sign M029: Sound horn Kommentarfrist: 25.04.2011 ISO 7010/DAmd 94 Safety sign M030: Use litter bin Kommentarfrist: 25.04.2011 Listenummer: 18/2010 Side: 3 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010/DAmd 95 Safety sign M031: Use table saw adjustable guard Kommentarfrist: 25.04.2011 ISO 7010/DAmd 96 Safety sign M032: Wear anti-static footwear Kommentarfrist: 25.04.2011 ISO 7010/DAmd 97 Safety sign P016: Do not spray with water Kommentarfrist: 25.04.2011 ISO 7010/DAmd 98 Safety sign P035: Do not wear metal studded footwear Kommentarfrist: 25.04.2011 ISO 7010/DAmd 99 Safety sign P036: No children allowed Kommentarfrist: 25.04.2011 ISO 7010/DAmd 100 Safety sign W030: Warning; Hand crushing between press brake tool Kommentarfrist: 25.04.2011 ISO 7010/DAmd 101 Safety sign W031: Warning; Hand crushing between press brake and material Kommentarfrist: 25.04.2011 ISO 7010/DAmd 102 Safety sign W032: Warning; Rapid movement of workpiece in press brake Kommentarfrist: 25.04.2011 ISO 7010/DAmd 103 Safety sign W033: Warning; Barbed wire Kommentarfrist: 25.04.2011 ISO 7010/DAmd 104 Safety sign W034: Warning; Bull Kommentarfrist: 25.04.2011 ISO 7010/DAmd 105 Safety sign W035: Warning; Falling objects Kommentarfrist: 25.04.2011 ISO 7010/DAmd 106 Safety sign W036: Warning; Fragile roof Kommentarfrist: 25.04.2011 Listenummer: 18/2010 Side: 4 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010/DAmd 108 Safety sign W038: Warning; Sudden loud noise Kommentarfrist: 25.04.2011 ISO/DIS 128-15 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of shipbuilding drawings Kommentarfrist: 22.02.2011 ISO/DIS 129-4 Technical product documentation (TPD) -- Indication of dimensions and tolerances -- Part 4: Dimensioning for shipbuilding drawings Kommentarfrist: 22.02.2011 ISO/DIS 3864-3 Grafiske symboler - Sikkerhetsfarger og sikkerhetsskilt - Del 3: Utformingskriterier for grafiske symboler brukt på sikkerhetsskilt Graphical symbols -- Safety colours and safety signs -- Part 3: Design criteria for graphical symbols used in safety signs Kommentarfrist: 04.06.2011 ISO/DIS 3864-3 Graphical symbols -- Safety colours and safety signs -- Part 3: Design principles for graphical symbols for use in safety signs Kommentarfrist: 04.06.2011 ISO/DIS 6433 Technical product documentation -- Part references Kommentarfrist: 07.03.2011 ISO/DIS 6927 Buildings and civil engineering works -- Sealants -- Vocabulary Kommentarfrist: 06.06.2011 ISO/DIS 6938 Textiles -- Natural fibres -- Generic names and definitions Kommentarfrist: 19.06.2011 ISO/DIS 8373 Manipulating industrial robots - Vocabulary (Revision of ISO/TR 8373:1988) Kommentarfrist: 02.05.2011 ISO/DIS 8373 Manipulating industrial robots -- Vocabulary Kommentarfrist: 01.05.2011 ISO/DIS 13006 Ceramic tile - Definitions, classification, characteristics and marking Kommentarfrist: 07.05.2011 Listenummer: 18/2010 Side: 5 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 13006 Ceramic tiles -- Definitions, classification, characteristics and marking Kommentarfrist: 07.05.2011 ISO/DIS 13008 Information and documentation -- Digital records conversion and migration process Kommentarfrist: 06.05.2011 ISO/DIS 13372 Tilstandsovervåking og diagnostikk av maskiner - Ordliste Condition monitoring and diagnostics of machines -- Vocabulary Kommentarfrist: 08.05.2011 ISO/DIS 13372 Condition monitoring and diagnostics of machines -- Vocabulary Kommentarfrist: 07.05.2011 ISO/DIS 13444 Technical product documentation (TPD) -- Dimensioning and indication of knurling Kommentarfrist: 13.03.2011 ISO/DIS 22300 Societal security -- Vocabulary Kommentarfrist: 14.05.2011 ISO-standarder ISO 7010:2003/Amd 7:2010 ISO 12756:1998/Amd 1:2011 Viscosity of the writing fluid ISO 22742:2010 Packaging -- Linear bar code and two-dimensional symbols for product packaging Erstatter A00008:20:035115 ISO/TR 12802:2010 Nanotechnologies -- Model taxonomic framework for use in developing vocabularies -- Core concepts Rapporter fra CEN (CR) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TR 15932:2010 Plastics - Recommendation for terminology and characterisation of biopolymers and bioplastics Listenummer: 18/2010 Side: 6 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN/TR 16015:2010 Beslag for møbler - Termer for låsemekanismer Hardware for furniture - Terms for locking mechanisms CEN/TS 15989:2010 Kjøretøy og annet utstyr for brannbekjempelse - Symboler til bruk på kontrollpaneler og lignende Firefighting vehicles and equipment - Symbols for operator controls and other displays Fastsatte norske standarder NS-EN 13103:2009+A1:2010 Jernbane - Hjulsett og boggier - Rullende aksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Non-powered axles - Design method NS-EN 13104:2009+A1:2010 Jernbane - Hjulsett og boggier - Drivaksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Powered axles - Design method NS-EN 13965-2:2010 Karakterisering av avfall - Terminologi - Del 2: Ledelsesrelaterte termer og definisjoner Characterization of waste - Terminology - Part 2: Management related terms and definitions NS-EN 14588:2010 Fast biobrensel - Terminologi, definisjoner og beskrivelser Solid biofuels - Terminology, definitions and descriptions NS-EN 15947-1:2010 Pyrotekniske artikler - Fyrverkeri, kategori 1, 2 og 3 - Del 1: Terminologi Pyrotechnic articles - Fireworks, Categories 1, 2 and 3 - Part 1: Terminology NS-EN ISO 1942:2010 Tannpleie - Terminologi (ISO 1942:2009, korrigert utgave 2010-03-01) Dentistry - Vocabulary (ISO 1942:2009, Corrected version 2010-03-01) NS-EN ISO 12100:2010 Maskinsikkerhet - Hovedprinsipper for konstruksjon - Risikovurdering og risikoreduksjon (ISO 12100:2010) Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) Tilbaketrukne norske standarder NS 11010:2008 Tilgjengelige reiselivsmål - Krav som grunnlag for merkeordning Accessible tourist destinations - Requirements as basis for a labelling system Språk: no Listenummer: 18/2010 Side: 7 av 147
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 13103:2009 Jernbane - Hjulsett og boggier - Rullende aksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Non-powered axles - Design guide NS-EN 13104:2009 Jernbane - Hjulsett og boggier - Drivaksler - Retningslinjer for konstruksjon Railway applications - Wheelsets and bogies - Powered axles - Design method NS-EN 13965-2:2004 Karakterisering av avfall - Terminologi - Del 2: Ledelsesrelaterte termer og definisjoner Characterization of waste - Terminology - Part 2: Management related terms and definitions NS-EN 14035-1:2003 Fyrverkeri - Del 1: Terminologi - (innbefattet rettelsesblad AC:2005) Fireworks - Part 1: Terminology - (Corrigendum AC:2005 incorporated) NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) /fr NS-EN ISO 12100-1:2003 Maskinsikkerhet - Grunnleggende begreper, hovedprinsipper for konstruksjon - Del 1: Grunnleggende terminologi, metodikk (ISO 12100-1:2003) Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003) Språk: no/en NS-EN ISO 12100-2:2003 Maskinsikkerhet - Grunnleggende begreper, hovedprinsipper for konstruksjon - Del 2: Tekniske prinsipper (ISO 12100-2:2003) Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003) NS-EN ISO 12100-1:2003/A1:2009 Endringsblad A1 - Maskinsikkerhet - Grunnleggende begreper, hovedprinsipper for konstruksjon - Del 1: Grunnleggende terminologi, metodikk (ISO 12100-1:2003/Amd 1:2009) Amendment A1 - Safety of machinery - Basic concepts, general principles for design - Part 1: Basic terminology, methodology (ISO 12100-1:2003/Amd 1:2009) NS-EN ISO 12100-2:2003/A1:2009 Endringsblad A1 - Maskinsikkerhet - Grunnleggende begreper, hovedprinsipper for konstruksjon - Del 2: Tekniske prinsipper (ISO 12100-2:2003/Amd 1:2009) Amendment A1 - Safety of machinery - Basic concepts, general principles for design - Part 2: Technical principles (ISO 12100-2:2003/Amd 1:2009) Listenummer: 18/2010 Side: 8 av 147
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 13850 Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail Kommentarfrist: 16.05.2011 pren 16194 Mobile non-sewer-connected toilet cabins - Requirements of services and products relating to the deployment of cabins and sanitary products Kommentarfrist: 21.03.2011 pren 16224 Health care provision by chiropractors Kommentarfrist: 09.05.2011 pren 16231 Metodikk for benchmarking av energieffektivitet Energy efficiency benchmarking methodology Kommentarfrist: 06.06.2011 pren ISO 15189 Medisinske laboratorier - Krav til kvalitet og kompetanse (ISO/DIS 15189:2011) Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2011) Kommentarfrist: 30.05.2011 pren ISO/IEC 17020 Samsvarsvurdering - Generelle krav til drift av ulike typer organer som utfører inspeksjoner (ISO/IEC/DIS 17020:2011) Conformity assessment - General criteria for the operation of various types of bodies performing inspection (ISO/IEC/DIS 17020:2011) Kommentarfrist: 06.06.2011 Standardforslag til høring - internasjonale (ISO) ISO/DIS 8586 Sensorisk analyse -- Generell veiledning for valg, trening og overvåking av utvalgte og ekspert dommere Sensory analysis -- General guidance for the selection, training and monitoring of selected and expert assessors Kommentarfrist: 14.02.2011 ISO/DIS 10711 Intelligent Transport Systems -- Interface Protocol and Message Set Definition between Traffic Signal Controllers and Detectors(IPMSTSCD) Kommentarfrist: 03.04.2011 ISO/DIS 15189 Medical laboratories -- Requirements for quality and competence Kommentarfrist: 30.05.2011 Listenummer: 18/2010 Side: 9 av 147
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 18436-1 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 1: Requirements for assessment bodies and the assessment process Kommentarfrist: 29.05.2011 ISO/DIS 18436-2 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 2: Vibration condition monitoring Kommentarfrist: 06.06.2011 ISO/DIS 18436-1 Tilstandsovervåking og diagnostikk av maskiner - Akkreditering av organisasjoner samt trening og sertifisering av personale - Del 1: Generelle krav til trening og sertifisering Condition monitoring and diagnostics of machines -- Accreditation of organizations and training and certification of personnel -- Part 1: General requirements for training and certification Kommentarfrist: 29.05.2011 ISO/DIS 18436-2 Tilstandsovervåking og diagnostikk av maskiner - Akkreditering av organisasjoner samt trening og sertifisering av personale - Del 2: Vibrasjonsanalyse Condition monitoring and diagnostics of machines -- Accreditation of organizations and training and certification of personnel -- Part 2: Vibration analysis Kommentarfrist: 06.06.2011 ISO/DIS 22300 Societal security -- Vocabulary Kommentarfrist: 14.05.2011 ISO/DIS 22301 Societal security -- Preparedness and continuity management systems -- Requirements Kommentarfrist: 19.04.2011 ISO/DIS 24534-5 Automatic vehicle and equipment identification -- Electronic Registration Identification (ERI) for vehicles -- Part 5: Secure communications using symmetrical techniques Kommentarfrist: 19.03.2011 ISO-standarder ISO 17573:2010 Electronic fee collection -- Systems architecture for vehicle-related tolling Erstatter A00008:20:030757 ISO 21216:2011 Intelligent transport systems -- Wireless communications -- CALM using millimetre communications -- Air interface ISO 29283:2011 ITS CALM Mobile Wireless Broadband applications using Communications in accordance with IEEE 802.20 Listenummer: 18/2010 Side: 10 av 147
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis ISO/TS 10674:2011 Rating services -- Assessment of creditworthiness of non-listed entities Rapporter fra CEN (CR) CEN ISO/TS 12813:2009 Elektronisk avgiftsinnkreving (EFC) - Kontroll av samsvar for kommunikasjon i autonome EFC systemer (ISO/TS 12813:2009) Electronic fee collection - Compliance check communication for autonomous systems (ISO/TS 12813:2009) CEN ISO/TS 13141:2010 Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/DTS 13141:2009) Electronic fee collection - Localisation augmentation communication for autonomous systems (ISO/TS 13141:2010) CEN ISO/TS 17574:2009 Veitransporttelematikk - Elektronisk avgiftsinnkreving (EFC) - Retningslinjer for EFC sikkerhetsprofiler Electronic fee collection - Guidelines for security protection profiles (ISO/TS 17574:2009) CEN ISO/TS 17575-1:2010 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/TS 17575-1:2010) Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging (ISO/TS 17575-1:2010) CEN ISO/TS 17575-2:2010 Electronic fee collection - Application interface definition for autonomous systems - Part 2: Communication and connection to the lower layers (ISO/TS 17575-2:2010) CEN ISO/TS 18234-2:2006 Traffic and Traveller Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 2: Syntax, Semantics and Framing Structure (SSF) (ISO/TS 18234-2:2006) CEN ISO/TS 18234-5:2006 Traffic and Travel Information (TTI) - TTI via Transport Protocol Expert Group (TPEG) data-streams - Part 5: Public Transport Information (PTI) application (ISO/TS 18234-5:2006) CEN/TR 14383-7:2009 Forebygging av kriminalitet - Byplanlegging og prosjektering av bygninger - Del 7: Planlegging og retningslinjer for offentlig transport midler Prevention of crime - Urban planning and building design - Part 7: Design and management of public transport facilities CEN/TR 15367-3:2009 Petroleum products - Guide for good housekeeping - Part 3: Prevention of cross contamination CEN/TR 16040:2010 Electronic fee collection - Requirements for urban dedicated short-range communication Electronic fee collection - Requirements for urban dedicated short-range communication Listenummer: 18/2010 Side: 11 av 147
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 15121-1:2011 Postal Services - Hybrid Mail - Part 1: Secured electronic postal services (SePS) interface specification - Concepts, schemas and operations CEN/TS 15121-2:2011 Postal Services - Hybrid Mail - Part 2: Secured electronic postal services (SePS) interface specification - ECPM Service CEN/TS 15722:2009 Veitransporttelematikk - ESikkerhet - Mangler Road transport and traffic telematics - ESafety - ECall minimum set of data (MSD) CEN/TS 15844-1:2010 Postal services - ID-tagging of letter mail items - Part 1: ID-tag structure, message and binary CEN/TS 15844-2:2010 Postal services - ID-tagging of letter mail items - Part 2: BNB-78 Encoding Specification CEN/TS 15844-3:2010 Postal services - ID-tagging of letter mail items - Part 3: BNB-62 encoding specification CEN/TS 15844-4:2010 Postal services - ID-tagging of letter mail items - Part 4: State encoding specification for flats CEN/TS 15844-5:2010 Postal services - ID-tagging of letter mail items - Part 5: 4-state encoding specification for small letters CEN/TS 15873:2009 Postal Services - Open Standard Interface - Address Data File Format for OCR/VCS Dictionary Generation Fastsatte norske standarder NS-EN 14482:2010 Posttjenester - Kassetter for internasjonal brevpost - Prøvingsmetoder og krav til yteevne Postal services - Trays for international letter mail - Test methods and performance requirements Oversettelser av tidligere fastsatte norske standarder NS-ISO 26000:2010 Veiledning om samfunnsansvar Guidance on social responsibility Språk: no Listenummer: 18/2010 Side: 12 av 147
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Tilbaketrukne norske standarder NS 11010:2008 Tilgjengelige reiselivsmål - Krav som grunnlag for merkeordning Accessible tourist destinations - Requirements as basis for a labelling system Språk: no 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 6887-6 Fôr- og næringsmiddelmikrobiologi Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse Del 6: Spesielle regler for forbehandling av prøver tatt ut ved primært produksjonstrinn (ISO/DIS 6887-6:2010) Microbiology of food and animal feeding stuffs - Preparation of test samples, initial suspension and decimal dilutions for microbiological examination - Part 6: Specific rules for the preparation of samples taken at the primary production stage (ISO/DIS 6887-6:2010) Kommentarfrist: 09.05.2011 pren ISO 13307 Fôr- og næringsmiddelmikrobiologi Primært produksjonstrinn Prøvetakingsteknikker (ISO/DIS 13307:2010) Microbiology of food and animal feeding stuffs - Primary production stage - Sampling techniques (ISO/DIS 13307:2010) Kommentarfrist: 09.05.2011 Standardforslag til høring - internasjonale (ISO) ISO/DIS 6887-6 Fôr- og næringsmiddelmikrobiologi -- Forbehandling og fortynning av prøver for mikrobiologisk undersøkelse -- Del 6: Spesielle regler for forbehandling av prøver tatt ut ved primært produksjonstrinn Microbiology of food and animal feeding stuffs -- Preparation of test samples, initial suspension and decimal dilutions for microbiological examination -- Part 6: Specific rules for the preparation of samples taken at the primary production stage Kommentarfrist: 08.05.2011 ISO/DIS 9308-2 Water quality -- Enumeration of Escherichia coli and coliform bacteria -- Part 2: Most probable number method Kommentarfrist: 10.04.2011 ISO/DIS 12025 Nanomaterials -- Quantification of nano-object release from powders by generation of aerosols Kommentarfrist: 22.02.2011 ISO/DIS 13307 Fôr- og næringsmiddelmikrobiologi -- Primært produksjonstrinn -- Prøvetakingsteknikker Microbiology of food and animal feeding stuffs -- Primary production stage -- Sampling techniques Kommentarfrist: 08.05.2011 ISO/DIS 21572 Næringsmidler -- Deteksjon av genetisk modifiserte organismer og avledete produkter -- Proteinbaserte metoder Foodstuffs -- Detection of genetically modified organisms and derived products -- Protein-based methods Kommentarfrist: 09.05.2011 Listenummer: 18/2010 Side: 13 av 147
07 Matematikk. Naturvitenskap ISO-standarder ISO 10801:2010 Nanotechnologies -- Generation of metal nanoparticles for inhalation toxicity testing using the evaporation/condensation method ISO 10808:2010 Nanotechnologies -- Characterization of nanoparticles in inhalation exposure chambers for inhalation toxicity testing ISO/TR 12802:2010 Nanotechnologies -- Model taxonomic framework for use in developing vocabularies -- Core concepts ISO/TS 11133-2:2003/Amd 1:2011 Test microorganisms for commonly used culture media Rapporter fra CEN (CR) CEN ISO/TS 22117:2010 Fôr- og næringsmiddelmikrobiologi - Spesifikke krav og retningslinjer for kvalifikasjonsprøving ved interlaboratorie sammenlikning (ISO/TS 22117:2010) Microbiology of food and animal feeding stuffs - Specific requirements and guidance for proficiency testing by interlaboratory comparison (ISO/TS 22117:2010) CEN ISO/TS 10272-3:2010 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for bestemmelse og telling av Campylobacter ssp. - Del 3: Semi-kvantitativ bestemmelse (ISO/TS 10272-3:2010) Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method (ISO/TS 10272-3:2010) CEN ISO/TS 11133-1:2009 Microbiology of food and animal feeding stuffs - Guidelines on preparation and production of culture media - Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory (ISO/TS 11133-1:2009) CEN ISO/TS 27687:2009 Nanotechnologies - Terminology and definitions for nano-objects - Nanoparticle, nanofibre and nanoplate (ISO/TS 27687:2008) CEN/TR 15996:2010 Hydrometry - Measurement of snow water equivalent using snow mass registration devices CEN/TR 16059:2010 Matanalyse Ytelseskriterier for enkelte laboratorie validerte metoder av analyse for bestemmelse av mykotoksiner Food analysis - Performance criteria for single laboratory validated methods of analysis for the determination of mycotoxins Listenummer: 18/2010 Side: 14 av 147
11 Helsevesen, Teknikk 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 10524-3:2006/prA1 Trykkregulatorer for medisinske gasser - Del 3: Trykkregulatorer med innebygde sylinderventiler (ISO 10524-3:2005/DAM 1:2010) Pressure regulators for use with medical gases - Part 3: Pressure regulators integrated with cylinder valves (ISO 10524-3:2005/DAM 1:2010) Kommentarfrist: 09.02.2011 EN ISO 11979-7:2006/prA1 Oftalmiske implantater - Intraokulære linser - Del 7: Kliniske undersøkelser (ISO 11979-7:2006/DAM 1:2011) Ophthalmic implants - Intraocular lenses - Part 7: Clinical investigations (ISO 11979-7:2006/DAM 1:2011) Kommentarfrist: 20.06.2011 EN ISO 14630:2009/prA1 Ikke-aktive kirurgiske implantater - Generelle krav - Amendment 1 (ISO 14630:2008/DAM 1:2011) Non-active surgical implants - General requirements - Amendment 1 (ISO 14630:2008/DAM 1:2011) Kommentarfrist: 13.06.2011 pren 12184 rev Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods Kommentarfrist: 06.06.2011 pren 16224 Health care provision by chiropractors Kommentarfrist: 09.05.2011 pren ISO 3826-1 Plastics collapsible containers for human blood and blood components - Part 1: Conventional containers (ISO/DIS 3826-1:2010) Kommentarfrist: 07.03.2011 pren ISO 5361 Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO/DIS 5361:2010) Kommentarfrist: 14.03.2011 pren ISO 8598-1 Optikk og optiske instrumenter - Focimeter - Del 1: Instrumenter for generell bruk (ISO/DIS 8598-1:2009) Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO/DIS 8598-1:2011) Kommentarfrist: 06.03.2011 pren ISO 8598-1 Optikk og optiske instrumenter - Focimeters - Del 1: Verktøy for generell bruk (ISO/DIS 8598-1:2011) Optics and optical instruments - Focimeters - Part 1: General purpose instruments (ISO/DIS 8598-1:2011) Kommentarfrist: 06.03.2011 Listenummer: 18/2010 Side: 15 av 147
11 Helsevesen, Teknikk pren ISO 11608-1 Needle-based injection systems for medical use - Requirements and test methods - Part 1: Needle-based injection systems (ISO/DIS 11608-1:2010) Kommentarfrist: 28.03.2011 pren ISO 11608-2 Needle-based injection systems for medical use - Requirements and test methods - Part 2: Needles (ISO/DIS 11608-2:2010) Kommentarfrist: 21.03.2011 pren ISO 11608-3 Needle-based injection systems for medical use - Requirements and test methods - Part 3: Finished containers (ISO/DIS 11608-3:2010) Kommentarfrist: 25.04.2011 pren ISO 11608-5 Needle-based injection systems for medical use - Requirements and test methods - Part 5: Automated functions (ISO/DIS 11608-5:2010) Kommentarfrist: 21.03.2011 pren ISO 11987 Ophtalmic optics - Contact lenses - Determination of shelf-life (ISO/DIS 11987:2011) Kommentarfrist: 13.06.2011 pren ISO 12836 Dentistry - Digitizing devices used in CAD/CAM systems - Test methods for assessing the accuracy and precision (ISO/DIS 12836:2011) Kommentarfrist: 20.06.2011 pren ISO 13504 Dentistry - General requirements for instruments and related accessories used in dental implant placement and treatment (ISO/DIS 13504:2011) Kommentarfrist: 06.06.2011 pren ISO 15189 Medisinske laboratorier - Krav til kvalitet og kompetanse (ISO/DIS 15189:2011) Medical laboratories - Requirements for quality and competence (ISO/DIS 15189:2011) Kommentarfrist: 30.05.2011 pren ISO 15197 In vitro diagnostic test systems - Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus (ISO/DIS 15197:2011) Kommentarfrist: 20.06.2011 pren ISO 19980 Øyeoptikk - Instrumenter - Korneatopografer (ISO/DIS 19980:2011) Ophthalmic instruments - Corneal topographers (ISO/DIS 19980:2011) Kommentarfrist: 13.06.2011 Listenummer: 18/2010 Side: 16 av 147
11 Helsevesen, Teknikk pren ISO 21672-1 Dentistry - Periodontal probes - Part 1: General requirements (ISO/DIS 21672-1:2011) Kommentarfrist: 13.06.2011 pren ISO 21672-2 Dentistry - Periodontal probes - Part 2: Designation (ISO/DIS 21672-2:2011) Kommentarfrist: 06.06.2011 pren ISO 23907 Sharps injury protection - Requirements and test methods - Part 3: Sharps containers (ISO/DIS 23907:2010) Kommentarfrist: 04.04.2011 Standardforslag til høring - internasjonale (ISO) ISO 11979-7:2006/DAmd 1 Kommentarfrist: 20.06.2011 ISO 14630:2008/DAmd 1 Kommentarfrist: 13.06.2011 ISO/DIS 3826-1 Plastics collapsible containers for human blood and blood components -- Part 1: Conventional containers Kommentarfrist: 07.03.2011 ISO/DIS 5361 Tracheal tubes and connectors (Revision of ISO 5361 parts 1 to 5 and ISO 7228:1993) Kommentarfrist: 14.03.2011 ISO/DIS 8598-1.2 Optics and optical instruments -- Focimeters -- Part 1: General purpose instruments Kommentarfrist: 06.03.2011 ISO/DIS 8835-7 Inhalational anaesthesia systems -- Part 7: Anaesthetic systems for use in areas with limited logistical supplies of electricity and anaesthetic gases Kommentarfrist: 03.04.2011 ISO/DIS 11040-6 Prefilled syringes -- Part 6: Plastic barrels for injectables Kommentarfrist: 03.04.2011 ISO/DIS 11608-1 Needle-based injection systems for medical use -- Requirements and test methods -- Part 1: Needle-based injection systems Kommentarfrist: 28.03.2011 Listenummer: 18/2010 Side: 17 av 147
11 Helsevesen, Teknikk ISO/DIS 11608-2 Needle-based injection systems for medical use -- Requirements and test methods -- Part 2: Needles Kommentarfrist: 21.03.2011 ISO/DIS 11608-3 Needle-based injection systems for medical use -- Requirements and test methods -- Part 3: Finished containers Kommentarfrist: 24.04.2011 ISO/DIS 11608-5 Needle-based injection systems for medical use -- Requirements and test methods -- Part 5: Automated functions Kommentarfrist: 21.03.2011 ISO/DIS 11608-1 Pen-injectors for medical use - Part 1: Requirements and test methods Kommentarfrist: 28.03.2011 ISO/DIS 11608-2 Pen-injectors for medical use - Part 2: Needles - Requirements and test methods Kommentarfrist: 21.03.2011 ISO/DIS 11987 Optics and optical instruments - Contact lenses - Methods for the determination of shelf-life Kommentarfrist: 13.06.2011 ISO/DIS 11987 Ophtalmic optics -- Contact lenses -- Determination of shelf-life Kommentarfrist: 13.06.2011 ISO/DIS 12836 Dentistry -- Digitizing devices used in CAD/CAM systems -- Test methods for assessing the accuracy and precision Kommentarfrist: 20.06.2011 ISO/DIS 13017 Dentistry -- Magnetic attachments Kommentarfrist: 13.06.2011 ISO/DIS 13022 Medical products containing viable human cells -- Application of risk management and requirements for processing practices Kommentarfrist: 22.02.2011 ISO/DIS 13504 Dentistry -- General requirements for instruments and related accessories used in dental implant placement and treatment Kommentarfrist: 06.06.2011 ISO/DIS 15189 Quality management in the medical laboratory Kommentarfrist: 30.05.2011 Listenummer: 18/2010 Side: 18 av 147
11 Helsevesen, Teknikk ISO/DIS 15189 Medical laboratories -- Requirements for quality and competence Kommentarfrist: 30.05.2011 ISO/DIS 15197 Determination of performance criteria for in vitro blood glucose monitoring systems for management of human diabets mellitus Kommentarfrist: 20.06.2011 ISO/DIS 15197 In vitro diagnostic test systems -- Requirements for blood-glucose monitoring systems for self-testing in managing diabetes mellitus Kommentarfrist: 20.06.2011 ISO/DIS 19980 Ophthalmic instruments -- Corneal topographers Kommentarfrist: 13.06.2011 ISO/DIS 19980 Ophthalmic instruments -- Corneal topographers Kommentarfrist: 13.06.2011 ISO/DIS 21672-1 Dentistry -- Periodontal probes -- Part 1: General requirements Kommentarfrist: 13.06.2011 ISO/DIS 21672-2 Dentistry -- Periodontal probes -- Part 2: Designation Kommentarfrist: 06.06.2011 ISO/DIS 23599 Assistive products for blind and vision impaired persons -- Tactile walking surface indicators Kommentarfrist: 27.02.2011 ISO/DIS 23907 Sharps injury protection -- Requirements and test methods -- Sharps containers Kommentarfrist: 04.04.2011 ISO-standarder ISO 14155:2011 Clinical investigation of medical devices for human subjects -- Good clinical practice Erstatter A00008:20:031723,A00008:20:032217 ISO 24501:2010 Ergonomics -- Accessible design -- Sound pressure levels of auditory signals for consumer products ISO 24502:2010 Ergonomics -- Accessible design -- Specification of age-related luminance contrast for coloured light Listenummer: 18/2010 Side: 19 av 147
11 Helsevesen, Teknikk ISO 27020:2010 Dentistry -- Brackets and tubes for use in orthodontics ISO 80369-1:2010 Small-bore connectors for liquids and gases in healthcare applications -- Part 1: General requirements ISO/TR 22442-4:2010 Medical devices utilizing animal tissues and their derivatives -- Part 4: Principles for elimination and/or inactivation of transmissible spongiform encephalopathy (TSE) agents and validation assays for those processes Rapporter fra CEN (CR) CEN ISO/TS 11135-2:2008/AC:2009 Sterilization of health care products - Ethylene oxide - Part 2: Guidance on the application of ISO 11135-1 (ISO/TS 11135-2:2008/Cor 1:2009) CEN ISO/TS 17665-2:2009 Sterilisering av helsetjenesteprodukter - Fuktig varme - Del 2: Veiledning for bruk av ISO 17665-1 (ISO/DTS 17665-2:2008) Sterilization of health care products - Moist heat - Part 2: Guidance on the application of ISO 17665-1 (ISO/TS 17665-2:2009) CEN ISO/TS 22367:2010 Medisinske laboratorier - Reduksjon av feil ved risikostyring og kontinuerlig forbedring (ISO/TS 22367:2008, inkludert Cor 1:2009) Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) CEN/TR 12401:2009 Tannpleie - Veiledning for klassifisering av medisinsk utstyr brukt i tannpleien Dentistry - Guidance on the classification of dental devices and accessories CEN/TR 15831:2009 Metode for kompresjonsprøving av strømper til medisinsk bruk Method for testing compression in medical hosiery CEN/TR 15913:2009 Kriterier for utforming av tilskueranlegg for tilskuere med nedsatt funksjonsevne Spectator facilities - Layout criteria for viewing area for spectators with special needs Fastsatte norske standarder NS-EN 15908:2010 Anestesi- og respirasjonsutstyr - Ikke-ombyttbare gjengede (NIST) lavtrykks koblingsstykker for medisinske gasser Anaesthetic and respiratory equipment - Non-interchangeable screw-threaded (NIST) low-pressure connectors for medical gases NS-EN ISO 1942:2010 Tannpleie - Terminologi (ISO 1942:2009, korrigert utgave 2010-03-01) Dentistry - Vocabulary (ISO 1942:2009, Corrected version 2010-03-01) Listenummer: 18/2010 Side: 20 av 147
11 Helsevesen, Teknikk NS-EN ISO 8536-4:2010 Infusjonsutstyr til medisinsk bruk - Del 4: Infusjonsutstyr til engangsbruk med falltilførsel (ISO 8536-4:2010) Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2010) NS-EN ISO 8835-3:2009/A1:2010 Endringsblad A1 - Systemer for inhalasjonsanestesi - Del 3: Overførings- og opptakssystemer i aktive systemer for fjerning av anestesigass (ISO 8835-3:2007/AMD 1:2010) Amendment A1 - Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007/AMD 1:2010) NS-EN ISO 9187-1:2010 Injeksjonsutstyr til medisinsk bruk - Del 1: Ampuller for injeksjonsvæsker (ISO 9187-1:2010) Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010) NS-EN ISO 9187-2:2010 Injeksjonsutstyr til medisinsk bruk - Del 2: Ampuller med ettpunktsbrekk (OPC) (ISO 9187-2:2010) Injection equipment for medical use - Part 2: One-point-cut (OPC) ampoules (ISO 9187-2:2010) NS-EN ISO 11986:2010 Øyeoptikk - Kontaktlinser og kontaktlinseprodukter - Bestemmelse av opptak og avgivelse av konserveringsmidler (ISO 11986:2010) Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release (ISO 11986:2010) NS-EN ISO 14729:2001/A1:2010 Endringsblad A1 - Øyeoptikk - Vedlikeholdsutstyr for kontaktlinser - Mikrobiologiske krav og prøvingsmetoder for produkter og hygienisk håndtering av kontaktlinser (ISO 14729:2001/Amd 1:2010) Amendment A1 - Ophthalmic optics - Contact lens care products - Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses (ISO 14729:2001/Amd 1:2010) NS-EN ISO 20072:2010 Verifisering av utformingen til utstyr for medikamenttilførsel i form av aerosol - Krav og prøvingsmetoder (ISO 20072:2009) Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009) NS-EN ISO 24500:2010 Ergonomi - Tilgjengelig utforming - Lydsignaler for forbrukerprodukter (ISO 24500:2010) Ergonomics - Accessible design - Auditory signals for consumer products (ISO 24500:2010) Tilbaketrukne norske standarder NS 11010:2008 Tilgjengelige reiselivsmål - Krav som grunnlag for merkeordning Accessible tourist destinations - Requirements as basis for a labelling system Språk: no NS-EN ISO 1942:2009 Tannpleie - Terminologi (ISO 1942:2009) Dentistry - Vocabulary (ISO 1942:2009) /fr Listenummer: 18/2010 Side: 21 av 147
11 Helsevesen, Teknikk NS-EN ISO 8536-4:2007 Infusjonsutstyr til medisinsk bruk - Del 4: Infusjonsutstyr til engangsbruk med falltilførsel (ISO 8536-4:2007) Infusion equipment for medical use - Part 4: Infusion sets for single use, gravity feed (ISO 8536-4:2007) NS-EN ISO 9187-1:2008 Injeksjonsutstyr til medisinsk bruk - Del 1: Ampuller for injeksjonsvæsker (ISO 9187-1:2006) Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2006) NS-EN ISO 9187-2:1999 Injeksjonsutstyr til medisinsk bruk - Del 2: Ampuller med ettpunktsbrekk (ISO 9187-2:1999) Injection equipment for medical use - Part 2: One-point-cut (OPC) ampoules (ISO 9187-2:1999) Erstattet av NS-EN ISO 9187-1:2003 NS-EN ISO 11986:2000 Øyeoptikk - Kontaktlinser og kontaklinseprodukter - Retninglinjer for bestemmelse av opptak og avgivelse av konserveringsmidler (ISO 11986:1999) Ophthalmic optics - Contact lenses and contact lens care products - Guidelines for the determination of preservative uptake and release (ISO 11986:1999) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO 9241-410:2008/prA1 Ergonomi for samhandling mellom menneske og system - Del 410: Designkriterier for fysiske innmatingsenheter (ISO 9241-410:2008/DAM 1:2010) Ergonomics of human-system interaction - Part 410: Design criteria for physical input devices (ISO 9241-410:2008/DAM 1:2010) Kommentarfrist: 16.02.2011 pren 482 Workplace exposure - General requirements for the performance of procedures for the measurement of chemical agents Kommentarfrist: 02.05.2011 pren 840-1 rev Trillbare avfallsbeholdere - Del 1: Beholdere med 2 hjul med kapasitet opptil 400 l for kamløfter - Dimensjoner og utforming Mobile waste containers - Containers with 2 wheels with a capacity up to 400 l for comb lifting devices, dimensions and design Kommentarfrist: 14.03.2011 pren 840-2 rev Trillbare avfallsbeholdere - Del 2: Beholdere, med kapasitet opptil 1 300 l, med 4 hjul og flatt lokk, for løftetapp og/eller kamløfter - Dimensjoner og utforming Mobile waste containers - Part 2: Containers with 4 wheels with a capacity up to 1 300 l with flat lid(s), for trunnion and/or comb lifting devices - Dimensions and design Kommentarfrist: 14.03.2011 Listenummer: 18/2010 Side: 22 av 147
13 Miljøvern. Helsevern. Sikkerhet pren 840-3 rev Trillbare avfallsbeholdere - Del 3: Beholdere, med kapasitet opptil 1 300 l, med 4 hjul og buet lokk, for løftetapp og/eller kamløfter - Dimensjoner og utforming Mobile waste containers - Part 3: Containers with 4 wheels with a capacity up to 1 300 l with dome lid(s), for trunnion and/or comb lifting devices - Dimensions and design Kommentarfrist: 14.03.2011 pren 840-4 rev Mobile waste containers - Part 4: Containers with 4 wheels with a capacity up to 1 700 l with flat lid(s), for wide trunnion or BGand/or wide comb lifting devices - Dimensions and design Kommentarfrist: 14.03.2011 pren 840-5 rev Trillbare avfallsbeholdere - Del 5: Ytelseskrav og prøvingsmetoder Mobile waste containers - Part 5: Performance requirements and test methods Kommentarfrist: 14.03.2011 pren 840-6 rev Trillbare avfallsbeholdere - Del 6: Helse- og sikkerhetskrav Mobile waste containers - Part 6: Safety and health requirements Kommentarfrist: 14.03.2011 pren 1366-11 Fire resistance tests for service installations - Part 11: Fire protective systems for cable systems and associated components Kommentarfrist: 28.03.2011 pren 1366-12 Fire resistance tests for service installations - Part 12: Non-mechanical fire dampers Kommentarfrist: 28.03.2011 pren 12619 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av totalt organisk karbon - Kontinuerlig flammeioniseringsdetektor-metode Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon - Continuous flame ionisation detector method Kommentarfrist: 20.06.2011 pren 13205 Arbeidsplassluft - Vurdering av ytelsen til instrumenter for måling av konsentrasjonene til luftbårne partikler Workplace exposure - Assessment of sampler performance for measurement of airborne particle concentrations Kommentarfrist: 09.02.2011 pren 14043 Maskinstiger og hydrauliske plattformer for brannvesenet - Automatiske stiger med kombinerte bevegelser - Sikkerhets- og ytelseskrav og prøvingsmetoder High rise aerial appliances for fire service use - Turntable ladders with combined movements - Safety and performance requirements and test methods Kommentarfrist: 16.02.2011 Listenummer: 18/2010 Side: 23 av 147
13 Miljøvern. Helsevern. Sikkerhet pren 14044 Maskinstiger og hydrauliske plattformer for brannvesenet - Semiautomatiske stiger - Sikkerhets- og ytelseskrav og prøvingsmetoder High rise aerial appliances for fire service use - Turntable ladders with sequential movements - Safety and performance requirements and test methods Kommentarfrist: 16.02.2011 pren 15882-2 Extended application of results from fire resistance tests for service installations - Part 2: Dampers Kommentarfrist: 14.03.2011 pren 15933 Soil, sludge, and treated biowaste - Determination of ph Kommentarfrist: 23.02.2011 pren 15933 Sludge, treated biowaste and soil - Determination of ph Kommentarfrist: 23.02.2011 pren 15934 Soil, sludge, waste, and treated biowaste - Determination of dry matter - Gravimetric method Kommentarfrist: 23.02.2011 pren 15934 Sludge, treated biowaste, soil and waste - Calculation of dry matter by determination of dry residue or water content Kommentarfrist: 23.02.2011 pren 15935 Soil, sludge, waste, and treated biowaste - Determination of loss on ignition Kommentarfrist: 23.02.2011 pren 15935 Sludge, treated biowaste, soil and waste - Determination of loss on ignition Kommentarfrist: 23.02.2011 pren 15936 Soil, sludge, waste, and treated biowaste - Determination of total organic carbon (TOC) by dry combustion Kommentarfrist: 23.02.2011 pren 15936 Sludge, treated biowaste, soil and waste - Determination of total organic carbon (TOC) by dry combustion Kommentarfrist: 23.02.2011 pren 15937 Soil, sludge, and treated biowaste - Determination of specific electrical conductivity Kommentarfrist: 23.02.2011 Listenummer: 18/2010 Side: 24 av 147
13 Miljøvern. Helsevern. Sikkerhet pren 15937 Sludge, treated biowaste and soil - Determination of specific electrical conductivity Kommentarfrist: 23.02.2011 pren 16161 Water quality - Guidance on the use of in vivo absorption techniques for the estimation of chlorophyll-a concentration in marine and fresh water samples Kommentarfrist: 07.03.2011 pren 16164 Vannkvalitet Veiledning i utforming og valg av bestemmelsesnøkler for taksonomisk identifisering Water quality - Guidance standard for designing and selecting taxonomic keys Kommentarfrist: 16.02.2011 pren 16166 Sludge, treated biowaste and soil - Determination of adsorbable organically bound halogens (AOX) Kommentarfrist: 02.05.2011 pren 16167 Sludge, treated biowaste and soil - Determination of polychlorinated biphenyls (PCB) by gas chromatography with mass selective detection (GC-MS) and gas chromatography with electron-capture detection (GC-ECD) Kommentarfrist: 02.05.2011 pren 16168 Sludge, treated biowaste and soil - Determination of total nitrogen using dry combustion method Kommentarfrist: 02.05.2011 pren 16169 Sludge, treated biowaste and soil - Determination of Kjeldahl nitrogen Kommentarfrist: 02.05.2011 pren 16170 Sludge, treated biowaste and soil - Determination of trace elements by inductively coupled plasma optical emission spectrometry (ICP-OES) Kommentarfrist: 02.05.2011 pren 16171 Sludge, treated biowaste and soil - Determination of trace elements using inductively coupled plasma mass spectrometry (ICP-MS) Kommentarfrist: 02.05.2011 pren 16172 Sludge, treated biowaste and soil - Determination of trace elements in aqua regia and nitric acid digests - Graphite furnace atomic absorption spectrometry method (GFAAS) Kommentarfrist: 02.05.2011 pren 16173 Sludge, treated biowaste and soil - Digestion of nitric acid soluble fractions of elements Kommentarfrist: 02.05.2011 Listenummer: 18/2010 Side: 25 av 147
13 Miljøvern. Helsevern. Sikkerhet pren 16174 Sludge, treated biowaste and soil - Digestion of aqua regia soluble fractions of elements Kommentarfrist: 02.05.2011 pren 16175-1 Sludge, treated biowaste and soil - Determination of mercury in aqua regia and nitric acid digests - Part 1: Cold vapour atomic absorption spectrometry (CVAAS) Kommentarfrist: 02.05.2011 pren 16175-2 Sludge, treated biowaste and soil - Determination of mercury in aqua regia and nitric acid digests - Part 2: Cold vapour atomic fluorescence spectrometry (CVAFS) Kommentarfrist: 02.05.2011 pren 16181 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Kommentarfrist: 14.03.2011 pren 16192 Characterization of waste - Analysis of eluates Kommentarfrist: 14.03.2011 pren 16231 Metodikk for benchmarking av energieffektivitet Energy efficiency benchmarking methodology Kommentarfrist: 06.06.2011 pren ISO 5667-3 Water quality - Sampling - Part 3: Preservation and handling of water samples (ISO/DIS 5667-3:2010) Kommentarfrist: 09.05.2011 pren ISO 6341 Vannanalyse - Bestemmelse av hemming av mobiliteten til Daphnia magna Straus (Cladocera, Crustacea) - Prøving av akutt toksisitet Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test (ISO/DIS 6341:2010) Kommentarfrist: 04.04.2011 pren ISO 12311 Personal protective equipment - Test methods for sunglasses and related equipment (ISO/DIS 12311:2011) Kommentarfrist: 13.06.2011 pren ISO 12782-1 Soil quality - Parameters for geochemical modelling of leaching and specification of constituents in soils and soil materials - Part 1: Extraction of amorphous iron oxides and hydroxides with ascorbic acid (ISO/DIS 12782-1:2010) Kommentarfrist: 25.04.2011 Listenummer: 18/2010 Side: 26 av 147
13 Miljøvern. Helsevern. Sikkerhet pren ISO 12782-2 Soil quality - Parameters for geochemical modelling of leaching and specification of constituents in soils and materials - Part 2: Extraction of crystalline iron oxides and hydroxides with dithionite (ISO/DIS 12782-2:2010) Kommentarfrist: 25.04.2011 pren ISO 12782-3 Soil quality - Parameters for geochemical modelling of leaching and specification of constituents in soils and materials - Part 3: Extraction of aluminium oxides and hydroxides with ammonium oxalate/oxalic acid (ISO/DIS 12782-3:2010) Kommentarfrist: 25.04.2011 pren ISO 12782-4 Soil quality - Parameters for geochemical modelling of leaching and specification of constituents in soils and materials - Part 4: Extraction of humic substances from solid samples (ISO/DIS 12782-4:2010) Kommentarfrist: 25.04.2011 pren ISO 12782-5 Soil quality - Parameters for geochemical modelling of leaching and specification of constituents in soils and materials - Part 5: Extraction of humic substances from aqueous samples (ISO/DIS 12782-5:2010) Kommentarfrist: 25.04.2011 pren ISO 12846 Water quality - Determination of mercury - Method using atomic absorption spectrometry (AAS) with and without enrichment (ISO/DIS 12846:2010) Kommentarfrist: 04.04.2011 pren ISO 13138 Air quality - Sampling conventions for airborne particle deposition in the human respiratory system (ISO/DIS 13138:2010) Kommentarfrist: 25.04.2011 pren ISO 13274 Emballasje - Transportemballasje for farlig gods - Forenlighetsprøving av plast for emballasje og IBCer (ISO/DIS 13274:2011) Packaging - Transport packaging for dangerous goods - Plastics compatibility testing for packaging and IBCs (ISO/DIS 13274:2011) Kommentarfrist: 30.05.2011 pren ISO 14045 Environmental management - Eco-efficiency assessment of product systems - Principles, requirements and guidelines (ISO/DIS 14045:2011) Kommentarfrist: 13.06.2011 pren ISO 14644-1 Cleanrooms and associated controlled environments - Part 1: Classification of air cleanliness by particle concentration (ISO/DIS 14644-1:2010) Kommentarfrist: 25.04.2011 pren ISO 14644-2 Cleanrooms and associated controlled environments - Part 2: Specifications for monitoring and periodic testing to prove continued compliance with ISO 14644-1 (ISO/DIS 14644-2:2010) Kommentarfrist: 25.04.2011 Listenummer: 18/2010 Side: 27 av 147
13 Miljøvern. Helsevern. Sikkerhet pren ISO 16495 Emballasje - Transportemballasje for farlig gods - Prøvingsmetoder Packaging - Transport packaging for dangerous goods - Test methods (ISO/DIS 16495:2010) Kommentarfrist: 28.03.2011 Standardforslag til høring - internasjonale (ISO) ISO 834-1:1999/DAmd 1 Kommentarfrist: 22.02.2011 ISO 6107-2:2006/DAmd 1 Kommentarfrist: 06.06.2011 ISO 9241-410:2008/DAmd 1 Kommentarfrist: 16.02.2011 ISO/DIS 5667-3 Water quality -- Sampling -- Part 3: Guidance on the preservation and handling of samples Kommentarfrist: 09.05.2011 ISO/DIS 5667-3 Water quality -- Sampling -- Part 3: Preservation and handling of water samples Kommentarfrist: 08.05.2011 ISO/DIS 6182-2 Fire protection -- Automatic sprinkler systems -- Part 2: Requirements and test methods for wet alarm valves, retard chambers and water motor alarms Kommentarfrist: 20.06.2011 ISO/DIS 6182-3 Fire protection -- Automatic sprinkler systems -- Part 3: Requirements and test methods for dry pipe valves Kommentarfrist: 20.06.2011 ISO/DIS 6182-5 Fire protection -- Automatic sprinkler systems -- Part 5: Requirements and test methods for deluge valves Kommentarfrist: 20.06.2011 ISO/DIS 6182-5 Fire protection - Automatic sprinkler systems - Part 5: Requirements and test methods for deluge valves Kommentarfrist: 20.06.2011 ISO/DIS 6341 Water quality - Determination of the inhibition of the mobility of Daphnia magna Straus (Cladocera, Crustacea) - Acute toxicity test Kommentarfrist: 04.04.2011 Listenummer: 18/2010 Side: 28 av 147