Annonseringsdato: 2017-01-04 Listenummer: 1/2017 Standardiseringsprosjekter og nye standarder Listenummer: 1/2017 Side: 1 av 101
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren 1885 Feather and down - Terms and definitions Kommentarfrist: 2017.03.02 pren 16603-60-21 Space engineering - Gyros terminology and performance specification Kommentarfrist: 2017.02.16 pren 17054 Biometrics multilingual vocabulary based upon the English version of ISO/IEC 2382-37 Kommentarfrist: 2017.01.12 pren ISO 6413 Technical product documentation - Representation of splines and serrations (ISO/DIS 6413:2016) Kommentarfrist: 2017.01.18 pren ISO 80000-4 Quantities and units - Part 4: Mechanics (ISO/DIS 80000-4:2016) Kommentarfrist: 2017.01.06 Standardforslag til høring - internasjonale (ISO) ISO/DIS 129-1.2 Technical product documentation (TPD) -- Presentation of dimensions and tolerances -- Part 1: General principles Kommentarfrist: 2017.01.24 ISO/DIS 6707-1 Buildings and civil engineering works -- Vocabulary -- Part 1: General terms Kommentarfrist: 2017.03.23 ISO/DIS 6707-2 Buildings and civil engineering works -- Vocabulary -- Part 2: Communication and contract terms Kommentarfrist: 2017.01.15 ISO/DIS 6707-1 Building and civil engineering - Vocabulary - Part 1: General terms [Revision of second edition (ISO 6707-1:1989)] Building and civil engineering - Vocabulary - Part 1: General terms [Revision of second edition (ISO 6707-1:1989)] Kommentarfrist: 2017.01.15 ISO/DIS 13006 Ceramic tile - Definitions, classification, characteristics and marking Kommentarfrist: 2017.03.06 Listenummer: 1/2017 Side: 2 av 101
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 16069 Grafiske symboler - Sikkerhetsskilt - Ledesystemer for rømningsveier Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) Kommentarfrist: 2017.01.10 ISO/DIS 16069 Graphical symbols -- Safety signs -- Safety way guidance systems (SWGS) Kommentarfrist: 2017.03.18 ISO/DIS 18841 Interpreting services -- General requirements and recommendations Kommentarfrist: 2017.01.10 ISO/DIS 20228 Legal interpreting Kommentarfrist: 2017.01.10 ISO/DIS 80000-4 Quantities and units -- Part 4: Mechanics Kommentarfrist: 2017.01.05 ISO/DIS 80000-4 Quantities and units -- Part 4: Mechanics Kommentarfrist: 2017.03.13 ISO/DIS 81346-12.2 Industrial systems, installations and equipment and industrial products -- Structuring principles and reference designations -- Part 12: Construction works and building services Kommentarfrist: 2017.01.26 ISO-standarder ISO 1213-2:2016 Solid mineral fuels -- Vocabulary -- Part 2: Terms relating to sampling, testing and analysis Erstatter A00008:20:005817 ISO 5492:2008/Amd 1:2016 Rapporter fra CEN (CR) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) Listenummer: 1/2017 Side: 3 av 101
01 Generelt. Terminologi. Standardisering. Dokumentasjon CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16981:2016 Photocatalysis - Glossary of terms Fastsatte norske standarder NS-EN 14037-1:2016 Fritthengende varme- og kjølepaneler for vannbåren varme med en temperatur på under 120 C - Del 1: Prefabrikkerte takmonterte varmepaneler for oppvarming av rom - Tekniske spesifikasjoner og krav Free hanging heating and cooling surfaces for water with a temperature below 120 C - Part 1: Pre-fabricated ceiling mounted radiant panels for space heating - Technical specifications and requirements Tilbaketrukne norske standarder NS-EN 14037-1:2003 Takmonterte varmepaneler for vannbåren varme under 120 C - Del 1: Tekniske spesifikasjoner og krav Ceiling mounted radiant panels supplied with water at temperature below 120 ºC - Part 1: Technical specifications and requirements 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - nasjonale prns 11031 Universell utforming - Persontransport - Krav til bussutforming Universal design - Passenger transport - Requirements for design of buses Språk: no Kommentarfrist: 2017.02.01 Listenummer: 1/2017 Side: 4 av 101
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport prns 11032 Universell utforming - Persontransport - Passasjerrettigheter Universal design - Passenger transport - Passengers rights Språk: no Kommentarfrist: 2017.02.01 prns 11033 Universell utforming - Persontransport - Tjenester på transportområdet Universal design - Passenger transport - Transport services Språk: no Kommentarfrist: 2017.02.01 Standardforslag til høring - europeiske (CEN) pren ISO 16410-1 Electronic fee collection - Evaluation of equipment for conformity to ISO 17575-3 - Part 1: Test suite structure and test purposes (ISO/DIS 16410-1:2016) Kommentarfrist: 2017.02.07 pren ISO 17427-1 Intelligent transport systems - Cooperative ITS - Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) (ISO/DIS 17427-1) Kommentarfrist: 2017.02.07 Standardforslag til høring - internasjonale (ISO) ISO/DIS 7870-1 Control charts -- Part 1: General guidelines Kommentarfrist: 2017.02.16 ISO/DIS 14813-6 Intelligent transport systems -- Reference model architecture(s) for the ITS sector -- Part 6: Data presentation in ASN.1 Kommentarfrist: 2017.01.28 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) Kommentarfrist: 2017.02.24 ISO/DIS 16410-1 Electronic fee collection -- Evaluation of equipment for conformity to ISO 17575-3 -- Part 1: Test suite structure and test purposes Kommentarfrist: 2017.02.06 ISO/DIS 17427-1 Intelligent transport systems -- Cooperative ITS -- Part 1: Roles and responsibilities in the context of co-operative ITS architecture(s) Kommentarfrist: 2017.02.06 ISO/DIS 18841 Interpreting services -- General requirements and recommendations Kommentarfrist: 2017.01.10 Listenummer: 1/2017 Side: 5 av 101
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 20228 Legal interpreting Kommentarfrist: 2017.01.10 ISO/DIS 21503 Project, programme and portfolio management -- Guidance on programme management Kommentarfrist: 2017.02.21 ISO-standarder ISO/TS 9002:2016 Quality management systems -- Guidelines for the application of ISO 9001:2015 ISO/TS 21219-23:2016 Intelligent transport systems - Traffic and travel information (TTI) via transport protocol experts group, generation 2 (TPEG2) -- Part 23: Roads and multimodal routes (TPEG2-RMR) Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) CEN ISO/TS 17425:2016 Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data (ISO/TS 17425:2016) CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 16797-1:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR 16797-2:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background Listenummer: 1/2017 Side: 6 av 101
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16886:2016 Guidance on the application of statistical methods for determining the properties of masonry products CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management CEN/TS 16555-7:2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment Listenummer: 1/2017 Side: 7 av 101
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE CEN/TS 419261:2015 Security requirements for trustworthy systems managing certificates and time-stamps Fastsatte norske standarder NS-EN 15876-2:2016 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr med NS-EN 15509 - Del 2: Generelt testopplegg Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite NS-EN 16872:2016 Tjenester fra leger med tilleggskvalifikasjoner innenfor homeopati - Krav til levering av helsetjenester av leger med tilleggskvalifikasjoner innenfor homeopati Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy Tilbaketrukne norske standarder NS-EN 15876-2:2011 Elektronisk avgiftsinnkreving - Evaluering av samsvar av kjøretøyenhet og veikantutstyr mot NS-EN 15509 - Del 2: Generelt prøvingssett Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to EN 15509 - Part 2: Abstract test suite 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 18593 Microbiology of the food chain - Horizontal methods for sampling techniques from surfaces using contact plates and swabs (ISO/DIS 18593:2016) Kommentarfrist: 2017.01.18 Listenummer: 1/2017 Side: 8 av 101
07 Matematikk. Naturvitenskap Standardforslag til høring - internasjonale (ISO) ISO/DIS 11737-1 Sterilization of health care products -- Microbiological methods -- Part 1: Determination of a population of microorganisms on product Kommentarfrist: 2017.02.18 ISO/DIS 18593 Fôr- og næringsmiddelmikrobiologi - Horisontal metode for prøveuttak fra overflater med kontaktskåler og svabringsmetoder Microbiology of food and animal feeding stuffs -- Horizontal method for sampling techniques from surfaces using contact plates and swab methods Kommentarfrist: 2017.01.17 ISO/DIS 18593 Microbiology of the food chain -- Horizontal methods for sampling techniques from surfaces using contact plates and swabs Kommentarfrist: 2017.03.25 ISO-standarder ISO/TR 18196:2016 Nanotechnologies -- Measurement technique matrix for the characterization of nano-objects ISO/TR 18637:2016 Nanotechnologies -- Overview of available frameworks for the development of occupational exposure limits and bands for nanoobjects and their aggregates and agglomerates (NOAAs) Rapporter fra CEN (CR) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) Listenummer: 1/2017 Side: 9 av 101
07 Matematikk. Naturvitenskap CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TS 15634-3:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 15634-4:2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 15634-5:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies CEN/TS 17010:2016 Nanotechnologies - Guidance on measurands for characterising nano-objects and materials that contain them Listenummer: 1/2017 Side: 10 av 101
07 Matematikk. Naturvitenskap 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN 455-3:2015/prA1 Engangshansker til medisinsk bruk - Del 3: Krav til og prøving av biokompatibilitet Medical gloves for single use - Part 3: Requirements and testing for biological evaluation Kommentarfrist: 2017.01.12 EN 14476:2013+A1:2015/prA2 Kjemiske desinfeksjonsmidler og antiseptika - Kvantitativ suspensjonsprøving for evaluering av virusaktivitet på det medisinske området - Prøvingsmetode og krav (fase 2, trinn 1) Chemical disinfectants and antiseptics - Quantitative suspension test for the evaluation of virucidal activity in the medical area - Test method and requirements (Phase 2/Step 1) Kommentarfrist: 2017.02.09 pren 16777 Chemical disinfectants and antiseptics - Quantitative non-porous surface test without mechanical action for the evaluation of virucidal activity of chemical disinfectants used in the medical area - Test method and requirements (phase 2/step 2) Kommentarfrist: 2017.02.16 pren ISO 7886-3 Sterile hypodermiske injeksjonssprøyter til engangsbruk - Del 3: Selvblokkerende sprøyter for vaksinasjon med fastsatt dose (ISO/DIS 7886-3:2016) Sterile hypodermic syringes for single use - Part 3: Auto-disable syringes for fixed-dose immunization (ISO/DIS 7886-3:2016) Kommentarfrist: 2017.02.13 pren ISO 10939 Oftalmiske instrumenter - Spaltlamper (ISO/FDIS 10939:2016) Ophthalmic instruments - Slit-lamp microscopes (ISO/FDIS 10939:2016) Kommentarfrist: 2017.01.29 pren ISO 11986 Øyeoptikk - Kontaktlinser og kontaktlinseprodukter - Bestemmelse av opptak og avgivelse av konserveringsmidler (ISO/DIS 11986:2016) Ophthalmic optics - Contact lenses and contact lens care products - Determination of preservative uptake and release (ISO/DIS 11986:2016) Kommentarfrist: 2017.02.01 pren ISO 18472 Sterilisering av helsetjenesteprodukter - Biologiske og kjemiske indikatorer - Prøvingsutstyr (ISO/DIS 18472:2016) Sterilization of health care products - Biological and chemical indicators - Test equipment (ISO/DIS 18472:2016) Kommentarfrist: 2017.02.02 pren ISO 18618 Dentistry - Interoperability of CAD/CAM systems (ISO/DIS 18618:2016) Kommentarfrist: 2017.01.27 Listenummer: 1/2017 Side: 11 av 101
11 Helsevesen, Teknikk pren ISO 18618 Dentistry - Interoperability of CAD/CAM systems (ISO/DIS 18618:2016) Kommentarfrist: 2017.01.27 pren ISO 80601-2-61 Medisinsk elektrisk utstyr - Del 2-61: Spesielle krav til grunnleggende sikkerhet og avgjørende ytelse for pulsoksimeterutstyr (ISO/DIS 80601-2-61:2016) Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO/DIS 80601-2-61:2016) Kommentarfrist: 2017.01.09 Standardforslag til høring - internasjonale (ISO) ISO/DIS 6710 Single-use containers for venous blood specimen collection Kommentarfrist: 2017.03.11 ISO/DIS 7886-3 Sterile hypodermic syringes for single use -- Part 3: Auto-disable syringes for fixed-dose immunization Kommentarfrist: 2017.02.12 ISO/DIS 7886-3 Sterile hypodermic syringes for single use -- Part 3: Auto-disabled syringes for fixed-dose immunization Kommentarfrist: 2017.04.20 ISO/DIS 11195 Gas mixers for medical use -- Stand-alone gas mixers Kommentarfrist: 2017.02.18 ISO/DIS 11737-1 Sterilization of health care products -- Microbiological methods -- Part 1: Determination of a population of microorganisms on product Kommentarfrist: 2017.02.18 ISO/DIS 11986 Optics and optical instruments - Contact lenses and contact lens care products - Test methods for preservative uptake and release Kommentarfrist: 2017.01.31 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) Kommentarfrist: 2017.02.24 ISO/DIS 18472 Sterilization of health care products -- Biological and chemical indicators -- Test equipment Kommentarfrist: 2017.02.01 Listenummer: 1/2017 Side: 12 av 101
11 Helsevesen, Teknikk ISO/DIS 18472 Sterilization of health care products -- Biological and chemical indicators -- Test equipment Kommentarfrist: 2017.04.09 ISO/DIS 18618.2 Dentistry -- Interoperability of CAD/CAM systems Kommentarfrist: 2017.01.26 ISO/DIS 21533 Dentistry -- Reusable dental syringes designed for intraligamentary injections Kommentarfrist: 2017.03.02 ISO/DIS 21533 Dentistry -- Reusable cartridge syringes intended for intraligamentary injections Kommentarfrist: 2017.05.08 ISO/DIS 80601-2-55 Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors Kommentarfrist: 2017.02.20 ISO/DIS 80601-2-61 Medical electrical equipment -- Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment Kommentarfrist: 2017.03.16 ISO/DIS 80601-2-61 Medical electrical equipment -- Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use Kommentarfrist: 2017.01.08 ISO-standarder ISO 5832-7:2016 Implants for surgery -- Metallic materials -- Part 7: Forgeable and cold-formed cobalt-chromium-nickel-molybdenum-iron alloy Erstatter A00008:20:011991 ISO 7199:2016 Cardiovascular implants and artificial organs -- Blood-gas exchangers (oxygenators) Erstatter A00008:20:051030,A00008:20:055930 ISO 19054:2005/Amd 1:2016 ISO 21535:2007/Amd 1:2016 ISO 22882:2016 Castors and wheels -- Requirements for castors for hospital beds Listenummer: 1/2017 Side: 13 av 101
11 Helsevesen, Teknikk ISO/TR 15499:2016 Biological evaluation of medical devices -- Guidance on the conduct of biological evaluation within a risk management process Erstatter A00008:20:055441 ISO/TR 28642:2016 Dentistry -- Guidance on colour measurement Erstatter A00008:20:044846 ISO/TS 20746:2016 Dentistry -- Determination of the strength of dental amalgam by the Hertzian indentation strength (HIT) method Rapporter fra CEN (CR) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS 16826-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS 16826-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS 16827-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS 16827-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins CEN/TS 16827-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS 16835-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS 16835-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA Listenummer: 1/2017 Side: 14 av 101
11 Helsevesen, Teknikk CEN/TS 16835-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16945:2016 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma Fastsatte norske standarder NS-EN 16872:2016 Tjenester fra leger med tilleggskvalifikasjoner innenfor homeopati - Krav til levering av helsetjenester av leger med tilleggskvalifikasjoner innenfor homeopati Services of Medical Doctors with additional qualification in Homeopathy (MDQH) - Requirements for health care provision by Medical Doctors with additional qualification in Homeopathy NS-EN ISO 5361:2016 Anestesi- og respirasjonsutstyr - Trakealtuber og koblingsstykker (ISO 5361:2016) Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2016) NS-EN ISO 5364:2016 Anestesi- og respirasjonsutstyr - Orofaryngeale luftveier (ISO 5364:2016) Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2016) NS-EN ISO 5366:2016 Anestesi- og respirasjonsutstyr - Trakeostomituber og forbindelser (ISO 5366:2016) Anaesthetic and respiratory equipment - Tracheostomy tubes and connectors (ISO 5366:2016) NS-EN ISO 7153-1:2016 Kirurgiske instrumenter - Materialer - Del 1: Metaller (ISO 7153-1:2016) Surgical instruments - Materials - Part 1: Metals (ISO 7153-1:2016) NS-EN ISO 8536-13:2016 Infusjonsutstyr til medisinsk bruk - Del 13: Graderte strømningsregulatorer for engangsbruk med kontakt med væske (ISO 8536-13:2016) Infusion equipment for medical use - Part 13: Graduated flow regulators for single use with fluid contact (ISO 8536-13:2016) NS-EN ISO 10938:2016 Oftalmisk opptikk - Synstavler for synsprøver - Trykte, projiserte og elektroniske (ISO 10938:2016) Ophthalmic optics - Chart displays for visual acuity measurement - Printed, projected and electronic (ISO 10938:2016) NS-EN ISO 11381:2016 Oftalmisk optikk - Brilleinnfatninger - Skruegjenger (ISO 11381:2016) Ophthalmic optics - Spectacle frames - Screw threads (ISO 11381:2016) Listenummer: 1/2017 Side: 15 av 101
11 Helsevesen, Teknikk NS-EN ISO 17509:2016 Tannpleie - Momentnøkkel til håndstykker benyttet for implantering (ISO 17509:2016) Dentistry - Torque transmitter for handpieces (ISO 17509:2016) Tilbaketrukne norske standarder NS-EN ISO 5361:2012 Anestesi og respirasjonsutstyr - Trakealtuber og koblingsstykker (ISO 5361:2012) Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO 5361:2012) NS-EN ISO 5361:2012/AC:2012 Rettelsesblad AC - Anestesi- og respirasjonsutstyr - Trakealtuber og koblingsstykker - Teknisk rettelsesblad 1 (ISO 5361:2012/Cor 1:2012) Corrigendum AC - Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Technical Corrigendum 1 (ISO 5361:2012/Cor 1:2012) NS-EN ISO 5364:2011 Anestesi og respirasjonsutstyr - Orofaryngeale luftveier (ISO 5364:2008) Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO 5364:2008) NS-EN ISO 5366-1:2009 Anestesi- og respirasjonsutstyr - Trakeostomituber - Del 1: Tuber og forbindelser for voksne (ISO 5366-1:2000) Anaesthetic and respiratory equipment - Tracheostomy tubes - Part 1: Tubes and connectors for use in adults (ISO 5366-1:2000) NS-EN ISO 7153-1:2000 Tannpleie - Kirurgiske instrumenter - Metalliske materialer - Del 1: Rustfritt stål (ISO 7153-1:1991, innbefattet endringsblad A1:1999) Surgical instruments - Metallic materials - Part 1: Stainless steel (ISO 7153-1:1991, including Amendment A1:1999) NS-EN ISO 10938:1998 Ophthalmic instruments - Chart projectors (ISO 10938:1998) NS-EN ISO 11381:1996 Optikk og optiske instrumenter - Øyeoptikk - Skrugjenger (gjengesnitt) (ISO 11381:1994) Optics and optical instruments - Ophthalmic optics - Screw threads (ISO 11381:1994) Listenummer: 1/2017 Side: 16 av 101
13 Miljøvern. Helsevern. Sikkerhet 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) EN ISO 14044:2006/prA1 Environmental management - Life cycle assessment - Requirements and guidelines (ISO 14044:2006/DAM 1:2016) Kommentarfrist: 2017.02.22 EN ISO 28927-2:2009/prA1 Kraftdrevet håndverktøy - Metoder for måling av vibrasjonsemisjon - Del 2: Slående muttertrekkere, muttertrekkere og skrutrekkere Endringsblad 1: Endringer i tillegg C - Bremsesystem Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches, nutrunners and screwdrivers - Amendment 1: Changes in annex C - Brake device (ISO 28927-2:2009/DAmd 1:2016) Kommentarfrist: 2017.02.11 pren 1149-5 Vernetøy - Elektrostatiske egenskaper - Del 5: Ytelseskrav til materialer og utforming Protective clothing - Electrostatic properties - Part 5: Material performance and design requirements Kommentarfrist: 2017.02.02 pren 12941 Respiratory protective devices - Powered filtering devices incorporating a loose fitting respiratory interface - Requirements, testing, marking Kommentarfrist: 2017.03.02 pren 12942 Respiratory protective devices - Power filtering devices incorporating full face masks, half masks or quarter masks - Requirements, testing, marking Kommentarfrist: 2017.03.02 pren 13077 Beskyttelsesutstyr for å hindre forurensning av drikkevann ved tilbakestrømming - Luftgap med ikke-sirkulært overløp (uhindret) - Gruppe A - Type B Devices to prevent pollution by backflow of potable water - Air gap with non-circular overflow (unrestricted) - Family A - Type B Kommentarfrist: 2017.03.02 pren 13819-3 Hearing protectors - Testing - Part 3: Supplementary acoustic test method Kommentarfrist: 2017.02.16 pren 14187-7 Cold applied joint sealants - Test methods - Part 7: Determination of the resistance to flame Kommentarfrist: 2017.02.23 pren 14460 Utstyr for eksplosjonsmotstand Explosion resistant equipment Kommentarfrist: 2017.02.16 Listenummer: 1/2017 Side: 17 av 101
13 Miljøvern. Helsevern. Sikkerhet pren 14593-1 Respiratory protective devices - Compressed air line breathing apparatus with demand valve - Part 1: Devices with a full face mask- Requirements, testing and marking Kommentarfrist: 2017.03.02 pren 14594 Respiratory protective devices - Continuous flow compressed air line breathing devices - Requirements, testing and marking Kommentarfrist: 2017.03.02 pren 15254-4 Utvidet anvendelse av resultater fra brannmotstandsprøving - Ikke-bærende vegger - Del 4: Glasskonstruksjoner Extended application of results from fire resistance tests - Non-loadbearing walls - Part 4: Glazed constructions Kommentarfrist: 2017.02.16 pren 15254-5 Utvidet anvendelse av resultater fra brannmotstandsprøving - Ikke-bærende vegger - Del 5: Sandwichkonstruksjoner av metall Extended application of results from fire resistance tests - Non-loadbearing walls - Part 5: Metal sandwich panel construction Kommentarfrist: 2017.02.09 pren 15254-7 Utvidet anvendelse av resultater fra brannmotstandsprøving - Ikke-bærende himlinger - Del: 7 Sandwichkonstruksjoner av metall Extended application of results from fire resistance tests - Non-loadbearing ceilings - Part 7: Metal sandwich panel construction Kommentarfrist: 2017.02.16 pren 15269-11 Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 11: Fire resistance for operable fabric curtains Kommentarfrist: 2017.02.09 pren 17058 Workplace exposure - Assessment of inhalation exposure to nano-objects and their agglomerates and aggregates Kommentarfrist: 2017.01.26 pren ISO 9241-11 Ergonomi for samhandling mellom menneske og system - Del 11: Brukskvalitet. Definisjoner og begreper (ISO/DIS 9241-11:2015) Ergonomics of human-system interaction - Part 11: Usability: Definitions and concepts (ISO/DIS 9241-11:2016) Kommentarfrist: 2017.01.18 pren ISO 9241-11 Ergonomics of human-system interaction - Part 11: Usability: Definitions and concepts (ISO/DIS 9241-11:2016) Kommentarfrist: 2017.01.18 pren ISO 11393-1 Protective clothing for users of hand-held chain-saws - Part 1: Test rig for testing resistance to cutting by a chain-saw (ISO/DIS 11393-1:2016) Kommentarfrist: 2017.03.02 Listenummer: 1/2017 Side: 18 av 101
13 Miljøvern. Helsevern. Sikkerhet pren ISO 11393-2 Protective clothing for users of hand-held chainsaws - Part 2: Performance requirements and test methods for leg protectors (ISO/DIS 11393-2:2016) Kommentarfrist: 2017.03.02 pren ISO 11393-3 Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear (ISO/DIS 11393-3:2016) Kommentarfrist: 2017.03.02 pren ISO 11393-4 Protective clothing for users of hand-held chain-saws - Part 4: Test methods and performance requirements for protective gloves (ISO/DIS 11393-4:2016) Kommentarfrist: 2017.03.02 pren ISO 11393-5 Protective clothing for users of hand-held chain-saws - Part 5: Test methods and performance requirements for protective gaiters (ISO/DIS 11393-5:2016) Kommentarfrist: 2017.03.02 pren ISO 11393-6 Protective clothing for users of hand-held chain-saws - Part 6: Test methods and performance requirements for upper body protectors (ISO/DIS 11393-6:2016) Kommentarfrist: 2017.03.02 pren ISO 11553-1 Safety of machinery - Laser processing machines - Part 1: General safety requirements (ISO/DIS 11553-1:2016) Kommentarfrist: 2017.02.21 pren ISO 11553-2 Safety of machinery - Laser processing machines - Part 2: Safety requirements for hand-held laser processing devices (ISO/DIS 11553-2:2016) Kommentarfrist: 2017.02.21 pren ISO 14644-3 Renrom og tilhørende kontrollerte omgivelser - Del 3: Prøvingsmetoder Cleanrooms and associated controlled environments - Part 3: Test methods (ISO/DIS 14644-3:2016) Kommentarfrist: 2017.02.03 pren ISO 15384 Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing (ISO/DIS 15384:2016) Kommentarfrist: 2017.01.18 pren ISO 23161 Soil quality - Determination of selected organotin compounds - Gas-chromatographic method (ISO/FDIS 23161:2016) Kommentarfrist: 2017.02.23 Listenummer: 1/2017 Side: 19 av 101
13 Miljøvern. Helsevern. Sikkerhet pren ISO 23611-1 Soil quality - Sampling of soil invertebrates - Part 1: Hand-sorting and extraction of earthworms (ISO/DIS 23611-1:2016) Kommentarfrist: 2017.02.01 pren ISO 27500 The human-centred organization - Rationale and general principles (ISO 27500:2016) Kommentarfrist: 2017.03.02 Standardforslag til høring - internasjonale (ISO) ISO 14044:2006/DAmd 1 Kommentarfrist: 2017.02.21 ISO/DIS 7240-5 Fire detection and alarm systems -- Part 5: Point-type heat detectors Kommentarfrist: 2017.02.08 ISO/DIS 9241-11.2 Ergonomics of human-system interaction -- Part 11: Usability: Definitions and concepts Kommentarfrist: 2017.04.22 ISO/DIS 11393-1 Protective clothing for users of hand-held chain-saws -- Part 1: Test rig for testing resistance to cutting by a chain-saw Kommentarfrist: 2017.03.01 ISO/DIS 11393-2 Protective clothing for users of hand-held chainsaws -- Part 2: Performance requirements and test methods for leg protectors Kommentarfrist: 2017.05.07 ISO/DIS 11393-3 Protective clothing for users of hand-held chain-saws -- Part 3: Test methods for footwear Kommentarfrist: 2017.05.07 ISO/DIS 11393-4 Protective clothing for users of hand-held chain-saws -- Part 4: Test methods and performance requirements for protective gloves Kommentarfrist: 2017.05.07 ISO/DIS 11393-5 Protective clothing for users of hand-held chain-saws -- Part 5: Test methods and performance requirements for protective gaiters Kommentarfrist: 2017.05.07 ISO/DIS 11393-6 Protective clothing for users of hand-held chain-saws -- Part 6: Test methods and performance requirements for upper body protectors Kommentarfrist: 2017.03.01 Listenummer: 1/2017 Side: 20 av 101
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 11393-6 Protective clothing for users of hand-held chain-saws -- Part 6: Test methods and performance requirements for upper body protectors Kommentarfrist: 2017.05.07 ISO/DIS 11393-2 Protective clothing for users of hand-held chain-saws - Part 2: Test methods and performance requirements for leg protectors Kommentarfrist: 2017.03.01 ISO/DIS 11393-3 Protective clothing for users of hand-held chain-saws - Part 3: Test methods for footwear Kommentarfrist: 2017.03.01 ISO/DIS 11393-4 Protective clothing for users of hand-held chain-saws -- Part 4: Test methods and performance requirements for protective gloves Kommentarfrist: 2017.03.01 ISO/DIS 11393-5 Protective clothing for users of hand-held chain-saws - Part 5: Test methods and performance requirements for protective gaiters Kommentarfrist: 2017.03.01 ISO/DIS 11553-2 Safety of machinery -- Laser processing machines -- Part 2: Safety requirements for hand-held laser processing devices Kommentarfrist: 2017.02.20 ISO/DIS 11613 Protective clothing for firefighters - Laboratory test methods and performance requirements Kommentarfrist: 2017.02.06 ISO/DIS 12807 Leakage testing on packages for the safe transport of radioactive materials Kommentarfrist: 2017.01.30 ISO/DIS 14026 Environmental labels and declarations -- Principles, requirements and guidelines for communication of footprint information Kommentarfrist: 2017.02.22 ISO/DIS 14146 Radiological protection -- Criteria and performance limits for the periodic evaluation of dosimetry services Kommentarfrist: 2017.05.04 ISO/DIS 14644-3 Renrom og tilhørende kontrollerte omgivelser - Del 3: Metrologi og testmetoder (ISO/DIS 14644-3:2002) Cleanrooms and associated controlled environments -- Part 3: Metrology and test methods Kommentarfrist: 2017.03.02 Listenummer: 1/2017 Side: 21 av 101
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 14644-3 Cleanrooms and associated controlled environments -- Part 3: Test methods Kommentarfrist: 2017.05.08 ISO/DIS 15384 Protective clothing for firefighters - Laboratory test methods and performance requirements for wildland firefighting clothing Kommentarfrist: 2017.01.17 ISO/DIS 16304 Ships and marine technology -- Marine environment protection -- Arrangement and management of port waste reception facilities Kommentarfrist: 2017.02.23 ISO/DIS 19461-1 Radiological protection -- Measurement for the clearance of waste contaminated with radioisotopes for medical application -- Part 1: Measurement of radioactivity Kommentarfrist: 2017.04.20 ISO/DIS 20902-1 Fire test procedures for divisional elements that are typically used in oil, gas and petrochemical industries -- Part 1: General requirements Kommentarfrist: 2017.04.23 ISO/DIS 21070 Ships and marine technology -- Marine environmental protection -- Management and handling of shipboard garbage Kommentarfrist: 2017.02.07 ISO/DIS 21070 Ships and marine technology -- Marine environment protection -- Management and handling of shipboard garbage Kommentarfrist: 2017.04.15 ISO/DIS 23611-1 Soil quality -- Sampling of soil invertebrates -- Part 1: Hand-sorting and formalin extraction of earthworms Kommentarfrist: 2017.01.31 ISO/DIS 23611-1 Soil quality -- Sampling of soil invertebrates -- Part 1: Hand-sorting and extraction of earthworms Kommentarfrist: 2017.04.08 ISO-standarder ISO 10256-1:2016 Protective equipment for use in ice hockey -- Part 1: General requirements Erstatter A00008:20:028672 ISO 10256-2:2016 Protective equipment for use in ice hockey -- Part 2: Head protection for skaters Erstatter A00008:20:028672 Listenummer: 1/2017 Side: 22 av 101
13 Miljøvern. Helsevern. Sikkerhet ISO 10256-3:2016 Protective equipment for use in ice hockey -- Part 3: Face protectors for skaters Erstatter A00008:20:028672 ISO 10256-4:2016 Protective equipment for use in ice hockey -- Part 4: Head and face protection for goalkeepers Erstatter A00008:20:028672 ISO 16075-4:2016 Guidelines for treated wastewater use for irrigation projects -- Part 4: Monitoring ISO 37100:2016 Sustainable cities and communities -- Vocabulary ISO/TS 5660-4:2016 Reaction-to-fire tests -- Heat release, smoke production and mass loss rate -- Part 4: Measurement of low levels of heat release Rapporter fra CEN (CR) CEN ISO/TR 9241-308:2015 Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter displays (SED) (ISO/TR 9241-308:2008) CEN ISO/TR 9241-309:2015 Ergonomics of human-system interaction - Part 309: Organic light-emitting diode (OLED) displays (ISO/TR 9241-309:2008) CEN ISO/TR 9241-310:2015 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and ergonomics of pixel defects (ISO/TR 9241-310:2010) CEN ISO/TS 14071:2016 Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014) CEN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions Listenummer: 1/2017 Side: 23 av 101
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16710-1:2015 Ergonomics methods Part 1: Feedback method - A method to understand how end users perform their work with machines Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes CEN/TR 16793:2016 Veiledning for valg, anvendelse og bruk av flammefeller Guide for the selection, application and use of flame arresters CEN/TR 16823:2015 Railway applications - Driver's cab - Background information on anthropometric data CEN/TR 16829:2016 Forebyggelse av og vern mot eksplosjon og brann for koppelevatorer Fire and explosion prevention and protection for bucket elevators CEN/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering CEN/TR 16949:2016 Road restraint system - Pedestrian restraint system - Pedestrian parapets CEN/TR 16957:2016 Bio-based products - Guidelines for Life Cycle Inventory (LCI) for the End-of-life phase CEN/TR 16998:2016 Ambient air - Report on nitro- and oxy-pahs - Origin, toxicity, concentrations and measurement methods CEN/TR 17004:2016 Mechanical products - Conditions to set up environmental communication models by recognizing sectorial particularities CEN/TS 54-32:2015 Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Listenummer: 1/2017 Side: 24 av 101
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs CEN/TS 13649:2014 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption CEN/TS 15864:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med kontinuerlig fornyelse av utlekkingsvæske under betingelser relevant for spesifiserte scenario(er) Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16115-2:2016 Ambient air - Measurement of bioaerosols - Part 2: Planning and evaluation of plant-related plume measurements CEN/TS 16637-3:2016 Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test CEN/TS 16660:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity CEN/TS 16663:2016 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TS 16692:2015 Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i totale vannprøver - Metode med fastfaseekstraksjon (SPE) med SPEplater og gasskromatografi med trippel kvadrupol-massespektrometri (GC-MS/MS) Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods Listenummer: 1/2017 Side: 25 av 101
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16822:2015 Textiles and textile products - Self-declared environmental claims - Use of the terms CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) CEN/TS 16868:2015 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method CEN/TS 16916:2016 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol Fastsatte norske standarder NS-EN 13204:2016 Dobbeltvirkende hydrauliske redningsverktøy for brann- og redningstjenestebruk - Sikkerhets- og ytelseskrav Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements NS-EN 15269-5:2014+A1:2016 Utvidet bruk av resultater fra prøving av brannmotstand og røyktetthet av dører, porter, luker og åpningsbare vinduer, inklusive bygningsdelenes beslag - Del 5: Brannmotstand til hengslede dører og svingdører av glass med rammeverk av metall og åpningsbare vinduer Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows NS-EN 15308:2016 Karakterisering av avfall - Bestemmelse av utvalgte polyklorinerte bifenyler (PCB) i fast avfall ved bruk av gasskromatografi med elektronfangst eller massespektrometrisk påvisning Characterization of waste - Determination of selected polychlorinated biphenyls (PCB) in solid waste by gas chromatography with electron capture or mass spectrometric detection Listenummer: 1/2017 Side: 26 av 101
13 Miljøvern. Helsevern. Sikkerhet NS-EN 16170:2016 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i optisk emisjonsspektrometri (ICP-OES) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP- OES) NS-EN 16171:2016 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i massespektrometri (ICP- MS) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) NS-EN 16175-1:2016 Slam, behandlet organisk avfall og jord - Bestemmelse av kvikksølv i kongevann- og salpetersyreblanding - Del 1: Kalddampatomabsorpsjonsspektrometri (CV-AAS) Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) NS-EN 16175-2:2016 Slam, behandlet organisk avfall og jord - Bestemmelse av kvikksølv - Del 2: Kalddampatomfluorescensspektrometri (CV-AFS) Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) NS-EN ISO 5667-6:2016 Vannundersøkelse - Prøvetaking - Del 6: Veiledning i prøvetaking fra elver og bekker (ISO 5667-6:2014) Water quality - Sampling - Part 6: Guidance on sampling of rivers and streams (ISO 5667-6:2014) NS-EN ISO 6385:2016 Ergonomiske prinsipper ved utforming av arbeidsprosesser (ISO 6385:2016) Ergonomics principles in the design of work systems (ISO 6385:2016) NS-EN ISO 14644-14:2016 Renrom og tilhørende kontrollerte omgivelser - Del 14: Vurdering av utstyrs egnethet basert på partikkelkonsentrasjon i luften (ISO 14644-14:2016) Cleanrooms and associated controlled environments - Part 14: Assessment of suitability for use of equipment by airborne particle concentration (ISO 14644-14:2016) Tilbaketrukne norske standarder NS-EN 13204:2004+A1:2012 Dobbeltvirkende hydraulisk redningsutstyr for brann- og redningsvesen - Krav til sikkerhet og ytelse Double acting hydraulic rescue tools for fire and rescue service use - Safety and performance requirements NS-EN 15269-5:2014 Utvidet bruk av resultater fra prøving av brannmotstand og røyktetthet av dører, porter, luker og åpningsbare vinduer, inklusive bygningsdelenes beslag - Del 5: Brannmotstand til hengslede dører og svingdører av glass med rammeverk av metall og åpningsbare vinduer Extended application of test results for fire resistance and/or smoke control for door, shutter and openable window assemblies, including their elements of building hardware - Part 5: Fire resistance of hinged and pivoted metal framed glazed doorsets and openable windows Listenummer: 1/2017 Side: 27 av 101