Annonseringsdato: 2016-10-12 Listenummer: 19/2016 Standardiseringsprosjekter og nye standarder Listenummer: 19/2016 Side: 1 av 116
01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 10318-1:2015/prA1 Geosynthetics - Part 1: Terms and definitions - Amendment 1 (ISO 10318-1:2015/DAmd 1:2016) Kommentarfrist: 2016.12.14 EN ISO 10318-2:2015/prA1 Geosynthetics - Part 2: Symbols and pictograms (ISO 10318-2:2015/DAM 1:2016) Kommentarfrist: 2016.12.14 EN ISO 17100:2015/prA1 Translation services - Requirements for translation services - Amendment 1 (ISO 17100:2015/DAmd 1:2016) Kommentarfrist: 2016.11.28 pren 736-1 Ventiler - Terminologi - Del 1: Definisjon av ventiltyper Valves - Terminology - Part 1: Definition of types of valves Kommentarfrist: 2016.10.27 pren 12216 Shutters, external blinds, internal blinds - Terminology, glossary and definitions Kommentarfrist: 2016.10.13 pren 12440 Naturstein - Kriterier for betegnelse Natural stone - Denomination criteria Kommentarfrist: 2016.10.20 pren 12665 Lys og belysning - Grunnleggende termer og kriterier for angivelse av krav til belysning Light and lighting - Basic terms and criteria for specifying lighting requirements Kommentarfrist: 2016.11.17 pren 12670 Natural stone - Terminology Kommentarfrist: 2016.10.20 pren ISO 52900 Additive manufacturing - General principles - Terminology (ISO/ASTM 52900:2015) Kommentarfrist: 2016.10.27 pren ISO/IEC 27000 Information technology - Security techniques - Information security management systems - Overview and vocabulary (ISO/IEC 27000:2016) Kommentarfrist: 2016.12.22 Listenummer: 19/2016 Side: 2 av 116
01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - internasjonale (ISO) ISO 10318-1:2015/DAmd 1 Kommentarfrist: 2016.12.13 ISO 10318-2:2015/DAmd 1 Kommentarfrist: 2016.12.13 ISO 17100:2015/DAmd 1 Kommentarfrist: 2016.11.27 ISO/DIS 4223-1 Definitions of some terms used in the tyre industry - Part 1: Pneumatic tyres (Revision of second edition (ISO 4223-1:1989) and its Amendment 1:1992 and draft Amendment 2) Kommentarfrist: 2016.11.21 ISO/DIS 9849 Optics and optical instruments - Geodetic and surveying instruments - Vocabulary [Revision of first edition (ISO 9849:1991)] Optics and optical instruments - Geodetic and surveying instruments - Vocabulary [Revision of first edition (ISO 9849:1991)] Kommentarfrist: 2016.12.12 ISO/DIS 11532 Aircraft ground equipment -- Graphical symbols Kommentarfrist: 2016.11.17 ISO/DIS 17755-2 Fire safety -- Statistical data collection -- Part 2: Definition of terms Kommentarfrist: 2016.10.23 ISO/DIS 21940-2 Mechanical vibration -- Rotor balancing -- Part 2: Vocabulary Kommentarfrist: 2016.11.27 ISO/DIS 29464 Renseutstyr for luft og andre gasser -- terminologi Cleaning equipment for air and other gases -- Terminology Kommentarfrist: 2016.10.23 ISO/DIS 29464 Cleaning of air and other gases -- Terminology Kommentarfrist: 2016.12.29 ISO/DIS 80000-2 Quantities and units -- Part 2: Mathematics Kommentarfrist: 2016.12.05 Listenummer: 19/2016 Side: 3 av 116
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 80000-10 Quantities and units -- Part 10: Atomic and nuclear physics Kommentarfrist: 2016.12.15 ISO-standarder ISO 1219-3:2016 Fluid power systems and components -- Graphical symbols and circuit diagrams -- Part 3: Symbol modules and connected symbols in circuit diagrams ISO 3767-1:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 1: Common symbols Erstatter A00008:20:022633,A00008:20:044053,A00008:20:054855 ISO 3767-2:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 2: Symbols for agricultural tractors and machinery Erstatter A00008:20:051188 ISO 3767-3:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 3: Symbols for powered lawn and garden equipment Erstatter A00008:20:009283 ISO 3767-4:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 4: Symbols for forestry machinery Erstatter A00008:20:009284,A00008:20:009285,A00008:20:044055 ISO 3767-5:2016 Tractors, machinery for agriculture and forestry, powered lawn and garden equipment -- Symbols for operator controls and other displays -- Part 5: Symbols for manual portable forestry machines Erstatter A00008:20:009286,A00008:20:009287 ISO 17987-6:2016 Road vehicles -- Local Interconnect Network (LIN) -- Part 6: Protocol conformance test specification ISO 30400:2016 Human resource management -- Vocabulary ISO/TR 22100-3:2016 Safety of machinery -- Relationship with ISO 12100 -- Part 3: Implementation of ergonomic principles in safety standards ISO/TS 11672:2016 Connectors for fluid power and general use -- Designation and nomenclature Listenummer: 19/2016 Side: 4 av 116
01 Generelt. Terminologi. Standardisering. Dokumentasjon Rapporter fra CEN (CR) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TS 15398:2016 Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element Resilient, textile and laminate floor coverings - Floor covering standard symbols - Complementary element CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings Fastsatte norske standarder NS-EN 13119:2016 Påhengsvegger - Terminologi Curtain walling - Terminology Tilbaketrukne norske standarder NS-EN ISO 14660-2:1999 Geometriske produktspesifikasjoner (GPS) - Geometriske elementer - Del 2: Ekstrahert median-linje til en sylinder eller konus, ekstrahert medianflate og lokal dimensjon til et ekstrahert element (ISO 14660-2:1999) Geometrical Product Specifications (GPS) - Geometric features - Part 2: Extracted median line of a cylinder and a cone, extracted median surface, local size of an extracted feature (ISO 14660-2:1999) Listenummer: 19/2016 Side: 5 av 116
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 14615 Posttjenester - Digitale frankeringsmerker - Applikasjoner, sikkerhet og utforming Postal services - Digital postage marks - Applications, security and design Kommentarfrist: 2016.10.27 pren ISO 15378 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO/DIS 15378:2016) Kommentarfrist: 2016.12.20 pren ISO/IEC 17011 Samsvarsvurdering - Krav til akkrediteringsorganer i forbindelse med akkreditering av organer for samsvarsvurdering (ISO/IEC DIS 17011:2016) Conformity assessment - Requirements for accreditation bodies accrediting conformity assessment bodies (ISO/IEC DIS 17011:2016) Kommentarfrist: 2016.11.10 Standardforslag til høring - internasjonale (ISO) ISO/DIS 10007 Quality management systems -- Guidelines for configuration management Kommentarfrist: 2016.11.05 ISO/DIS 11000.2 Collaborative business relationship management systems -- Framework Kommentarfrist: 2016.10.30 ISO/DIS 14813-6 Transport information and control systems -- Reference model architecture(s) for the TICS sector -- Part 6: Data presentation in ASN.1 Kommentarfrist: 2016.11.22 ISO/DIS 14813-6 Intelligent transport systems -- Reference model architecture(s) for the ITS sector -- Part 6: Data presentation in ASN.1 Kommentarfrist: 2017.01.28 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: 2016.12.19 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) Kommentarfrist: 2017.02.24 Listenummer: 19/2016 Side: 6 av 116
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 16461 Intelligent transport systems -- Criteria for privacy and integrity protection Kommentarfrist: 2016.12.19 ISO/DIS 19237 Intelligent transport systems -- Pedestrian detection and collision mitigation systems (PDCMS) -- Performance requirements and test procedures Kommentarfrist: 2016.11.22 ISO/DIS 34001.4 Security and resilience -- Security management system for organizations assuring authenticity, integrity and trust for products and documents Kommentarfrist: 2016.10.27 ISO-standarder ISO 17679:2016 Tourism and related services -- Wellness spa -- Service requirements ISO 30400:2016 Human resource management -- Vocabulary ISO 30409:2016 Human resource management -- Workforce planning ISO/TS 16460:2016 Intelligent transport systems -- Communications access for land mobiles (CALM) -- Communication protocol messages for global usage ISO/TS 21219-16:2016 Intelligent transport systems -- Traffic and travel information via transport protocol exports group, generation 2 (TPEG2) -- Part 16: Fuel price information and availability (TPEG2-FPI) CEN Workshop Agreements CWA 17056:2016 Safepost - Postal supply chain security - Standardization needs Rapporter fra CEN (CR) CEN ISO/TS 19299:2015 Electronic fee collection - Security framework (ISO/TS 19299:2015) CEN ISO/TR 17424:2015 Intelligent transport systems - Cooperative systems - State of the art of Local Dynamic Maps concepts (ISO/TR 17424:2015) Listenummer: 19/2016 Side: 7 av 116
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17425:2016 Intelligent transport systems - Cooperative systems - Data exchange specification for in-vehicle presentation of external road and traffic related data (ISO/TS 17425:2016) CEN ISO/TS 17426:2016 Intelligent transport systems - Cooperative systems - Contextual speeds (ISO/TS 17426:2016) CEN ISO/TS 17969:2015 Petroleum, petrochemical and natural gas industries - Guidelines on competency for personnel (ISO/TS 17969:2015) CEN ISO/TS 18750:2015 Intelligent transport systems - Cooperative systems - Definition of a global concept for Local Dynamic Maps (ISO/TS 18750:2015) CEN/TR 15367-1:2014 Petroleumsprodukter - Retningslinjer for god drivstofføkonomi - Del 1: Diesel Petroleum products - Guidelines for good housekeeping - Part 1: Automotive diesel fuels CEN/TR 16797-1:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 1: Principles and rules of application CEN/TR 16797-2:2015 Construction products: Assessment of release of dangerous substances - Guidance on the statistical assessment of declared values - Part 2: Technical and statistical background CEN/TR 16862:2015 Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence Plastics welding supervisor - Task, responsibilities, knowledge, skills and competence CEN/TR 16894:2015 Posttjenester - Leveringskvalitet: Ettersending Postal services - Quality of delivery: Reforwarding CEN/TR 16915:2015 Postal Services - Quality of service - Damage to postal items Postal Services - Quality of service - Damage to postal items CEN/TS 14014:2015 Postal services - Hybrid mail - XML definition of encapsulation of letters for automated postal handling CEN/TS 15448:2014 Postal services - Open standard interface between image controller and enrichment devices (OCRs, video coding systems, voting systems) Listenummer: 19/2016 Side: 8 av 116
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 15472:2016 Postal services - Method for measurement of parcel transit time for cross-border parcels within the European Union and EFTA using Tracking and Tracing CEN/TS 16555-2:2014 Innovation management - Part 2: Strategic intelligence management CEN/TS 16555-3:2014 Innovation management - Part 3: Innovation thinking CEN/TS 16555-4:2014 Innovation management - Part 4: Intellectual property management CEN/TS 16555-5:2014 Innovation management - Part 5: Collaboration management CEN/TS 16555-6:2014 Innovation management - Part 6: Creativity management CEN/TS 16555-7:2015 Innovation management - Part 7: Innovation Management Assessment Innovation management - Part 7: Innovation Management Assessment CEN/TS 16702-2:2015 Electronic fee collection - Secure monitoring for autonomous toll systems - Part 2: Trusted recorder CEN/TS 16735:2015 Postal services - Extensible Common Structure and Representation for Postal Rates - EPR CEN/TS 16819:2015 Postal services - Parcel boxes for end use - Technical features CEN/TS 16880:2015 Service excellence - Creating outstanding customer experiences through service excellence CEN/TS 16919:2016 Postal services - Interface and data transfer format for capturing postal automation events IDT-PAE CEN/TS 419261:2015 Security requirements for trustworthy systems managing certificates and time-stamps Listenummer: 19/2016 Side: 9 av 116
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Fastsatte norske standarder NS-EN 9104-002:2016 Aerospace series - Quality management systems - Part 002: Requirements for Oversight of Aerospace Quality Management System Registration/Certification Programs 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) EN ISO 11133:2014/prA1 Fôr-, vann- og næringsmiddelmikrobiologi - Forberedelse, produksjon, lagring og ytelsesprøving av dyrkningsmedier Microbiology of food, animal feed and water - Preparation, production, storage and performance testing of culture media - Amendment 1 (ISO 11133:2014/DAmd 1:2016) Kommentarfrist: 2016.12.07 pren ISO 11737-1 Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product (ISO/DIS 11737-1:2016) Kommentarfrist: 2016.12.14 pren ISO 19020 Microbiology of food chain - Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO/DIS 19020:2016) Kommentarfrist: 2016.11.02 pren ISO 20976-1 Microbiology of the food chain - Guidelines for conducting challenge tests of food and feed products - Part 1: Challenge tests to study the growth potential, lag time and the maximum growth rate (ISO/DIS 20976-1:2016) Kommentarfrist: 2016.10.26 Standardforslag til høring - internasjonale (ISO) ISO 11133:2014/DAmd 1 Kommentarfrist: 2016.12.06 ISO/DIS 11737-1 Sterilization of health care products -- Microbiological methods -- Part 1: Determination of a population of microorganisms on product Kommentarfrist: 2017.02.18 ISO/DIS 11737-1 Sterilization of medical devices - Microbiological methods - Part 1: Estimation of population of microorganisms on products Kommentarfrist: 2016.12.13 ISO/DIS 19020 Microbiology of food chain -- Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs Kommentarfrist: 2016.11.01 Listenummer: 19/2016 Side: 10 av 116
07 Matematikk. Naturvitenskap ISO/DIS 20976-1 Microbiology of the food chain -- Guidelines for conducting challenge tests of food and feed products -- Part 1: Challenge tests to study the growth potential, lag time and the maximum growth rate Kommentarfrist: 2016.10.25 ISO-standarder ISO/TR 16196:2016 Nanotechnologies -- Compilation and description of sample preparation and dosing methods for engineered and manufactured nanomaterials Rapporter fra CEN (CR) CEN ISO/TS 18867:2015 Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of pathogenic Yersinia enterocolitica and Yersinia pseudotuberculosis (ISO/DTS 18867:2015) CEN ISO/TS 80004-1:2014 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2010) CEN ISO/TS 80004-3:2014 Nanotechnologies - Vocabulary - Part 3: Carbon nano-objects (ISO/TS 80004-3:2010) CEN ISO/TS 80004-4:2014 Nanotechnologies - Vocabulary - Part 4: Nanostructured materials (ISO/TS 80004-4:2011) CEN ISO/TR 19838:2016 Microbiology - Cosmetics - Guidelines for the application of ISO standards on Cosmetic Microbiology (ISO/TR 19838:2016) CEN ISO/TS 12025:2015 Nanomaterials - Quantification of nano-object release from powders by generation of aerosols (ISO/TS 12025:2012) CEN ISO/TS 17200:2015 Nanotechnology - Nanoparticles in powder form - Characteristics and measurements (ISO/TS 17200:2013) CEN ISO/TS 17728:2015 Fôr- og næringsmiddelmikrobiologi Prøvetakingsteknikker for mikrobiologisk analyse av mat og fôr prøver (ISO/DTS 17728:2014) Microbiology of the food chain - Sampling techniques for microbiological analysis of food and feed samples (ISO/TS 17728:2015) CEN ISO/TS 80004-1:2015 Nanotechnologies - Vocabulary - Part 1: Core terms (ISO/TS 80004-1:2015) CEN ISO/TS 80004-6:2015 Nanotechnologies - Vocabulary - Part 6: Nano-object characterization (ISO/TS 80004-6:2013) Listenummer: 19/2016 Side: 11 av 116
07 Matematikk. Naturvitenskap CEN ISO/TS 80004-8:2015 Nanotechnologies - Vocabulary - Part 8: Nanomanufacturing processes (ISO/TS 80004-8:2013) CEN/TR 15449-5:2015 Geographic information - Spatial data infrastructures - Part 5: Validation and testing CEN/TS 15634-3:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 3: Hazelnut (Corylus avellana) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 15634-4:2016 Matvarer Bestemmelse av allergener i mat ved molekylærbiologisk metode Del 4 Peanøtt (Arachis hypogaea) Kvalitativ bestemmelse av en spesifikk DNA sekvens i sjokolade ved sanntids PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 4: Peanut (Arachis hypogaea) - Qualitative detection of a specific DNA sequence in chocolate by real-time PCR CEN/TS 15634-5:2016 Foodstuffs - Detection of food allergens by molecular biological methods - Part 5: Mustard (Sinapis alba) and soya (Glycine max) - Qualitative detection of a specific DNA sequence in cooked sausages by real-time PCR CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16937:2016 Nanotechnologies - Guidance for the responsible development of nanotechnologies Fastsatte norske standarder NS-EN ISO 16140-1:2016 Fôr- og næringsmiddelmikrobiologi - Metodevalidering - Del 1: Ordliste (ISO 16140-1:2016) Microbiology of the food chain - Method validation - Part 1: Vocabulary (ISO 16140-1:2016) NS-EN ISO 16140-2:2016 Fôr- og næringsmiddelmikrobiologi - Metodevalidering - Del 2: Protokoll for validering av alternative (proprietære) metoder mot referansemetoder (ISO 16140-2:2016) Microbiology of the food chain - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO 16140-2:2016) NS-EN ISO 17468:2016 Fôr- og næringsmiddelmikrobiologi - Tekniske krav og veiledning for etablering eller revisjon av standardmetoder (ISO 17468:2016) Microbiology of the food chain - Technical requirements and guidance on establishment or revision of a standardized reference method (ISO 17468:2016) Listenummer: 19/2016 Side: 12 av 116
07 Matematikk. Naturvitenskap Tilbaketrukne norske standarder NS-EN ISO 16140:2003 Fôr- og næringsmiddelmikrobiologi - Veileder for validering av alternative metoder (ISO 16140:2003) Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods (ISO 16140:2003) NS-EN ISO 16140:2003/A1:2011 Endringsblad A1 - Fôr- og næringsmiddelmikrobiologi - Veileder for validering av alternative metoder (ISO 16140:2003/Amd 1:2011) Amendment A1 - Microbiology of food and animal feeding stuffs - Protocol for the validation of alternative methods (ISO 16140:2003/Amd 1:2011) 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) pren ISO 9170-1 Ut- og inntaksposter i medisinske sentralgassanlegg - Del 1: Uttaksposter for komprimerte medisinske gasser og inntaksposter for vakuum (ISO/DIS 9170-1:2016) Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum (ISO/DIS 9170-1:2016) Kommentarfrist: 2016.10.26 pren ISO 11737-1 Sterilization of health care products - Microbiological methods - Part 1: Determination of a population of microorganisms on product (ISO/DIS 11737-1:2016) Kommentarfrist: 2016.12.14 pren ISO 15378 Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) (ISO/DIS 15378:2016) Kommentarfrist: 2016.12.20 pren ISO 80601-2-55 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO/DIS 80601-2-55:2016) Kommentarfrist: 2016.12.16 Standardforslag til høring - internasjonale (ISO) ISO/DIS 9170-1 Terminal units for medical gas pipeline systems - Part 1: Terminal units for use with compressed medical gases and vacuum Kommentarfrist: 2016.10.25 ISO/DIS 10936-1 Optics and optical instruments - Operation microscopes - Part 1: Requirements and test methods Kommentarfrist: 2016.10.26 Listenummer: 19/2016 Side: 13 av 116
11 Helsevesen, Teknikk ISO/DIS 11195 Gas mixers for medical use Kommentarfrist: 2016.12.13 ISO/DIS 11195 Gas mixers for medical use -- Stand-alone gas mixers Kommentarfrist: 2017.02.18 ISO/DIS 11737-1 Sterilization of health care products -- Microbiological methods -- Part 1: Determination of a population of microorganisms on product Kommentarfrist: 2017.02.18 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: 2016.12.19 ISO/DIS 15378 Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP) Kommentarfrist: 2017.02.24 ISO/DIS 16038 Rubber condoms -- Guidance on the use of ISO 4074 in the quality management of natural rubber latex condoms Kommentarfrist: 2016.12.04 ISO/DIS 20789 Anaesthetic and respiratory equipment -- Passive humidifiers Kommentarfrist: 2016.12.05 ISO/DIS 25841.2 Female condoms -- Requirements and test methods Kommentarfrist: 2016.10.17 ISO/DIS 80601-2-55 Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors Kommentarfrist: 2017.02.20 ISO/DIS 80601-2-55 Medical electrical equipment -- Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors Kommentarfrist: 2016.12.15 Listenummer: 19/2016 Side: 14 av 116
11 Helsevesen, Teknikk ISO-standarder ISO 5361:2016 Anaesthetic and respiratory equipment -- Tracheal tubes and connectors Erstatter A00008:20:054561 ISO 5364:2016 Anaesthetic and respiratory equipment -- Oropharyngeal airways Erstatter A00008:20:050928 ISO 5366:2016 Anaesthetic and respiratory equipment -- Tracheostomy tubes and connectors Erstatter A00008:20:059781,A00008:20:059782 ISO 5832-3:2016 Implants for surgery -- Metallic materials -- Part 3: Wrought titanium 6-aluminium 4-vanadium alloy Erstatter A00008:20:023049 ISO 7153-1:2016 Surgical instruments -- Materials -- Part 1: Metals Erstatter A00008:20:013749,A00008:20:023266 ISO 7206-2:2011/Amd 1:2016 ISO 7206-12:2016 Implants for surgery -- Partial and total hip joint prostheses -- Part 12: Deformation test method for acetabular shells ISO 7207-2:2011/Amd 1:2016 ISO 10938:2016 Ophthalmic optics -- Chart displays for visual acuity measurement -- Printed, projected and electronic Erstatter A00008:20:018914 ISO 11381:2016 Ophthalmic optics -- Spectacle frames -- Screw threads Erstatter A00008:20:002440 ISO 14242-2:2016 Implants for surgery -- Wear of total hip-joint prostheses -- Part 2: Methods of measurement Erstatter A00008:20:025376 ISO 14243-2:2016 Implants for surgery -- Wear of total knee-joint prostheses -- Part 2: Methods of measurement Erstatter A00008:20:044263 Listenummer: 19/2016 Side: 15 av 116
11 Helsevesen, Teknikk ISO 15674:2016 Cardiovascular implants and artificial organs -- Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags Erstatter A00008:20:051031 ISO 15675:2016 Cardiovascular implants and artificial organs -- Cardiopulmonary bypass systems -- Arterial blood line filters Erstatter A00008:20:051032 ISO 15676:2016 Cardiovascular implants and artificial organs -- Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO) Erstatter A00008:20:040142 ISO 18241:2016 Cardiovascular implants and extracorporeal systems -- Cardiopulmonary bypass systems -- Venous bubble traps ISO 18242:2016 Cardiovascular implants and extracorporeal systems -- Centrifugal blood pumps ISO/TR 19024:2016 Evaluation of CPB devices relative to their capabilities of reducing the transmission of gaseous microemboli (GME) to a patient during cardiopulmonary bypass Rapporter fra CEN (CR) CEN/TR 16824:2015 Early care services for babies born with cleft lip and/or palate CEN/TS 14237:2015 Textiles for healthcare and social services facilities CEN/TS 16826-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 1: Isolated RNA CEN/TS 16826-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for snap frozen tissue - Part 2: Isolated proteins CEN/TS 16827-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 1: Isolated RNA CEN/TS 16827-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 2: Isolated proteins Listenummer: 19/2016 Side: 16 av 116
11 Helsevesen, Teknikk CEN/TS 16827-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for FFPE tissue - Part 3: Isolated DNA CEN/TS 16835-1:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 1: Isolated cellular RNA CEN/TS 16835-2:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 2: Isolated genomic DNA CEN/TS 16835-3:2015 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for venous whole blood - Part 3: Isolated circulating cell free DNA from plasma CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16945:2016 Molecular in vitro diagnostic examinations - Specifications for pre-examination processes for metabolomics in urine, venous blood serum and plasma Fastsatte norske standarder NS-EN ISO 10139-2:2016 Tannpleie - Myke fôringsmaterialer til avtakbare proteser - Del 2: Materialer for langtidsbruk (ISO 10139-2:2016) Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2016) NS-EN ISO 10328:2016 Proteser - Strukturell prøving av underekstremitetsproteser - Krav og prøvingsmetoder (ISO 10328:2016) Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2016) NS-EN ISO 22675:2016 Proteser - Prøving av hjelpemidler for ankel og fot og av fotkomponenter - Krav og prøvingsmetoder (ISO 22675:2016) Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2016) Tilbaketrukne norske standarder NS-EN ISO 10139-2:2009 Tannpleie - Myke foringsmaterialer til avtakbare proteser - Del 2: Materialer for langtidsbruk (ISO 10139-2:2009) Dentistry - Soft lining materials for removable dentures - Part 2: Materials for long-term use (ISO 10139-2:2009) Listenummer: 19/2016 Side: 17 av 116
11 Helsevesen, Teknikk NS-EN ISO 10328:2006 Proteser - Strukturell prøving av underekstremitetsproteser - Krav og prøvingsmetoder (ISO 10328:2006) Prosthetics - Structural testing of lower-limb prostheses - Requirements and test methods (ISO 10328:2006) NS-EN ISO 22675:2006 Proteser - Prøving av hjelpemidler for ankel og fot og av fotkomponenter - Krav og prøvingsmetoder (ISO 22675:2006) Prosthetics - Testing of ankle-foot devices and foot units - Requirements and test methods (ISO 22675:2006) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - nasjonale prns 3926-1 Visuelle ledesystemer for rømning i byggverk - Del 1: Planlegging og utforming Visual safety way guidance systems (SWGS) in buildings - Part 1:Planning and design Språk: no Kommentarfrist: 2016.10.24 prns 9433 Turbiditetsovervåking av tiltak i vannforekomster Turbidity survey of measures in water bodies Språk: no Kommentarfrist: 2016.10.15 Standardforslag til høring - europeiske (CEN) pren 12285-1 Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids other than for heating and cooling of buildings Kommentarfrist: 2016.12.01 pren 12285-3 Workshop fabricated steel tanks - Part 3: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids for heating and cooling of buildings Kommentarfrist: 2016.12.01 pren 12574-4 Stationary waste containers - Part 4: Waste-Mechatronics Kommentarfrist: 2016.11.17 pren 12574-4 Stationary waste containers - Part 4: Waste-Mechatronics Kommentarfrist: 2016.11.17 pren 13277-8 Protective equipment for martial arts - Part 8: Additional requirements and test methods for karate face protectors Kommentarfrist: 2016.11.03 Listenummer: 19/2016 Side: 18 av 116
13 Miljøvern. Helsevern. Sikkerhet pren 13565-1 Faste brannslokkesystemer - Skumsystemer - Del 1: Krav og prøvingsmetoder for komponenter Fixed firefighting systems - Foam systems - Part 1: Requirements and test methods for components Kommentarfrist: 2016.10.13 pren 13565-2 Faste brannslokkesystemer - Skumsystemer - Del 2: Planlegging, utførelse og vedlikehold Fixed firefighting systems - Foam systems - Part 2: Design, construction and maintenance Kommentarfrist: 2016.10.13 pren 14458 Personal eye-equipment - High performance visors intended only for use with protective helmets Kommentarfrist: 2016.11.11 pren 15004-1 Fixed firefighting systems - Gas extinguishing systems - Part 1: Design, installation and maintenance (ISO 14520-1:2015, modified) Kommentarfrist: 2016.10.20 pren 15004-7 Fixed firefighting systems - Gas extinguishing systems - Part 7: Physical properties and system design of gas extinguishing systems for IG-01 extinguishant (ISO 14520-12:2015, modified) Kommentarfrist: 2016.10.20 pren 15004-8 Fixed firefighting systems - Gas extinguishing systems - Part 8: Physical properties and system design of gas extinguishing systems for IG-100 extinguishant (ISO 14520-13:2015, modified) Kommentarfrist: 2016.10.20 pren 15004-9 Fixed firefighting system - Gas extinguishing systems - Part 9: Physical properties and system design of gas extinguishing systems for IG-55 extinguishant (ISO 14520-14:2015, modified) Kommentarfrist: 2016.10.20 pren 15004-10 Fixed firefighting systems - Gas extinguishing systems - Part 10: Physical properties and system design of gas extinguishing systems for IG-541 (ISO 14520-15:2015, modified) Kommentarfrist: 2016.10.20 pren 16785-2 Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method Kommentarfrist: 2016.12.15 pren 16785-2 Bio-based products - Bio-based content - Part 2: Determination of the bio-based content using the material balance method Kommentarfrist: 2016.12.15 Listenummer: 19/2016 Side: 19 av 116
13 Miljøvern. Helsevern. Sikkerhet pren ISO 9241-392 Ergonomics of human-system interaction - Part 392: Ergonomic recommendations for the reduction of visual fatigue from stereoscopic images (ISO 9241-392:2015) Kommentarfrist: 2016.10.21 pren ISO 17892-7 Geotechnical investigation and testing - Laboratory testing of soil - Part 7: Unconfined compression test (ISO/DIS 17892-7:2016) Kommentarfrist: 2016.12.14 pren ISO 17892-8 Geotechnical investigation and testing - Laboratory testing of soil - Part 8: Unconsolidated undrained triaxial test (ISO/DIS 17892-8:2016) Kommentarfrist: 2016.12.14 pren ISO 17892-9 Geotechnical investigation and testing - Laboratory testing of soil - Part 9: Consolidated triaxial compression tests on water saturated soils (ISO/DIS 17892-9:2016) Kommentarfrist: 2016.12.14 pren ISO 19085-6 Woodworking machines - Safety - Part 6: Single spindle vertical moulding machines ("toupies") (ISO/DIS 19085-6:2016) Kommentarfrist: 2016.11.09 pren ISO 19085-8 Woodworking machines - Safety - Part 8: Wide-belt calibrating and sanding machines (ISO/DIS 19085-8:2016) Kommentarfrist: 2016.10.19 pren ISO 19918 Protective clothing - Protection against chemicals - Measurement of cumulative permeation of chemicals with low vapour pressure through materials (ISO/DIS 19918:2016) Kommentarfrist: 2016.11.01 Standardforslag til høring - internasjonale (ISO) ISO/DIS 7240-2 Fire detection and alarm systems -- Part 2: Control and indicating equipment Kommentarfrist: 2016.11.17 ISO/DIS 7240-4 Fire detection and alarm systems -- Part 4: Power supply equipment Kommentarfrist: 2016.11.17 ISO/DIS 9241-940.3 Ergonomics of human-system interaction -- Part 940: Evaluation of tactile and haptic interactions Kommentarfrist: 2016.10.25 Listenummer: 19/2016 Side: 20 av 116
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 14118 Safety of machinery -- Prevention of unexpected start-up Kommentarfrist: 2016.10.15 ISO/DIS 17755-2 Fire safety -- Statistical data collection -- Part 2: Definition of terms Kommentarfrist: 2016.10.23 ISO/DIS 17892-7 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 7: Unconfined compression test Kommentarfrist: 2016.12.13 ISO/DIS 17892-8 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 8: Unconsolidated undrained triaxial test Kommentarfrist: 2016.12.13 ISO/DIS 17892-9 Geotechnical investigation and testing -- Laboratory testing of soil -- Part 9: Consolidated triaxial compression tests on water saturated soils Kommentarfrist: 2016.12.13 ISO/DIS 17924 Soil quality -- Assessment of human exposure from ingestion of soil and soil material -- Procedure for the estimation of the human bioaccessibility/bioavailability of metals in soil Kommentarfrist: 2016.11.05 ISO/DIS 18400-104 Soil quality -- Sampling -- Part 104: Strategies Kommentarfrist: 2016.12.21 ISO/DIS 19087 Workplace air -- Analysis of respirable crystalline silica by Fourier-Transform Infrared spectroscopy Kommentarfrist: 2016.11.06 ISO/DIS 19703 Generation and analysis of toxic gases in fire -- Calculation of species yields, equivalence ratios and combustion efficiency in experimental fires Kommentarfrist: 2016.12.05 ISO/DIS 19891-1 Ships and marine technology -- Specifications for gas detectors intended for use on board ships -- Part 1: Portable gas detectors for atmosphere testing of enclosed spaces Kommentarfrist: 2016.11.21 ISO/DIS 19918 Protective clothing -- Protection against chemicals -- Measurement of cumulative permeation of chemicals with low vapour pressure through materials Kommentarfrist: 2016.10.31 Listenummer: 19/2016 Side: 21 av 116
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 20295 Soil quality -- Determination of perchlorate in soil using ion chromatography Kommentarfrist: 2016.12.06 ISO/DIS 27917-1 Carbon dioxide capture, transportation and geological storage -- Vocabulary -- Part 1: Cross-cutting terms Kommentarfrist: 2016.10.17 ISO/DIS 37154 Smart community infrastructures -- Best practice guidelines for transportation Kommentarfrist: 2016.12.19 ISO-standarder ISO 13577-1:2016 Industrial furnaces and associated processing equipment -- Safety -- Part 1: General requirements Erstatter A00008:20:054032 ISO 13577-3:2016 Industrial furnaces and associated processing equipment -- Safety -- Part 3: Generation and use of protective and reactive atmosphere gases ISO 14520-2:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 2: CF3I extinguishant Erstatter A00008:20:039788 ISO 14520-5:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 5: FK-5-1-12 extinguishant Erstatter A00008:20:039798 ISO 14520-6:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 6: HCFC Blend A extinguishant Erstatter A00008:20:039789 ISO 14520-8:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 8: HFC 125 extinguishant Erstatter A00008:20:039790 ISO 14520-9:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 9: HFC 227ea extinguishant Erstatter A00008:20:039791 ISO 14520-10:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 10: HFC 23 extinguishant Erstatter A00008:20:039792 Listenummer: 19/2016 Side: 22 av 116
13 Miljøvern. Helsevern. Sikkerhet ISO 14520-11:2016 Gaseous fire-extinguishing systems -- Physical properties and system design -- Part 11: HFC 236fa extinguishant Erstatter A00008:20:039793 ISO 22262-3:2016 Air quality -- Bulk materials -- Part 3: Quantitative determination of asbestos by X-ray diffraction method ISO/TR 14073:2016 Environmental management -- Water footprint -- Illustrative examples on how to apply ISO 14046 ISO/TR 22100-3:2016 Safety of machinery -- Relationship with ISO 12100 -- Part 3: Implementation of ergonomic principles in safety standards ISO/TS 19700:2016 Controlled equivalence ratio method for the determination of hazardous components of fire effluents -- Steady-state tube furnace Erstatter A00008:20:043192 ISO/TS 21144:2016 Ergonomics of human-system interaction -- Electronic paper display -- Indoor use Rapporter fra CEN (CR) CEN ISO/TS 29843-1:2014 Soil quality - Determination of soil microbial diversity - Part 1: Method by phospholipid fatty acid analysis (PLFA) and phospholipid ether lipids (PLEL) analysis (ISO/TS 29843-1:2010) CEN ISO/TR 9241-308:2015 Ergonomics of human-system interaction - Part 308: Surface-conduction electron-emitter displays (SED) (ISO/TR 9241-308:2008) CEN ISO/TR 9241-309:2015 Ergonomics of human-system interaction - Part 309: Organic light-emitting diode (OLED) displays (ISO/TR 9241-309:2008) CEN ISO/TR 9241-310:2015 Ergonomics of human-system interaction - Part 310: Visibility, aesthetics and ergonomics of pixel defects (ISO/TR 9241-310:2010) CEN ISO/TS 9241-411:2014 Ergonomics of human-system interaction - Part 411: Evaluation methods for the design of physical input devices (ISO/TS 9241-411:2012) CEN ISO/TS 14071:2016 Environmental management - Life cycle assessment - Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 (ISO/TS 14071:2014) CEN ISO/TS 16558-2:2015 Soil quality - Risk-based petroleum hydrocarbons - Part 2: Determination of aliphatic and aromatic fractions of semi-volatile petroleum hydrocarbons using gas chromatography with flame ionization detection (GC/FID) (ISO/TS 16558-2:2015) Listenummer: 19/2016 Side: 23 av 116
13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TS 29843-2:2014 Soil quality - Determination of soil microbial diversity - Part 2: Method by phospholipid fatty acid analysis (PLFA) using the simple PLFA extraction method (ISO/TS 29843-2:2011, Corrected version 2012-02-01) CEN/TR 1030-2:2016 Hand-arm vibration - Guidelines for vibration hazards reduction - Part 2: Management measures at the workplace CEN/TR 16394:2014 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16394:2014/AC:2015 Characterization of sludges - Protocol for preparing synthetic suspensions CEN/TR 16710-1:2015 Ergonomics methods Part 1: Feedback method - A method to understand how end users perform their work with machines Ergonomics methods - Part 1: Feedback method - A method to understand how end users perform their work with machines CEN/TR 16788:2014 Characterization of sludges - Guideline of good practice for thermal processes CEN/TR 16793:2016 Veiledning for valg, anvendelse og bruk av flammefeller Guide for the selection, application and use of flame arresters CEN/TR 16823:2015 Railway applications - Driver's cab - Background information on anthropometric data CEN/TR 16829:2016 Forebyggelse av og vern mot eksplosjon og brann for koppelevatorer Fire and explosion prevention and protection for bucket elevators CEN/TR 16832:2015 Selection, use, care and maintenance of personal protective equipment for preventing electrostatic risks in hazardous areas (explosion risks) CEN/TR 16928:2016 Guidance for the implementation of environmental aspects in product standards and system standards in the field of wastewater engineering CEN/TR 16949:2016 Road restraint system - Pedestrian restraint system - Pedestrian parapets CEN/TR 16957:2016 Bio-based products - Guidelines for Life Cycle Inventory (LCI) for the End-of-life phase Listenummer: 19/2016 Side: 24 av 116
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 54-32:2015 Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems Fire detection and fire alarm systems - Part 32: Planning, design, installation, commissioning, use and maintenance of voice alarm systems CEN/TS 1948-5:2015 Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs CEN/TS 13649:2014 Utslipp fra stasjonære kilder - Bestemmelse av massekonsentrasjonen av gassformige organiske enkeltforbindelser - Metode basert på adsorpsjon på aktivt kull og løsemiddeldesorpsjon Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Sorptive sampling method followed by solvent extraction or thermal desorption CEN/TS 15864:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med kontinuerlig fornyelse av utlekkingsvæske under betingelser relevant for spesifiserte scenario(er) Characterization of waste - Leaching behaviour test for basic characterization - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) CEN/TS 15989:2015 Firefighting and rescue service vehicles and equipment - Graphical symbols for control elements and displays and for markings CEN/TS 16637-1:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 1: Veiledning i bestemmelse av utlekkingsprøvinger og trinn for tilleggsprøvinger Construction products - Assessment of release of dangerous substances - Part 1: Guidance for the determination of leaching tests and additional testing steps CEN/TS 16637-2:2014 Byggevarer - Vurdering av frigjøring av farlige stoffer - Del 2: Horisontal dynamisk overflateutlekkingsprøving Construction products - Assessment of release of dangerous substances - Part 2: Horizontal dynamic surface leaching test CEN/TS 16637-3:2016 Construction products - Assessment of release of dangerous substances - Part 3: Horizontal up-flow percolation test CEN/TS 16660:2015 Karakterisering av avfall - Prøving av utlekkingsegenskaper Bestemmelse av den reduserende egenskapen og den reduserende kapasiteten Characterization of waste - Leaching behaviour test - Determination of the reducing character and the reducing capacity CEN/TS 16675:2014 Characterisation of waste - Test methods for the determination of the monolithic status of waste Listenummer: 19/2016 Side: 25 av 116
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16692:2015 Vannundersøkelse - Bestemmelse av tributyltinn (TBT) i totale vannprøver - Metode med fastfaseekstraksjon (SPE) med SPEplater og gasskromatografi med trippel kvadrupol-massespektrometri (GC-MS/MS) Water quality - Determination of tributyltin (TBT) in whole water samples - Method using solid phase extraction (SPE) with SPE disks and gas chromatography with triple quadrupole mass spectrometry CEN/TS 16800:2015 Guideline for the validation of physico-chemical analytical methods CEN/TS 16811-3:2015 Winter service equipment and products - De-icing agents - Part 3: Other solid and liquid de-icing agents - Requirements and test methods CEN/TS 16817-1:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 1: Technical pollen sampling using pollen mass filter (PMF) and Sigma-2-sampler CEN/TS 16817-2:2015 Ambient air - Monitoring the effects of genetically modified organisms (GMO) - Pollen monitoring - Part 2: Biological pollen sampling using bee colonies CEN/TS 16822:2015 Textiles and textile products - Self-declared environmental claims - Use of the terms CEN/TS 16850:2015 Societal and Citizen Security - Guidance for managing security in healthcare facilities CEN/TS 16861:2015 Plastics - Recycled plastics - Determination of selected marker compounds in food grade recycled polyethylene terephthalate (PET) CEN/TS 16868:2015 Ambient air - Sampling and analysis of airborne pollen grains and fungal spores for allergy networks - Volumetric Hirst method CEN/TS 16916:2016 Materials obtained from End of Life Tyres - Determination of specific requirements for sampling and determination of moisture content using the oven-dry method CEN/TS 16976:2016 Ambient air - Determination of the particle number concentration of atmospheric aerosol Fastsatte norske standarder NS 5834:2016 Samfunnssikkerhet - Beskyttelse mot tilsiktede uønskede handlinger - Planlegging av sikringstiltak i bygg, anlegg og eiendom Societal security - Protection against intentional undesirable actions - Planning of security measures in the built environment Språk: no Listenummer: 19/2016 Side: 26 av 116
13 Miljøvern. Helsevern. Sikkerhet NS-EN 1073-1:2016/AC:2016 Rettelsesblad AC - Vernetøy mot faste luftbårne partikler, inkludert radioaktiv forurensning - Del 1: Krav og prøvingsmetoder for trykkluftventilert vernetøy som beskytter kroppen og luftveiene Corrigendum AC - Protective clothing against solid airborne particles including radioactive contamination - Part 1: Requirements and test methods for compressed air line ventilated protective clothing, protecting the body and the respiratory tract NS-EN 13501-2:2016 Brannklassifisering av byggevarer og bygningsdeler - Del 2: Klassifisering ved bruk av resultater fra brannmotstandsprøving, unntatt ventilasjonssystemer Fire classification of construction products and building elements - Part 2: Classification using data from fire resistance tests, excluding ventilation services NS-EN 13501-4:2016 Brannklassifisering av byggevarer og bygningsdeler - Del 4: Klassifisering ved bruk av data fra brannmotstandsprøving av komponenter i røykkontrollsystemer Fire classification of construction products and building elements - Part 4: Classification using data from fire resistance tests on components of smoke control systems NS-EN 13501-5:2016 Brannklassifisering av byggevarer og bygningsdeler - Del 5: Klassifisering ved bruk av resultater fra prøving av tak utsatt for utvendig branneksponering Fire classification of construction products and building elements - Part 5: Classification using data from external fire exposure to roofs tests NS-EN 14025:2013+A1:2016 Tanker for transport av farlig gods - Metalliske trykktanker - Konstruksjon og tilvirkning Tanks for the transport of dangerous goods - Metallic pressure tanks - Design and construction NS-EN 16657:2016 Tanker for transport av farlig gods - Transporttankutstyr for overfyllingsvern for stasjonære tanker Tanks for the transport of dangerous goods - Transport tank equipment for overfill prevention devices for static tanks NS-EN 19694-1:2016 Utslipp fra stasjonære kilder - Bestemmelse av klimagassutslipp fra energiintensiv industri - Del 1: Generelle aspekter Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects NS-EN 19694-2:2016 Utslipp fra stasjonære kilder - Bestemmelse av klimagassutslipp fra energiintensiv industri - Del 2: Jern- og stålindustri Stationary source emissions - Greenhouse Gas (GHG) emissions in energy-intensive industries - Part 2: Iron and steel industry NS-EN 19694-3:2016 Utslipp fra stasjonære kilder - Bestemmelse av klimagassutslipp fra energiintensiv industri - Del 3: Sementindustri Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 3: Cement industry NS-EN 19694-4:2016 Utslipp fra stasjonære kilder - Bestemmelse av klimagassutslipp fra energiintensiv industri - Del 4: Aluminiumsindustri Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 4: Aluminium industry Listenummer: 19/2016 Side: 27 av 116