Annonseringsdato: 2013-04-30 Listenummer: 5/2013 Standardiseringsprosjekter og nye standarder Listenummer: 5/2013 Side: 1 av 112
00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - internasjonale (ISO) ISO/DIS 124 Latex, rubber - Determination of total solids content Kommentarfrist: 28.06.2013 ISO/DIS 976 Rubber and plastics - Polymer dispersions and rubber latices - Determination of ph Kommentarfrist: 28.06.2013 ISO/DIS 2322 Styrene-butadiene rubber (SBR, YSBR) - Emulsion- and solution-polymerized types - Evaluation procedures (Revision of third edition ISO 2322:1985) Kommentarfrist: 01.07.2013 ISO/DIS 2476 Rubber, butadiene (BR) - Solution-polymerized types - Evaluation procedure Kommentarfrist: 01.07.2013 ISO/DIS 7500-1 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines (Revision of ISO 7500-1:1997) Kommentarfrist: 28.08.2013 ISO/DIS 11978 Optics and optical instruments - Contact lenses - Contact lenses and contact lens care products - Information to be supplied by the manufacturer for contact lens wearers Kommentarfrist: 04.09.2013 ISO/FDIS 4967 Steel - determination of content of non-metallic inclusions - Micrographic method using standard diagrams Kommentarfrist: 28.05.2013 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) EN ISO 4287:1998/prA2 Geometrical Product Specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters - Amendment 2 (ISO 4287:1997/DAM 2:2013) Kommentarfrist: 04.09.2013 pren 16572 Bevaring av kulturminner Ordliste over tekniske termer som omhandler mørtel til murverk, fuger og puss brukt i kulturminner Conservation of Cultural Heritage - Glossary of technical terms concerning mortars for masonry, renders and plasters used in cultural heritage Kommentarfrist: 28.08.2013 Listenummer: 5/2013 Side: 2 av 112
01 Generelt. Terminologi. Standardisering. Dokumentasjon pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren ISO 4618 rev Maling og lakk - Termer og definisjoner (ISO/DIS 4618:2012) Paints and varnishes - Terms and definitions (ISO/DIS 4618:2012) Kommentarfrist: 13.05.2013 pren ISO 10286 rev Gas cylinders - Terminology (ISO/DIS 10286:2013) Kommentarfrist: 04.09.2013 pren ISO 10628-1 Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO/DIS 10628-1:2013) Kommentarfrist: 30.06.2013 pren ISO 15007-1 rev Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO/DIS 15007-1:2013) Kommentarfrist: 24.06.2013 pren ISO 16559 Solid biofuels - Terminology, definitions and descriptions (ISO/DIS 16559:2013) Kommentarfrist: 24.06.2013 pren ISO 18323 Jewellery - Consumer confidence in the diamond industry (ISO/DIS 18323:2013) Kommentarfrist: 30.06.2013 Standardforslag til høring - internasjonale (ISO) ISO 7010:2011/DAmd 173 Safety sign E035: Liferaft knife Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 174 Safety sign E059: Escape ladder Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 175 Safety sign E060: Evacuation chair Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 176 Safety sign M048: Use gas detector Kommentarfrist: 08.06.2013 Listenummer: 5/2013 Side: 3 av 112
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2011/DAmd 177 Safety sign M049: Wear protective roller sport equipment Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 178 Safety sign P039: Hot works prohibited Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 168 Safety sign W037: Warning; Run over by remote operator controlled machine Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 169 Safety sign P009: No climbing Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 170 Safety sign M047: Use self-contained breathing appliance Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 171 Safety sign M046: Secure gas cylinders Kommentarfrist: 08.06.2013 ISO/DIS 128-24 Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings Kommentarfrist: 08.05.2013 ISO/DIS 4618 Paints and varnishes -- Terms and definitions Kommentarfrist: 13.05.2013 ISO/DIS 4618 Paints and varnishes -- Terms and definitions Kommentarfrist: 12.05.2013 ISO/DIS 8812 Earth-moving machinery - Backhoe loaders - Definitions and commercial specifications Kommentarfrist: 18.05.2013 ISO/DIS 10254 Air cargo and ground equipment - Vocabulary Kommentarfrist: 09.05.2013 Listenummer: 5/2013 Side: 4 av 112
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 15787 Technical production documentation - Heat-treated ferous parts - Presentation and indications Kommentarfrist: 03.05.2013 ISO/DIS 15787 Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications Kommentarfrist: 03.07.2013 ISO/DIS 16559 Solid biofuels -- Terminology, definitions and descriptions Kommentarfrist: 24.06.2013 ISO/DIS 24156-1 Grafiske notasjoner for begrepsmodellering i terminologiarbeid og begrepsrelasjoner med UML -- Del 1: Retningslinjer for bruk av UML og mind-mapping-notasjon i terminologiarbeid Graphic notations for concept modeling in terminology work and its relationship with UML -- Part 1: Guidelines for using UML and mind-mapping notation in terminology work Kommentarfrist: 04.05.2013 ISO-standarder ISO 7133:2013 Earth-moving machinery -- Scrapers -- Terminology and commercial specifications Erstatter A00008:20:013721 ISO 14451-1:2013 Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 1: Terminology ISO 23833:2013 Microbeam analysis -- Electron probe microanalysis (EPMA) -- Vocabulary Erstatter A00008:20:036995 Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Listenummer: 5/2013 Side: 5 av 112
01 Generelt. Terminologi. Standardisering. Dokumentasjon Fastsatte norske standarder NS-EN 9300-004:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 004: Description methods NS-EN 9300-011:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description "Data preparation" NS-EN 9300-012:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Reference process description ''Ingest'' NS-EN 9300-013:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description ''Archival Storage'' NS-EN 9300-014:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description ''Retrieval'' NS-EN 9300-015:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description ''Removal'' NS-EN 15380-4:2013 Jernbane - Klassifiseringssystem for jernbanevogner - Del 4: Funksjonsgrupper Railway applications - Classification system for railway vehicles - Part 4: Function groups 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 15628 Maintenance - Qualification of maintenance personnel Kommentarfrist: 06.05.2013 pren 16372 Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren 16372 Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 Listenummer: 5/2013 Side: 6 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren 16489-2 Professional indoor sun exposure services - Part 2: Required qualification and competence of the indoor sun exposure consultant Kommentarfrist: 11.09.2013 pren 16489-3 Professional indoor sun exposure services - Part 3: Requirements for the provision of services Kommentarfrist: 11.09.2013 pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren 301549 Accessibility requirements for public procurement of ICT products and services in Europe Kommentarfrist: 21.07.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 11270 Intelligent transport systems -- Lane keeping assistance systems (LKAS) -- Performance requirements and test procedures Kommentarfrist: 04.05.2013 ISO/DIS 17572-1 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 1: General requirements and conceptual model Kommentarfrist: 16.06.2013 ISO/DIS 17572-1 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 1: General requirements and conceptual model Kommentarfrist: 13.08.2013 ISO/DIS 17572-2 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: 16.06.2013 ISO/DIS 17572-2 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: 13.08.2013 ISO/DIS 17572-3 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 3: Dynamic location references (dynamic profile) Kommentarfrist: 16.06.2013 Listenummer: 5/2013 Side: 7 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 17572-3 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 3: Dynamic location references (dynamic profile) Kommentarfrist: 13.08.2013 ISO/DIS 22322 Societal security -- Emergency management -- Public warning Kommentarfrist: 01.06.2013 ISO/DIS 26684 Intelligent transport systems -- Cooperative intersection signal information and violation warning systems (CIWS) -- Performance requirements and test procedures Kommentarfrist: 04.05.2013 ISO/DIS 34001 Security Management System Kommentarfrist: 15.08.2013 ISO-standarder ISO 11843-6:2013 Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations ISO 12855:2012/Cor 1:2013 ISO 14906:2011/Cor 1:2013 ISO 18436-8:2013 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound ISO/TR 13184-1:2013 Intelligent transport systems -- Guidance protocol via personal ITS station for advisory safety systems -- Part 1: General information and use case definitions ISO/TR 24014-3:2013 Public transport -- Interoperable fare management system -- Part 3: Complementary concepts to Part 1 for multi-application media Erstatter A00008:20:041985 ISO/TS 13141:2010/Cor 1:2013 ISO/TS 17575-1:2010/Cor 1:2013 ISO/TS 17575-3:2011/Cor 1:2013 Listenummer: 5/2013 Side: 8 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/TS 19218-1:2011/Amd 1:2013 CEN Workshop Agreements CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe - BII Architecture CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe - Tender Notification CWA 16560:2013 Business Interoperability Interfaces for Public procurement in Europe - Use of profiles in the tendering process CWA 16561:2013 Business Interoperability Interfaces for Public procurement in Europe - ecatalogue profiles CWA 16562:2013 Business Interoperability Interfaces for public procurement in Europe - Post award profiles Rapporter fra CEN (CR) CEN ISO/TR ISO 24014-3:2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR 24014-3:2013) CEN ISO/TS 13140-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) CEN ISO/TS 13141:2010/AC:2013 Electronic fee collection - Localisation augmentation communication for autonomous systems - Technical Corrigendum 1 (ISO/TS 13141:2010/Cor 1:2013) CEN ISO/TS 13143-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) Listenummer: 5/2013 Side: 9 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 13143-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 2: Abstract test suite (ISO/TS 13143-2:2011) CEN ISO/TS 16401-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) CEN ISO/TS 16401-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) CEN ISO/TS 16403-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) CEN ISO/TS 16403-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO/TS 16403-2:2012) CEN ISO/TS 16407-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TDS 16407-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) CEN ISO/TS 16407-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) CEN ISO/TS 16410-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TDS 16410-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) CEN ISO/TS 16410-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) CEN ISO/TS 17444-1:2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS 17444-1:2012) CEN ISO/TS 17575-1:2010/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS 17575-1:2010/Cor 1:2013) Listenummer: 5/2013 Side: 10 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 17575-3:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) CEN ISO/TS 17575-3:2011/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS 17575-3:2011/Cor 1:2013) CEN ISO/TS 17575-4:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) CEN ISO/TS 18234-3:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS 18234-3:2013) CEN ISO/TS 18234-11:2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS 18234-11:2013) CEN/TR 14142-2:2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC 17024 for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission Listenummer: 5/2013 Side: 11 av 112
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail Fastsatte norske standarder NS-EN 9115:2013 Systemer for kvalitetsstyring - Krav til organisasjoner innenfor luftfart, romfart og forsvar - Leveringsklar programvare (supplement til EN 9100) Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) NS-ISO 39001:2012 Styringssystemer for trafikksikkerhet - Krav med brukerveiledning Road traffic safety (RTS) management systems - Requirements with guidance for use 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO 16140-1 rev Fôr- og nærimgsmiddelmikrobiologi Metodevalidering Del 1: Ordliste (ISO/DIS 16140-1:2013) Microbiology of food and animal feed - Method validation - Part 1: Vocabulary (ISO/DIS 16140-1:2013) Kommentarfrist: 03.06.2013 pren ISO 16140-2 rev Fôr- og næringsmiddelmikrobiologi Metodevalidering Del 2: Protokoll for validering av alternative (proprietære) metoder mot referansemetoder (ISO/DIS 16140-2:2013) Microbiology of food and animal feed - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO/DIS 16140-2:2013) Kommentarfrist: 03.06.2013 Listenummer: 5/2013 Side: 12 av 112
07 Matematikk. Naturvitenskap pren ISO 16649 Microbiology of food and animal feeding stuffs - Horizontal method for the enumeration of beta-glucuronidase-positive Escherichia coli - Part 3: Detection and most probable number technique using 5-bromo-4-chloro-3-indolyl-beta-D-glucuronide (ISO/DIS 16649 3:2013) Kommentarfrist: 11.09.2013 pren ISO 17468 Fôr- og næringsmiddelmikrobiologi Tekniske krav og veiledning for etablering eller revisjon av standardmetoder (ISO/DIS 17468:2013) Microbiology of food and animal feed - Technical requirements and guidance on establishment or revision of standard methods (ISO/DIS 17468:2013) Kommentarfrist: 03.06.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 16140-1 Microbiology of food and animal feed -- Method validation -- Part 1: Vocabulary Kommentarfrist: 03.06.2013 ISO/DIS 16140-2 Microbiology of food and animal feed -- Method validation -- Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method Kommentarfrist: 03.06.2013 ISO/DIS 17468 Microbiology of food and animal feed - Technical requirements and guidance on establishment or revision of standard methods Kommentarfrist: 02.06.2013 ISO-standarder ISO/TS 15216-1:2013 Microbiology of food and animal feed -- Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR -- Part 1: Method for quantification ISO/TS 15216-2:2013 Microbiology of food and animal feed -- Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR -- Part 2: Method for qualitative detection Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) Listenummer: 5/2013 Side: 13 av 112
07 Matematikk. Naturvitenskap CEN ISO/TS 6579-2:2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS 6579-2:2012) CEN ISO/TS 10272-3:2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS 13830:2011 Veiledning om merking av produserte nano objekter og produkter som inneholder produserte nano objekter (ISO/TS 13830:2011) Guidance on the labelling of manufactured nano-objects and products containing manufactured nano-objects (ISO/TS 13830:2011) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures CEN/TR 15449-1:2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR 15449-2:2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR 15449-3:2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment CEN/TS 15634-2:2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR Listenummer: 5/2013 Side: 14 av 112
11 Helsevesen, Teknikk 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 11607-1:2009/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 1: Krav til materialer, sterile barrieresystemer og emballasjesystemer - Endringsblad 1 (ISO 11607-1:2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems - Amendment 1 (ISO 11607-1:2006/DAM 1:2013) Kommentarfrist: 07.08.2013 EN ISO 11607-2:2006/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 2: Krav til formgiving, forsegling og sammensetting - Endringsblad 1 (ISO 11607-2:2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes - Amendment 1 (ISO 11607-2:2006/DAM 1:2013) Kommentarfrist: 07.08.2013 pren 13718-1 Ambulanser og ambulanseutstyr - Luftambulanser - Del 1: Krav til medisinsk utstyr i luftambulanser Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances Kommentarfrist: 07.07.2013 pren 16372 Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren 16372 Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren ISO 7494-2 rev Dentistry - Dental units - Part 2: Media channels and connections (ISO/DIS 7494-2:2013) Kommentarfrist: 28.08.2013 pren ISO 8836 rev Sugekatetere for bruk i luftveiene (ISO/DIS 8836:2013) Suction catheters for use in the respiratory tract (ISO/DIS 8836:2013) Kommentarfrist: 24.06.2013 pren ISO 9173-3 Dentistry - Extraction forceps - Part 3: Design and dimensions (ISO/DIS 9173-3:2013) Kommentarfrist: 07.07.2013 pren ISO 10343 rev Oftalmiske instrumenter - Oftalmometre (ISO/DIS 10343:2012) Ophthalmic instruments - Ophthalmometers (ISO/DIS 10343:2012) Kommentarfrist: 06.05.2013 Listenummer: 5/2013 Side: 15 av 112
11 Helsevesen, Teknikk pren ISO 11197 rev Medisinske forsyningsenheter (ISO/DIS 11197:2012) Medical supply units (ISO/DIS 11197:2012) Kommentarfrist: 28.05.2013 pren ISO 11197 Medisinske forsyningsenheter (ISO/DIS 11197:2013) Medical supply units (ISO/DIS 11197:2013) Kommentarfrist: 28.05.2013 pren ISO 11499 rev Dentistry - Single-use cartridges for local anaesthetics (ISO/DIS 11499:2013) Kommentarfrist: 11.09.2013 pren ISO 11978 rev Ophthalmic optics - Contact lenses and contact lens care products - Labelling (ISO/DIS 11978:2013) Kommentarfrist: 04.09.2013 pren ISO 16635-2 Dentistry - Dental rubber dam technique - Part 2: Clamp forceps (ISO/DIS 16635-2:2012) Kommentarfrist: 06.05.2013 pren ISO 24234 rev Tannpleie - Dental amalgam (ISO/DIS 24234:2013) Dentistry - Dental amalgam (ISO/DIS 24234:2013) Kommentarfrist: 10.06.2013 Standardforslag til høring - internasjonale (ISO) ISO 11607-1:2006/DAmd 1 Kommentarfrist: 07.08.2013 ISO 11607-2:2006/DAmd 1 Kommentarfrist: 07.08.2013 ISO/DIS 7176-22 Wheelchairs - Technical systems and aids for disabled or handicapped persons -- Part 22: Set-up procedures Kommentarfrist: 15.08.2013 ISO/DIS 7176-22 Wheelchairs - Part 22: Set-up procedures Kommentarfrist: 18.06.2013 ISO/DIS 7494-2 Dental units - Part 2: Air and water supply systems Kommentarfrist: 21.08.2013 Listenummer: 5/2013 Side: 16 av 112
11 Helsevesen, Teknikk ISO/DIS 8836 Suction catheters for use in the respiratory tract Kommentarfrist: 24.06.2013 ISO/DIS 9173-3 Dentistry -- Extraction forceps -- Part 3: Design and dimensions Kommentarfrist: 07.07.2013 ISO/DIS 10343 Optics and optical instruments - Ophthalmic instruments - Ophthalmometers Kommentarfrist: 06.05.2013 ISO/DIS 10343 Ophthalmic instruments -- Ophthalmometers Kommentarfrist: 05.05.2013 ISO/DIS 12891-2 Retrieval and analysis of surgical implants -- Part 2: Analysis of retrieved surgical implants Kommentarfrist: 07.07.2013 ISO/DIS 12891-2 Implants for surgery - Retrieval and analysis of surgical implants - Part 2: Analysis of retrieved metallic surgical implants Kommentarfrist: 07.05.2013 ISO/DIS 13958 Concentrates for haemodialysis or haemodiafiltration Kommentarfrist: 15.06.2013 ISO/DIS 13959 Water for haemodialysis or haemodiafiltration - Requirements Kommentarfrist: 15.06.2013 ISO/DIS 16635-2 Dentistry -- Dental rubber dam technique -- Part 2: Clamp forceps Kommentarfrist: 06.05.2013 ISO/DIS 16840-3 Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices Kommentarfrist: 14.06.2013 ISO/DIS 17218 Sterile acupuncture needles for single use Kommentarfrist: 11.06.2013 Listenummer: 5/2013 Side: 17 av 112
11 Helsevesen, Teknikk ISO/DIS 24234 Tannpleie - Kvikksølv og metallpulver for dental amalgam. Dentistry -- Mercury and alloys for dental amalgam Kommentarfrist: 10.06.2013 ISO/DIS 24234 Dentistry -- Dental amalgam Kommentarfrist: 09.06.2013 ISO-standarder ISO 5840-3:2013 Cardiovascular implants -- Cardiac valve prostheses -- Part 3: Heart valve substitutes implanted by transcatheter techniques ISO 7396-1:2007/Amd 3:2013 Terminology relating to alarm systems ISO 8600-1:2013 Endoscopes -- Medical endoscopes and endotherapy devices -- Part 1: General requirements Erstatter A00008:20:039935 ISO 10524-3:2005/Amd 1:2013 Filtration and information to be supplied by the manufacturer ISO 14708-7:2013 Implants for surgery -- Active implantable medical devices -- Part 7: Particular requirements for cochlear implant systems ISO/TS 19218-1:2011/Amd 1:2013 Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Listenummer: 5/2013 Side: 18 av 112
13 Miljøvern. Helsevern. Sikkerhet 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren 458 Hørselsvern - Anbefalinger for valg, bruk, stell og vedlikehold - Retningslinjer Hearing protectors - Recommendations for selection, use, care and maintenance - Guidance document Kommentarfrist: 11.09.2013 pren 469 rev Vernetøy for brannmannskap - Krav og prøvingsmetoder til vernetøy ved brannslukking Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting Kommentarfrist: 10.05.2013 pren 469 Vernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking Protective clothing for firefighters - Performance requirements for protective clothing for firefighting Kommentarfrist: 10.05.2013 pren 943-1 rev Vernetøy mot faste, flytende og gassformige kjemikalier, innbefattet flytende og faste aerosoler - Del 1: Funksjonskrav for ventilert og ikke-ventilert gasstett (type 1) vernetøy Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) suits Kommentarfrist: 04.08.2013 pren 943-1 Protective clothing against solid, liquid and gaseous chemicals, including liquid and solid aerosols - Part 1: Performance requirements for ventilated and non-ventilated "gas-tight" (Type 1) suits Kommentarfrist: 04.08.2013 pren 13381-9 Test methods for determining the contribution to the fire resistance of structural members - Part 9: Applied fire protection systems to steel beams with web openings Kommentarfrist: 28.08.2013 pren 14432 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves Kommentarfrist: 21.07.2013 pren 14433 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves Kommentarfrist: 14.07.2013 pren 15346 Plast - Resirkulert plast - Karakterisering av returmateriale i polyvinylklorid (PVC) Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates Kommentarfrist: 21.07.2013 Listenummer: 5/2013 Side: 19 av 112
13 Miljøvern. Helsevern. Sikkerhet pren 15348 Plast - Resirkulert plast - Karakterisering av returmateriale i polyetylen tereftalat (PET) Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates Kommentarfrist: 21.07.2013 pren 16522 Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for venting systems Kommentarfrist: 03.06.2013 pren 16523-1 Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier Del 1: Gjennomtrenging av flytende kjemikalier som er i kontinuerlig kontakt med materialer Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact Kommentarfrist: 10.06.2013 pren 16574 Vernetøy Beskyttelse mot flytende kjemikalier Krav til væsketetthet hos vernetøy som består av flere komponenter og som brukes av redningsstyrker (type 3 ET utstyr) Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquidtight connections between different parts of the clothing for emergency teams (Type 3 ET Equipment) Kommentarfrist: 07.08.2013 pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren ISO 4126-6 Sikkerhetsutstyr for beskyttelse mot overtrykk - Del 6: Bruk, valg og installasjon av sprengskiver (ISO/DIS 4126-6:2013) Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO/DIS 4126-6:2013) Kommentarfrist: 07.07.2013 pren ISO 14644-12 Cleanrooms and associated controlled environments - Part 12: Classification of air cleanliness by nanoscale particle concentration (ISO/DIS 14644-12:2013) Kommentarfrist: 28.08.2013 pren ISO 16198 Soil quality - Plant-based biotest to assess the environmental bioavailability of trace elements to plants (ISO/DIS 16198:2013) Kommentarfrist: 11.09.2013 pren ISO 17184 Soil quality - Determination of carbon and nitrogen by near infrared spectrometry (ISO/DIS 17184:2013) Kommentarfrist: 30.06.2013 Listenummer: 5/2013 Side: 20 av 112
13 Miljøvern. Helsevern. Sikkerhet pren ISO 17892-1 Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 1: Bestemmelse av vanninnhold (ISO/DIS 17892-1:2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 1: Determination of water content (ISO/DIS 17892-1:2013) Kommentarfrist: 04.09.2013 pren ISO 17892-2 Geotekniske felt- og laboratorieundersøkelser - Laboratorieprøving av jord - Del 2: Bestemmelse av densitet av finkornet jord (ISO/DIS 17892-2:2013) Geotechnical investigation and testing - Laboratory testing of soil - Part 2: Determination of density of fine-grained soil (ISO/DIS 17892-2:2013) Kommentarfrist: 04.09.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 4126-6 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices Kommentarfrist: 07.07.2013 ISO/DIS 5667-6 Water quality -- Sampling -- Part 6: Guidance on sampling of rivers and streams Kommentarfrist: 05.06.2013 ISO/DIS 8030 Rubber and plastics hoses - Method of test for flammability (Revision of first edition (ISO 8030:1987)) Kommentarfrist: 21.08.2013 ISO/DIS 8672 Air quality -- Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy -- Membrane filter method Kommentarfrist: 08.05.2013 ISO/DIS 14046 Environmental management -- Water footprint -- Principles, requirements and guidelines Kommentarfrist: 11.06.2013 ISO/DIS 14644-12 Cleanrooms and associated controlled environments -- Part 12: Classification of air cleanliness by nanoscale particle concentration Kommentarfrist: 28.08.2013 ISO/DIS 14787 Protective clothing -- Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions -- Atomizer test Kommentarfrist: 21.05.2013 Listenummer: 5/2013 Side: 21 av 112
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 16308 Water quality -- Determination of glyphosate and AMPA -- Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection Kommentarfrist: 04.05.2013 ISO/DIS 17184 Soil quality -- Determination of carbon and nitrogen by near infrared spectrometry Kommentarfrist: 30.06.2013 ISO-standarder ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method Erstatter A00008:20:038500 ISO/TS 13447:2013 Fire safety engineering -- Guidance for use of fire zone models Rapporter fra CEN (CR) CEN ISO/TS 15011-6:2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) CEN ISO/TR 7250-2:2011 Basale kroppsmål for teknologisk design Del 2: Statistisk oppsummering av kroppsmål for individuelle ISO populasjoner (ISO/TR 7250-2:2010) Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010) CEN ISO/TR 7250-2:2011/A1:2013 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR 7250-2:2010/Amd 1:2013) CEN ISO/TR 9241-100:2011 Ergonomi for samhandling mellom menneske og system Del 100: Innføring i standarder relatert til software-ergonomi (ISO/TR 9241-100:2010) Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) CEN ISO/TS 15011-6:2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS 15011-6:2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) Listenummer: 5/2013 Side: 22 av 112
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 1317-6:2012 Skadereduserende vegtiltak - Del 6: Fotgjengerrekkverk / Road restraint systems - Part 6: Pedestrian restraint system, Pedestrian Parapet Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16130:2011 Karakterisering av avfall - På stedet verifikasjon Characterization of waste - On-site verification CEN/TR 16148:2011 Vurdering av hode- og nakkeskader, forbrenningsskader og hørselsskader - Veiledning for komiteer som utarbeider hjelmstandarder Head and neck impact, burn and noise injury criteria - A Guide for CEN helmet standards committees CEN/TR 16149:2011 Veiledning om utarbeidelse av standarder i CEN/TC 158 Guidance Document for drafting CEN/TC 158 Standards CEN/TR 16151:2011 Vannundersøkelse - Veiledning i utforming av multimetriske indekser Water quality - Guidance on the design of Multimetric Indices CEN/TR 16176:2011 Karakterisering av avfall Screeningsmetode for grunnstoffsammensetning ved bruk av røntgenfluorescensspektrometri for verifisering på stedet Characterization of waste - Screening methods for elemental composition by X-ray fluorescence spectrometry for on-site verification CEN/TR 16184:2011 Characterization of Waste - State-of-the-art document - Analysis of eluates CEN/TR 16208:2011 Biobaserte produkter - Oversikt over standarder Biobased products - Overview of standards CEN/TR 16220:2011 Byggevarer - Vurdering av frigjøring av farlige stoffer - Komplement til prøvetaking Construction products - Assessment of release of dangerous substances - Complement to sampling CEN/TR 16243:2011 Omgivelsesluft Veiledning for måling av elementært karbon (EC) og organisk karbon (OC) avsatt på filtre Ambient air quality - Guide for the measurement of elemental carbon (EC) and organic carbon (OC) deposited on filters Listenummer: 5/2013 Side: 23 av 112
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16269:2011 Ambient air - Guide for the measurement of anions and cations in PM2,5 CEN/TR 16303-1:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 1: Felles referanse informasjon og rapportering Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 1: Common reference information and reporting CEN/TR 16303-2:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 2: Kjøretøymodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 2: Vehicle Modelling and Verification CEN/TR 16303-3:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 3: Prøvingsmodellering og verifikasjon Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 3: Test Item Modelling and Verification CEN/TR 16303-4:2012 Skadereduserende vegtiltak Veiledning for datateknisk kollisjonstesting av kjøretøysikkerhet Del 4: Valideringsprosedyre Road restraint systems - Guidelines for computational mechanics of crash testing against vehicle restraint system - Part 4: Validation Procedures CEN/TR 16363:2012 Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries CEN/TR 16364:2012 Materialers påvirkning på drikkevann - Påvirkning ved migrering - Prediksjon av migrering fra organiske materialer ved bruk av matematisk modellering Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling CEN/TR 16365:2012 Karakterisering av avfall - Prøvetaking av avfall fra bergindustri Characterization of waste - Sampling of waste from extractive industries CEN/TR 16376:2012 Karakterisering av avfall - Generell veileder for karakterisering av avfall fra bergindustrien Characterization of waste - Overall guidance document for characterization of waste from the extractive industries CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle Listenummer: 5/2013 Side: 24 av 112
13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16391:2012 Mekaniske vibrasjoner og støt - Håndoverførte vibrasjoner - Virkning av koplingskrefter ved hånd-maskin grenseflaten for evaluering av eksponering Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation CEN/TS 1187:2012 Prøvingsmetoder for utvendig branneksponering av tak Test methods for external fire exposure to roofs CEN/TS 1317-8:2012 Skadereduserende vegtiltak - Del 8: Skadereduserende vegtiltak for motorsykler som reduserer alvorlighetsgraden ved motorsyklistenes kollisjon med vegrekkverk Road restraint systems - Part 8: Motorcycle road restraint systems which reduce the impact severity of motorcyclist collisions with safety barriers CEN/TS 14972:2011 Faste brannslokkesystemer - Vanntåkesystemer - Dimensjonering og installering Fixed firefighting systems - Watermist systems - Design and installation CEN/TS 15119-2:2012 Tre-og trebaserte produkters holdbarhet - Vurdering av utslipp fra behandlet tre til omgivelsene - Del 2: Trevarer eksponert i bruksklasse 4 og 5 (i kontakt med grunnen, ferskvann og sjøvann) - Laboratoriemetode Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment CEN/TS 15862:2012 Karakterisering av avfall - Samsvarsutlekkingsprøving - Ett-trinns utlekkingsprøving for monolitter ved fastsatt væske til overflateforhold (L/A) for prøve med fastsatt minimumsdimensjon Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions CEN/TS 15863:2012 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med periodisk fornyelse av utlekkingsvæske under fastsatte prøvingsbetingelser Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions CEN/TS 15864:2012 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med kontinuerlig fornyelse av utlekkingsvæske under betingelser relevant for spesifiserte scenario(er) Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) CEN/TS 16010:2013 Plast - Resirkulert plast - Prøvingsprosedyrer for plastavfall og returmateriale Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates Listenummer: 5/2013 Side: 25 av 112
13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16011:2013 Plast - Resirkulert plast - Preparering av prøver Plastics - Recycled plastics - Sample preparation CEN/TS 16115-1:2011 Luftundersøkelse - Måling av bioaerosoler - Del 1: Bestmmelse av mugg ved bruk av filterprøvingssystem og dyrkingbasert analyse Ambient air quality - Measurement of bioaerosols - Part 1: Determination of moulds using filter sampling systems and culturebased analyses CEN/TS 16170:2012 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i optisk emisjonsspektrometri (ICP-OES) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) CEN/TS 16171:2012 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i massespektrometri (ICP- MS) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) CEN/TS 16172:2013 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer - Grafittovn med atomabsorpsjonsspektrometri (GF-AAS) Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) CEN/TS 16175-1:2013 Slam, behandlet organisk avfall og jord - bestemmelse av kvikksølv i kongevann- og salpetersyreblanding - Del 1: Kalddampatomabsorpsjonsspektrometri Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) CEN/TS 16175-2:2013 Slam, behandlet organisk avfall og jord - Bestemmelse av kvikksølv - Del 2: Kalddampatomfluorescensspektrometri (CV-AFS) Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) CEN/TS 16177:2012 Sludge, treated biowaste and soil - Extraction for the determination of extractable ammonia, nitrate and nitrite CEN/TS 16178:2012 Sludge, treated biowaste and soil - Determination of pharmaceutical products CEN/TS 16182:2012 Sludge treated biowaste and soil - Determination of nonylphenols (NP) and nonylphenol-mono- and diethoxylates using gas chromatography with mass selective detection (GC-MS) CEN/TS 16183:2012 Slam, behandlet organisk avfall og jord - Bestemmelse av utvalgte ftalater ved bruk av kapillær gasskromatorgafi med massespektrometrisk deteksjon (GC-MS) Sludge, treated biowaste and soil - Determination of selected phthalates using capillary gas chromatography with mass spectrometric detection (GC-MS) Listenummer: 5/2013 Side: 26 av 112