Annonseringsdato: 2013-04-05 Listenummer: 4/2013 Standardiseringsprosjekter og nye standarder Listenummer: 4/2013 Side: 1 av 146
00 ICS-KODE MANGLER ELLER ER FEIL 00 ICS-KODE MANGLER ELLER ER FEIL Standardforslag til høring - europeiske (CEN) pren 1709 Safety requirements for cableway installations designed to carry persons - Precommissioning inspection, maintenance, operational inspection and checks Kommentarfrist: 31.07.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 128-24 Technical drawings - General principles of presentation - Part 24: Lines on mechanical engineering drawings Kommentarfrist: 08.05.2013 ISO/DIS 683-17 Heat-treated steels, alloy steels and free-cutting steels - Part 17: Ball and roller bearing steels [Revision of first edition (ISO 683-17:1976)] Kommentarfrist: 21.08.2013 ISO/DIS 2000 Rubber, raw natural - Guidelines for technically specified grades (Revision of fifth edition (ISO 2000:1989) Kommentarfrist: 20.05.2013 ISO/DIS 4355 Bases for design of structures - Determination of snow loads on roofs Kommentarfrist: 14.05.2013 ISO/DIS 4895 Plastics - Liquid epoxy resins - Determination of tendency to crystallize Kommentarfrist: 21.08.2013 ISO/DIS 6506-1 Metallic materials - Brinell hardness test - Part 1: Test method (Revision of ISO 6506:1981 and ISO 410:1982) Kommentarfrist: 31.07.2013 ISO/DIS 6506-2 Metallic materials - Brinell hardness test - Part 2: Verification of testing machines [Revision of first edition (ISO 156:1982)] Kommentarfrist: 31.07.2013 ISO/DIS 6506-3 Metallic materials - Brinell hardness test - Part 3: Calibration of reference blocks [Revision of first edition (ISO 726:1982)] Kommentarfrist: 31.07.2013 ISO/DIS 6508-1 Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 1: Test method (Revision of ISO 6508:1986 and ISO 1024:1989) Kommentarfrist: 07.08.2013 Listenummer: 4/2013 Side: 2 av 146
00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS 6508-2 Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 2: Verification of testing machines (Revision of ISO 716:1986 and ISO 1079:1989) Kommentarfrist: 07.08.2013 ISO/DIS 6508-3 Metallic materials - Rockwell hardness test (scales A, B, C, D, E, F, G, H, K, N, T) - Part 3: Calibration of reference blocks (Revision of ISO 674:1988 and ISO 1355:1989) Kommentarfrist: 07.08.2013 ISO/DIS 7176-22 Wheelchairs - Part 22: Set-up procedures Kommentarfrist: 18.06.2013 ISO/DIS 8030 Rubber and plastics hoses - Method of test for flammability (Revision of first edition (ISO 8030:1987)) Kommentarfrist: 21.08.2013 ISO/DIS 8728 Ships and marine technology - Marine gyro-compasses Kommentarfrist: 15.05.2013 ISO/DIS 8812 Earth-moving machinery - Backhoe loaders - Definitions and commercial specifications Kommentarfrist: 18.05.2013 ISO/DIS 10327 Kommentarfrist: 11.06.2013 ISO/DIS 11110 Winter-sports equipment - Test devices for the setting of the functional unit ski-boot-binding - Requirements and testing Kommentarfrist: 25.06.2013 ISO/DIS 11346 Rubber, vulcanized or thermoplastic - Estimation of lifetime and maximum temperature of use from an Arrhenius plot Kommentarfrist: 22.06.2013 ISO/DIS 13958 Concentrates for haemodialysis or haemodiafiltration Kommentarfrist: 15.06.2013 ISO/DIS 13959 Water for haemodialysis or haemodiafiltration - Requirements Kommentarfrist: 15.06.2013 Listenummer: 4/2013 Side: 3 av 146
00 ICS-KODE MANGLER ELLER ER FEIL ISO/DIS 13992 Alpine touring ski-bindings - Safety requirements and test methods Kommentarfrist: 25.06.2013 ISO/DIS 14104 Gears - Surface temper etch inspection after grinding Kommentarfrist: 15.05.2013 ISO/DIS 15512 Plastics - Determination of water content Kommentarfrist: 21.08.2013 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren ISO 4618 rev Maling og lakk - Termer og definisjoner (ISO/DIS 4618:2012) Paints and varnishes - Terms and definitions (ISO/DIS 4618:2012) Kommentarfrist: 13.05.2013 pren ISO 10628-1 Diagrams for the chemical and petrochemical industry - Part 1: Specification of diagrams (ISO/DIS 10628-1:2013) Kommentarfrist: 30.06.2013 pren ISO 15007-1 rev Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO/DIS 15007-1:2013) Kommentarfrist: 24.06.2013 pren ISO 16559 Solid biofuels - Terminology, definitions and descriptions (ISO/DIS 16559:2013) Kommentarfrist: 24.06.2013 pren ISO 18323 Jewellery - Consumer confidence in the diamond industry (ISO/DIS 18323:2013) Kommentarfrist: 30.06.2013 Standardforslag til høring - internasjonale (ISO) ISO 7010:2011/DAmd 173 Safety sign E035: Liferaft knife Kommentarfrist: 08.06.2013 Listenummer: 4/2013 Side: 4 av 146
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 7010:2011/DAmd 174 Safety sign E059: Escape ladder Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 175 Safety sign E060: Evacuation chair Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 176 Safety sign M048: Use gas detector Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 177 Safety sign M049: Wear protective roller sport equipment Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 178 Safety sign P039: Hot works prohibited Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 168 Safety sign W037: Warning; Run over by remote operator controlled machine Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 169 Safety sign P009: No climbing Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 170 Safety sign M047: Use self-contained breathing appliance Kommentarfrist: 08.06.2013 ISO 7010:2011/DAmd 171 Safety sign M046: Secure gas cylinders Kommentarfrist: 08.06.2013 ISO/DIS 4618 Paints and varnishes -- Terms and definitions Kommentarfrist: 13.05.2013 ISO/DIS 4618 Paints and varnishes -- Terms and definitions Kommentarfrist: 12.05.2013 Listenummer: 4/2013 Side: 5 av 146
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO/DIS 6707-2 Building and civil engineering -- Vocabulary -- Part 2: Contract terms Kommentarfrist: 27.04.2013 ISO/DIS 10254 Air cargo and ground equipment - Vocabulary Kommentarfrist: 09.05.2013 ISO/DIS 15787 Technical production documentation - Heat-treated ferous parts - Presentation and indications Kommentarfrist: 03.05.2013 ISO/DIS 15787 Technical product documentation -- Heat-treated ferrous parts -- Presentation and indications Kommentarfrist: 03.07.2013 ISO/DIS 16559 Solid biofuels -- Terminology, definitions and descriptions Kommentarfrist: 24.06.2013 ISO/DIS 24156-1 Grafiske notasjoner for begrepsmodellering i terminologiarbeid og begrepsrelasjoner med UML -- Del 1: Retningslinjer for bruk av UML og mind-mapping-notasjon i terminologiarbeid Graphic notations for concept modeling in terminology work and its relationship with UML -- Part 1: Guidelines for using UML and mind-mapping notation in terminology work Kommentarfrist: 04.05.2013 ISO-standarder ISO 445:2013 Pallets for materials handling -- Vocabulary Erstatter A00008:20:042053 ISO 472:2013 Plastics -- Vocabulary Erstatter A00008:20:026821 ISO 1101:2012/Cor 1:2013 ISO 7133:2013 Earth-moving machinery -- Scrapers -- Terminology and commercial specifications Erstatter A00008:20:013721 ISO 7134:2013 Earth-moving machinery -- Graders -- Terminology and commercial specifications Erstatter A00008:20:013723,A00008:20:027219 Listenummer: 4/2013 Side: 6 av 146
01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO 14451-1:2013 Pyrotechnic articles -- Pyrotechnic articles for vehicles -- Part 1: Terminology Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Fastsatte norske standarder NS-EN 9300-004:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 004: Description methods NS-EN 9300-011:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 011: Reference process description "Data preparation" NS-EN 9300-012:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 012: Reference process description ''Ingest'' NS-EN 9300-013:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 013: Reference process description ''Archival Storage'' NS-EN 9300-014:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 014: Reference process description ''Retrieval'' NS-EN 9300-015:2013 Aerospace series - LOTAR - LOng Term Archiving and Retrieval of digital technical product documentation such as 3D, CAD and PDM data - Part 015: Reference process description ''Removal'' NS-EN 13956:2012 Tetningsmaterialer på rull - Takbelegg av plast eller gummi - Definisjoner og kjennetegn Flexible sheets for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics Listenummer: 4/2013 Side: 7 av 146
01 Generelt. Terminologi. Standardisering. Dokumentasjon NS-EN 15380-4:2013 Jernbane - Klassifiseringssystem for jernbanevogner - Del 4: Funksjonsgrupper Railway applications - Classification system for railway vehicles - Part 4: Function groups NS-EN ISO 10628-2:2012 Diagrammer for kjemisk og petrokjemisk industri - Del 2: Grafiske symboler (ISO 10628-2:2012) Diagrams for the chemical and petrochemical industry - Part 2: Graphical symbols (ISO 10628-2:2012) NS-EN ISO 18542-1:2012 Veikjøretøyer - Standardisert terminologi for informasjon om reparasjon og vedlikehold (RMI) - Del 1: Generell informasjon og definisjon av brukstilfeller (ISO 18542-1:2012) Road vehicles - Standardized repair and maintenance information (RMI) terminology - Part 1: General information and use case definition (ISO 18542-1:2012) Tilbaketrukne norske standarder NS-EN 13956:2005 Tetningsmaterialer på rull - Takbelegg av plast eller gummi - Definisjoner og kjennetegn - (innbefattet rettelsesblad AC:2006) Flexible sheet for waterproofing - Plastic and rubber sheets for roof waterproofing - Definitions and characteristics - (Corrigendum AC:2006 incorporated) NS-EN ISO 10628:2000 Flytskjema for prosessanlegg - Alminnelige bestemmelser (ISO 10628:1997) Flow diagrams for process plants - General rules (ISO 10628:1997) 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren 15628 Maintenance - Qualification of maintenance personnel Kommentarfrist: 06.05.2013 pren 16372 Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren 16372 Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren 16494 Jernbane - Krav til ERTMS skilting ved spor Railway applications - Requirements for ERTMS Trackside Boards Kommentarfrist: 22.04.2013 Listenummer: 4/2013 Side: 8 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren 301549 Accessibility requirements for public procurement of ICT products and services in Europe Kommentarfrist: 21.07.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 11270 Intelligent transport systems -- Lane keeping assistance systems (LKAS) -- Performance requirements and test procedures Kommentarfrist: 04.05.2013 ISO/DIS 13528 Statistical methods for use in proficiency testing by interlaboratory comparisons Kommentarfrist: 15.04.2013 ISO/DIS 17572-1 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 1: General requirements and conceptual model Kommentarfrist: 16.06.2013 ISO/DIS 17572-1 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 1: General requirements and conceptual model Kommentarfrist: 13.08.2013 ISO/DIS 17572-2 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: 16.06.2013 ISO/DIS 17572-2 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 2: Pre-coded location references (precoded profile) Kommentarfrist: 13.08.2013 ISO/DIS 17572-3 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 3: Dynamic location references (dynamic profile) Kommentarfrist: 16.06.2013 ISO/DIS 17572-3 Intelligent transport systems (ITS) -- Location referencing for geographic databases -- Part 3: Dynamic location references (dynamic profile) Kommentarfrist: 13.08.2013 Listenummer: 4/2013 Side: 9 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS 26684 Intelligent transport systems -- Cooperative intersection signal information and violation warning systems (CIWS) -- Performance requirements and test procedures Kommentarfrist: 04.05.2013 ISO-standarder ISO 11843-6:2013 Capability of detection -- Part 6: Methodology for the determination of the critical value and the minimum detectable value in Poisson distributed measurements by normal approximations ISO 12855:2012/Cor 1:2013 ISO 14906:2011/Cor 1:2013 ISO 18436-8:2013 Condition monitoring and diagnostics of machines -- Requirements for qualification and assessment of personnel -- Part 8: Ultrasound ISO 22514-6:2013 Statistical methods in process management -- Capability and performance -- Part 6: Process capability statistics for characteristics following a multivariate normal distribution ISO/TR 13184-1:2013 Intelligent transport systems -- Guidance protocol via personal ITS station for advisory safety systems -- Part 1: General information and use case definitions ISO/TS 13141:2010/Cor 1:2013 ISO/TS 17575-1:2010/Cor 1:2013 ISO/TS 17575-3:2011/Cor 1:2013 CEN Workshop Agreements CWA 16558:2013 Business Interoperability Interfaces for Public procurement in Europe - BII Architecture CWA 16559:2013 Business Interoperability Interfaces for Public procurement in Europe - Tender Notification CWA 16560:2013 Business Interoperability Interfaces for Public procurement in Europe - Use of profiles in the tendering process Listenummer: 4/2013 Side: 10 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CWA 16561:2013 Business Interoperability Interfaces for Public procurement in Europe - ecatalogue profiles CWA 16562:2013 Business Interoperability Interfaces for public procurement in Europe - Post award profiles Rapporter fra CEN (CR) CEN ISO/TS 13140-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 1: Test suite structure and test purposes (ISO/TS 13140-1:2011) CEN ISO/TS 13140-2:2012 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 13141 - Part 2: Abstract test suite (ISO/TS 13140-2:2012) CEN ISO/TS 13143-1:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 1: Test suite structure and test purposes (ISO/TS 13143-1:2011) CEN ISO/TS 13143-2:2011 Electronic fee collection - Evaluation of on-board and roadside equipment for conformity to ISO/TS 12813 - Part 2: Abstract test suite (ISO/TS 13143-2:2011) CEN ISO/TS 16401-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 1: Test suite structure and test purposes (ISO/TS 16401-1:2012) CEN ISO/TS 16401-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-2 - Part 2: Abstract test suite (ISO/TS 16401-2:2012) CEN ISO/TS 16403-1:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 1: Test suite structure and test purposes (ISO/TS 16403-1:2012) CEN ISO/TS 16403-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-4 - Part 2: Abstract test suite (ISO/TS 16403-2:2012) Listenummer: 4/2013 Side: 11 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS 16407-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TDS 16407-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 1: Test suite structure and test purposes (ISO/TS 16407-1:2011) CEN ISO/TS 16407-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-1 - Part 2: Abstract test suite (ISO/TS 16407-2:2012) CEN ISO/TS 16410-1:2011 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TDS 16410-1:2011) Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 1: Test suite structure and test purposes (ISO/TS 16410-1:2011) CEN ISO/TS 16410-2:2012 Electronic fee collection - Evaluation of equipment for conformity to ISO/TS 17575-3 - Part 2: Abstract test suite (ISO/TS 16410-2:2012) CEN ISO/TS 17444-1:2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS 17444-1:2012) CEN ISO/TS 17575-3:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data (ISO/TS 17575-3:2011) CEN ISO/TS 17575-4:2011 Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) Electronic fee collection - Application interface definition for autonomous systems - Part 4: Roaming (ISO/TS 17575-4:2011) CEN ISO/TS 18234-3:2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS 18234-3:2013) CEN ISO/TS 18234-11:2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS 18234-11:2013) CEN/TR 14142-2:2011 Postal Services - Address databases - Part 2: Element mapping conventions, template design considerations, address templates and rendition instructions CEN/TR 15524:2011 Postal services - Customer-directed information including track and trace - General concepts and definitions Listenummer: 4/2013 Side: 12 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN/TR 16092:2011 Electronic fee collection - Requirements for pre-payment systems Electronic fee collection - Requirements for pre-payment systems CEN/TR 16332:2012 Ikke-destruktiv prøving Tolkning av NS-EN ISO/IEC 17024 for anvendelse til sertifisering av NDT-personell Non-destructive testing - Interpretation of EN ISO/IEC 17024 for NDT personnel certification application CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 15523:2011 Posttjenester - Innleveringsbekreftelse Postal Services - Statement of mailing submission CEN/TS 16118:2012 Omsorgsboliger - Krav til tjenester som gis til eldre mennesker i omsorgsboliger Sheltered housing - Requirements for services for older people provided in a sheltered housing scheme CEN/TS 16238:2011 Postal services - Open Interface between Machine Control and Reading Coding System - MC/RC-Interface CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16331:2012 Electronic fee collection - Interoperable application profiles for autonomous systems CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail Listenummer: 4/2013 Side: 13 av 146
03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Fastsatte norske standarder NS-EN 9115:2013 Systemer for kvalitetsstyring - Krav til organisasjoner innenfor luftfart, romfart og forsvar - Leveringsklar programvare (supplement til EN 9100) Quality Management Systems - Requirements for Aviation, Space and Defense Organizations - Deliverable Software (Supplement to EN 9100) NS-EN 13850:2012 Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for prioriterte brev Postal Services - Quality of Services - Measurement of the transit time of end-to-end services for single piece priority mail and first class mail NS-EN 16271:2012 Verdistyring - Funksjonell beskrivelse av behov og ytelsesspesifikasjoner - Krav til å beskrive og validere behov som skal tilfredsstilles i innkjøps- eller anskaffelsesprosessen for et produkt Value management - Functional expression of the need and functional performance specification - Requirements for expressing and validating the need to be satisfied within the process of purchasing or obtaining a product NS-ISO 39001:2012 Styringssystemer for trafikksikkerhet - Krav med brukerveiledning Road traffic safety (RTS) management systems - Requirements with guidance for use Tilbaketrukne norske standarder NS-EN 13850:2002+A1:2007 Posttjenester - Tjenestenes kvalitet - Måling av fremsendingstid for prioriterte brev Postal service - Quality of service - Measurement of the transit time of end-to end-services for single piece priority mail and first class mail 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren 16493 Vannudersøkelse - Krav til nomenklatur for registrering av biomangfold data, taksonomiske sjekklister og taksonomiske bestemmelsesnøkler Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys Kommentarfrist: 15.04.2013 pren ISO 9308-1 rev Water quality - Enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method for waters with low bacterial background flora (ISO/DIS 9308-1:2012) Kommentarfrist: 15.04.2013 pren ISO 16140-1 rev Fôr- og nærimgsmiddelmikrobiologi Metodevalidering Del 1: Ordliste (ISO/DIS 16140-1:2013) Microbiology of food and animal feed - Method validation - Part 1: Vocabulary (ISO/DIS 16140-1:2013) Kommentarfrist: 03.06.2013 Listenummer: 4/2013 Side: 14 av 146
07 Matematikk. Naturvitenskap pren ISO 16140-2 rev Fôr- og næringsmiddelmikrobiologi Metodevalidering Del 2: Protokoll for validering av alternative (proprietære) metoder mot referansemetoder (ISO/DIS 16140-2:2013) Microbiology of food and animal feed - Method validation - Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method (ISO/DIS 16140-2:2013) Kommentarfrist: 03.06.2013 pren ISO 17468 Fôr- og næringsmiddelmikrobiologi Tekniske krav og veiledning for etablering eller revisjon av standardmetoder (ISO/DIS 17468:2013) Microbiology of food and animal feed - Technical requirements and guidance on establishment or revision of standard methods (ISO/DIS 17468:2013) Kommentarfrist: 03.06.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 9308-1 Water quality -- Enumeration of Escherichia coli and coliform bacteria -- Part 1: Membrane filtration method for waters with low bacterial background flora Kommentarfrist: 14.04.2013 ISO/DIS 9308-1 Water quality - Detection and enumeration of Escherichia coli and coliform bacteria - Part 1: Membrane filtration method (Revision of first edition (ISO 9308-1:1990) Kommentarfrist: 15.04.2013 ISO/DIS 16140-1 Microbiology of food and animal feed - Method validation -- Part 1: Vocabulary Kommentarfrist: 03.06.2013 ISO/DIS 16140-2 Microbiology of food and animal feed - Method validation -- Part 2: Protocol for the validation of alternative (proprietary) methods against a reference method Kommentarfrist: 03.06.2013 ISO-standarder ISO/TS 15216-1:2013 Microbiology of food and animal feed -- Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR -- Part 1: Method for quantification ISO/TS 15216-2:2013 Microbiology of food and animal feed -- Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR -- Part 2: Method for qualitative detection Rapporter fra CEN (CR) CEN ISO/TS 10272-3:2010/AC:2011 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) Listenummer: 4/2013 Side: 15 av 146
07 Matematikk. Naturvitenskap CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS 6579-2:2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS 6579-2:2012) CEN ISO/TS 10272-3:2010/AC:2010 Microbiology of food and animal feeding stuffs - Horizontal method for detection and enumeration of Campylobacter spp. - Part 3: Semi-quantitative method - Technical Corrigendum 1 (ISO/TS 10272-3:2010/Cor 1:2011) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS 13830:2011 Veiledning om merking av produserte nano objekter og produkter som inneholder produserte nano objekter (ISO/TS 13830:2011) Guidance on the labelling of manufactured nano-objects and products containing manufactured nano-objects (ISO/TS 13830:2011) CEN/TR 15449:2011 Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures Geographic information - Standards, specifications, technical reports and guidelines, required to implement Spatial Data Infrastructures CEN/TR 15449-1:2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR 15449-2:2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR 15449-3:2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TS 15518-4:2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment Listenummer: 4/2013 Side: 16 av 146
07 Matematikk. Naturvitenskap CEN/TS 15634-2:2012 Næringsmidler - Påvisning av matallergener med molekylærbiologiskemetoder - Del 2: Selleri (Apium graveolens) - Kvalitative fastsettelse av en bestemt DNA sekvens i kokte pølser ved real-time PCR Foodstuffs - Detection of food allergens by molecular biological methods - Part 2: Celery (Apium graveolens) - Qualitative determination of a specific DNA sequence in cooked sausages by real-time PCR 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO 11607-1:2009/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 1: Krav til materialer, sterile barrieresystemer og emballasjesystemer - Endringsblad 1 (ISO 11607-1:2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 1: Requirements for materials, sterile barrier systems and packaging systems - Amendment 1 (ISO 11607-1:2006/DAM 1:2013) Kommentarfrist: 07.08.2013 EN ISO 11607-2:2006/prA1 Emballasje for sluttsterilisert medisinsk utstyr - Del 2: Krav til formgiving, forsegling og sammensetting - Endringsblad 1 (ISO 11607-2:2006/DAM 1:2013) Packaging for terminally sterilized medical devices - Part 2: Validation requirements for forming, sealing and assembly processes - Amendment 1 (ISO 11607-2:2006/DAM 1:2013) Kommentarfrist: 07.08.2013 FprEN ISO 10993-3 rev Biologisk evaluering av medisinsk utstyr - Del 3: Prøvingsmetoder for gentoksisitet, karsinogenisitet og reproduksjonstoksisitet Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO/DIS 10993-3:2011) Kommentarfrist: 07.04.2013 pren 1422 rev Sterilisatorer for medisinsk utstyr - Etylenoksidsterilisatorer - Krav og prøvingsmetoder Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods Kommentarfrist: 13.04.2013 pren 1422 rev Sterilisatorer for medisinsk utstyr - Etylenoksidsterilisatorer - Krav og prøvingsmetoder Sterilizers for medical purposes - Ethylene oxide sterilizers - Requirements and test methods Kommentarfrist: 13.04.2013 pren 13718-1 Ambulanser og ambulanseutstyr - Luftambulanser - Del 1: Krav til medisinsk utstyr i luftambulanser Medical vehicles and their equipment - Air ambulances - Part 1: Requirements for medical devices used in air ambulances Kommentarfrist: 07.07.2013 pren 16372 Estetisk kirurgi tjenester Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 Listenummer: 4/2013 Side: 17 av 146
11 Helsevesen, Teknikk pren 16372 Aesthetic surgery and aesthetic non-surgical medical services Kommentarfrist: 07.07.2013 pren ISO 8836 rev Sugekatetere for bruk i luftveiene (ISO/DIS 8836:2013) Suction catheters for use in the respiratory tract (ISO/DIS 8836:2013) Kommentarfrist: 24.06.2013 pren ISO 9173-3 Dentistry - Extraction forceps - Part 3: Design and dimensions (ISO/DIS 9173-3:2013) Kommentarfrist: 07.07.2013 pren ISO 10343 rev Oftalmiske instrumenter - Oftalmometre (ISO/DIS 10343:2012) Ophthalmic instruments - Ophthalmometers (ISO/DIS 10343:2012) Kommentarfrist: 06.05.2013 pren ISO 10993-3 Biologisk evaluering av medisinsk utstyr - Del 3: Prøvingsmetoder for gentoksisitet, karsinogenisitet og reproduksjonstoksisitet (ISO/DIS 10993-3:2011) Biological evaluation of medical devices - Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity (ISO/DIS 10993-3:2011) Kommentarfrist: 07.04.2013 pren ISO 16635-2 Dentistry - Dental rubber dam technique - Part 2: Clamp forceps (ISO/DIS 16635-2:2012) Kommentarfrist: 06.05.2013 pren ISO 24234 rev Tannpleie - Dental amalgam (ISO/DIS 24234:2013) Dentistry - Dental amalgam (ISO/DIS 24234:2013) Kommentarfrist: 10.06.2013 Standardforslag til høring - internasjonale (ISO) ISO 11607-1:2006/DAmd 1 Kommentarfrist: 07.08.2013 ISO 11607-2:2006/DAmd 1 Kommentarfrist: 07.08.2013 ISO/DIS 7494-2 Dental units - Part 2: Air and water supply systems Kommentarfrist: 21.08.2013 Listenummer: 4/2013 Side: 18 av 146
11 Helsevesen, Teknikk ISO/DIS 8836 Suction catheters for use in the respiratory tract Kommentarfrist: 24.06.2013 ISO/DIS 9173-3 Dentistry -- Extraction forceps -- Part 3: Design and dimensions Kommentarfrist: 07.07.2013 ISO/DIS 10343 Optics and optical instruments - Ophthalmic instruments - Ophthalmometers Kommentarfrist: 06.05.2013 ISO/DIS 10343 Ophthalmic instruments -- Ophthalmometers Kommentarfrist: 05.05.2013 ISO/DIS 10993-3.2 Biological evaluation of medical devices -- Part 3: Tests for genotoxicity, carcinogenicity and reproductive toxicity Kommentarfrist: 07.04.2013 ISO/DIS 12891-2 Retrieval and analysis of surgical implants -- Part 2: Analysis of retrieved surgical implants Kommentarfrist: 07.07.2013 ISO/DIS 12891-2 Implants for surgery - Retrieval and analysis of surgical implants - Part 2: Analysis of retrieved metallic surgical implants Kommentarfrist: 07.05.2013 ISO/DIS 16635-2 Dentistry -- Dental rubber dam technique -- Part 2: Clamp forceps Kommentarfrist: 06.05.2013 ISO/DIS 16840-3 Wheelchair seating -- Part 3: Postural support devices -- Measurement of static, impact and repetitive load strengths Kommentarfrist: 15.04.2013 ISO/DIS 16840-3 Wheelchair seating -- Part 3: Determination of static, impact and repetitive load strengths for postural support devices Kommentarfrist: 14.06.2013 ISO/DIS 17218 Sterile acupuncture needles for single use Kommentarfrist: 11.06.2013 Listenummer: 4/2013 Side: 19 av 146
11 Helsevesen, Teknikk ISO/DIS 24234 Tannpleie - Kvikksølv og metallpulver for dental amalgam. Dentistry -- Mercury and alloys for dental amalgam Kommentarfrist: 10.06.2013 ISO/DIS 24234 Dentistry -- Dental amalgam Kommentarfrist: 09.06.2013 ISO-standarder ISO 5838-1:2013 Implants for surgery -- Metallic skeletal pins and wires -- Part 1: General requirements Erstatter A00008:20:021771 ISO 5840-3:2013 Cardiovascular implants -- Cardiac valve prostheses -- Part 3: Heart valve substitutes implanted by transcatheter techniques ISO 7396-1:2007/Amd 3:2013 Terminology relating to alarm systems ISO 8600-1:2013 Endoscopes -- Medical endoscopes and endotherapy devices -- Part 1: General requirements Erstatter A00008:20:039935 ISO 10524-3:2005/Amd 1:2013 Filtration and information to be supplied by the manufacturer ISO/PAS 18761:2013 Use and handling of medical devices covered by the scope of ISO/TC 84 -- Risk assessment on mucocutaneous blood exposure Rapporter fra CEN (CR) CEN ISO/TR 22411:2011 Ergonomiske data og retningslinjer for bruk av ISO/IEC Guide 71 i forbindelse med produkter og tjenester som skal møte behovene til eldre personer og personer med nedsatt funksjonsevne (ISO/TR 22411:2008) Ergonomics data and guidelines for the application of ISO/IEC Guide 71 to products and services to address the needs of older persons and persons with disabilities (ISO/TR 22411:2008) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) Listenummer: 4/2013 Side: 20 av 146
11 Helsevesen, Teknikk Fastsatte norske standarder NS-EN ISO 5361:2012/AC:2012 Rettelsesblad AC - Anestesi- og respirasjonsutstyr - Trakealtuber og koblingsstykker - Teknisk rettelsesblad 1 (ISO 5361:2012/Cor 1:2012) Corrigendum AC - Anaesthetic and respiratory equipment - Tracheal tubes and connectors - Technical Corrigendum 1 (ISO 5361:2012/Cor 1:2012) NS-EN ISO 10341:2012 Oftalmiske instrumenter - Foroptere (ISO 10341:2012) Ophthalmic instruments - Refractor heads (ISO 10341:2012) NS-EN ISO 11979-3:2012 Oftalmiske implantater - Intraokulære linser - Del 3: Mekaniske egenskaper og prøvingsmetoder (ISO 11979-3:2012) Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2012) NS-EN ISO 14630:2012 Ikke-aktive kirurgiske implantater - Generelle krav (ISO 14630:2012) Non-active surgical implants - General requirements (ISO 14630:2012) NS-EN ISO 16256:2012 Klinisk laboratorieprøving og in vitro-diagnostiske prøvingssystemer - Referansemetode for prøving av in vitro-aktivitet i antimikrobielle midler mot gjærsopp som forårsaker infeksjonssykdommer (ISO 16256:2012) Clinical laboratory testing and in vitro diagnostic test systems - Reference method for testing the in vitro activity of antimicrobial agents against yeast of fungi involved in infectious diseases (ISO 16256:2012) NS-EN ISO 18369-2:2012 Oftalmisk optikk - Kontaktlinser - Del 2: Toleranser (ISO 18369-2:2012) Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2012) NS-EN ISO 22665:2012 Oftalmisk optikk og oftalmiske instrumenter - Instrumenter for å måle aksiale avstander i øyet (ISO 22665:2012) Ophthalmic optics and instruments - Instruments to measure axial distances in the eye (ISO 22665:2012) NS-EN ISO 25539-2:2012 Kardiovaskulære implantater - Endovaskulært utstyr - Del 2: Vaskulære stent (ISO 25539-2:2012) Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2012) NS-EN ISO 80601-2-13:2012 Medisinsk elektrisk utstyr - Del 2-13: Spesielle krav til grunnleggende sikkerhet og vesentlig ytelse for anestesiapparater (ISO 80601-2-13:2011) Medical electrical equipment - Part 2-13: Particular requirements for basic safety and essential performance of an anaesthetic workstation (ISO 80601-2-13:2011) Listenummer: 4/2013 Side: 21 av 146
11 Helsevesen, Teknikk Tilbaketrukne norske standarder NS-EN 1782:1998+A1:2009 Trakealtuber og tilpasningsstykker Tracheal tubes and connectors NS-EN ISO 8835-2:2009 Systemer for inhalasjonsanestesi - Del 2: Anestetiske pustesystemer (ISO 8835-2:2007) Inhalational anaesthesia systems - Part 2: Anaesthetic breathing systems (ISO 8835-2:2007) NS-EN ISO 8835-3:2009 Systemer for inhalasjonsanestesi - Del 3: Overførings- og opptakssystemer i aktive systemer for fjerning av anestesigass (ISO 8835-3:2007) Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007) NS-EN ISO 8835-3:2009/A1:2010 Endringsblad A1 - Systemer for inhalasjonsanestesi - Del 3: Overførings- og opptakssystemer i aktive systemer for fjerning av anestesigass (ISO 8835-3:2007/AMD 1:2010) Amendment A1 - Inhalational anaesthesia systems - Part 3: Transfer and receiving systems of active anaesthetic gas scavenging systems (ISO 8835-3:2007/AMD 1:2010) NS-EN ISO 8835-4:2009 Systemer for inhalasjonsanestesi - Del 4: Fordampere for anestesimidler (ISO 8835-4:2004) Inhalational anaesthesia systems - Part 4: Anaesthetic vapour delivery devices (ISO 8835-4:2004) NS-EN ISO 8835-5:2009 Systemer for inhalasjonsanestesi - Del 5: Anestesiventilatorer (ISO 8835-5:2004) Inhalational anaesthesia systems - Part 5: Anaesthetic ventilators (ISO 8835-5:2004) NS-EN ISO 10341:2009 Øyeoptiske instrumenter - Foroptere (ISO 10341:2009) Ophthalmic instruments - Refractor heads (ISO 10341:2009) NS-EN ISO 11979-3:2006 Oftalmiske implantater - Intraokulære linser - Del 3: Mekaniske egenskaper og prøvingsmetoder (ISO 11979-3:2006) Ophthalmic implants - Intraocular lenses - Part 3: Mechanical properties and test methods (ISO 11979-3:2006) NS-EN ISO 14630:2009 Ikke-aktive kirurgiske implantater - Generelle krav (ISO 14630:2008) Non-active surgical implants - General requirements (ISO 14630:2008) Listenummer: 4/2013 Side: 22 av 146
11 Helsevesen, Teknikk NS-EN ISO 18369-2:2006 Oftalmisk optikk - Kontaktlinser - Del 2: Toleranser (ISO 18369-2:2006) Ophthalmic optics - Contact lenses - Part 2: Tolerances (ISO 18369-2:2006) NS-EN ISO 25539-2:2009 Kardiovaskulære implantater - Endovaskulært utstyr - Del 2: Vaskulære stent (ISO 25539-2:2008) Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2008) NS-EN ISO 25539-2:2009/AC:2011 Rettelsesblad AC - Kardiovaskulære implantater - Endovaskulært utstyr - Del 2: Vaskulære stent (ISO 25539-2:2008) Corrigendum AC - Cardiovascular implants - Endovascular devices - Part 2: Vascular stents (ISO 25539-2:2008) 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren 353-1 rev Personal fall protection equipment - Guided type fall arresters including an anchor line - Part 1: Guided type fall arresters including a rigid anchor line Kommentarfrist: 15.04.2013 pren 469 rev Vernetøy for brannmannskap - Krav og prøvingsmetoder til vernetøy ved brannslukking Protective clothing for firefighters - Requirements and test methods for protective clothing for firefighting Kommentarfrist: 10.05.2013 pren 469 Vernetøy for brannmannskap - Ytelseskrav til vernetøy for brannslokking Protective clothing for firefighters - Performance requirements for protective clothing for firefighting Kommentarfrist: 10.05.2013 pren 1021-1 rev Møbler - Vurdering av antennelighet for stoppede møbler - Del 1: Antenning fra ulmende sigarett Furniture - Assessment of the ignitability of upholstered furniture - Part 1: Ignition source smouldering cigarette Kommentarfrist: 29.04.2013 pren 1021-2 rev Møbler - Vurdering av antennelighet for stoppede møbler - Del 2: Antenning fra fyrstikkflamme eller tilsvarende Furniture - Assessment of the ignitability of upholstered furniture - Part 2: Ignition source match flame equivalent Kommentarfrist: 29.04.2013 pren 1263-1 Sikkerhetsnett - Del 1: Sikkerhetskrav, prøvingsmetoder Safety nets - Part 1: Safety requirements, test methods Kommentarfrist: 29.04.2013 Listenummer: 4/2013 Side: 23 av 146
13 Miljøvern. Helsevern. Sikkerhet pren 1263-2 Sikkerhetsnett - Del 2: Sikkerhetskrav ved plassering Safety nets - Part 2: Safety requirements for the positioning limits Kommentarfrist: 29.04.2013 pren 1365-2 Prøving av brannmotstanden til bærende bygningsdeler - Del 2: Gulv og tak Fire resistance tests for loadbearing elements - Part 2: Floors and roofs Kommentarfrist: 22.04.2013 pren 14432 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Product discharge and air inlet valves Kommentarfrist: 21.07.2013 pren 14433 Tanks for the transport of dangerous goods - Tank equipment for the transport of liquid chemicals and liquefied gases - Foot valves Kommentarfrist: 14.07.2013 pren 15346 Plast - Resirkulert plast - Karakterisering av returmateriale i polyvinylklorid (PVC) Plastics - Recycled plastics - Characterisation of poly(vinyl chloride) (PVC) recyclates Kommentarfrist: 21.07.2013 pren 15348 Plast - Resirkulert plast - Karakterisering av returmateriale i polyetylen tereftalat (PET) Plastics - Recycled plastics - Characterisation of poly(ethylene terephthalate) (PET) recyclates Kommentarfrist: 21.07.2013 pren 16493 Vannudersøkelse - Krav til nomenklatur for registrering av biomangfold data, taksonomiske sjekklister og taksonomiske bestemmelsesnøkler Water quality - Nomenclatural requirements for the recording of biodiversity data, taxonomic checklists and keys Kommentarfrist: 15.04.2013 pren 16502 Test method for the determination of the degree of soil acidity according to Baumann-Gully Kommentarfrist: 15.04.2013 pren 16503 Vannundersøkelse - Veiledning for å vurdere hydromorfologiske egenskaper til brakkvann og kystvann Water quality - Guidance standard on assessing the hydromorphological features of transitional and coastal waters Kommentarfrist: 15.04.2013 pren 16522 Tanks for transport of dangerous goods - Service equipment for tanks - Flame arresters for venting systems Kommentarfrist: 03.06.2013 Listenummer: 4/2013 Side: 24 av 146
13 Miljøvern. Helsevern. Sikkerhet pren 16523-1 Bestemmelse av materialers motstand mot gjennomtrenging av kjemikalier Del 1: Gjennomtrenging av flytende kjemikalier som er i kontinuerlig kontakt med materialer Determination of material resistance to permeation by chemicals - Part 1: Permeation by liquid chemical under conditions of continuous contact Kommentarfrist: 10.06.2013 pren 16574 Protective clothing - Protection against liquid chemicals - Performance requirements for chemical protective clothing with liquidtight connections between different parts of the clothing for emergency teams (Type 3 ET Equipment) Kommentarfrist: 07.08.2013 pren 16575 Bio-based products - Vocabulary Kommentarfrist: 07.08.2013 pren ISO 4126-6 Sikkerhetsutstyr for beskyttelse mot overtrykk - Del 6: Bruk, valg og installasjon av sprengskiver (ISO/DIS 4126-6:2013) Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices (ISO/DIS 4126-6:2013) Kommentarfrist: 07.07.2013 pren ISO 9241-391 Ergonomics of Human System Interaction - Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures (ISO/DIS 9241-391:2012) Kommentarfrist: 29.04.2013 pren ISO 17184 Soil quality - Determination of carbon and nitrogen by near infrared spectrometry (ISO/DIS 17184:2013) Kommentarfrist: 30.06.2013 Standardforslag til høring - internasjonale (ISO) ISO/DIS 4126-6 Safety devices for protection against excessive pressure - Part 6: Application, selection and installation of bursting disc safety devices Kommentarfrist: 07.07.2013 ISO/DIS 5667-6 Water quality -- Sampling -- Part 6: Guidance on sampling of rivers and streams Kommentarfrist: 06.04.2013 ISO/DIS 5667-6 Water quality -- Sampling -- Part 6: Guidance on sampling of rivers and streams Kommentarfrist: 05.06.2013 Listenummer: 4/2013 Side: 25 av 146
13 Miljøvern. Helsevern. Sikkerhet ISO/DIS 8672 Air quality -- Determination of the number concentration of airborne inorganic fibres by phase contrast optical microscopy -- Membrane filter method Kommentarfrist: 08.05.2013 ISO/DIS 9241-391 Ergonomics of Human System Interaction -- Part 391: Requirements, analysis and compliance test methods for the reduction of photosensitive seizures Kommentarfrist: 29.04.2013 ISO/DIS 14046 Environmental management -- Water footprint -- Principles, requirements and guidelines Kommentarfrist: 11.06.2013 ISO/DIS 14388-1 Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 1: Introduction and definitions, symbols and acronyms, sampling and sample preparation Kommentarfrist: 29.04.2013 ISO/DIS 14388-2 Soil quality - Acid-base accounting procedure for acid sulfate soils -- Part 2: Chromium reducible sulfur (CRS) methodology Kommentarfrist: 29.04.2013 ISO/DIS 14787 Protective clothing -- Determination of resistance to penetration by sprayed liquid chemicals, emulsions and dispersions -- Atomizer test Kommentarfrist: 21.05.2013 ISO/DIS 16308 Water quality -- Determination of glyphosate and AMPA -- Method using high performance liquid chromatography (HPLC) with tandem mass spectrometric detection Kommentarfrist: 04.05.2013 ISO/DIS 17184 Soil quality -- Determination of carbon and nitrogen by near infrared spectrometry Kommentarfrist: 30.06.2013 ISO-standarder ISO 340:2013 Conveyor belts -- Laboratory scale flammability characteristics -- Requirements and test method Erstatter A00008:20:038500 ISO 7240-24:2010/Amd 1:2013 ISO/TR 16732-3:2013 Fire safety engineering -- Fire risk assessment -- Part 3: Example of an industrial property Listenummer: 4/2013 Side: 26 av 146
13 Miljøvern. Helsevern. Sikkerhet ISO/TS 13447:2013 Fire safety engineering -- Guidance for use of fire zone models Rapporter fra CEN (CR) CEN ISO/TS 15011-6:2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS 15011-6:2012/Cor 1:2012) CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) CEN ISO/TR 7250-2:2011 Basale kroppsmål for teknologisk design Del 2: Statistisk oppsummering av kroppsmål for individuelle ISO populasjoner (ISO/TR 7250-2:2010) Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from individual ISO populations (ISO/TR 7250-2:2010) CEN ISO/TR 9241-100:2011 Ergonomi for samhandling mellom menneske og system Del 100: Innføring i standarder relatert til software-ergonomi (ISO/TR 9241-100:2010) Ergonomics of human-system interaction - Part 100: Introduction to standards related to software ergonomics (ISO/TR 9241-100:2010) CEN ISO/TS 15011-6:2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS 15011-6:2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS 15011-6:2012) CEN/TR 1317-6:2012 Skadereduserende vegtiltak - Del 6: Fotgjengerrekkverk / Road restraint systems - Part 6: Pedestrian restraint system, Pedestrian Parapet Road restraint systems - Part 6: Pedestrian restraint system - Pedestrian parapets CEN/TR 15642:2011 Ensartede prøvingsprosedyrer for prøvinger etter EN 3-7:2004+A1:2007 Unified tests procedures for the tests of EN 3-7:2004+A1:2007 CEN/TR 16013-3:2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16130:2011 Karakterisering av avfall - På stedet verifikasjon Characterization of waste - On-site verification Listenummer: 4/2013 Side: 27 av 146