ATS22C11Q Mykstarter 110 A V

Produktdatablad Karakteristikk ATS22C11Q Mykstarter 110 A 230-440 V Alternativer Monteringsmåte Mulige funksjoner Spenningsgrenser Hovedkarakteristikk Produktspekter Altistart 22 Produkt eller komponent type Produsert i Produktspesifikk applikasjon Type komponent Antall faser Mykstarter Asynkrone motorer Pumper og vifter ATS22 3 faser [Us] merkespenning 230...440 V - 15...10 % Motoreffekt kw Fabrikkinnstilt strøm Effekttap i W Driftskategori 39 kw 230 V 55 kw 400 V 55 kw 440 V 100 A 73 W for standard applications AC-53A Type of start Start med momentkontroll (strøm begrenset til 3,5 In) IcL starter, nominell effekt IP-grad Med kjølelegeme Intern forbikopler 195...484 V Nettfrekvens 50...60 Hz - 10...10 % Båndbredde Tilkopling av utstyr Styrespenning Kontrollkretsforbruk Discrete output number 2 Digitale utganger Minimum brytestrøm Maximum svitsjestrøm Discrete input number 3 Discrete input type Discrete input voltage Diskrét inngangs logikk Utgangsstrøm PTC-sensorinngang Kommunikasjonsprotokoll Type konnektor Kommunikasjonsdatalink Fysisk interface Transmission rate Installert utstyr 31 45...66 Hz I motorforsyningsledningen Til motordeltaterminaler 230 V -15...10 % 50/60 Hz 20 W 110 A connection in the motor supply line for standard applications IP20 Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O 100 ma 12 V DC relay outputs 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs Logic LI1, LI2, LI3 5 ma 4.3 kohm 24 V <= 30 V Positive logic LI1, LI2, LI3 < 5 V and <= 2 ma > 11 V >= 5 ma 0.4...1 Icl Justrbar 750 Ohm Modbus 1 RJ45 Serie RS485 flerpunkt 4800, 9600 eller 19200 bps 1 / 8 &nbspinformasjonen i denne dokumentasjonen inneholder generelle beskrivelser og / eller tekniske egenskaper ved ytelsen til produktene heri. Denne dokumentasjonen er ikke tenkt som en erstatning for, og skal ikke brukes til avgjørelse for egnethet eller pålitelighet av disse produktene til spesifikke brukerapplikasjoner. Det er brukers eller integrators plikt til å foreta den nødvendige og fullstendige risikoanalyse, evaluering og utprøving av produkter med hensyn til den relevante spesifikke anvendelse eller bruk. Hverken Schneider Electric Industries SAS, eller noen av de tilknyttede selskaper eller datterselskaper er ansvarlig for, eller hefter for misbruk av inneværende opplysninger.

Beskyttelsestype Merking Kjølemetode Driftsposisjon Høyde Bredde Dybde Vekt Effektområdet Motor starter typen Thermal protection Motor Phase failure line Thermal protection starter CE Tvangsstyrt konveksjon Vertikal +/- 10 grader 356 mm 150 mm 229.5 mm 18 kg 30...50 kw at 200...240 V 3 phases 55...100 kw at 380...440 V 3 phases Myk starter Miljø elektromagnetisk kompatibilitet Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5 standarder EN/IEC 60947-4-2 produktsertifikater CCC CSA C-Tick GOST UL Vibrasjonsmotstand 1 gn 13...200 Hz EN/IEC 60068-2-6 1.5 mm 2...13 Hz EN/IEC 60068-2-6 støtmotstand 15 gn 11 ms EN/IEC 60068-2-27 støynivå 56 db Forurensninggrad Level 2 IEC 60664-1 relativ fuktighet 0...95 % without condensation or dripping water EN/IEC 60068-2-3 omgivelsestemperatur for drift omgivelsestemperatur for lagring -25...70 C operating altitude -10...40 C uten lastreduksjon > 40...< 60 C med strømlastreduksjon på 2,2 % per C <= 1000 m uten lastreduksjon > 1000...< 2000 m med strømlastreduksjon på 2,2 % per ytterligere 100 m Bærekraftig Bærekraftig RoHS (datokode: YYWW) REACh Produktets miljøprofil Destruksjons-instruks Green Premium produkt Compliant - since 0938 - Schneider Electric declaration of conformity Reference not containing SVHC above the threshold Tilgjengelig Tilgjengelig Contractual warranty Warranty period 18 måneder Frame Size C Dimensions 2 / 8

Precautions Standards The Altistart 22 soft starter is compliant with pollution Degree 2 as defined in NEMA ICS1-1 or IEC 60664-1. For environment pollution degree 3, install the Altistart 22 soft starter inside a cabinet type 12 or IP54. Air Circulation DANGER HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH ATS22 soft starters are open devices and must be mounted in a suitable enclosure. Failure to follow these instructions will result in death or serious injury. Leave sufficient free space to help the air required for cooling purposes to circulate from the bottom to the top of the unit. Overheating To avoid the soft starter to overheat, respect the following recommendations: Mount the Altistart 22 Soft Starter within ± 10 of vertical. Do not locate the Altistart 22 Soft Starter near heat radiating elements. Electrical current through the Altistart 22 Soft Starter will result in heat losses that must be dissipated into the ambient air immediately surrounding the soft starter. To help prevent a thermal fault, provide sufficient enclosure cooling and/or ventilation to limit the ambient temperature around the soft starter. 3 / 8

If several soft starters are installed in a control panel, arrange them in a row. Do not stack soft starters. Heat generated from the bottom soft starter can adversely affect the ambient temperature around the top soft starter. Mounting Connection Between the Fan and the Altistart 22 Soft Starter 1 Altistart 22 Soft Starter 2 Fan Wall mounted or Floor-standing Enclosure with IP 23 Degree of protection Introduction To help proper air circulation in the soft starter, grilles and forced ventilation can be installed. Ventilation Grilles Forced Ventilation Unit Power Terminal Bar Style 4 / 8

Power supply and output to motor Bar b 20 mm (0.79 in) a Bolt Cable and protective cover Size Gauge Protective cover Tightening torque 5 mm (0.2 in) M8 (0.31 in) 95 mm² 250 MCM LA9F702 18 N.m 157.5 lb.in Power connections, minimum required wiring section IEC cable mm² (Cu 70 C/158 F) (1) UL cable AWG (Cu 75 C/167 F) (1) 35 1/0 230 Vac control, logic Inputs (LI) 24 Vdc, 3-wire control With Line Contactor, Freewheel or Controlled Stop 230 Vac control, logic Inputs (LI) 24 Vdc, 2-wire control,freewheel stop 5 / 8

Connection in the motor delta winding in series with each winding Wiring ATS22 soft starters connected to motors with the delta connections can be inserted in series in the motor windings. The following wiring requieres particular attention. It is documented in the Altistart 22 Soft start - soft stop unit user manual. Please contact Schneider Electric commercial organisation for further informations. Example A 400 V - 110 kw motor with a line current of 195 A (nominal current for the delta connection). The current in each winding is equal to 195/1.5 or 130 A. The rating is determined by selecting the soft starter with a permanent nominal current (ICL) just above this current. Motor Thermal Protection - Cold Curves Curves 6 / 8

A Class 10 B Class 20 C Class 30 Trip time for a Standard Application (Class 10) 32 s Trip time for a Severe Application (Class 20) 63 s Trip time for a Severe Application (Class 30) 95 s Motor Thermal Protection - Warm Curves Curves 7 / 8

A Class 10 B Class 20 C Class 30 Trip time for a Standard Application (Class 10) 16 s Trip time for a Severe Application (Class 20) 32 s Trip time for a Severe Application (Class 30) 48 s 8 / 8