HERMES Q2. The slim one. The universal one. The wide one. Sample applications Label printer HERMES Q6.3

Transkript

1 4 HERMES Q 1.1 The slim one Label printer HERMES Q The universal one Label printer HERMES Q4.3 HERMES Q The wide one Label printer HERMES Q Sample applications

2 5 Label rolls Directions to which dispense labels right Orientations of assembly horizontal

3 6 HERMES Q in detail Operation panel Ribbon holder Rugged metal chassis Applicator Pressing plungers image. Print head Print roller Label unwinder Liner rewinder Pulling system Label sensor Accurate imprint

4 7 Print heads Units of the same width are interchangeable. They are detected by the CPU automatically and calibrated. The print distance to the locating edge can be adjusted. Major data such as the operational performance, Print heads provided for HERMES Q2, HERMES Q4-300, 600 dpi Print heads provided for HERMES Q4.3, HERMES Q , 300 dpi Print rollers 2.10 Two types of materials: Print rollers DR Print rollers DRS Interfaces Slot to insert a SD memory card 2 USB hosts USB 2.0 Hi-Speed Ethernet 10/100 Mbit/s RS232C Digital I/O interface; PNP inputs PNP, NPN outputs position 2 port Ethernet switch 10/100 Mbit/s

5 8 Operation panel Self-explanatory symbols are on display. The device can thus Landscape or portrait display, depending from the orientation of assembly LED: Status bar: Printer status: USB slot Operation Jump to menu Printer rotated by 90 Setup options Print parameters Print speeds Video tutorials External operation panel. 1 Same functionality as on the printer Landscape or portrait mode 3 1 LED: 2 USB port 3 Connecting USB cable for power supply 2

6 9 Accessories Accessorial products are plugged or screwed to a printer by the customer Pos. Designation roll Ø HERMES Q2 HERMES Q4.3 HERMES Q4 HERMES Q SD memory card Warning light SD memory card USB memory stick USB WLAN stick hotspot or infrastructure mode USB WLAN stick including a rod antenna hotspot or infrastructure mode USB Bluetooth adapter Product sensor, 3 pins Product sensor, 25 pins I/O interface connector SUB-D, 25 pins External operation panel Same functionality as on the printer Landscape or portrait mode operation panel or on the printer connecting USB cables for power supply. Label selection - I/O box Hand switch TR2 1 Warning light indicated on the display of a printer, states are signalled. Yellow 2.13 Foot switch Connecting RS232 C cable Scanner CC200

7 10 Options are parts or units to perform special functions. They are assembled to a printer in addition to or instead of standards. Pos. Designation roll Ø HERMES Q2 HERMES Q4.3 HERMES Q4 HERMES Q Spacers 3.6 Margin stop Draw roller ZS If order implies options be assembled ex factory, the part numbers of such printers and options are added by.250. Options delivered separately are added by.001. Automatic ribbon saving Use is recommended in cases of at least 60 mm unprinted area 3.2 Label unwinder K Adapter 40/50. Adapter 76/100. Spacers wound on a roll or a reel. from the middle wall with spacers. 3.6 Margin stop 10

8 11 Options Cover Print head pressure system, reduced force Thermal direct printing only 3.10 Print roller DRS 3.11 Antistatic brush 3.12 Draw roller ZS port Ethernet switch 10/100 Mbit/s Signals are looped through.

9 12 Technical data typical standard option Label printer type HERMES Q2 HERMES Q4.3 HERMES Q4 HERMES Q6.3 Thermal transfer Thermal direct up to mm/s /1.6 1/1 1/1 0.2/0.2 Materials on a roll on a reel Width mm from mm 3 6 Thickness up to mm Liner tape Width if operating a roll mm Width if operating a reel or a roll mm Thickness up to mm up to mm reel diameter up to mm mm Winding outside or inside mm outside or inside up to mm mm Length up to m 600 Width mm Printer dimensions and weights Width mm Depth Weight 20 Label sensor indicating positions detecting Sensor distance to the locating edge standard mm Material passage mm 2 Electronics Interfaces

10 13 Technical data standard option Operating data Voltage Temperature / humidity Stock Transport Operation panel Screen diagonal " Setup options Status bar Time Monitoring Material ending Material ending head Temperature open Test routines System diagnostics Status printout Test grid print test, analysis Monitor mode Status reports e.g. durations of printing and hours in operation Fonts TrueType fonts Latin Thai Fonts Vector / TrueType fonts Graphics Codes 2D and stacked codes Zoom factors 2 to 10 lines, arrows, rectangles, circles, ellipses Dotcode are options depending from the code type. Windows JScript printer language

11 14 cablabel S3 software Design, print, administrate other features. The designer user interface and the JScript code Stand-alone printing is disconnected from a host. OPC UA

12 15 Printer control Printer administration Drivers Windows drivers Mac OS X drivers Linux drivers Programming JScript abc Basic Compiler Database Connector Integration Printer Vendor Program are collected. Step 1 Step 2 Step 3 Take the replace

13 16 Applicators applicators, using transfer modules to roll, Long product life Products of variable heights Protective chassis is a standard to protect the cylinder Highly reliable processes so can stroke speed. Sensor control Label application Pressure-reducing valve the stroke cylinder to a product. Pivoting applicator

14 17 Applicators and transfer modules Overview Applicators Labels are transferred using a Universal pad Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad Form pad Universal pad, spring-mounted Tamp-on pad, spring-mounted Roll-on pad Corner-wrap pad Vacuum belt Demand module HERMES Q Template Swing applicator F F F Product marking F F F Stroke applicator 4116 F F F Stroke turn applicator F F F Stroke applicator F F F Swing stroke applicator Flag applicator 4712 Front side applicator Package marking 4014 F Stroke applicator 4016 Stroke blow applicator 4614 Demand module Vacuum belt applicator Air jet box L-200 F Type L R

15 18 Product marking Swing applicator 3214 Accessories Blow tube Unit to regulate compressed air Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad to the surface of a product. Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad Technical data 3214 L/R 11 F 3214 L/R 12 F 3214 L/R 61 F 3214 L/R 2100 State of a product at rest in motion mm Linear guidance, horizontal mm 30 Depth of a pad immersing

16 19 Product marking Stroke applicators 4114, 4116 Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad to the surface of a product. Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad Technical data 4114, 4116 L/R 11 F 4114, 4116 L/R 12 F 4114, 4116 L/R 61 F 4114 L/R 2100 mm mm State of a product at rest from the top from the side uniform Short stroke cylinder, horizontal mm 10 using a cylinder stroke of 200 up to mm 300 up to mm up to mm

17 20 Product marking Stroke applicators 4114, 4116 Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Form pad Form pad Technical data 4114, 4116 L/R 8800 mm State of a product at rest from the top from the side Short stroke cylinder, horizontal mm 10 using a cylinder stroke 200 up to mm 300 up to mm 20

18 21 Product marking Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad to the surface of a product. Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Blow-on pad Technical data 4214 L/R 11 F 4214 L/R 12 F 4214 L/R 61 F 4214 L/R 2100 mm mm State of a product at rest from the top from the side uniform using a cylinder stroke of 200 up to mm 300 up to mm up to mm 20

19 22 Product marking Stroke applicator 4414 Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Tamp-on pad Tamp-on pad, providing a damping layer Tamp-on pad, providing a label stop Technical data 4414 L/R 11 F 4414 L/R 12 F 4414 L/R 61 F mm mm State of a product at rest from the top from the side Short stroke cylinders, horizontal direction y mm using a cylinder stroke of 200 up to mm 300 up to mm up to mm

20 23 Product marking Swing stroke applicator 4514 Accessories Blow tube Unit to regulate compressed air Blow-on pad Blow-on pad Technical data 4514 L/R 2100 mm 60 State of a product at rest from the top from the side using a cylinder stroke of 200 up to mm 300 up to mm 20

21 24 Product marking Flag applicator 4712 Accessories Blow tube Unit to regulate compressed air front side Ø L P >60 4) P Form pad Technical data 4712 L Diameter mm 16 State of a product at rest from the top calculated using a print speed of 100 mm/s from the side at least mm using a cylinder stroke of 300 up to mm 260 Depth of pliers immersing mm 1.0

22 25 Package marking Front side applicators 3014, 3016 Accessories Blow tube Unit to regulate compressed air iot angles 0 0 Tamp-on pad Tamp-on pad, spring-mounted Blow-on pad Tamp-on pad Tamp-on pad, spring-mounted Blow-on pad Technical data 3014, 3016 L/R , 3016 L/R L/R mm State of a package at rest in motion from the top from the side from the front mm

23 26 Package marking Stroke applicators 4014, 4016 pad returned to its initial position. The length of the stroke cylinder Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Tamp-on pad Universal pad using a punching tool. Tamp-on pad, spring-mounted Universal pad, spring-mounted Tamp-on pad Universal pad Tamp-on pad, spring-mounted Universal pad, spring-mounted Technical data 4014, 4016 L/R 11 F 4014 L/R , 4016 L/R L/R / State of a package at rest from the top from the side using a cylinder stroke of 200 up to mm up to mm up to mm 120

24 27 Package marking Stroke applicators 4014, 4016 pad returned to its initial position. The length of the stroke cylinder Accessories Blow tube Unit to regulate compressed air Pressure-reducing valve Blow-on pad to the surface of a package. Roll-on pad while these packages are in motion. Corner-wrap pad 130 mm Blow-on pad Roll-on pad Corner-wrap pad Technical data 4014 L/R , 4016 L/R L/R State of a package at rest from the top from the side uniform using a cylinder stroke of 200 up to mm up to mm

25 28 Package marking Stroke blow applicator 4614 in terms of package heights. Accessories Blow tube Unit to regulate compressed air Blow-on pad Blow-on pad Technical data 4614 L/R State of a package at rest from the top from the side uniform using a cylinder stroke of 200 up to mm 300 up to mm

26 29 Package marking dispenser tongue using a guide roller. corresponds to the print speed. Draw roller, made of steel a demand module Demand module 5112 L/R 5114 L/R 5116 L/R State of a package in motion from the top from the side 60

27 30 Package marking on plane surfaces to packages in motion. to the point of transfer to a package. Y Vacuum belt applicator on plane surfaces mm from the top from the side mm/s 30 when applying from the side mm Y = 20

28 31 Package marking to the point of transfer to a package. Y Y ma. 10 Vacuum belt applicator from the top from the side uniform 0.3 mm/s when applying from the side mm Y = 20

29 32 Package marking Air jet box 6114 Accessories Blow tube 1 Templatee 1 Air jet box 6114 L/R mm State of a package at rest from the top from the side mm

30 33 Accessories and options provided for applicators standard option Pos. Designation / / / Unit to regulate compressed air Unit to regulate compressed air, Blow tube Unit to regulate compressed air a hose to connect to an applicator's compressed air input Pressure-reducing valve Examples how to assemble a unit to regulate compressed air

31 34 Tools to assemble HERMES Q Pos. Designation HERMES Q2 HERMES Q4.3 HERMES Q4 HERMES Q Mounting plate Mount Adapter plate Base plate Mounting plate Bracket 6.6 y z y y y

32 35 y z Floor stand ,600 mm Floor stand 1601 castors, feet screw clamping Weight kg 36 1,600 mm y diameter 60 mm z Floor stand 1602 Floor stand 1602 feet depths toothed rack, crank toothed rack, handwheel Weight kg Examples how to assemble to a stand from the top from the side from the top from the side

33 Floor stand 1201 so can a warning light. Floor stand 1201 Load up to kg mm

34 38 HERMES Q delivery program Label printers L Pos. Part no. Designation Options Pos. Part no. Designation xxx xxx xxx xxx xxx xxx xxx xxx Label printers R Pos. Part no. Designation if HERMES Q provides options if HERMES Q provides options Scope of HERMES Q label printer delivery Available online do not represent any warranty or guarantee xxx xxx Spacer L xxx Margin stop xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx xxx Draw roller ZS2 Draw roller ZS xxx xxx xxx xxx assembled to the printer.001 delivered separately

35 39 HERMES Q delivery program Accessories Pos. Part no. Designation SD memory card Wear parts Pos. Part no. Designation dpi Warning light 2.10 Label software Pos. Part no. Designation in preparation printed copy Language European Union Assembly instructions Control panel Windows driver cablabel S3 Danish Lithuanian Dutch Swedish Slowenian Spanish Macedonian Turkish Asia Japanese Thai Middle East

36 40 HERMES Q delivery program Applicators L Pos. Part no. Designation Part no. Transfer modules Demand module Demand module Demand module

37 41 HERMES Q delivery program Applicators R Pos. Part no. Designation Part no. Transfer modules Swing stroke applicator Swing stroke applicator Swing stroke applicator Demand module Demand module Demand module

38 42 Accessories and options provided for applicators Pos. Part no. Designation Tools to assemble Pos. Part no. Designation Unit L to regulate compressed air xxxx.212 Unit L to regulate compressed air, xxxx Mounting plate Floor stands Pos. Part no. Designation W/H: H2-006 Sharjah Airport International Free Zone United Arab Emirates multisys@eim.ae