Standardiseringsprosjekter og nye standarder

Transkript

1 Annonseringsdato: Listenummer: 10/2014 Standardiseringsprosjekter og nye standarder Listenummer: 10/2014 Side: 1 av 120

2 01 Generelt. Terminologi. Standardisering. Dokumentasjon 01 Generelt. Terminologi. Standardisering. Dokumentasjon Standardforslag til høring - europeiske (CEN) pren ISO Optikk og fotonikk - Lasere og laserrelatert utstyr - Terminologi og symboler Optics and photonics - Lasers and laser-related equipment - Vocabulary and symbols (ISO/DIS 11145:2014) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 4217 Codes for the representation of currencies Kommentarfrist: ISO/DIS 5681 Equipment for crop protection -- Vocabulary Kommentarfrist: ISO/DIS Data quality -- Part 8: Information and data quality: Concepts and measuring Kommentarfrist: ISO/DIS Optics and optical instruments - Lasers and laser-related equipment - Vocabulary and symbols Kommentarfrist: ISO/DIS Optics and optical instruments - Vocabulary for telescopic systems - Part 1: General terms Kommentarfrist: ISO/DIS Optics and optical instruments - Vocabulary for telescopic systems - Part 2: Terms for binoculars, monoculars and spotting scopes Kommentarfrist: ISO/DIS Pigments, dyestuffs and extenders -- Terminology -- Part 1: General terms Kommentarfrist: ISO-standarder ISO :2014 Vacuum technology -- Vocabulary -- Part 3: Total and partial pressure vacuum gauges Erstatter A00008:20: ISO :2014 Statistics -- Vocabulary and symbols -- Part 4: Survey sampling Listenummer: 10/2014 Side: 2 av 120

3 01 Generelt. Terminologi. Standardisering. Dokumentasjon ISO :2014 Road vehicles -- Standardized repair and maintenance information (RMI) terminology -- Part 2: Standardized process implementation requirements, Registration Authority ISO 22493:2014 Microbeam analysis -- Scanning electron microscopy -- Vocabulary Erstatter A00008:20: Rapporter fra CEN (CR) CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16395:2012 Gas Infrastructure - CEN/TC 234 Pressure Definitions - Guideline Document Fastsatte norske standarder NS-EN 1325:2014 Verdistyring - Vokabular - Termer og definisjoner Value Management - Vocabulary - Terms and definitions NS-EN ISO 12671:2014 Termisk sprøyting - Termisk sprøytede belegg - Symboler for angivelse på tegninger (ISO 12671:2012) Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings (ISO 12671:2012) Tilbaketrukne norske standarder NS-EN :2004 Terminologi for verdiledelse, verdianalyse og funksjonsanalyse - Del 2: Verdiledelse Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management NS-EN :1996 Value management, Value analysis, Functional Analysis vocabulary - Part 1: Value Analysis and Functional Analysis NS-EN 14665:2004 Termisk sprøyting - Termisk sprøytede belegg - Symbolske påføringer på tegninger Thermal spraying - Thermally sprayed coatings - Symbolic representation on drawings Listenummer: 10/2014 Side: 3 av 120

4 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Standardforslag til høring - europeiske (CEN) pren Skjønnhetssalong tjenester - Krav og anbefalinger for levering av tjenesten Beauty Salon Services - Requirements and recommendations for the provision of service Kommentarfrist: pren Health risk assessment of chemicals - Requirements for the provision of training Kommentarfrist: pren Maritime og portsikkerhetstjenester Maritime and port security services Kommentarfrist: pren ISO Innerste pakningsmaterialer til legemidler - Særskilte krav ved bruk av ISO 9001:2008, med referanse til god produksjonspraksis (GMP) Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO/DIS 15378:2014) Kommentarfrist: pren ISO Kollektivtransport - Samordnete billetteringssystemer - Del 1: Arkitektur (ISO/DIS :2014) Public transport - Interoperable fare management system - Part 1: Architecture (ISO/DIS :2014) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO/DIS 4217 Codes for the representation of currencies Kommentarfrist: ISO/DIS Intelligent transport systems -- Curve speed warning systems (CSWS) -- Performance requirements and test procedures Kommentarfrist: ISO/DIS Quality systems -- Medical devices -- System requirements for regulatory purposes Kommentarfrist: ISO/DIS Medical devices -- Quality management systems -- Requirements for regulatory purposes Kommentarfrist: Listenummer: 10/2014 Side: 4 av 120

5 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport ISO/DIS Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: ISO/DIS Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: ISO/DIS Public Transport -- Interoperable Fare Management System -- Part 1: Architecture Kommentarfrist: ISO/DIS Public transport -- Interoperable fare management system -- Part 1: Architecture Kommentarfrist: ISO/DIS Security Management System Kommentarfrist: ISO-standarder ISO :2014 Statistics -- Vocabulary and symbols -- Part 4: Survey sampling ISO/TS 17419:2014 Intelligent transport systems -- Cooperative systems -- Classification and management of ITS applications in a global context ISO/TS 17423:2014 Intelligent transport systems -- Cooperative systems -- ITS application requirements and objectives for selection of communication profiles Rapporter fra CEN (CR) CEN ISO/TS 25110:2013 Intelligente transportsystemer - Elektronisk avgiftsinnkreving - Definisjon av grensesnitt mellom betalingskort og kjøretøyenhet (ISO/DTS 25110:2013) Electronic fee collection - Interface definition for on-board account using integrated circuit card (ICC) (ISO/TS 25110:2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 2: Business practices (ISO/TR :2013) CEN ISO/TR :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) Listenummer: 10/2014 Side: 5 av 120

6 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TR ISO :2013 Public transport - Interoperable fare management system - Part 3: Complementary concepts to Part 1 for multi-application media (ISO/TR :2013) CEN ISO/TS 13141:2010/AC:2013 Electronic fee collection - Localisation augmentation communication for autonomous systems - Technical Corrigendum 1 (ISO/TS 13141:2010/Cor 1:2013) CEN ISO/TS 17419:2014 Intelligente transportsystemer - Sammenvirkende systemer - Klassifisering og administrasjon av ITS-anvendelser i en global kontekst (ISO/TS 17419:2013) Intelligent transport systems - Cooperative systems - Classification and management of ITS applications in a global context (ISO/TS 17419:2014) CEN ISO/TS 17423:2014 Intelligente transportsystemer - Sammenvirkende systemer - Krav og mål for ITS-applikasjoner ved valg av kommunikasjonsprofiler (ISO/DTS 17423:2013) Intelligent transport systems - Cooperative systems - ITS application requirements and objectives for selection of communication profiles (ISO/TS 17423:2014) CEN ISO/TS :2012 Electronic fee collection - Charging performance - Part 1: Metrics (ISO/TS :2012) CEN ISO/TS :2013 Electronic fee collection - Charging performance - Part 2: Examination Framework (ISO/TS :2013) CEN ISO/TS :2010/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 1: Charging - Technical Corrigendum 1 (ISO/TS :2010/Cor 1:2013) CEN ISO/TS :2011/AC:2013 Electronic fee collection - Application interface definition for autonomous systems - Part 3: Context data - Technical Corrigendum 1 (ISO/TS :2011/Cor 1:2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 1: Introduction, numbering and versions (TPEG1-INV) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 2: Syntax, semantics and framing structure (TPEG1-SSF) (ISO/TS :2013) CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 3: Service and network information (TPEG1-SNI) (ISO/TS :2013) Listenummer: 10/2014 Side: 6 av 120

7 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport CEN ISO/TS :2013 Intelligent transport systems - Traffic and travel information via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 7: Parking information (TPEG1-PKI) (ISO/TS ) CEN ISO/TS :2013 Intelligent transport systems - Traffic and Travel Information (TTI) via transport protocol experts group, generation 1 (TPEG1) binary data format - Part 11: Location Referencing Container (TPEG1-LRC) (ISO/TS :2013) CEN/TR 10345:2013 Retningslinje for statistisk data behandling av interlaboratorietester for validering av analysemetoder Guideline for statistical data treatment of inter laboratory tests for validation of analytical methods CEN/TR 16369:2012 Bruk av kontrollkurver ved produksjon av betong Use of control charts in the production of concrete CEN/TR 16405:2013 Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall Intelligent transport systems - ESafety - ECall additional optional data set for heavy goods vehicles ecall CEN/TR 16412:2012 Sikkerhet i leveransekjede - Veiledning for god praksis for små og mellomstore operatører Supply chain security (SCS) - Good practice guide for small and medium sized operators CEN/TS 16316:2012 Postal services - Open interface - Sortplan CEN/TS 16326:2013 Postal Services - Hybrid Mail - Functional Specification for postal registered electronic mail CEN/TS 16406:2013 Intelligente transportsystemer- Kollektivtransport - Indirekte billettinnfrielse for jernbane Intelligent transport systems - Public transport - Indirect Fulfilment for Rail CEN/TS 16454:2013 Intelligente transportsystemer - E-sikkerhet - Ende-til-ende konformitetstesting for automatisk nødanrop (ecall) Intelligent transport systems - ESafety - ECall end to end conformance testing CEN/TS :2013 Innovasjonsstyring - Del 1: System for innovasjonsstyring Innovation Management - Part 1: Innovation Management System CEN/TS 16658:2014 Requirements for establishing manufacturing enterprise process interoperability - Maturity model for assessing enterprise interoperability Listenummer: 10/2014 Side: 7 av 120

8 03 Sosiologi. Tjenester. Bedriftsorganisasjon og -ledelse. Administrasjon. Transport Fastsatte norske standarder NS-EN 1325:2014 Verdistyring - Vokabular - Termer og definisjoner Value Management - Vocabulary - Terms and definitions NS-ISO 10001:2007 Kvalitetsstyring - Kundetilfredshet - Retningslinjer for atferdsregler for organisasjoner Quality management - Customer satisfaction - Guidelines for codes of conduct for organizations NS-ISO/IEC :2011 Informasjonsteknologi - Serviceledelse - Del 1: Systemkrav til serviceledelse Information technology - Service management - Part 1: Service management system requirements NS-ISO/IEC :2012 Informasjonsteknologi - Serviceledelse - Del 2: Veiledning i anvendelse av serviceledelsessystemer Information technology - Service management - Part 2: Guidance on the application of service management systems NS-ISO/IEC :2012 Informasjonsteknologi - Serviceledelse - Del 3: Veiledning i anvendelsesområdet for og anvendeligheten av ISO/IEC Information technology - Service management - Part 3: Guidance on scope definition and applicability of ISO/IEC NS-ISO/IEC 27013:2012 Informasjonsteknologi - Sikringsteknikker - Veiledning for integrert implementering av ISO/IEC og ISO/IEC Information technology - Security techniques - Guidance on the integrated implementation of ISO/IEC and ISO/IEC Tilbaketrukne norske standarder NS-EN :2004 Terminologi for verdiledelse, verdianalyse og funksjonsanalyse - Del 2: Verdiledelse Value Management, Value Analysis, Functional Analysis vocabulary - Part 2: Value Management NS-EN :1996 Value management, Value analysis, Functional Analysis vocabulary - Part 1: Value Analysis and Functional Analysis 07 Matematikk. Naturvitenskap Standardforslag til høring - europeiske (CEN) pren ISO Microbiology of the food chain - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 1: Horizontal method for the detection of Salmonella spp. (ISO/DIS :2014) Kommentarfrist: Listenummer: 10/2014 Side: 8 av 120

9 07 Matematikk. Naturvitenskap ISO-standarder ISO 16457:2014 Space systems -- Space environment (natural and artificial) -- The Earth's ionosphere model: international reference ionosphere (IRI) model and extensions to the plasmasphere Erstatter A00008:20: ISO/TR 16197:2014 Nanotechnologies -- Compilation and description of toxicological screening methods for manufactured nanomaterials ISO/TS :2009 Microbiology of food and animal feeding stuffs -- Guidelines on preparation and production of culture media -- Part 1: General guidelines on quality assurance for the preparation of culture media in the laboratory Erstatter A00008:20: ISO/TS 16550:2014 Nanotechnologies -- Determination of silver nanoparticles potency by release of muramic acid from Staphylococcus aureus Rapporter fra CEN (CR) CEN ISO/TR 11811:2012 Nanotechnologies - Guidance on methods for nano- and microtribology measurements (ISO/TR 11811:2012) CEN ISO/TS :2012 Microbiology of food and animal feed - Horizontal method for the detection, enumeration and serotyping of Salmonella - Part 2: Enumeration by a miniaturized most probable number technique (ISO/TS :2012) CEN ISO/TS 13136:2012 Microbiology of food and animal feed - Real-time polymerase chain reaction (PCR)-based method for the detection of food-borne pathogens - Horizontal method for the detection of Shiga toxin-producing Escherichia coli (STEC) and the determination of O157, O111, O26, O103 and O145 serogroups (ISO/TS 13136:2012) CEN ISO/TS 13830:2013 Nanotechnologies - Guidance on voluntary labelling for consumer products containing manufactured nano-objects (ISO/TS 13830:2013) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 1: Metode for kvantitative bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 1: Method for quantification (ISO/TS :2013, Corrected Version ) CEN ISO/TS :2013 Fôr- og nærimgsmiddelmikrobiologi Horisontal metode for bestemmelse av hepatitt A virus og norovirus i mat ved bruk av sanntids RT-PCR Del 2: Metode for kvalitativ bestemmelse (ISO/DTS :2012) Microbiology of food and animal feed - Horizontal method for determination of hepatitis A virus and norovirus in food using realtime RT-PCR - Part 2: Method for qualitative detection (ISO/TS :2013, Corrected Version ) Listenummer: 10/2014 Side: 9 av 120

10 07 Matematikk. Naturvitenskap CEN ISO/TS 17919:2013 Fôr-, miljø- og næringsmiddelmikrobiologi prøver - Polymerasekjedereaksjon (PCR) for påvisning av matbårne patogener Bestemmelse av nevrotoksinproduserende clostridium type A, B, E og F (ISO/TS 17919:2013) Microbiology of the food chain - Polymerase chain reaction (PCR) for the detection of food-borne pathogens - Detection of botulinum type A, B, E and F neurotoxin-producing clostridia (ISO/TS 17919:2013) CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 1: Reference model Geographic information - Spatial data infrastructures - Part 1: Reference model CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 2: Best practices Geographic information - Spatial data infrastructures - Part 2: Best practices CEN/TR :2012 Geographic information - Spatial data infrastructures - Part 3: Data centric view Geographic information - Spatial data infrastructures - Part 3: Data centric view CEN/TR 16469:2013 Hydrometry - Measurement of the rainfall intensity (liquid precipitation): requirements, calibration methods and field measurements CEN/TR 16588:2014 Manual measurement of snow water equivalent CEN/TS :2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment Fastsatte norske standarder NS-EN ISO :2013/AC:2014 Rettelsesblad AC - Fôr- og næringsmiddelmikrobiologi - Horisontal metode for telling av mikroorganismer - Del 2: Kolonitelling ved 30 C ved overflateutsæd - Teknisk rettelsesblad 1 (ISO :2013/Cor 1:2014) Corrigendum AC - Microbiology of the food chain - Horizontal method for the enumeration of microorganisms - Part 2: Colony count at 30 degrees C by the surface plating technique - Technical Corrigendum 1 (ISO :2013/Cor 1:2014) NS-EN ISO 17994:2014 Vannundersøkelse - Krav til sammenligning av relativ gjenvinning av mikroorganismer ved to kvantitative metoder (ISO 17994:2014) Water quality - Requirements for the comparison of the relative recovery of microorganisms by two quantitative methods (ISO 17994:2014) Tilbaketrukne norske standarder NS-EN ISO 17994:2004 Vannundersøkelse - Kriterier for å dokumentere likeverdighet mellom mikrobiologiske metoder (ISO 17994:2004) Water quality - Criteria for establishing equivalence between microbiological methods (ISO 17994:2004) Listenummer: 10/2014 Side: 10 av 120

11 11 Helsevesen, Teknikk 11 Helsevesen, Teknikk Standardforslag til høring - europeiske (CEN) EN ISO :2009/prA1 Injeksjonsbeholdere og tilbehør - Del 1: Hetteglass laget av glassrør (ISO :2009/DAM 1:2014) Injection containers and accessories - Part 1: Injection vials made of glass tubing (ISO :2009/DAM 1:2014) Kommentarfrist: pren Antimikrobielle bandasjer - Krav og prøvingsmetoder Antimicrobial wound dressings - Requirements and test methods Kommentarfrist: pren ISO Tannpleie - Endodontiske instrumenter - Del 3: Press: Trykklufthamre og spredere (ISO/DIS :2014) Dentistry - Endodontic instruments - Part 3: Compactors: pluggers and spreaders (ISO/DIS :2014) Kommentarfrist: pren ISO 5361 rev Anaesthetic and respiratory equipment - Tracheal tubes and connectors (ISO/DIS 5361:2014) Kommentarfrist: pren ISO 5364 rev Anaesthetic and respiratory equipment - Oropharyngeal airways (ISO/DIS 5364:2014) Kommentarfrist: pren ISO Cardiovascular implants - Cardiac valve prostheses - Part 1: General requirements (ISO/DIS :2014) Kommentarfrist: pren ISO Cardiovascular implants - Cardiac valve prostheses - Part 2: Surgically implanted heart valve substitutes (ISO/DIS :2014) Kommentarfrist: pren ISO rev Dentistry - Dental units - Part 2: Media channels and connections (ISO/DIS :2013) Kommentarfrist: pren ISO Dentistry - Dental units - Part 2: Air, water, suction and wastewater system (ISO/DIS :2014) Kommentarfrist: pren ISO Dentistry - Compatibility testing - Part 2: Ceramic-ceramic systems (ISO/DIS :2014) Kommentarfrist: Listenummer: 10/2014 Side: 11 av 120

12 11 Helsevesen, Teknikk pren ISO rev Dentistry - Powered polymerization activators (ISO/DIS 10650:2014) Kommentarfrist: pren ISO rev Oftalmisk optikk - Diagramskjermer for synsskarphetsmålinger - Trykt, anslått og elektronisk (ISO/DIS 10938:2014) Ophthalmic optics - Chart displays for visual acuity measurements - Printed, projected and electronic (ISO/DIS 10938:2014) Kommentarfrist: pren ISO rev Lasere og laserrelatert utstyr - Prøvingsmetoder og klassifikasjon av laserresistente operasjonsduker og/eller beskyttende pasientvern - Primær antenning, penetrasjon, flammespredning og videregående tenning (ISO/DIS 11810:2014) Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO/DIS 11810:2014) Kommentarfrist: pren ISO Cardiovascular implants and extracorporeal systems - Vascular device-drug combination products - Part 1: General requirements (ISO/DIS :2014) Kommentarfrist: pren ISO rev Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) (ISO/DIS 13356:2014) Kommentarfrist: pren ISO Medical devices - Quality management systems - Requirements for regulatory purposes (ISO/DIS 13485:2014) Kommentarfrist: pren ISO rev Trakealtuber utformet for laserkirurgi - Krav til merking og medfølgende informasjon (ISO/DIS 14408:2014) Tracheal tubes designed for laser surgery - Requirements for marking and accompanying information (ISO/DIS 14408:2014) Kommentarfrist: pren ISO Oftalmiske instrumenter - Grunnleggende krav og prøvingsmetoder - Del 2: Lett risiko beskyttelse (ISO/DIS :2014) Ophthalmic instruments - Fundamental requirements and test methods - Part 2: Light hazard protection (ISO/DIS :2014) Kommentarfrist: pren ISO Innerste pakningsmaterialer til legemidler - Særskilte krav ved bruk av ISO 9001:2008, med referanse til god produksjonspraksis (GMP) Primary packaging materials for medicinal products - Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) (ISO/DIS 15378:2014) Kommentarfrist: Listenummer: 10/2014 Side: 12 av 120

13 11 Helsevesen, Teknikk pren ISO Vaskedekontaminatorer - Del 7: Invasive, ikke-kritiske termo medisinsk utstyr og helseutstyr (ISO/DIS :2014) Washer-disinfectors - Part 7: Invasive, non-critical thermolabile medical devices and healthcare equipment (ISO/DIS :2014) Kommentarfrist: pren ISO rev Dentistry - Casting investments and refractory die materials (ISO 15912:2006) Kommentarfrist: pren ISO rev Øyeoptikk - Skyllevæske for øyeoperasjoner (ISO/DIS 16671:2014) Ophthalmic implants - Irrigating solutions for ophthalmic surgery (ISO/DIS 16671:2014) Kommentarfrist: pren ISO rev Oftalmiske implantater - Ocular endotamponades (ISO/DIS 16672:2014) Ophthalmic implants - Ocular endotamponades (ISO/DIS 16672:2014) Kommentarfrist: pren ISO Dentistry - Test methods for evaluating antibacterial biofilm treatment methods for dental unit water delivery systems (ISO/DIS 16954:2014) Kommentarfrist: pren ISO Dentistry - Osteotome for bone compaction and sinus floor elevation (ISO/DIS 17937:2014) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2008/DAmd 1 Annex G Kommentarfrist: ISO/DIS Dentistry -- Endodontic instruments -- Part 3: Compactors: pluggers and spreaders Kommentarfrist: ISO/DIS 5361 Tracheal tubes and connectors (Revision of ISO 5361 parts 1 to 5 and ISO 7228:1993) Kommentarfrist: ISO/DIS 5364 Anaesthetic and respiratory equipment - Oropharyngeal airways (Revision of second edition (ISO 5364:1986) Kommentarfrist: Listenummer: 10/2014 Side: 13 av 120

14 11 Helsevesen, Teknikk ISO/DIS Dentistry -- Dental units -- Part 2: Air, water, suction and wastewater system Kommentarfrist: ISO/DIS Dentistry -- Compatibility testing -- Part 2: Ceramic-ceramic systems Kommentarfrist: ISO/DIS Ophthalmic instruments - Chart projectors Kommentarfrist: ISO/DIS Lasers and laser-related equipment - Surgical drapes and patient protective covers suitable for use with lasers Kommentarfrist: ISO/DIS Implants for surgery - Ceramic materials based on yttria-stabilized tetragonal zirconia (Y-TZP) Kommentarfrist: ISO/DIS Quality systems -- Medical devices -- System requirements for regulatory purposes Kommentarfrist: ISO/DIS Medical devices -- Quality management systems -- Requirements for regulatory purposes Kommentarfrist: ISO/DIS Ophthalmic instruments -- Fundamental requirements and test methods -- Part 2: Light hazard protection Kommentarfrist: ISO/DIS Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2000, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: ISO/DIS Primary packaging materials for medicinal products -- Particular requirements for the application of ISO 9001:2008, with reference to Good Manufacturing Practice (GMP) Kommentarfrist: ISO/DIS Washer-disinfectors -- Part 7: Requirements and tests for washer-disinfectors employing chemical disinfection for non-invasive, non-critical thermolabile medical devices and healthcare equipment (ISO/DIS :2014) Kommentarfrist: Listenummer: 10/2014 Side: 14 av 120

15 11 Helsevesen, Teknikk ISO/DIS Medical devices -- Recognized essential principles of safety and performance of medical devices -- Part 1: General essential principles and additional specific essential principles for all non-ivd medical devices and guidance on the selection of standards Kommentarfrist: ISO/DIS Tannpleie - Munnhygieneprodukter - munnskyllevæske Dentistry -- Oral hygiene products -- Oral rinses Kommentarfrist: ISO/DIS Øye optikk - Skyllevæske for øyeoperasjoner Ophthalmic implants -- Irrigating solutions for ophthalmic surgery Kommentarfrist: ISO/DIS Ophthalmic implants - Ocular endotamponades Kommentarfrist: ISO/DIS Dentistry -- Test methods for evaluating antibacterial biofilm treatment methods for dental unit water delivery systems Kommentarfrist: ISO/DIS Dentistry -- Osteotome for bone compaction and sinus floor elevation Kommentarfrist: ISO-standarder ISO :2014 Medical suction equipment -- Part 2: Manually powered suction equipment Erstatter A00008:20: ISO :2014 Medical suction equipment -- Part 3: Suction equipment powered from a vacuum or positive pressure gas source Erstatter A00008:20: ISO/TR 37137:2014 Cardiovascular biological evaluation of medical devices -- Guidance for absorbable implants ISO/TS 16775:2014 Packaging for terminally sterilized medical devices -- Guidance on the application of ISO and ISO ISO/TS 17137:2014 Cardiovascular implants and extracorporeal systems -- Cardiovascular absorbable implants Listenummer: 10/2014 Side: 15 av 120

16 11 Helsevesen, Teknikk Rapporter fra CEN (CR) CEN ISO/TS 16775:2014 Packaging for terminally sterilized medical devices - Guidance on the application of ISO and ISO (ISO 16775:2014) CEN/TR 16386:2013 Tannpleie - Retningslinjer for håndtering methacrylate-baserte materialer i dentalt laboratorium Dentistry - Guidelines for handling methacrylate-based materials in the dental laboratory CEN/TR 16427:2013 Intelligente transportsystemer - Kollektivtransport - Informasjon til brukere med synshemming Intelligent transport systems - Public transport - Traveller Information for Visually Impaired People (TI-VIP) CEN/TS 16677:2014 Øyeoptikk - Referansemetode for prøving av nikkelavgivelse fra brilleinnfatninger og solbriller Ophthalmic optics - Reference method for the testing of spectacle frames and sunglasses for nickel release Fastsatte norske standarder NS-EN 12183:2014 Manuelt drevne rullestoler - Krav og prøvingsmetoder Manual wheelchairs - Requirements and test methods NS-EN 12184:2014 Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods NS-EN 14683:2014 Medisinske ansiktsmasker - Krav og prøvingsmetoder Medical face masks - Requirements and test methods NS-EN ISO 21536:2009/A1:2014 Endringsblad A1 - Ikke-aktive kirurgiske implantater - Implantater til erstatning av ledd - Spesielle krav for kneleddsimplantater (ISO 21536:2007/Amd 1:2014) Amendment A1 - Non-active surgical implants - Joint replacement implants - Specific requirements for knee-joint replacement implants (ISO 21536:2007/Amd 1:2014) Tilbaketrukne norske standarder NS-EN 12183:2009 Manuelt drevne rullestoler - Krav og prøvingsmetoder Manual wheelchairs - Requirements and test methods Listenummer: 10/2014 Side: 16 av 120

17 11 Helsevesen, Teknikk NS-EN 12184:2009 Elektrisk drevne rullestoler, scootere og deres batteriladere - Krav og prøvingsmetoder Electrically powered wheelchairs, scooters and their chargers - Requirements and test methods NS-EN 14683:2005 Kirurgiske munnbind - Krav og prøvingsmetoder Surgical masks - Requirements and test methods 13 Miljøvern. Helsevern. Sikkerhet Standardforslag til høring - europeiske (CEN) pren rev Fire detection and fire alarm systems - Part 13: Compatibility and connectability assessment of system components Kommentarfrist: pren Fire detection and fire alarm systems - Part 20: Aspirating smoke detectors Kommentarfrist: pren Safety rules for the construction and installation of lifts - Particular applications for passenger and goods passenger lifts - Part 73: Behaviour of lifts in the event of fire Kommentarfrist: pren Furniture - Assessment of the ignitability of mattresses and upholstered bedbases - Part 1: Ignition source smouldering cigarette Kommentarfrist: pren Furniture - Assessment of the ignitability of mattresses and upholstered bed base - Part 2: Ignition source: match flame equivalent Kommentarfrist: pren 1420 rev Influence of organic materials on water intended for human consumption - Determination of odour and flavour assessment of water in piping systems - Determination of odour and flavour assessment of water in piping systems Kommentarfrist: pren Road traffic noise reducing devices - Non-acoustic performance - Part 3: Reaction to fire - Burning behaviour of noise reducing devices and classification Kommentarfrist: Listenummer: 10/2014 Side: 17 av 120

18 13 Miljøvern. Helsevern. Sikkerhet pren 1839 Determination of explosion limits of gases and vapours and determination of the limiting oxygen concentration (LOC) for flammable gases and vapours Kommentarfrist: pren rev Workshop fabricated steel tanks - Part 1: Horizontal cylindrical single skin and double skin tanks for the underground storage of flammable and nonflammable water polluting liquids Kommentarfrist: pren Vernesko for motorsyklister - Krav og prøvingsmetoder Protective footwear for motorcycle riders - Requirements and test methods Kommentarfrist: pren Ergonomics - A methodology for work analysis to support design Kommentarfrist: pren Bærbart utstyr for spredning av slokkemidler ved hjelp av brannpumper - Bærbart skumutstyr - Del 1: Inductors PN 16 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 1: Inductors PN 16 Kommentarfrist: pren Bærbart utstyr for spredning av slokkemidler ved hjelp av brannpumper - Bærbart skumutstyr - Del 2: Pick-up rør Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 2: Pick-up tubes Kommentarfrist: pren Bærbart utstyr for spredning av slokkemidler ved hjelp av brannpumper - Bærbart skumutstyr - Del 3: Lav og middels ekspansjonshåndholdt skumgrenrør PN 16 Portable equipment for projecting extinguishing agents supplied by fire fighting pumps - Portable foam equipment - Part 3: Low and medium expansion handheld foam branchpipes PN 16 Kommentarfrist: pren Fjellklatringsutstyr - Avalanche airbag-systemer - Sikkerhetskrav og prøvingsmetoder Mountaineering equipment - Avalanche airbag systems - Safety requirements and test methods Kommentarfrist: pren Characterization of sludges - Physical consistency - Part 1: Determination of flowability - Method by extrusion tube apparatusr Kommentarfrist: Listenummer: 10/2014 Side: 18 av 120

19 13 Miljøvern. Helsevern. Sikkerhet pren Characterization of sludges - Physical consistency - Part 2: Determination of solidity - Method by pocket vane shear apparatus Kommentarfrist: pren Reaction to fire tests for building products - Determination of a building product's propensity to undergo continuous smouldering Kommentarfrist: pren Emission safety of combustible air fresheners - Test methods Kommentarfrist: pren Emission safety of combustible air fresheners - Methodology for the assessment of test results and application of recommended emission limits - Complementary element Kommentarfrist: pren Emission safety of combustible air fresheners - User safety information - Complementary element Kommentarfrist: pren Maritime og portsikkerhetstjenester Maritime and port security services Kommentarfrist: pren Durability of reaction to fire performance - Classes of fire-retardant treated wood products in interior and exterior end use applications Kommentarfrist: pren ISO Ergonomics of human-system interaction - Part 161: Guidance on visual user-interface elements (ISO/DIS :2014) Kommentarfrist: pren ISO rev Lasere og laserrelatert utstyr - Prøvingsmetoder og klassifikasjon av laserresistente operasjonsduker og/eller beskyttende pasientvern - Primær antenning, penetrasjon, flammespredning og videregående tenning (ISO/DIS 11810:2014) Lasers and laser-related equipment - Test method and classification for the laser resistance of surgical drapes and/or patient protective covers - Primary ignition, penetration, flame spread and secondary ignition (ISO/DIS 11810:2014) Kommentarfrist: pren ISO rev Maskinsikkerhet - Nødstopp - Hovedprinsipper for konstruksjon (ISO/DIS 13850:2014) Safety of machinery - Emergency stop - Principles for design (ISO/DIS 13850:2014) Kommentarfrist: Listenummer: 10/2014 Side: 19 av 120

20 13 Miljøvern. Helsevern. Sikkerhet pren ISO Geotechnical investigation and testing - Laboratory testing of soil - Part 3: Determination of particle density (ISO/DIS :2014) Kommentarfrist: pren ISO Geotechnical investigation and testing - Laboratory testing of soil - Part 4: Determination of particle size distribution (ISO/DIS :2014) Kommentarfrist: pren ISO Maskinsikkerhet - Forebyggende brannvern og beskyttelse (ISO/DIS 19353:2014) Safety of machinery - Fire prevention and protection (ISO/DIS 19353:2014) Kommentarfrist: Standardforslag til høring - internasjonale (ISO) ISO :2007/DAmd 1 Kommentarfrist: ISO/DIS 7165 Fire protection equipment - Portable fire extinguishers - Performances and construction Kommentarfrist: ISO/DIS Fire detection and alarm systems -- Part 8: Carbon monoxide fire detectors using an electro-chemical cell in combination with a heat sensor Kommentarfrist: ISO/DIS Measurement of radioactivity - Measurement and evaluation of surface contamination -- Part 1: General principles Kommentarfrist: ISO/DIS Measurement of radioactivity - Measurement and evaluation of surface contamination -- Part 2: Test method using wipe-test samples Kommentarfrist: ISO/DIS Measurement of radioactivity - Measurement and evaluation of surface contamination -- Part 3: Apparatus calibration Kommentarfrist: ISO/DIS Evaluation of surface contamination - Part 3: Isomeric transition and electron capture emitters, low energy beta emitters Kommentarfrist: ISO/DIS Ergonomics of human-system interaction -- Part 161: Guidance on visual user-interface elements Kommentarfrist: Listenummer: 10/2014 Side: 20 av 120

21 13 Miljøvern. Helsevern. Sikkerhet ISO/DIS Utstyr for brannvern - Mobile slokkere - Krav til ytelse og utførelse Fire protection equipment - Wheeled extinguishers - Performance and construction requirements Kommentarfrist: ISO/DIS Lasers and laser-related equipment - Surgical drapes and patient protective covers suitable for use with lasers Kommentarfrist: ISO/DIS Safety of machinery - Emergency stop equipment, functional aspects - Principles for design Kommentarfrist: ISO/DIS Safety of machinery -- Emergency stop function -- Principles for design Kommentarfrist: ISO/DIS Radiological protection -- Procedures for monitoring the dose to the lens of the eye, the skin and the extremities Kommentarfrist: ISO/DIS Stationary source emissions -- Sampling and determination of selenium compounds in flue gas Kommentarfrist: ISO/DIS Measurement of radioactivity in the environment -- Soil -- Part 2: Guidance for the selection of the sampling strategy, sampling and pre-treatment of samples Kommentarfrist: ISO/DIS Safety of machinery -- Fire prevention and protection Kommentarfrist: ISO/DIS Safety of machinery -- Fire prevention and protection Kommentarfrist: ISO/DIS Analyse av gasser fra brann ved bruk av Fourier infrarød teknikk (FITR) Analysis of fire gases using Fourier infra-red technique (FTIR) Kommentarfrist: ISO/DIS Guidance for sampling and analysis of toxic gases and vapours in fire effluents using Fourier Transform Infrared spectroscopy (FTIR) Kommentarfrist: Listenummer: 10/2014 Side: 21 av 120

22 13 Miljøvern. Helsevern. Sikkerhet ISO-standarder ISO :2014 Fire protection -- Automatic sprinkler systems -- Part 10: Requirements and test methods for domestic sprinklers Erstatter A00008:20: ISO :2014 Fire protection -- Foam fire extinguishing systems -- Part 5: Fixed compressed air foam equipment ISO :2014 Fire detection and alarm systems -- Part 1: General and definitions Erstatter A00008:20: ISO :2014 Fire detection and alarm systems -- Part 12: Line type smoke detectors using a transmitted optical beam Erstatter A00008:20: ISO :2014 Water quality -- Radium Part 2: Test method using emanometry ISO 20346:2014 Personal protective equipment -- Protective footwear Erstatter A00008:20:032391,A00008:20:042261,A00008:20:043214,A00008:20: ISO/TR 17755:2014 Fire safety -- Overview of national fire statistics practices ISO/TR 18105:2014 Soil quality -- Detection of water soluble chromium(vi) using a ready-to-use test-kit method ISO/TS 14071:2014 Environmental management -- Life cycle assessment -- Critical review processes and reviewer competencies: Additional requirements and guidelines to ISO 14044:2006 ISO/TS :2014 Respiratory protective devices -- Human factors -- Part 6: Psycho-physiological effects Rapporter fra CEN (CR) CEN ISO/TR 12296:2013 Ergonomics - Manual handling of people in the healthcare sector (ISO/TR 12296:2012) CEN ISO/TS :2012/AC:2012 Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding - Technical Corrigendum 1 (ISO/TS :2012/Cor 1:2012) Listenummer: 10/2014 Side: 22 av 120

23 13 Miljøvern. Helsevern. Sikkerhet CEN ISO/TR 18690:2012 Guidance for the selection, use and maintenance of safety and occupational footwear and other personal protective equipment offering foot and leg protection (ISO/TR 18690:2012) CEN ISO/TR :2011/A1:2013 Basic human body measurements for technological design - Part 2: Statistical summaries of body measurements from national populations (ISO/TR :2010/Amd 1:2013) CEN ISO/TR :2013 Ergonomics of human-system interaction - Part 331: Optical characteristics of autostereoscopic displays (ISO/TR :2012) CEN ISO/TS :2012 Helse og sikkerhet innen sveising og beslektede metoder - Laboratoriemetode for prøvetaking av røyk og gasser - Del 6: Prosedyre for kvantitativ bestemmelse av røyk og gasser ved motstandssveising (ISO/DTS :2011) Health and safety in welding and allied processes - Laboratory method for sampling fume and gases - Part 6: Procedure for quantitative determination of fume and gases from resistance spot welding (ISO/TS :2012) CEN/TR 15120:2013 Tanker for transport av farlig gods - Retningslinjer og anbefalinger for lasting, transport og lossing Tanks for transport of dangerous goods - Guidance and recommendations for loading, transport and unloading CEN/TR 15350:2013 Mekaniske vibrasjoner - Retningslinjer for vurdering av eksponering for hånd-arm overførte vibrasjoner ved bruk av tilgjengelig informasjon inkludert informasjon fra maskinprodusenter Mechanical vibration - Guideline for the assessment of exposure to hand-transmitted vibration using available information including that provided by manufacturers of machinery CEN/TR :2012 Workplace exposure - Guide for the use of direct-reading instruments for aerosol monitoring - Part 3: Evaluation of airborne particle concentrations using photometers CEN/TR 16193:2013 Sludge, treated biowaste and soil - Detection and enumeration of Escherichia coli CEN/TR 16363:2012 Characterization of waste - Kinetic testing for assessing acid generation potential of sulfidic waste from extractive industries CEN/TR 16364:2012 Materialers påvirkning på drikkevann - Påvirkning ved migrering - Prediksjon av migrering fra organiske materialer ved bruk av matematisk modellering Influence of materials on water intended for human consumption - Influence due to migration - Prediction of migration from organic materials using mathematical modelling CEN/TR 16365:2012 Karakterisering av avfall - Prøvetaking av avfall fra bergindustri Characterization of waste - Sampling of waste from extractive industries Listenummer: 10/2014 Side: 23 av 120

24 13 Miljøvern. Helsevern. Sikkerhet CEN/TR 16376:2012 Karakterisering av avfall - Generell veileder for karakterisering av avfall fra bergindustrien Characterization of waste - Overall guidance document for characterization of waste from the extractive industries CEN/TR 16388:2012 Gas-Specific Environmental Document - Guideline for incorporating within standards to minimize the environmental impact of gas infrastructure across the whole life cycle CEN/TR 16391:2012 Mekaniske vibrasjoner og støt - Håndoverførte vibrasjoner - Virkning av koplingskrefter ved hånd-maskin grenseflaten for evaluering av eksponering Mechanical vibration and shock - Hand-transmitted vibration - Influence of coupling forces at the hand-machine interface on exposure evaluation CEN/TR 16456:2013 Karakterisering av slam Veiledning for avvanning av slam Characterization of sludges - Good practice of sludge dewatering CEN/TR 16663:2014 Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Wooden commodities exposed in Use Class 3 (Not covered, not in contact with the ground) - Semi-field method CEN/TR 16705:2014 Perimeter protection - Performance classification methodology CEN/TS :2012 Tre-og trebaserte produkters holdbarhet - Vurdering av utslipp fra behandlet tre til omgivelsene - Del 2: Trevarer eksponert i bruksklasse 4 og 5 (i kontakt med grunnen, ferskvann og sjøvann) - Laboratoriemetode Durability of wood and wood-based products - Determination of emissions from preservative treated wood to the environment - Part 2: Wooden commodities exposed in Use Class 4 or 5 (in contact with the ground, fresh water or sea water) - Laboratory method CEN/TS :2013 Winter maintenance equipment - Road weather information systems - Part 4: Test methods for stationary equipment CEN/TS 15862:2012 Karakterisering av avfall - Samsvarsutlekkingsprøving - Ett-trinns utlekkingsprøving for monolitter ved fastsatt væske til overflateforhold (L/A) for prøve med fastsatt minimumsdimensjon Characterisation of waste - Compliance leaching test - One stage batch leaching test for monoliths at fixed liquid to surface area ratio (L/A) for test portions with fixed minimum dimensions CEN/TS 15863:2012 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med periodisk fornyelse av utlekkingsvæske under fastsatte prøvingsbetingelser Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with periodic leachant renewal, under fixed test conditions Listenummer: 10/2014 Side: 24 av 120

25 13 Miljøvern. Helsevern. Sikkerhet CEN/TS 15864:2012 Karakterisering av avfall - Prøving av utlekkingsegenskaper for basiskarakterisering - Dynamisk monolitisk utlekkingsprøving med kontinuerlig fornyelse av utlekkingsvæske under betingelser relevant for spesifiserte scenario(er) Characterisation of waste - Leaching behaviour test for basic characterisation - Dynamic monolithic leaching test with continuous leachant renewal under conditions relevant for specified scenario(s) CEN/TS 15937:2013 Slam, behandlet organisk avfall og jord - Bestemmelse av spesifikk elektrisk konduktivitet Sludge, treated biowaste and soil - Determination of specific electrical conductivity CEN/TS 16010:2013 Plast - Resirkulert plast - Prøvingsprosedyrer for plastavfall og returmateriale Plastics - Recycled plastics - Sampling procedures for testing plastics waste and recyclates CEN/TS 16011:2013 Plast - Resirkulert plast - Preparering av prøver Plastics - Recycled plastics - Sample preparation CEN/TS 16023:2013 Characterization of waste - Determination of gross calorific value and calculation of net calorific value CEN/TS 16170:2012 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i optisk emisjonsspektrometri (ICP-OES) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma optical emission spectrometry (ICP-OES) CEN/TS 16171:2012 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer ved bruk av induktorkoplet plasma i massespektrometri (ICP- MS) Sludge, treated biowaste and soil - Determination of elements using inductively coupled plasma mass spectrometry (ICP-MS) CEN/TS 16172:2013 Slam, behandlet organisk avfall og jord - Bestemmelse av sporstoffer - Grafittovn med atomabsorpsjonsspektrometri (GF-AAS) Sludge, treated biowaste and soil - Determination of elements using graphite furnace atomic absorption spectrometry (GF-AAS) CEN/TS :2013 Slam, behandlet organisk avfall og jord - bestemmelse av kvikksølv i kongevann- og salpetersyreblanding - Del 1: Kalddampatomabsorpsjonsspektrometri Sludge, treated biowaste and soil - Determination of mercury - Part 1: Cold-vapour atomic absorption spectrometry (CV-AAS) CEN/TS :2013 Slam, behandlet organisk avfall og jord - Bestemmelse av kvikksølv - Del 2: Kalddampatomfluorescensspektrometri (CV-AFS) Sludge, treated biowaste and soil - Determination of mercury - Part 2: Cold-vapour atomic fluorescence spectrometry (CV-AFS) CEN/TS 16181:2013 Sludge, treated biowaste and soil - Determination of polycyclic aromatic hydrocarbons (PAH) by gas chromatography (GC) and high performance liquid chromatography (HPLC) Listenummer: 10/2014 Side: 25 av 120

26 13 Miljøvern. Helsevern. Sikkerhet CEN/TS 16201:2013 Sludge, treated biowaste and soil - Determination of viable plant seeds and propagules CEN/TS 16202:2013 Sludge, treated biowaste and soil - Determination of impurities and stones CEN/TS 16415:2013 Personal fall protection equipment - Anchor devices - Recommendations for anchor devices for use by more than one person simultaneously CEN/TS 16429:2013 Stationary source emissions - Sampling and determination of hydrogen chloride content in ducts and stacks - Infrared analytical technique CEN/TS 16450:2013 Luftundersøkelse - Uteluft - Automatiserte målesystemer til måling av svevestøvkonsentrasjonen (PM10, PM2,5) Ambient air - Automated measuring systems for the measurement of the concentration of particulate matter (PM10; PM2,5) CEN/TS 16459:2013 External fire exposure of roofs and roof coverings - Extended application of test results from CEN/TS 1187 CEN/TS 16516:2013 Construction products - Assessment of release of dangerous substances - Determination of emissions into indoor air CEN/TS 16524:2013 Mekaniske produkter - Ecodesign metodikk Mechanical products - Methodology for reduction of environmental impacts in product design and development CEN/TS 16595:2013 CBRN - Vulnerability Assessment and Protection of People at Risk CEN/TS 16640:2014 Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method CEN/TS 16645:2014 Ambient air - Method for the measurement of benz[a]anthracene, benzo[b]fluoranthene, benzo[j]fluoranthene, benzo[k]fluoranthene, dibenz[a,h]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene Fastsatte norske standarder NS-EN 71-2:2011+A1:2014 Sikkerhet for leketøy - Del 2: Flambarhet Safety of toys - Part 2: Flammability Listenummer: 10/2014 Side: 26 av 120